|
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated materials up to a distance of 50 m beyond the building area and stacking and spreading as directed, dewatering by machine/ manually or mechanically, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting as necessary complete. By Mechanical means |
| 2 | Providing and laying in situ, cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, plywood / steel formwork, compacting, finishing uneven and honeycombed surface curing etc. complete. with fully automatic micro processor based Plc with Scada enabled reversible drum type mixer/ concrete Batch mix plant ( Pan mixer etc complete .With fine aggregate ( Crushed SandVSI Grade). Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. |
| 3 | Providing and laying in situ cement concrete of M20 grade of trap/ granite/ quartzite/ gneiss metal for R.C.C. work in foundations like raft, grillages, strip foundations and footings of R.C.C.columns and steel stanchions including bailing out water, plywood/ steel formwork, compaction, curing and roughening the surface if special finish is to be provided, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minium thickness to give smooth and even surface etc. complete. (Excluding reinforcement and structural steel, including cover block) The Cement Mortar 1:3 plaster is considered for renderening uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. |
| 4 | Providing and laying in situ cement concrete of M20 grade of trap/ granite/ quartzite/ gneiss metal for R.C.C. columns for all heights as per detailed design and drawings or as directed, including steel centering, plywood/ steel formwork, compaction, curing and roughening the surface if special finish is to be provided, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minium thickness to give smooth and even surface etc. complete. (Excluding reinforcement and structural steel, including cover block) The Cement Mortar 1:3 plaster is considered for renderening uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. |
| 5 | Filling in plinth and floors with contractors approved hard murum and boulders in 15cm. to 20cm. layers including watering and compaction complete. |
| 6 | Providing & filling in the foundation with sand of approved quality including spreading watering compaction complete. |
| 7 | Providing soling using 80mm size granite/ quartzite/ gniess/ trap metal in15cm. Layer including hand packing filling voids with sand\ grit, ramming, watering complete. |
| 8 | Providing and laying in situ cement concrete of M20 grade of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels for all heights as per detailed design and drawings or as directed, including steel centering, plywood/ steel formwork, compaction, curing and roughening the surface if special finish is to be provided, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minium thickness to give smooth and even surface etc. complete. (Excluding reinforcement and structural steel, including cover block) The Cement Mortar 1:3 plaster is considered for renderening uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. |
| 9 | Providing and fixing in position TMT Fe 500 grade steel from Other Plant bars reinforcement of various diameters for all heights R.C.C. pile caps, footings, foundations, slabs, beams and columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches etc. as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completed. |
| 10 | Providing Fly ash lime Brick masonry ( Bricks conforming to I.S.12894 :1990 and of size 19 cm x 9 cm x 9 cm) in cement mortar 1:6 in foundation and plinth including striking joints, racking out joints watering and scaffolding complete. |
| 11 | Providing Fly ash lime Brick masonry ( Bricks conforming to I.S.12894 :1990 and of size 19 cm x 9 cm x 9 cm) in cement mortar 1:6 in super structure including striking joints, racking out joints watering and scaffolding complete. |
| 12 | Providing and Laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring using Hardner with groove cutting of4mm wide and 20 mm deep with necessary refilling with bitumen etc complete |
| 13 | Providing internal cement plaster 12 mm thick in a single coat in cement mortar 1:5 with neeru finish to concrete or brick surface in all positions including scaffolding and curing complete. |
| 14 | Providing sand faced plaster externally in cement mortar using approved screened sand in all positions including base coat of 15 mm. thick in C.M.1:4 using water proofing compound at 1 kg per cement bag, curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand face treatment 6 to 8 mm thick in C.M. 1:4 finishing the surface by taking out grains, making grooves and curing for fourteen days scaffolding etc. complete |
| 15 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees, Iron Sheet ,etc as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting , fixing in position making riveted /bolted / welded connections without connecting plates , braces and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc, complete |
| 16 | Providing and Fixing Colour coated Zincalume ( R) AZ 150 ( min 150 gms/sq.mt total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 min Base Metal Thickness ( BMT) ( 0.5 min TCT ) , Hi strenght steel with min 550 MPa yield strength, metallic hot dip coated with Aluminium- Zinc alloy ( 55% aluminium43.4 % zinc 1.6 % Silicon with Colourbond ( R) steel quality super durable polyster paint coat ( with inorganic pigment ) The paint shall have a total coating thickness of nominal 35 um , comparising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface . Profile sheet shall have nom 950 - 1050 mm efeective cover width and nominal 180 - 250 mm center to center . The end rib shall be designed for anti- capillary groove and return leg . the feed material should have coil manufacturers product details marked a regular. interval including fasterners with min fabricated with min 25 um Zinc -tin alloy coated , Hex head , Self-drilling screw etc complete ( weight of profile4.52 kg /sqm) |
| 17 | Providing and Fixing Colour coated Zincalume ( R) AZ 150 ( min 150 gms/sq.mt total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 min Base Metal Thickness ( BMT) ( 0.5 min TCT ) , Hi strenght steel with min 550 MPa yield strength, metallic hot dip coated with Aluminium- Zinc alloy ( 55% aluminium43.4 % zinc 1.6 % Silicon with Colourbond ( R) steel quality super durable polyster paint coat ( with inorganic pigment ) The paint shall have a total coating thickness of nominal 35 um , comparising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface . Profile sheet shall have nom 950 - 1050 mm efeective cover width and nominal 180 - 250 mm center to center . The end rib shall be designed for anti- capillary groove and return leg . the feed material should have coil manufacturers product details marked a regular. interval including fasterners with min fabricated with min 25 um Zinc -tin alloy coated , Hex head , Self-drilling screw etc complete ( weight of profile4.52 kg /sqm) |
| 18 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements,M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar,suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With Mechanical gears) |
| 19 | Providing and fixing in position Mild steel fixed staggered ( Z type) Ventilator as per detailed drawing with Hot deep Zink coating including Fabricating with Mild steel Z section odf size 20mm x 25mm and 3 mm thick at weight 1.42 kilogram/ one running metre with stainless steel mosquito net of 304 Grade, 4 mm thick float glass as directed by Engineer in charge including necessary welding, grinding , two coats of Oilpaint etc Complete. |
| 20 | Providing and applying wall care putty on plaster surface and ceiling and walls to prepare surface even and smooth of approved make etc complete. |
| 21 | Providing and applying priming coat oil based primer inside on concrete/ masonry/ Asbestos Cement/ plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required. |
| 22 | Providing and applying Plastic Emulsion paint of approved Quality in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing & brooming down complete |
| 23 | Providing and applying two coats of Exterior Acraylic Emulsion paint conforming to corresponding I.S of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days complete. |
| 24 | Quality Control Tests |
| 25 | 1) Fine aggregates (Sand) Finess Modulus (Sieve analysis) silt & Clay content |
| 26 | 2) Cement - standard consistency ,fineness,specific gravity,setting time(initial & final), compressive strength,soundness |
| 27 | 3) C.C Cubes testing Compressive strength of C.C Cube( Set of 3 Cubes) |
| 28 | 4) Bricks- Water absorption( Set of 5 Bricks) Efflorescene (Set of 5Bricks) |
| 29 | 5) Water PH Value, Sulphate & chloride Content |
| 30 | 6) Paint Glass bead contents & grading analysis |
| 31 | Reflectance & Yellowness index. |
| 32 | Royalty Charges |
| 33 | Murrum |
| 34 | 80 mm Please Enable Macros to View BoQ information |
