|
| 1 | Plaster (to wall, floor, etc.) with sand and cement mortar including rounding off or chamfering corners, as directed and racking out joints roughening of concrete surface including chipping and application of cement slurry where necessary etc. complete. |
| 2 | With 6:1 cement mortar. |
| 3 | 15 mm thick plaster (Out side) in Ground Floor |
| 4 | Neat cement punning about 1.5 mm thick in wall , dado, drain etc. |
| 5 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. |
| 6 | One Coat (Ground Floor) |
| 7 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as equired. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Normal Acrylic Emulsion. |
| 8 | Two Coat / Ground floor |
| 9 | Supplying fitting and fixing windows and ventilators with or without integrated grills conforming to I.S. 1038 -1975 and manufactured from rolled steel sections conforming to I.S. to 7452 - 1974 with non friction projection, straightnening if required, fixing lugs in cement concrete (4:2:1) with stone chips 19 mm down , cutting holes and mending good damages to match wuth existing surface complete in all respect excluding glazing. |
| 10 | Opeanable steel windows as per I.S. sizes with side hung shutters and horizontal glazing bars , with or without fixed type ventilators |
| 11 | Two point nose steel hande including fitting and fixing. |
| 12 | Steel peg stay 300 mm long including fitting and fixing. |
| 13 | M.S inegrated griil as per approved design integrated with steel window or ventilator, joints continuosly welded with M.S. flats and bars. |
| 14 | M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge. |
| 15 | Supplying 1.5 mm thick M.S. Sheet fitted and fix at one or Both faces of M.S. / W.I Gate etc. with point weldeing not more than 150 mm apart complete inall respect as per design including cost of all labour & materials. |
| 16 | Priming one coat on steel or other metal surface with synthetic enamel/ oil bound primer of approved quality including smoothening surfaces by sand papering etc n steel surface . |
| 17 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary |
| 18 | Two coats (with any shade except white). |
| 19 | On Steel surface / hi- gloss |
| 20 | Flling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating same by through saturation with water and ramming complete including cost of sand. |
| 21 | By silver sand . |
| 22 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand . |
| 23 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes |
| 24 | Sub-Total |
| 25 | GST-18% (SGST=9% & CGST=9%)ADD |
| 26 | WEST BENGAL LABOUR WELFARE CESS =1% ADD Please Enable Macros to View BoQ information |
