|
| 1 | Earthwork in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sand stone ) including removing spreading or stacking the spoils within a lead of 75 metre as per direction.The items includes necessary trimming the sides of trenches, levelling , dressing & ramming the bottom , bailing out water as required complete. |
| 2 | Depth of excavation not exceeding 1500 mm |
| 3 | Earth work in filling in foundation trenches or plinth with goode earth , in layers not exceeding 150 mm. Including watering and ramming etc. layer by layer, complete. |
| 4 | With earth obtained from excavation of foundation. |
| 5 | Flling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating same by through saturation with water and ramming complete including cost of sand.By Fine sand . |
| 6 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand . |
| 7 | Supplying and laying Polythene sheet (150 gm/sqm ) over damp proof course or below flooring or in foundation trenches . |
| 8 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes |
| 9 | Brick work with 1st class bricks in cement mortar (1:6) |
| 10 | In foundation and plinth |
| 11 | In superstructure Ground floor |
| 12 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor |
| 13 | 25 mm thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and painting the top surface with a coat of bitumen (VG- 40) using1.7 Kg/ sqm including heating the bitumen and cost & carriage of all materials complete. (bitumen to be supplied by the agency) |
| 14 | Controlled cement concrete with well graded stone chips ((20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS 456 & relevant special publication, submission of job mix formula after preliminirory mix design after testing of concrete cube as per direction of EIC. Consumption of cement will not be less than 300 Kg of cement with with super plasticiser per cum of controlled concrete but actual consumption will be determined on the basis of preliminary test & job mix formula . |
| 15 | In Ground Floor & foundation with Concrete mixture [ M20 Grade] |
| 16 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with rewuired bracing for concrete slabs, beams, columns, lintels, curved or straight including fitting , fixing and stricking out after completion of works. |
| 17 | 25 mm to 30 mm wooden shuttering / Upto Ground floor roof level |
| 18 | 25 mm to 30 mm shuttering without staging in foundation etc. |
| 19 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, strips binders etc. including supplying of roads, initial straightening and removal of loose rust (if necessary) cutting to requisite length hooking and bending etc. complete as per drawing and direction. |
| 20 | For M.S. / Tor steel.[Other than SAIL /TATA/ RINL] Upto Ground floor roof level. |
| 21 | Plaster (to wall, floor, etc.) with sand and cement mortar including rounding off or chamfering corners, as directed and racking out joints roughening of concrete surface including chipping and application of cement slurry where necessary etc. complete. |
| 22 | 15 mm thick plaster with 6:1 cement mortar.in Ground Floor |
| 23 | 20 mm thick plaster with 6:1 cement mortar.in Ground Floor |
| 24 | 10 mm thick plaster with 4 : 1 in ground floor. |
| 25 | Neat cement punning about 1.5 mm thick in wall , dado, window sills, floor, drain etc. |
| 26 | Artificial stone in floor , dado, staircase etc.with cement concrete (4:2:1) laid in panels as directed, with topping made with ordinary or white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding off corners including application of cement sullry before flooring works, using cement @ 1.75 kg/sqm all complete including all materials and labour.(In G Floor/ With graded stone chips :3 mm thick topping (High polishing grinding on this item is not permitted) with ordinary cement. 35 mm thick artificial stone in G.F. roof |
| 27 | Supplying fitting and fixing windows and ventilators with or without integrated grills conforming to I.S. 1038 -1975 and manufactured from rolled steel sections conforming to I.S. to 7452 - 1974 with non friction projection, straightnening if required, fixing lugs in cement concrete (4:2:1) with stone chips 19 mm down , cutting holes and mending good damages to match wuth existing surface complete in all respect excluding glazing. |
| 28 | Opeanable steel windows as per I.S. sizes with side hung shutters and horizontal glazing bars , with or without fixed type ventilators |
| 29 | Two point nose steel hande including fitting and fixing. |
| 30 | Steel peg stay 300 mm long including fitting and fixing. |
| 31 | M.S inegrated griil as per approved design integrated with steel window or ventilator, joints continuosly welded with M.S. flats and bars. |
| 32 | Supplying best Indian sheet glass pans set in putty and fitted and fixed with nails and putty complete in all floors.4.0 mm thick. |
| 33 | Priming one coat on steel or other metal surface with synthetic enamel/ oil bound primer of approved quality including smoothening surfaces by sand papering etc. On steel surface |
| 34 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. On Steel surface / hi- gloss/ Two coats (with any shade except white). |
| 35 | Supplying fitting and fixing UPVC pipes A type and fitting conforming to Is: 13592-1992 with all necessary clamps nails, including making holes in walls, floors etc. cutting trenches in any soil thorugh masonry concrete structure etc. .f necessary and mending good damages including jointing with jointing materials(Spun yarn,valamoid / bitumen / M.seal etc.) complete.110 mm diameter. |
| 36 | Supplying ,fitting and fixing UPVC fittings conforming to IS 13592-1992. |
| 37 | Plain tee110 mm |
| 38 | Bend 110 mm dia |
| 39 | Rendering the surface of walls and ceiling with white cement based water proof wall putty of approved make and brand(1.5mm thick) |
| 40 | Acrylic distemper to interior wall , celling with a coat of solvent based interior grade acrylic primer as per manufactures specification including cleaning and smoothing of surface. |
| 41 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. One Coat / Ground floor |
| 42 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as equired. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Normal Acrylic Emulsion.Two Coat in Ground Floor |
| 43 | M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge. |
| 44 | Supplying 1.5 mm thick M.S. Sheet fitted and fix at one or Both faces of M.S. / W.I Gate etc. with point weldeing not more than 150 mm apart complete inall respect as per design including cost of all labour & materials. |
| 45 | Supplying fitting and fixing door frame with M.S. angle as per drawing and direction of required section. The holes for counter sunk machine screw and nut will be such as to fit 8 to 10 mm iron screw. The counter sunk nut to be welded . The nuts are to be welded after carefull checking with screw. All welding spot should be properly filled or rounded smoot including cost of welding hinges for hinge cleates , lugs for hasp bolt , socket bolt etc. and necessary M.S. clampof 25 mm x 6 mm flat 225 mm long as per direction welded to the frame fitted and fixed in position excluding cost of concrete.M .S. angle frame: 65 x 65 x 6 mm mm @5.8 Kg/m |
| 46 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn)coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). In Roof with 0.5 mm thick sheet. |
| 47 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm verticle channels 100mm apart in fully stretched position 20mm x 5mm M.S. flat as collapsible bracing properly rivetted and washered including 38mm steel roller including locking arrangement, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in wall, floors etc. and making good damages complete. |
| 48 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge . |
| 49 | Supply of UPVC fittings conforming to IS-13592-1992 |
| 50 | Door Tee / 110 mm diameter. |
| 51 | Door Bend (T.S.) /110 mm diameter. |
| 52 | Rubber ring /110 mm diameter. |
| 53 | pipe clip /110 mm diameter. |
| 54 | Rubber lubricant 500 ml |
| 55 | Solvent cement 250 ml |
| 56 | Supplying fitting and fixing plaque made of Granite slabs ( single piece) of 15 mm to 18 mm thick with uniform texture and without decorative veins in facia etc fixing with using Cement slurry at back side of granite @4.4 kg/sq.m and white cement slurry for joint filling @1.8 kg/sq.m.including making lettering , sign marks etc as per direction in the granite slabs with fixed at brick wall (in 1:6) as directed including earth cutting , 75 mm thick sand filling , 75 mm thick Cement concrete (1:2:4) and plastering with 20 mm thick sand cement mortar (6:1) as specifed by the Department including wall putty , Acrylic primer & Super Protective 100% Acrylic Emulsion two coats including all incedential charges for labours , materials , machinaries & transportig charges complete in all respect as per direction of EIC. |
| 57 | Sub-Total |
| 58 | GST-18% (SGST=9% & CGST=9%)ADD |
| 59 | WEST BENGAL LABOUR WELFARE CESS =1% ADD Please Enable Macros to View BoQ information |
