|
| 1 | vayanashala rennovation |
| 2 | OD463935/2025-2026:Supplying and fixing pressed steel Door of standard pattern with frame as per profile of IS 4351of section 105x60mm using 18G (1.2mm thick CRCA )sheet and shutters made of section75x30cm for outer styles and horizontal members with locking handles 1 No.for each leaf andwith necessary hold fast for fixing to wall |
| 3 | OD463936/2025-2026:Supplying and fixing pressed steel windows of standard pattern with frame as per profile of IS4351 of section 105x60mm using 18G (1.2mm thick CRCA )sheet and shutters made of section75x30cm for outer styles and horizontal members with locking handles 1 No.for each leaf andwith necessary hold fast for fixing to wall |
| 4 | 13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work |
| 5 | 13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work |
| 6 | 11.20.4:Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Ordinary cement without any pigment |
| 7 | OD482655/2025-2026:Providing and laying 60mm thick factory made cement concrete inter locking paverblock of M30 grade made by block making machine with strong vibratorycompaction of approved sizedesign and shape laid in required colour and pattern overand including 50mm thick compacted bed of coarse aggregate filling the joints withfine sand etc. all complete as per the direction of engineer-in-charge. |
| 8 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 9 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 10 | OD483111/2025-2026:Providing and fixing precoated galvanised iron profile sheets(size, shapeand pitch of corrugaation as approved by engineer in charge)0.35mm(+0.05%) total coated thickness with zinc coating 120 gms per sqm as per IS 277,in 240mpa steel grade, 5-7 micronsepoxy primer on both sides of the sheet and polyster top coat15-18 microns, sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as directed by engineer in charge. The sheet shall be fixed using self drilling/self tapping screws of size(5.5x55 mm) with EPDM seal complete upto any pitch in horizontal vertical or curved surfaces excluding the cost of pulins, rafters and trusses and including cutting to size,and shape wherever requird. |
| 11 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
| 12 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 13 | 21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm) |
| 14 | 10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 15 | OD494722/2025-2026:Plantation of palm Trees, at site i/c watering and removal of unsaverieable material?s as perdirection of officer in charge (excluding cast of plant & water )Cost of plantation per treesplants |
| 16 | OD495129/2025-2026:Providing and fixing pearl grass with earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools and than rolling the surface with light roller make the surface smoothen and light, providing biopesticide, chemical insecticide and anti termite treatment, watering with sprinkler and maintenance for 30 days or more till the grass establish properly as per the direction of officer in charge Please Enable Macros to View BoQ information |
