Construction Of Residential School Based On Netrahat Awasiya Vidyalaya, /Indira Gandhi Balika Awasiya Vidyalaya, At Nawadih Block Bokaro District Of North Chotanagpur Division Of Jharkhand., Bokaro-Jharkhand

TDR : 54557674

Tender Notice
BOQ

24 Days Left

Bokaro , Jharkhand

Tender Brief : Construction Of Residential School Based On Netrahat Awasiya Vidyalaya, /Indira Gandhi Balika Awasiya Vidyalaya, At Nawadih Block Bokaro District Of North Chotanagpur Division Of Jharkhand.

Document Fees
₹ 25000 /-

EMD
₹ 11454500.0 /-

Tender Value
₹ 114.54 Crore /-

Submission Date
04-04-2026

Competition Type
Indian

Bidding Type
Works

Need a Business Loan? Apply Now !


1	Construction of Residential School based on Netrahat Awasiya Vidyalaya, /Indira Gandhi Balika Awasiya Vidyalaya, at Nawadih Block Bokaro District of North Chotanagpur Division of Jharkhand.
2	Earthwork excavation for foundation trenches in hard soil abnd disposal of excavted earth as obtained to a distance upto 50M. including all lits, levelling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and and direction of E/I
3	Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50M and lift of 1.5M all complete as per building specification and direction of E/I (Mode of measurement compacted volume)
4	Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50M and lift of 1.5M all complete as per building specification and direction of E/I (Mode of measurement compacted volume)
5	Providing designation 75A brick work in C.M (1:3) in super structure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joints, costs of screening, materials, scaffolding, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E//I
6	Providing 250 mm thick brick jali in cement mortar (1:8) in super structure with designation 75 A brickGround Floor
7	Providing designation 100A brick work With fly ash lime brick (FLAG) Confirming to IS 12894-1990 in C.M (1:6) in Foundation with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joints, costs of screening, materials, scaffolding, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E//I
8	Providing designation 100A brick work With fly ash lime brick (FLAG) Confirming to IS 12894-1990 in C.M (1:6) in super structure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joints, costs of screening, materials, scaffolding, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E//IGround Floor
9	Providing designation 112 mm thick reinforced designation 100A brick work With fly ash lime brick in C.M (1:4) in super structure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joints, costs of screening, materials, scaffolding, raking out joints to 15mm depth curing, taxes and royalty 9but excluding the cost of reinforcement) all complete as per building specification and direction of E//IGround Floor
10	Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 95 sq mm but not exceeding 185 sq mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
11	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., upto floor five level, excluding the cost of centering, shuttering and finishing 1:1.5:3 (1 cement : 2 coarse sand (zone-III) : 3 graded stone aggregate 20mm nominal size)
12	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinthn level 1:4:8 (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40mm nominal size)
13	Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
14	Centering and shuttering including strutting, propping etc. and removal of form foredges of walls and breaks in floors and walls Above 20 cm wideGround Floor
15	Centering and shuttering including strutting, propping etc. and removal of form for weather shade, chajjas, corbels, etc, including edgesGround Floor
16	Centering and shuttering including strutting, propping etc. and removal of form for walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.,Ground Floor
17	Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platformGround Floor
18	Centering and shuttering including strutting, propping etc. and removal of form for Lintles, Beams, Plinth beams, Girders, bressumers and cantileversGound floor
19	Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Peirs, Abutments, Posts and StrutsGround floor
20	Centering and shuttering including strutting, propping etc. and removal of form for StaircasesGround Floor
21	Centering and shuttering including strutting, propping etc. and removal of form for Staircases
22	Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform HEIGHT MORETHAN 3.5M UP TO 8Ground floor Roof Slab
23	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., upto floor five level, excluding the cost of centering, shuttering and finishing 1:1.5:3 (1 cement : 2 coarse sand (zone-III) : 3 graded stone aggregate 20mm nominal size)Ground Floor
24	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., upto floor five level, excluding the cost of centering, shuttering and finishing1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20mm nominal size)Ground Floor
25	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidaed and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smoothGround Floor
26	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinthn level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20mm nominal size)
27	Providing and fixing of expansion joint system related with wall joint (internal/external) location as per drawings and direction of Engineer-In Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063).Wall Joint of 100 mm gap
28	Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminium base members with, self-aligning and self-cantering arrangement support plates asper ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminium base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-cantering arrangement that freely rotates / moves in all directions. The Self cantering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminium extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063).Roof Joint of 100 mm gap
29	Providing Reinforcement ( Round bars confirming to I.S 432) (IS 2062 Gr A) as per approved design and drawing with cutting , bending with annealed wire with cost of wire removal of rustt, placing the rods in position 9including carriage of bars to work site) all complete as per building specifications and direction of E/IGround Floor
30	Supplying fitting and fixing M.S grill made of 20x6cmm M.S flat/square bar as per approved design and drawing, properly frabricated with joints continous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I 9Where materials is not supplied by the deptt)Ground Floor
31	Supplying fitting and fixing collapsable gate of approved size and make properly fabricated with verticle double channels 20x10x2mm, at 100mm. Centers and braced with m s flat diagonles 20x3mm, with top and bottom rails of T. iron 40x40x6mm with 38mm dia steel pulles complet with bolts,nuts,locking arrangments,stoppers,handles,including applying a priming coat of red lead paint, car riage, hoisting and taxes all complet as per building specification and direction W/IGround Floor
32	Structural steel work in single section, fixed with or without connecting plate, including cutting, hosting, fixing in position and applying a priming coat of approved steel primer all complete
33	Providing and laying vitrified paring/industaril tiles in different sizes thickness to be specified by the manufactures with water absoprtin less than 0.08% and confirming to IS 4457:2007, o approved make, in all colours and shades, laid on 20mm thck cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete SIZE of tile 300x300x10 mmGround Floor
34	Providing and laying double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejoints with white cement and matching pigments etc., complete. size of tile 600x600mmGround Floor
35	Providing and liying vitrified cool roof tile in different size (Thickness to be specified by the manufacturer) with water absorption less then 0.08% and confirming to IS: 154557-2007 / 15013006. of Approved make in all colours and shades, laid on 20mm thick cement morter 1:4 (1cement 4 coarse sand), jointing with grey cement slurry @ 3.3kg/Sqm including grouting the joints with white cement and matching pigments etc. its solar reflective index (SRI) value should be above 78. complete. size of Tile 300x300x10mm thick
36	Providing 19mm thick water proof cement plaster (1:3) Ground Floor
37	First Floor
38	Second Floor
39	Third Floor
40	Terrace Floor
41	Providing 25mm thick water proof cement plaster (1:3)
42	Providing articulation joint in walls with cost of 6mm, asbestos sheeting nailed or screwed to column or walls and flushed with platsrer including cost of all labour and materials compete job as per building specification and direction of E/IGround Floor
43	Providing 12mm cement plaster (1:6) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/IGround Floor
44	Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5Ground Floor
45	Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plasterterd surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding Ground Floor
46	Providing two coats of showcwm of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/
47	Providing primer one coat of approved shade and make over new wooden surface including preparing the surface after cleaning removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/IGround Floor
48	Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface Ground Floor
49	Providing two coats of synthetic enamel paint of approved shade and make over steel surface and one coat of primer with red lead paintGround Floor
50	Laying of one numbef PILCA/PVC insulated and PVC sheathed/ XLPE power cable of grade exceeding 1.1KV but not exceeding 11 KV of size. 120 sq inm direct in ground including excavation, and cushioning protective covering and refilling the trench
51	Suplying and making cable route marker with cement concrete 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size) of size 60 cm x 60 cm at the bottom and 50 cm x 50 cm at the top with a thickness of 10 cm including inscription duly engraved as required.
52	Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.Ground Floor
53	Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 6.5 metre and upto 8.0 metre
54	Above 8.0 metre and upto 11.0 metre
55	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.Ground Floor
56	Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 8mm thick Granite of any colour and shadeGround Floor
57	LIGHT FIXTURES AND POLES:S.I.T.C of floowing rating LED Street lighting luminarie with pressure die cast housing and toughened glass cover (JP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50Hz. Luminarie shall be confirm to IS: 10322 part-5/section:3 and shall be complete with all necessary accessories as required. 45/48W LED Street light
58	S.I.T.C of floowing rating LED Street lighting luminarie with pressure die cast housing and toughened glass cover (JP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50Hz. Luminarie shall be confirm to IS: 10322 part-5/section:3 and shall be complete with all necessary accessories as required. 70/72W LED Street light
59	Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to be paid for separately). Ground Floor
60	Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately).Ground Floor
61	Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)Ground Floor
62	Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.First Floor
63	Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
64	Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm)Ground floor
65	Providing and fixing in position aluminium louvered ventilators as per approved drawings using frame of size 92x31.75mm bottom section 1.3mm thick, weight 1.07kg/m; sides and top sections 1.3 mm, thick, weight 0.933 kg/m. providing and fixing 5.5mm thick frosted glass louvers, including cutting to required length, joints mitred subdividing the frame tenonned and rivetted, in the assembled frame, stiffened with end clips for corners, angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be, with necessary steel screws, raul plugs or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar.-do- using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality.at all levellsGround Floor
66	S.I.T.C of floowing rating LED Flood lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe fef supply voltage 100-270V AC, 50Hz. Luminarie shall be confirm to IS: 10322 part-5/ section-5 and shall be complete with all necessary accessories as required. 90/100W LED Flood light
67	S.I.T.C of floowing rating LED Flood lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe fef supply voltage 100-270V AC, 50Hz. Luminarie shall be confirm to IS: 10322 part-5/ section-5 and shall be complete with all necessary accessories as required. 150 / 160W LED Flood light
68	S.I.T.C of floowing rating LED Flood lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe fef supply voltage 100-270V AC, 50Hz. Luminarie shall be confirm to IS: 10322 part-5/ section-5 and shall be complete with all necessary accessories as required. 240W LED Flood light
69	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter35 mm thick including ISI marked Stainless Steel butt hinges with necessary screwsGround Floor
70	S.I.T.C of floowing rating reccess/surface mounted LED round/square shape Down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/section-2 or IEC:62722 with all necessary accessories as required.6/7W LED Round Down light
71	S.I.T.C of floowing rating reccess/surface mounted LED round/square shape Down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/section-2 or IEC:62722 with all necessary accessories as required.36W 2' x 2' LED Panel light
72	15W COB based round LED light with multiple beam angles (36 Degree)
73	S.I.T.C of floowing rating reccess/surface mounted LED round/square shape Down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/section-2 or IEC:62722 with all necessary accessories as required.30W COB based round LED light with multiple beam angles (36 Degree)
74	S.I.T.C of floowing rating reccess/surface mounted LED round/square shape Down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/section-2 or IEC:62722 with all necessary accessories as required.15/16W LED Round Down light
75	S.I.T.C of floowing rating reccess/surface mounted LED round/square shape Down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/section-2 or IEC:62722 with all necessary accessories as required.18/20W LED Round Down light
76	S.I.T.C of floowing rating reccess/surface mounted LED round/square shape Down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/section-2 or IEC:62722 with all necessary accessories as required.6/7W LED Round Down light
77	S.I.T.C of floowing rating reccess/surface mounted LED round/square shape Down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/section-2 or IEC:62722 with all necessary accessories as required.36W 2' x 2' LED Panel light
78	S.I.T.C of floowing rating reccess/surface mounted LED round/square shape Down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/section-2 or IEC:62722 with all necessary accessories as required.15W COB based round LED light with multiple beam angles (36 Degree)
79	S.I.T.C of floowing rating reccess/surface mounted LED round/square shape Down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/section-2 or IEC:62722 with all necessary accessories as required.30W COB based round LED light with multiple beam angles (36 Degree)
80	Supply Installation, testing and commissioning of foilwing size ceiling fan 3 Blades confirming to 15:374:2019 including wiring the down rode of standard length (upto 30cm) with 1.5sq.mm. FR PVC insulated, copper wire suitable for 230V 50Hz, single phase supply etc. complete as required.1200mm (48\\") BLDC 5star rating 32W Ceiling Fan
81	S.I.T.C of floowing rating surface mounted LED tube light fitting suitable for 230V 50Hz, single phase supply etc. complete as required.10/12W LED Tube light
82	S.I.T.C of floowing rating surface mounted LED tube light fitting suitable for 230V 50Hz, single phase supply etc. complete as required.20/22W LED Tube light
83	S.I.T.C of following rating LED Post top lamp made in die cast aluminium housing with decorative clear/opal acrylic diffuser on existing pipe including connection with 1.5sq.mm. copper conductor etc all complete as required.20/25W LED Post top lamp clear
84	S.I.T.C of following rating approved make LED Bollard fitting with rectangular shape of height 600 to 850mm power input-8/9watt with die cast aluminium housing opel with PC diffuser, IP:65/54 protection, conferming to IS:10322 part 5 etc all complete as required, (excluding plinth charge)
85	Constructing brick masonry circular type manhole 0.91 m internal diaat bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4coarse sand), inside cement plaster 12mm thick with cement mortar1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, all complete as per standard design: 19.9.1.1: With common burnt clay F.P.S (non modular) bricks of class designation 7.5
86	Wiring for group controlled (looped) light point / fan point / exhaust fan point/ call bell point ( without independent switch etc.) with 2Rx1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. Group A
87	Wiring for group controlled (looped) light point / fan point / exhaust fan point/ call bell point ( without independent switch etc.) with 2Rx1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. Group B
88	Wiring for group controlled (looped) light point / fan point / exhaust fan point/ call bell point ( without independent switch etc.) with 2Rx1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. Group C
89	Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineerin-charge.
90	Providing and laying non-pressure NP2 class ( light duty) R.C.C pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete:300mm dia R.C.C. pipe ( Road crossing )
91	INTERNAL WATER SUPPLY SYSTEMProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.18.7.2 20mm nominal outer dia pipes 20mm nominal outer dia pipes
92	25mm nominal outer dia pipes
93	32mm nominal outer dia pipes
94	INTERNAL WATER SUPPLY SYSTEMProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20mm nominal outer dia pipes
95	Providing and fixing CP Brass Single lever telephonic wall mixer of quality&make asapproved by Engineerin charge. (For bath)
96	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
97	Providing and fixing toilet paper holder :17.34.1 C.P brass
98	Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and color. Weighing not less than 105 gms.
99	Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brasss crews with concealed fittings arrangement of approved quality and colour.450mm long towe rail with total length of 495mm,78mm wide and effective height of 88mm,weighing not less than 170 gms
100	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :18.17.5 65 mm nominal bore
101	Providing and fixing uplasticised PVC connection pipe with brass unions :15 mm nominal bore
102	Providing and fixing C.P.brass shower rose with 15or 20mm inlet
103	Constructing masonry Chamber 90 x 90 x 100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design: a)18.34.1: With Common burnt clay F.P.S (non modular) bricks of class designation 7.5
104	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :18.49.1 15 mm nominal bore
105	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore
106	EXTERNAL WATER SUPPLY SYSTEMProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.18.9.2 20mm nominal outer dia pipes
107	20mm nominal outer dia pipes
108	25mm nominal outer dia pipes
109	32mm nominal outer dia pipes
110	40mm nominal outer dia pipes
111	50mm nominal outer dia pipes
112	65mm nominal outer dia pipes
113	80mm nominal outer dia pipes
114	100mm nominal outer dia pipes
115	1.68 m deep with SFRC Cover and frame (heavy duty HD20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : 19.11.1.2 With Sewer bricks conforming IS : 4885
116	Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS : 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
117	Providing and fixing square-mouth S.W gully trap class SP-1 complete with C.I grating brick masonry chamber with water tight C.I cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design19.4.1.1 With common burnt clay F.P.S (non modular) bricks of class designation 7.5
118	Providing and laying non-pressure NP2 class ( light duty) R.C.C pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete: 150 mm dia R.C.C. pipe ( basement below 600mm from FFL ) -19.6.2
119	Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure)
120	Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).
121	Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% for payment).
122	Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
123	Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
124	Providing and displaying of Aglaonema Butterfly having ht.30 cm 10 to 12 fresh, healthy and attractive colorful leaves, well developed in 25 cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge.
125	Providing and Displaying Adenium Obesum grafted well developed with fresh & healthy 30 to 60 cm ht. in 25 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.
126	Providing and stacking of Iresine herbstii, of height 25-30 cm., full of branches well developed in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge
127	Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge.
128	Providing and stacking of Ficus religiosa (Peepal) of height 150-165 cm. in big poly bags of size 30 cm as per direction of the officer-in-charge.
129	Providing and stacking of Passiflora caerulea (Rakhi bel) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
130	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
131	Providing and fixing C.I dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 237318.60.1: 80 mm dia
132	Constructing brick masonry chamber for underground C.I inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I cover with frame (light duty) 455 x 610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggegate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 coarse sand (Zone III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: 19.30.2 Inside dimensions 500x700 mm and 45 cm deep for pipeline with one or two inlets :19.30.2.1 With common burnt clay F.P.S. (non modular)bricks of class designation 7.5
133	5 KVA online UPS Single phase input and Single phase output power system of input, voltage range 110 V AC +/- 5% - 300V AC . Frequency range 40 Hz - 60 Hz +/- 10% output voltage range 200V / 240V AC +/- 1%, Frequency range 50 Hz +/- 1%, Power Factor 0.8/3:1, Harmonic distribution - <2% THD (linear load) ; 5%THD (non-linear load).
134	10 KVA online UPS three phase input and three phase output power system of input, voltage range 360 V /380 V/400V/485 V AC. Frequency range 40 Hz - 60 Hz +/- 10% output voltage range 415 V =/- 1%, Frequency range 50 Hz +/- 1%, Power Factor 0.8/3:1, Harmonic distribution - <2% THD (linear load) ; 5%THD (non-linear load).
135	MS battery rack suitable for 15 to 20 UPS battery installation
136	12V, 65 Ah sealed maintenance free (SMF) battery with 24 months replacement guarantee. IS : 1652:1991
137	7 Mtr. height Octagonal Hot - Dip galvanized pole( BOP - 7030) with top dia 70 mm, bottom dia 130 mm & made of 3 mm thick sheet, base plate dimensions 200 X 200 X 12 mm (L x B x T) including suitable sizes of foundation bolt all complete as reqd. (Without Arm)
138	9 Mtr. height Octagonal Hot - Dip galvanized pole( BOP - 9031) with top dia 70 mm, bottom dia 130 mm & made of 3 mm thick sheet, base plate dimensions 200 X 200 X 16 mm (Lx B x T) including suitable sizes of foundation bolt all complete as reqd. (Without Arm)
139	1 m Double Arm suitbale for 90mm Top
140	Supply of 16mtr. High mast in two section Construction S355 grade as per BS-EN 10 025 Top Dia 150mm, bottom dia 360mm, plate thickness 3mm, 20side polygon, galvanisation as per BS EN ISO 1461, base plate dia 520mm, base plate thickness 25mm, GI single spike lighting protection, maximum wind speed 47 m/s with 6 nos foundation bolts of PCD 445mm TS 600/ 24mm dia/850 mm long. Luminaries carriage : Material for 40 NB ERW Class B - M.S. Pipe, dia of carriage ring 450mm (ID) with 8/12 arm, welded, 2 sections having carrying capacity upto 8/12 luminaries. Trailing Cable : 5 core 2.5sq.mm. PVC flexible copper conductor Winch/Power Tool: Double drum, SWL 350 kg with 1 HP 6 pole single speed integral motor Rope: Grade AISI 304,7/19 construction, dia 5mm, BLC 1450 x 2 having 2 nos of continues rope. Aviation obstruction light; twin dome aviation obstruction lights LED type as required. (But excluding Feeder Pillar)
141	Providing and fixing Gun metal full way of approved quality all complete as per specification and dirction of E/I 20 mm nominal bore
142	25 mm nominal bore
143	32 mm nominal bore
144	40 mm nominal bore
145	50 mm nominal bore
146	Providing and fixing G.M non- retun valve horizontal/vertical type of approved quality as per specification and direction of engineer-in -charge. 32mm dia weight not less than 600gms
147	40mm dia weight not less than 700gms
148	50mm dia weight not less than 1.00Kg
149	Supplying ,fitting and fixing viterious white glazed earthen ware I.W.C of parry hidustan or any other approved I.S.S make with 100mm H.C.I 'p' trap 15 ltrs CI pull and let go flushing cistern of names or other ISS equivalent make ,complete with all fittings , CI, or CC brackets 32mm alkathene / PVC telescopic flush,pipe above 2m long with one brass coupling and clapms GI chins and pull including supplying and fixing a pair of vitreous white glazed earthe ware foot rest to be fixed in floor 15mm CI body brass spindle stop cock of weight not less than 50grms ,15mm PVC connection pipe 450mm.long and the exposed pipe and cistern with 2 coats of approved paint over a coat of RED oxide primer etc .all complete as per specification and direction of E/I( C ) 10.0 lit. low level PVC.cistem
150	WATER SUPPLY AND SANITRY WORKS supplying .fitting and fixing 40mm high vitreous white glazed earthen E.W.C with 'P' trap oa parry hindustan or any orther approved I.S.S make including supplying and fixing 15 liters C.I.mosquito proof low down flushing cistern of approved make with complete fittings with C/I.handle and R.S or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock os approved quality weight not brass coupling at both ands and white /black plasic solid state seal and lead of commander /cuckoo os other I.S.S make with hinges os screws etc painting pipe and cistern stc . with 2 as per specification and direction of E.L( i ) with 'P' trap( a ) 12.5 lit. low level C.I.cistem
151	supplying ,fitting and fixing flat back or anguklar lipped front vitreous white glazed earthedwear urinal of 'hindusthan \\"parry\\"or any other approved I.S.S make with 5 ltrs capacity C.I automatic fulsing cistern of reliance for any othrer I.S.S approved make with all fittings with C.I or RS bracket standerd size GI flush pipe with fitting clamps,15mm C.I body bross spindle stop cock of approved quality wight not less than 400ghrms,15mm pvc /alkthene pipe450 mm long with bross coupling at both ends and doing plumber joints including painting of exposed part with 2 coats of approved paint over same etc.all complete as per specification and direction of E/IFlat back or standing cornner(600/350)
152	supply ,fitiinf and fixing viterous white glazed earthen wear wash hand basin of parry or hindustan or any other ISS approved make supported on CI or RS brackets 32mm CI brass waste 15mm dia CI body brass spinle stopcock of approved quality of weght not less than 350 grms, 32mm pvc waste pipe 75mm long with brass coupling at one end and making polumber joint etc.all complete as per specification and direction of E/I
153	Supplying ,fitting and fixing white glazed fires clay sink of approved make with overflow arrangements supported on CI or RS painted brakets 40mm dia CP brass waste with CP brass chain and rubber plug 40mm dia PVC waste pipe about750mm long with brass coupling at one ended 15mm CI body brass spindle bibcock of approved quality of weight not less than 450grms including cutting wall adn making good the same etc.all complete as per specification and direction of E/Ikitchen sink 600 x 450mmx250mm
154	Supplying materias and labours for construting inspection chamber of designation class 75b bricks size deep ,600 x 450 internal dimensionshaving 250mm wall thicking in cement mortar (1:6) including 12mm cement (1:4) with punning on inside (1:6) with 600 x 475mm G.I.cover with frame (weight not less than 36kg ) along with work in excavation and 80mm thick P.C.C (1:3:6) in foundation and refilling all complete as per specification and direction of E/L
155	earthwork in excavation in foundtion trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obained to a distance upto 50m .including all lifts, levelling ,ramming the foundation trenches,removing roots of trees, shurbs all complete as per approved desingn , builiding specification and direction of E/I
156	Excavation in soil with Dozer with lead upto 1000 metres Excavation for road way in soil by mechanical means including cutting and transporting the earth to site of embankment / dumping area with lead upto 1000 metres, including trimming bottom and side slopes in accordance with requirments of lines, grades and cross sections.
157	Removal of un serviceable soil including excavation, loading and disposal upto 1000metres lead but excluding replacement by suitable soil which shall be paid separately as per clause 305.
158	Construction of Embankment with material obtained from borrow pits.Construction of Embankment with approved material obtained from borroe pits with approved material obtained from Borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirment of table 300-2
159	Construction of Embankment with material obtained from borrow pits.Construction of Embankment with approved material obtained from borroe pits with approved material obtained from Borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirment of table 300-2
160	Construction of un-reinforced , dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarese and fine aggregate conforming to IS 383, Maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread compacted and finished in a continuous operation including provision of contraction expansion construction and longitudinal joints joint filler separation membrane sealant debonding strip dowel bar , tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing.
161	Cast in Situ cement concrete M20 Kerb with channel. (Construction of cement concrete kerb with channel with top and bottom width 115 and 165mm respectively, 250mm high in M20 grade PCC on M15 grade foundation 150mm thick, kerb channel 300mm wide, 50mm thick in PCC M20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409)PCC M15 for kerb base
162	Development of tube well in accordance with IS : 2800 (part I) and IS:11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \\"V\\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. for Two borewell
163	Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Two track four panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto 10.00 sqm).Ground Floor
164	Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).Ground Floor
165	Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.120 mm dia (OD-120 mm & ID-103 mm nominal)
166	Point Wiring in PVC conduit with modular type switch: Wiring for light point /fan point/exhaust fan point /call bell point with 1.5 sq mm FR PVC insulated copper conductor single core in surface /recessed PVC conduit with modular switch, modular plate suitable GI box etc as required Group A
167	Telephone wiring in existing conduit : Supplying and drawing following pair 0.5 sq mm FR PVC insulated copper conductor unarmoured telephone cable in the existing surface /recessed steel / PVC conduit as required2 Pair
168	TV cable in existing conduit : Supplying and drawing co-axial TV cable RG-6 grand 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braird and protected with PVC sheath in the existing surface/recessed steel/PVC conduit as required
169	S/F PVC conduit : Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm
170	25 mm
171	32 mm
172	40 mm
173	S/F modular type switch/socket : Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including modular plate etc as required. 5/6 amps one way switch
174	15/16 amps one way switch
175	5/6 amps 3 pin socket outlet
176	15/16 amps 6 pin socket outlet
177	Telephone socket outlet
178	TV antenna socket outlet
179	S/F modular type electronic fan regulator : Supplying and fixing of stepped type electronic fan requlator on the existing modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.
180	S/F Modular type blanking plate on the existing modular plate & switch box excluding modular switches in recess etc as required.
181	S/F Modular boxes, base & cover plate : Supplying and fixing following size /modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 module (78 mm x 78 mm x 45 mm)
182	3/4 module (78 mm x 140 mm x 50 mm)
183	6 module (78 mm x 205 mm x 50 mm)
184	8/9 module (78 mm x 230 mm x 60 mm)
185	ELECTRICAL - INTERNAL POINT WIRING Point Wiring in PVC conduit with modular type switch: Wiring for light point /fan point/exhaust fan point /call bell point with 1.5 sq mm FR PVC insulated copper conductor single core in surface /recessed PVC conduit with modular switch, modular plate suitable GI box etc as required Group A
186	Group B
187	Group C
188	S/F light plug point with modular type accessories : Supplying and fixing suitable size GI box with modular plac and cover in front on surface of in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting etc as required. (For light plugs to be used in non residential buildings)
189	S/F ceiling rose : Ceiling rose on the existing junction box/wooden block including connection etc as required
190	S/F Batten holder: Supplying and fixing Batten/Angle holder including connection etc as required
191	S/F Dingdong Call bell : Supplying and fixing Dingdong sound call bell single phase 230 volt, complete as required
192	S/F call bell buzzer : Supplying and fixing call bell /buzzer suitable for D.C/A.C single phse 230 volt complete as required.
193	Twin Control point wiring in PVC conduit, with modular type switch: Wiring for twin control point with 1.5 sq mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, 2 way with modular switch, modular plate suitable GI box etc as required. laminated sheet with suit
194	ITC ceiling fan : Installation, testing and commissioning of ceiling fan including wiring the down rods of standard length (upto 30 cm) with a.5 sq mm FR PVC insulated copper conductor, single core cable etc as required.
195	Numbering of fan/ fitting : Numbering of ceiling fan /flurorescent fittings as required.
196	ITC exhaust fan upto 450 mm sweep: Installation of exhaust fan upto0 450 mm sweep in the existing opening including making the hole to suite the size of the above fan, making good the damage, connection, testing, commissioning etc as required.
197	Wiring for group controlled (looped) light point / fan point / exhaust fan point/ call bell point ( without independent switch etc.) with 2Rx1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. Group A
198	Wiring for group controlled (looped) light point / fan point / exhaust fan point/ call bell point ( without independent switch etc.) with 2Rx1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. Group B
199	Wiring for group controlled (looped) light point / fan point / exhaust fan point/ call bell point ( without independent switch etc.) with 2Rx1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. Group C
200	Circuit submain witing in PVC conduit : Wiring for circuit/submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor single core cable in surface /recessed PVC conduit as required 2 x 1.5 sq mm + 1 x 1.5 sq mm earth wire
201	2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire
202	2 x 4.0 sq mm + 1 x 4.0 sq mm earth wire
203	2 x 6 sq mm + 1 x 6 sq mm earth wire
204	4 x 4 sq mm + 2 x 4 sq mm earth wire
205	4 x 6 sq mm + 2 x 6 sq mm earth wire
206	4 x 10 sq mm + 2 x 6 sq mm earth wire
207	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).Ground Floor
208	Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces
209	Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top coveGround Floor
210	Providing and fixing ball bearing for rolling shutters.Ground Floor
211	Extra for providing mechanical device chain and crank operation for operating rolling shutters.Exceeding 10.00 sqm and upto 16.80 sqm in the areaGround Floor
212	Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thickGround Floor
213	Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.Ground Floor
214	40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone.Ground Floor
215	Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
216	Transplantation of trees with in a distance of 2km including excavation around existing tree, pruning of branches, lifting, loading and transportation of existing tree, digging pits for placing tree at new place, adding manure, sand, fertilizer, hormones and bio fertilizer to it. Levelled and neatly dressed and disposal of surplus materials from old existing and new sites to designated place. Each tree should be firmly secured to the stake so as to prevent excessive movement, flooding with water, treatment of roots, rope and gunny bags as per direction of the officer incharge. T&P and all required materials shall be arranged by the contractor and nothing extra shall be paid on this account.(a) Girth of tree shall be measured at a height of 1m above ground level. Girth of trees upto 50cm
217	Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)Ground Floor
218	Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.150 mm dia.
219	Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.90 mm dia (OD-90 mm & ID-76 mm nominal)
220	DEVELOPMENT OF GROUNDClearing and grubbing road land including uprooting rank vegetation, grass, brush, shrubs, saplings and trees of girth upto 300mm, removal of stumps of tree cut earlier and disposal of unserviceable materials, stacking of serviceable material to be used of auctioned, up to a lead of 1000 metres including disposal of top organic soil not exceeding 150mm in thickness
221	Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on lan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge
222	S/F VERTICAL TYPE T.P. MCB DB Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outiets are required.) Note Vertical type MCB TPDB is normally used where three phase outlets are required4 way (8 + 12), Double door, Vertical type
223	Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately).
224	S/F ’B’ series, S.P. MCB ：- Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 KA, \\"B\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required.6/32 amps, single Pole, \\"B” series
225	S/F 'C' Series,MCB :- Supplying and fixing 6 amps to 32 amps rating, 240 volte, 10KA,\\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,esting and commissioning etc. as required. 6/32 amps, Single pole
226	6/32 amps, DP
227	6/32 amps, TPN
228	S/F SP MCB blanking plate :- Supplying and fixing single pdle blanking plate in the existing MCB DB complete etc. as required.
229	S/F SPN RCCB :- Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 16/25 amps
230	S/F TPN RCCB :- Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 16/25 amps
231	S/F TPN RCCB :- Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps
232	S/F 20 amps SPN MCB industrial socket outlet :- Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps \\"C\\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
233	P/F M.V. danger notice plate :- Providing and fixing M.V. danger notice plate of 200 mm X150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Details of cost for one each
234	Supplying and fixing 20 amps, 415 volts,TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 amps \\"C\\" curve, TPN, MCB, in sheet steel enclosure, on surface or in recess with chained metal cover for the socket out let and complete with connections, testing and coriunissioning etc. as required.
235	Horticulture and Landscaping worksFelling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 30 cm girth upto and including 60 cm girth
236	Treatment of soil under existing/proposed floors using chemical emul sion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: 2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
237	Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 60 cm girth upto and including 120 cm girth
238	Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of the building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes ad conduits, with chloropyriphos emulsifiable concentrates of 20% concentration, including cost of chemical, diluting in water to one percent concentration, labour, HOM of equipments, complete as per specifications. (Plinth area of the building at ground floor only shall be measured)
239	Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in charge.
240	Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 3m, as directed by Engineer-in charge.
241	DISTRIBUTION BOARD Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)
242	S/F T.P. MCB DB Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB / Isolator)
243	S/F T.P. MCB DB Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB / Isolator) 6 way (4 + 18), Double door, Horizontal type
244	Borewell WorksSupplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per directionof Engineer-in-charge.200 mm nominal size dia having minimum wall thickness 5.40 mm for Two borewell
245	Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete150 mm clamp
246	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Frame size 65 x 100 mmGround Floor
247	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)35 mm thickGround Floor
248	Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
249	Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, I washer excavation and re-filling etc. as required.
250	Providing and fixing 25mm x 5mm copper strip on surface or in recess for connection etc. as required.
251	Providing and fixing 25mm x 5mm G.I. strip on surface or in recess for connection etc. as required.
252	Providing and fixing earth bush of 50mm x 5mm copper strip on surface for connections etc. as required.
253	Earthing with G.I. earth plate 600mm x 600mm x 6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required.
254	Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonry enclosure with cover plate having ocking arrangement and watering pipe etc. (with charcoal or coke and salt)' as required.
255	Granular Sub Base with graded material (table - 400-1) Construction of granular sub - base by providing close graded material , mixing in a mechanical mix plant at OMC, Carriage of mixed material to work site , spreading in uniform layers with morter grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401.
256	Fixing lightning conductor tapb in Vertical run：-Fixing of copper/G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete as required.( for vertical run).
257	P/F Testing joint for G.I. lightning conductor：- Providing and fixing testing joint made of 20mm x 3mm thick G.I. strip. 125mm long. With 4 nos. of G.I. bolts. Nuts chuck nuts and spring washers etc. complete as required.
258	P/F G.I. Earth tape for lightning conductor：- Providing and laying G.I. Tape 32 mm x 6 mm from earth electrode directly in ground as required.
259	Laying copper /G.I. Tape 32 mm x 6 mm from earth electrode directly in ground as required.
260	P/F G.I. lightning condutor finial ：- Providing and fixing of lighting conductor finial,made of 25mm dia 300mm long,G.I. tube, having single prong at top, with 85mm dia 6mm tlick G.I. base plate including holes etc. complete as required.
261	Fixing lighning conductor finial ：- Fixing of lightning conductor finial (single prong) with base plate including holes etc. complete as required.
262	Reverting, sweating and soldering lightning conductor tape ：- Reverting,sweating and soldering of copper / G.I. tape (with another copper / G.I. tape,base of the finial or any other metallic object ) as required.
263	P/F G.I. lightning conductor tape in horizontal run ：-Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete as required (for Horizontal run).
264	P/F G.I. lightning conductor tape in vertical run ：- Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete as required.( for Vertical run).
265	Fixing lightning conductor tape in horizontal run ：- Fixing of copper/G.I, tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete as required. (for horizontal mn).
266	Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size not exceeding 35 sq mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
267	Waterproofing of RCC Terrace / podium slab / toilet / utilities / water retaining structure by preparing the surface by chipping and cleaning and Grouting of Honey comb, voids, cracks / construction joints with cement slurry ( 1kg cement added in 10 ltr of water ) added with 100gm of inorganic accelerator, followed by spraying of liquid biological modified alkaline earth silicates @ 0.40 ltr per sqm on whole surface to reduce the micro porosity and allowing it to dry, curing the surface for the silicates to penetrate deeper into the concrete and spraying waterpoofing impregnate liquid containing silane and silanol linear copolymer @ 0.50 ltr per sqm and finally applying polymner slurry made out of cross linked acrylic / styrene / butadiene & cement in the ration of 1:0.1, @ 0.50 kg/sqm on the whole surface, including all labour charges tools and equipments, all complete as per specification.at all levells
268	Covering of treated surface with PCC:- Providing 50mm thick cement concrete M20(1:1.5:3) maintaining slope in alternate 2 mt x 2 mt panels with approved quality of stone chips of 20 mm to 6 mm size graded and cleaned sand of F.M 2.5 to 3 including screening, shuttering and mixing cement concrete in mixture with admixture of integrel water rpoofing and placing in position, striking curing, taxes and royalty all complete as per building specification and directions of E/I. panes that has left should be casted next day. There should be 6 mm gap between Panes. Brand-Sika-Plastocrate plus, MYK proof WP 10, Fosroc-Conplast X 4211 C, Dr fixit Pidiproof LW+or Euivalant
269	Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)
270	Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1KV grade of following size on wall surface as required. Above 95 sq. mm to185 sq mm (clamped with 20mmx3mm GI Tape)
271	NON - SCHEDULE ITEMS Providing and laying cinder concrete in cement 1:15 (1 cement : 15 cinder of 12.5mm nominal guage) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing, complete as per specifications. At all levels
272	Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.1.5 / 2.5 / 4 sq. mm
273	Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.6 sq. mm
274	Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.10 sq. mm
275	Providing and placing on terrace, polyethylene water storage tanks As per IS 12701 : 1906 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications(5000x3nos)
276	Supplying PVC flexible conduit pipe….mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm..using NF screws and on either end of the pipe terminated completely. a) 25 mm
277	Supplying, installing & programming of Data Cable
278	Supplying PVC flexible conduit pipe….mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm..using NF screws and on either end of the pipe terminated completely. b) 32 mm
279	Supplying and fixing PVC/metal conduit deep junction box.a) 19/20mm deep junction box
280	Supplying and fixing PVC/metal conduit deep junction box.b) 25mm deep junction box
281	1100V GRADE CABLESSupply, laying, testing & commissioning of PVC insulated armoured, aluminum conductor, 1100V grade power cables.e)2C x 1.5 Sq.mm. Armoured Copper.
282	Below mentioned cables are Soingle core Copper Flexible cables1 C x 6 sq.mm
283	Supplying and fixing PVC/metal conduit deep junction box.c) 32mm deep junction box
284	Supply and fixing of cable tray/steel work in position including clamps, frame work of flats, angle iron, channel with fabrication work including cutting, bending, welding, drilling bolting etc. as per design as required. One coat of primer and 2 coats of enamel paint of approved shade shall be provided.
285	Supplying of 1.1KV LT UG Aluminium cable XLPE insulated, PVC extruded inner sheathed, armourd UG LT cable as per the IS - 1554 (part-1) or IS-7098 part-1, Armoring strip thickness in average + 5% and resistivity 14 Ohms/Kms (Max) as per IS -3975.2 core 10 sq.mm
286	Providing Snake Cable
287	1100V GRADE CABLESSupply, laying, testing & commissioning of PVC insulated armoured, aluminum conductor, 1100V grade power cables.a)3 ½ C x 95 Sq.mm. Aluminium.
288	Below mentioned cables are Soingle core Copper Flexible cables 1 C x 10 sq.mm
289	Vaccum de-watering with vaccum pump and suction mat and compaction with skin floater clubbed with floating disc including cost of generator, HOM of machinery, Screed Vibratory, Power Floater, blade and disc etc., with all lead and lift.Ground Floor
290	1100V GRADE CABLESSupply, laying, testing & commissioning of PVC insulated armoured, aluminum conductor, 1100V grade power cables.c)4 C x 10 Sq.mm. Aluminium.
291	1100V GRADE CABLESSupply, laying, testing & commissioning of PVC insulated armoured, aluminum conductor, 1100V grade power cables.b)4 C x 16 Sq.mm. Aluminium.
292	Supply and making end termination with brass double compression gland including providing and crimping of aluminium solderless lugs / ferrules for XLPE armoured power aluminium conductor cable 1.1 KV grade of following sizes:- 2 core 10 sq.mm
293	Supplying of 1.1KV LT UG Aluminium cable XLPE insulated, PVC extruded inner sheathed, armourd UG LT cable as per the IS - 1554 (part-1) or IS-7098 part-1, Armoring strip thickness in average + 5% and resistivity 14 Ohms/Kms (Max) as per IS -3975.4 core 10 sq.mm
294	a)Earth Strips25 x 3 mm GI strip
295	b)Earth Strips50 x 6 mm GI strip
296	Supply and making end termination with brass double compression gland including providing and crimping of aluminium solderless lugs / ferrules for XLPE armoured power aluminium conductor cable 1.1 KV grade of following sizes:-4 core 10 sq.mm
297	Supplying of 1.1KV LT UG Aluminium cable XLPE insulated, PVC extruded inner sheathed, armourd UG LT cable as per the IS - 1554 (part-1) or IS-7098 part-1, Armoring strip thickness in average + 5% and resistivity 14 Ohms/Kms (Max) as per IS -3975.4 core 16 sq.mm
298	Supplying and fixing Metal fan box with round hook.
299	Supplying, installing, testing & commissioning of supply, installation & testing of Digital signal cable 100 mtrs Krystal
300	GI Structural steel work in single section, fixed with or without connecting plate, including cutting, hosting, fixing in position.
301	Supply and making end termination with brass double compression gland including providing and crimping of aluminium solderless lugs / ferrules for XLPE armoured power aluminium conductor cable 1.1 KV grade of following sizes:-4 core 16 sq.mm
302	Supplying, installing, testing & commissioning of supply, installation & testing of Speaker cable 1000 mtrsKrystal
303	Supply, Laying, testing and commissioning 2X1.5 Sqmm copper PVC sheathed cable (40Strand Speaker cable) run through PVC conduit pipe with fixture like clamps, saddles etc. , Confirming to IS 1554, as per specification and laid in the 20/25mm dia PVC conduit.
304	Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to table 3 class 5 of IS:8130-1984 and virgin grade PVC insulation and power coating extruded PVC sheathed suitable for working voltage upto 1100volts as per IS-694:1990 & confirming to GTP of GROUP A., 3CX6.0 Sqmm.
305	Supply, laying and Excavation of cable trenches of 200x600MM including filling, cushioning and protective covering complete in all respect Excavation, providing sand for laying cable, covering with bricks, refilling & consolidation etc.
306	1100V GRADE CABLESSupply, laying, testing & commissioning of PVC insulated armoured, aluminum conductor, 1100V grade power cables.d)12 C x 1.5 Sq.mm. Copper.
307	Supplying, fixing and testing PVC pressure pipes (6Kg/sqcm) confirming to IS 4985 for waste connection from wash basin, kitchen sinks to floor trap/anti syphonage pipe with solvent cement joints, including allthe fittings, laid concealed/concealed in wall etc, the work shall includewall chase and making good the same in cement mortar and restore the same original condition neatly as directed by the Engineer in-charge.40mm dia
308	Providing of XLR Connector with following specifications; 3 pole female cable connector for 8 mm - 10 mm cable O.D. with Nickel housing and silver contacts Special version of the XLR cable connector XX Series for large cable diameters. Incorporating all features of the XX Series.
309	Supplying of 1.1KV LT UG Aluminium cable XLPE insulated, PVC extruded inner sheathed, armourd UG LT cable as per the IS - 1554 (part-1) or IS-7098 part-1, Armoring strip thickness in average + 5% and resistivity 14 Ohms/Kms (Max) as per IS -3975.3.5 core 50 sq.mm
310	Providing and fixing of PVC Rungs footrest in under ground tanks / manhole using M20 concrete bed blocks for masonry walls or during construction for RCC surfaces, including cost of materials, labour, curing etc., complete as per specifications.
311	CIVIL WORKS RELATED TO ELECTRICAL WORKSSupply, laying and Excavation of cable trenches of 600x800MM including filling, cushioning and protective covering complete in all respect Excavation, providing sand for laying cable, covering with bricks, refilling & consolidation etc.
312	Supplying, fixing and testing PVC pressure pipes (6Kg/sqcm) confirming to IS 4985 for waste connection from wash basin, kitchen sinks to floor trap/anti syphonage pipe with solvent cement joints, including allthe fittings, laid concealed/concealed in wall etc, the work shall includewall chase and making good the same in cement mortar and restore the same original condition neatly as directed by the Engineer in-charge.40mm dia
313	Supplying, fixing and testing PVC pressure pipes (6Kg/sqcm) confirming to IS 4985 for waste connection from wash basin, kitchen sinks to floor trap/anti syphonage pipe with solvent cement joints, including allthe fittings, laid concealed/concealed in wall etc, the work shall includewall chase and making good the same in cement mortar and restore the same original condition neatly as directed by the Engineer in-charge.50mm dia
314	supply, erection, testing & commissioning of Response Indicators with LED indicating lamps, mounting base etc., complete as per the detailed specifications.
315	Providing of 2.5sq.mm 3 core DMX sheilded cable
316	Stage Grid :Providing & Installing of Stage Grid to fixing the stage curtain & Stage setting properties., the stage grid is made out of 50 x 50mm x 16 gauge MS Square tube with the span of 1000mm x 1000 mm the grid is fixed to the existing roof structure as per site condition.
317	Supplying, fixing and testing PVC pressure pipes (6Kg/sqcm) confirming to IS 4985 for waste connection from wash basin, kitchen sinks to floor trap/anti syphonage pipe with solvent cement joints, including allthe fittings, laid concealed/concealed in wall etc, the work shall includewall chase and making good the same in cement mortar and restore the same original condition neatly as directed by the Engineer in-charge.50mm dia
318	Supplying and fixing CP grating of 6mm thick with rim including setting in floor with white cement mortar and making good the floor
319	Supply, laying and Excavation of cable trenches of 300x1200MM including filling, cushioning and protective covering complete in all respect Excavation, providing sand for laying cable, covering with bricks, refilling & consolidation etc.
320	Supply and making end termination with brass double compression gland including providing and crimping of aluminium solderless lugs / ferrules for XLPE armoured power aluminium conductor cable 1.1 KV grade of following sizes:-3.5 core 25 sq.mm
321	Supply and making end termination with brass double compression gland including providing and crimping of aluminium solderless lugs / ferrules for XLPE armoured power aluminium conductor cable 1.1 KV grade of following sizes:-3.5 core 50 sq.mm
322	Raceways of following sizes made of 1.6mm thick pregalvanised sheet steel complete with 2mm thick screwed and openable cover in tray form with gaskets on fixed part, totally enclosed to make it dust and vermin proof complete with 25mm dia. knock outs on either vertical sides of trunking at a distance of 1 mtr. center to center or as directed by engineer - in- charge and all fixing accessories as required. Fully plated bolt, nut, 2 plain washer & a spring washer would be used (minimum 8 Sets per Joint).. The raceways shall be of ready made or fabricated GI type.100 mm (wide) x 38 mm (height)
323	Supplying and fixing CP grating of 6mm thick with rim including setting in floor with white cement mortar and making good the floor
324	Supply & Installation of Ceiling Boxes of following sizes made of 1.6mm thick pregalvanised sheet steel complete with 2mm thick screwed counter sunk type screws / Push to fit type cover. 165 x 165 x 40 MM
325	Supplying, installing, testing & commissioning of supply, installation & testing of XLR male/Female connectorNeutrik
326	Supply and fixing of perforated 2mm thick CRCA sheet steel power coated cable tray of following sizes complete with bend/tee joints, coupling plate & nuts bolts etc. including providing and fixing of M.S. painted hanger etc. as required.150mm wide 50 mm depth
327	Providing and fixing of 2mm thick JEOFLOR TRENDY+ vinyl flooring, 100% recycled flexible homogeneous and monolayer in construction and should be manufactured by calendering & pressing process of size in approved pattern, to ensure a dense, smooth surface and non-directional design, color dyed as a raw mixture to ensure even color throughout the thickness and its surface should be densely compacted for improving wear and ease of maintenance with Anti-bacterial and Fungicidal properties. The flooring shall incorporate a specially formulated PUR+ Surface Treatment avoids staining of chemical products used in healthcare like betadine, eosin or anti-bacterial hand gel and increases the durability of the flooring. It incorporates bacteriostatic and fungistatic actions, tested for Anti-bacterial activity (ISO 22196 → >99% inhibit the growth of bacteria) JEOFLOR EQUVALENT TOVinyl floor covering to confirm the following standards: Make : JEOFLOR TRENDY + Dimension : 2 mm thick; 2 mtr x 20 mtr = 40 Sqm/Roll Total Thickness : 2mm thick ( EN 428) Total weight : 2800 g/m2 ( EN ISO 23997) Surface treatment : PUR+ Iodine Stain Free Impact Sound Reduction : Approx. 4+DB (EN ISO 10140/1) Dimension stability : ≤ 0.40% ( BS EN ISO 23999) Abrasion Group : Group ‘T’ (EN 649) Hygiene treatment very good MRSA with excellent flexibility Reaction to Fire : Bfl-s1 class ( GB 8624-2012) Colour fastness : 6mm (EN ISO 20 105-B02) phthalates free with reference to EN 14372:2004; Slip resistance - R9 (DIN 51130) Measurement of radioactivity - Gamma ray and beta emitting radionuclides ISO 8690:2020 The floor finish should terminate at the room perimeter passing over a concealed PVC Cove Former and continuing up the wall for 100mm. The joints in the flooring should be sealed by using a PVC welding bar of matching colour to be supplied by the manufacturer, using a hot air gun for fusion of welding bar with flooring. A copper strip/mesh should be layer under the Roll, with one earthing point for every 250 sft of area. Th+e flooring should be installed on a smooth, cl+G22:G23ean and dry sub floor which should be free from any undulations. The floor finish should terminate at the room perimeter passing over a concealed cove former and continuing up the wall for 100mm. The joints in the flooring should be sealed by using a PVC welding bar of matching colour to be supplied by the manufacturer, using a hot air gun for fusion of welding bar with flooring. The vinyl sheet shall be laid & fixed with water based adhesive of Level0 and the Surface to be smooth and in level without any bubbles or creases.GROUND FLOOR LEVEL
328	Supplying, installing, testing & commissioning of supply, installation & testing of speakon connectors Neutrik
329	Providing and fixing in positiongund metal wheel valve confirming to IS specifications of approved a make as per directions including all lead and lift etc., complete Make: Zoloto, 25 mm nominal dia
330	SIGNAGESProviding and installing in position the following tupe of sign boards made out of 3mm thick \\"Opaque\\" PVC foam board with computer cut. PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners. Signages with printed \\"IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE\\" of 1.5cm height letters in red with white back ground. The size of the board shall be 25cm * 30cm and shall be fixed at the height of 2mts, from finished floor near Manual Call Points
331	Floor indentification signage (i.e, GROUND FLOOR… ETC.,) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5cm with contrasting colour from back ground. Size shall be 15cm * 60cm. Providing and fixing in position the signages \\"FIRE ORDER\\" it should contain the following matter on 3mm thick \\"Opaque\\" PVC foam board of computerised cut, PVC non-reflective self adhesive vinyle painted foam board of 3' * 4'
332	Supplying of 1.1KV LT UG Aluminium cable XLPE insulated, PVC extruded inner sheathed, armourd UG LT cable as per the IS - 1554 (part-1) or IS-7098 part-1, Armoring strip thickness in average + 5% and resistivity 14 Ohms/Kms (Max) as per IS -3975.3.5 core 95 sq.mm
333	INTERNAL SEWAGE SYSTEM ( Toilet ) Supplying, fixing and testing PVC soil, waste and vent pipes (SWR)/Pressure confirming to IS13592 : 1990, type B with rubber ring/Solvent (confirming toIS5382) joint inclusive of all necessary specials like bends, tees, offsets, door bends, junctions, cowls, etc., laid underfloor/ fixedon walls, and in pipe shafts etc., complete. The rate shall include necessary GI supports, GI grip bolts, angle brackets, hangers, supports as with suitable GI U-clamps, bolts, nuts and washers etc., The clamps shall be painted with two coats of enamel (approved) paint over a coat of primer etc., complete. As per direction of Engineer in Charge75 mm diameter
334	EXTERNAL SEWAGE SYSTEMSupplying, fixing and testing PVC rain water pipes conforming to IS 4985 - 6 kg/sqcm with all fittings like shoes, bends fixed in the pipe shafts (ducts) ,floor, with suitable supports etc., complete. The rate shall include necessary MS supports, MS grip bolts, angle brackets, hangers, supports as with suitable GI U-clamps, bolts, nuts and washers etc., The clamps shall be painted with two coats of enamel (approved) paint over a coat of primer etc., complete. discharged as spout into natural ground.as directed by the Engineer in-charge. 75 mm diameter, 6 kg /cm2
335	Curtain Motor Flat form & Maintenance Catwalk :Providing & Installing Motor fixing Flat form to fix the Vertical Moving Motor, Gear Box with Shaft & fixing accessories are placed to the on the Fabricated Grid .
336	Supplying of 1.1KV LT UG Aluminium cable XLPE insulated, PVC extruded inner sheathed, armourd UG LT cable as per the IS - 1554 (part-1) or IS-7098 part-1, Armoring strip thickness in average + 5% and resistivity 14 Ohms/Kms (Max) as per IS -3975.3.5 core 120 sq.mm
337	INTERNAL SEWAGE SYSTEM ( Toilet ) Supplying, fixing and testing PVC soil, waste and vent pipes (SWR)/Pressure confirming to IS13592 : 1990, type B with rubber ring/Solvent (confirming toIS5382) joint inclusive of all necessary specials like bends, tees, offsets, door bends, junctions, cowls, etc., laid underfloor/ fixedon walls, and in pipe shafts etc., complete. The rate shall include necessary GI supports, GI grip bolts, angle brackets, hangers, supports as with suitable GI U-clamps, bolts, nuts and washers etc., The clamps shall be painted with two coats of enamel (approved) paint over a coat of primer etc., complete. As per direction of Engineer in Charge75 mm diameter
338	Supply and fixing of perforated 2mm thick CRCA sheet steel power coated cable tray of following sizes complete with bend/tee joints, coupling plate & nuts bolts etc. including providing and fixing of M.S. painted hanger etc. as required.300mm wide 50 mm depth
339	Supplying, fixing and testing PVC soil, waste and vent pipes (SWR)/Pressure confirming to IS13592 : 1990, type B with rubber ring/Solvent (confirming toIS5382) joint inclusive of all necessary specials like bends, tees, offsets, door bends, junctions, cowls, etc., laid underfloor/ fixedon walls, and in pipe shafts etc., complete. The rate shall include necessary GI supports, GI grip bolts, angle brackets, hangers, supports as with suitable GI U-clamps, bolts, nuts and washers etc., The clamps shall be painted with two coats of enamel (approved) paint over a coat of primer etc., complete. As per direction of Engineer in Charge110mm diameter
340	Supplying, fixing and testing PVC soil, waste and vent pipes (SWR)/Pressure confirming to IS13592 : 1990, type B with rubber ring/Solvent (confirming toIS5382) joint inclusive of all necessary specials like bends, tees, offsets, door bends, junctions, cowls, etc., laid underfloor/ fixedon walls, and in pipe shafts etc., complete. The rate shall include necessary GI supports, GI grip bolts, angle brackets, hangers, supports as with suitable GI U-clamps, bolts, nuts and washers etc., The clamps shall be painted with two coats of enamel (approved) paint over a coat of primer etc., complete. As per direction of Engineer in Charge110mm diameter
341	Supply, installation, testing and comminisioning of approvaed make heavey quantity of (Class -c) confirming to IS 1239 Pt -such as Tees, elbows , checknuts, Unions, flanges,Nipples etc., Including cutting, Welding, threading fixing on walls, ceiling ( Using 41techpipe / M.S.Angles supports work includes 2 quotes of metal primer and 2 coats of red enamel paint etc., 50mm nominal dia
342	Supplying & fixing CP twin coat hook fixed with SS screws onto the toilet door.
343	Supplying, fixing and testing PVC muilty floor trap with SS frame and cover 75mm dia outlet fixed on a bed of cement concrete with (Heavy duty type) etc., complete.
344	Supply and making end termination with brass double compression gland including providing and crimping of aluminium solderless lugs / ferrules for XLPE armoured power aluminium conductor cable 1.1 KV grade of following sizes:-3.5 core 120 sq.mm
345	Supplying of 1.1KV LT UG Aluminium cable XLPE insulated, PVC extruded inner sheathed, armourd UG LT cable as per the IS - 1554 (part-1) or IS-7098 part-1, Armoring strip thickness in average + 5% and resistivity 14 Ohms/Kms (Max) as per IS -3975. 3.5 core 185 sq.mm
346	Supply, installation testing and comissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports works includes two coats of metal primer and two coats of Red enamel paint etc.-do- 65mm dia
347	Supplying & fixing CP twin coat hook fixed with SS screws onto the toilet door.
348	Supplying, fixing and testing PVC muilty floor trap with SS frame and cover 75mm dia outlet fixed on a bed of cement concrete with (Heavy duty type) etc., complete.
349	Supply, installation, testing and comminisioning of approvaed make heavey quantity of (Class -c) confirming to IS 1239 Pt -such as Tees, elbows , checknuts, Unions, flanges,Nipples etc., Including cutting, Welding, threading fixing on walls, ceiling ( Using 41techpipe / M.S.Angles supports work includes 2 quotes of metal primer and 2 coats of red enamel paint etc., 80mm nominal dia
350	HT Cable - Group A: Supplying and laying of high tension 11KV cable, Dry Curing & Dry cooling with true triple extrusion, simultaneously through a single common head, 3 core under ground XLPE (E) cable having stranded compact circular aluminium conductor, screened insulated, insulation screened with extruded semiconducting compound in combination with copper tape, core laid up extruded inner sheathed of GI flat strip armoured and overall PVC sheathed with specified confirm to IS 7098/11/85 with latest amendments & confirming to the GTP.3Cx95sqmm
351	Supplying and Fixing of approved make C.P.towel ring including C.P. screws with Fischer plugs etc., complete.(Near Wash Basin) Jaquar Model No 1121 or equivalent
352	Supplying, fixing and testing PVC P- trap with brass CP frame and threaded cover for urinals (150mm x 150mm). Trap of 100mm dia. Inlet and 75 mm dia outlet fixed on a bed of cement concrete with (Heavy duty type) etc.,complete. (the frame & grating) as directed by the Engineer in-charge.
353	Supply, erection, testing and commissioning of Conventional type push button type Manual Call Points stations as per the detailed specifications.
354	Supply and Installation of Insulated refrigerant copper tubing of 5/8\\" and 3/8\\" polythene foam insulaiton 3 core 80 strand copper wiring between indoor and outdoor unit. Leak testing oil and gas charging for additional piping length of tube. -- Split
355	Supplying, fixing and testing PVC rain water pipes conforming to IS 4985 - 6 kg/sqcm with all fittings like shoes, bends fixed in the pipe shafts (ducts) ,floor, with suitable supports etc., complete. The rate shall include necessary MS supports, MS grip bolts, angle brackets, hangers, supports as with suitable GI U-clamps, bolts, nuts and washers etc., The clamps shall be painted with two coats of enamel (approved) paint over a coat of primer etc., complete. discharged as spout into natural ground.as directed by the Engineer in-charge. 160 mm diameter, 6 kg /cm2
356	Supply and making end termination with brass double compression gland including providing and crimping of aluminium solderless lugs / ferrules for XLPE armoured power aluminium conductor cable 1.1 KV grade of following sizes:-3.5 core 185 sq.mm
357	Supplying and Fixing of approved make C.P.towel ring including C.P. screws with Fischer plugs etc., complete.(Near Wash Basin) Jaquar Model No 1121 or equivalent
358	Supplying, fixing and testing PVC rain water collection kurra with leaf trap grating made out of UPVC with flange complete as directed by the Engineer in-charge.110 mm diameter
359	FIRE FIGHTING WORKS - Supply, installation, testing and comminisioning of approvaed make heavey quantity of (Class -c) confirming to IS 1239 Pt -such as Tees, elbows , checknuts, Unions, flanges,Nipples etc., Including cutting, Welding, threading fixing on walls, ceiling ( Using 41techpipe / M.S.Angles supports work includes 2 quotes of metal primer and 2 coats of red enamel paint etc., 100mm nominal dia
360	Supply, installation, testing & commissioning of compact celing speaker with back can power handling up to 40 watt RMS 0/100volt @ 1456 ohms single channel. Selectable taping.
361	Supplying and installing pre-cast P.C.C support blocks for supports on the terrace complete. a) 150mmx150mmx150mm
362	Supplying, fixing and testing PVC rain water collection kurra with leaf trap grating made out of UPVC with flange complete as directed by the Engineer in-charge.110 mm diameter
363	Providing and fixing approved make 20 mm dia. With automatic air release valve with unions and requierd C.I gate valve etc. complete.
364	Supplying, fixing and testing PVC rain water pipes conforming to IS 4985 - 6 kg/sqcm with all fittings like shoes, bends fixed in the pipe shafts (ducts) ,floor, with suitable supports etc., complete. The rate shall include necessary MS supports, MS grip bolts, angle brackets, hangers, supports as with suitable GI U-clamps, bolts, nuts and washers etc., The clamps shall be painted with two coats of enamel (approved) paint over a coat of primer etc., complete. discharged as spout into natural ground.as directed by the Engineer in-charge. 160 mm diameter, 6 kg /cm2
365	Supplying, fixing and testing inlet, outlet, vent and over flow pipes, fittings with C.I frame with cover to over head tank complete with PVC rungs, etc complete as shown in the drawing. all puddle flanges to be hot dip galvanized. The payment for this item shall be made involving the following items onlyB) 65 mm dia puddle flanges
366	HT Cable - Group A: Supplying and laying of high tension 11KV cable, Dry Curing & Dry cooling with true triple extrusion, simultaneously through a single common head, 3 core under ground XLPE (E) cable having stranded compact circular aluminium conductor, screened insulated, insulation screened with extruded semiconducting compound in combination with copper tape, core laid up extruded inner sheathed of GI flat strip armoured and overall PVC sheathed with specified confirm to IS 7098/11/85 with latest amendments & confirming to the GTP.3Cx240sqmm
367	Supply, erection, testing and commissioning of Conventional type wall / ceiling mountable Electronic Hooters with strobe light as per detailed specifications.
368	Supply, erection, testing and commissioning of Conventional type optical Smoke/Multi Sensor Detectors with dual chamber, solid state design, detector shall be provided with twin LED indication for operational status, mounting base, etc., as per detailed specifications.
369	Supplying, fixing and testing PVC rain water pipes conforming to IS 4985 - 6 kg/sqcm with all fittings like shoes, bends fixed in the pipe shafts (ducts) ,floor, with suitable supports etc., complete. The rate shall include necessary MS supports, MS grip bolts, angle brackets, hangers, supports as with suitable GI U-clamps, bolts, nuts and washers etc., The clamps shall be painted with two coats of enamel (approved) paint over a coat of primer etc., complete. discharged as spout into natural ground.as directed by the Engineer in-charge. d)200 mm diameter, 6 kg /cm2
370	Supplying, fixing and testing inlet, outlet, vent and over flow pipes, fittings with C.I frame with cover to over head tank complete with PVC rungs, etc complete as shown in the drawing. all puddle flanges to be hot dip galvanized. The payment for this item shall be made involving the following items only C) 80 mm dia puddle flanges-
371	KSRB13-7.1-5: Providing and fixing in position 65 mm dia nominal bore gun metal non-return valve horizontal type of approved make including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No. KBS 13.2.10 / 13.13
372	Providing and laying cinder concrete in cement 1:15 (1 cement : 15 cinder of 12.5mm nominal guage) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing, complete as per specifications. At all levelsFirst Floor
373	Supplying , Installing, Testing and commissioning, of gun metal air release valve size of 25mm dia complete
374	Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System in module size of 600 x 600 x 16mm with Exposed Grid. Tiles having Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ;,83%, Thermal Conductivity k = 0.052-0.057 w/m K, Colour White, Fire Performance UK Class 0 I Class 1 (BS 476 pt- 6 &7)with sand texture finished Dune and suitable for Green Building application with Recycled content of 39%. The tile shall be laid on 24 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm and a load carrying capacity of 15Kgs/sqm&pull out strength of minimum 100 Kgs. The T Sections should have a Galvanizing of 90 grams per Sqm and need to be installed with Suspension system of approved make.
375	Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60899, 5-32Amps TPN MCB
376	KSRB 13-6.3-7: Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 65mm dia nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification no: KBS 13.2.6/13.3.
377	Supplying, Installing in position C P grab bar with pair of fixing screws and fixing material complete.Make : JaquarModel No- AHS-1507
378	Extra for Fabrication supply and Fixing of standard fabricated using slotted angle of size 6mmx50mm for mounting out door/Indoor A.C unit.
379	PProviding and laying heavy duty perforated pavers (grass Crete) 80mm thick using cement and course sand for manufacture of pavers of approved size, shape and colour with a minimum compressive strength of 281 kg per sqm over 50mm thick sand bed (average thickness) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface jonits into its final level, providing and laying suitable grass including required good red earth, etc including cost of materials, labour ,HOM of machineries, all lead, lift and as per directions of Engineer in-charge of the work.
380	Supplying exhaust fan of 1440RPM heavy duty with bracket blades complete for lighting duty suitable to operate on 230V 50Hz, AC supply.. 12\\" sweep (300mm)
381	300x300x150MM MS Powder coated box for fixing earth busbar with supporting isulators, Termination of 25x5MM GI/CU Strip and Cables, with all necessary accessories.
382	LT PANELS Design, manufacture, supplying, fixing in position, testing and commissioning of following LT switchgear panels made up of 14/16G CRCA sheet, suitable for 415 V, 3 phase, 4 wire, 50 Hz power distribution system. The incoming and outgoing feeders shall be accommodated in a modular multitier arrangement and shall be interlocked to avoid paralleling, adequate size cable alley, painting, earthing, numbering, danger plate etc. as required as per specifications and drawings. The panels should be with all items as per SLD.300x300x150MM MS Powder coated box for fixing earth busbar with supporting isulators, Termination of 25x5MM GI/CU Strip and Cables, with all necessary accessories.
383	Supplying, installing, testing and commissioning approved make 15mm CP health faucet with CP flexible tube 1.0m long, CP crutch, nozzle & 2 way Bib Cock with wall flange etc.,complete. The water flow rate is 6 ltrs/Min Jaquar Model No 573 & 041 or equivalent
384	KSRB13-7.1-7: Providing and fixing in position 100 mm nominal bore gun metal non-return valve horizontal type of approved make including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No. KBS 13.2.10 / 13.13 Make: Zoloto
385	Supplying, installing, testing & commissioning Bourden type pressure gauge 0 to 15 kg/sqcm with test cock etc., complete fixed on delivery side of the 100 mm dia
386	ABC Power Type 6 Ltrs capacity Fire Extinguisher fitted with gun metal cap, discharge nozzle, gas cartridge & with wall mounting bracket, confirming to IS:940 bearing ISI Certification mark.
387	Providing and laying platform / ledge wall coping, using prepolished, water cut / gang saw 20mm thick telephonic Black Granite laid on existiing vertical supports and fixing in CM 1:3 propotion. Including cutting to required shape, pattern with paper joints, including full rounding for nosing, finished with cement mortar, pointed with colour pigments to match the colour of slab making through jointing with sealant, making holes 25mm x 12mm grooves in joints including cost of all materilas, mortar, labour, curing etc., complete as per specifications.Ground Floor
388	Supplying, installing, testing and commissioning approved make 15mm CP health faucet with CP flexible tube 1.0m long, CP crutch, nozzle & 2 way Bib Cock with wall flange etc.,complete. The water flow rate is 6 ltrs/Min Jaquar Model No 573 & 041 or equivalent
389	One ABC powder type 6 kg extinguisher each near transformer yard and generator room
390	ABC TYPE 2 kg capacity Fire Extinguisher made out of Manganese steel cylinder, fitted with ISI Marked wheel valve, siphon tube, bend with discharge horn, wall bracket & duly filled with CO2 gas as per IS : 2878 bearing ISI Certification Mark.
391	COARSE BUBBLE DIFFUSERSProviding, fixing & commissioning in position coarse bubble diffusers in equalization tank and sludge holding tank with necessary piping grid and supporting system including connection with the main air supply pipe with ball valves etc., complete.a) Equalization tank
392	b) In Sludge Holding tank
393	FINE BUBBLE DIFFUSERS IN SBR TANKProviding, fixing & commissioning non-buoyant fine pore air bubble diffusers with necessary piping and support grid of 90mm dia, 1m long with EPDM membrane. The support frame retained by two hose clamps fitted to pipe lateral by PVC TEE and spectrum saddle arrangement in each MBBR tank & Treated water reuse tank., complete.a) In SBR TankDiffuser length : m : 1.00Diffuser air transfer rating : cum/hr. 10.00No. of diffusers in each SBR Tank : Nos : 5.83Make: MM Aqua / SC / EQ
394	Supplying, fixing and testing inlet, outlet, vent and over flow pipes, fittings with C.I frame with cover to over head tank complete with PVC rungs, etc complete as shown in the drawing. all puddle flanges to be hot dip galvanized. The payment for this item shall be made involving the following items onlyD) 100 mm dia puddle flanges -
395	Supplying, fixing and testing inlet, outlet, vent and over flow pipes, fittings with C.I frame with cover to U.G.Sump complete with PVC rungs, etc complete as shown in the drawing. all puddle flanges to be hot dip galvanized.The payment for this item shall be made involving the following items only.100 mm dia puddle flanges
396	Supplying & fixing suction `Y'/ pot stainer with MS flange of suitable length fabricated from 16 gauge brass sheet with 3mm slots. 50 mm dia
397	Supply and making of 11KV (E) Extruded \\"X\\" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permitivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT latest amendments.INDOOR TYPE3Cx95 Sqmm
398	Supply and fixing of SECRET FIX STANDING ROOFING SYSTEM IN 0.9mm THICK AA 3004 ALUMINIUM ALLOY. The general roofconstruction shall comprise from bottom to top: (1) First Layer - Supply & Fixing of 0.50mm thick pre-painted galavalume AZ 150 profile sheet of 1000-1050 mm effective cover width and 28-35 mm height ribs at 200-250 mm centre-to-centre and fixed to the purlin by screws (2) Second Layer - Vapour Control Layer shall be a single layer of double-sided aluminium foil having thickness of 200 microns (3) Third Layer - One layer of Rockwool insulation of 100mm thickness each minimum 48 kg/m³ density with thermal conductivity of K=0.038 W/mk at 20 degrees Celsius when tested to ASTM C518. (4) Fourth Layer - Aluminium Halters of alloy AA6082 – of suitable height with thermal barrier pads to be fixed to the sub purlins with SS 304 screws only (5) Fifth Layer - Top layer – Aluminium 65/400 Straight profile sheeting manufactured from aluminium self-supported standing seam roof system from aluminium alloy AA 3004 H44 (AlMn1Mg1) as specified in BS EN 1396: 2007 material thickness of 0.9mm with PVDF2 finish (standard colours) on the exposed surface. The profiled roof panel should have 24nos. of Micro ribs of height 1.5mm in between 3Nos of Mini ribs for extra strength Accessories, Fasteners. The material properties shall be as follows: Ultimate tensile strength: minimum 200 N/mm2, 0.2% Proof Stress: min 185 N/mm2, Modulus of elasticity: 70,000 N/mm2. Sheets are to be laid to meet the requirements of thebuilding geometry and fixed on Aluminium Halters. Halters to be fixed to the purlins with SS 304 screws. The roofing system provider should have Factory Mutual (FM-4471), UL Certification (UL-90)& Thomas Bell Wright International Consultants or equivalent Testing Agency. The Roofing system provider should have tested the roofing system for Air Infiltration, Static Water Penetration, Dynamic Water penetration and Water leakage Field Check .The Test followed will Be ASTM E 283-04,ASTM E330-02 (2010),ASTM E331-00, AAMA 501.1.05,AAMA 501.2-09. The Roofing system provider should have at least three new roll forming machines less than 5 years. New roll former will ensure that roll formed panels shall be of consistent quality and extra roll former will avoid any delay in mobilizing roll former at appropriate time . All installation is to be carried out by approved trained roofing installer. Appropriate accessories for Verge, Eave Ridge shall be used to ensure the weather & water tightness at these point.100MMTHICK
399	FIRE EXTINGUISHER ABC Dry Chemical Powder Fire Extinguisher of 6 kg capacity, fitted with gun metal cap, inner container, wall mounting bracket, discharge hose with open nozzle, complete with initial charge, confirming to IS : 2171 bearing ISI Certification Mark.
400	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :100 mm nominal bore
401	Supplying, erecting, testing and comissioning of voltage stabilizer suitable for 170 to 2701v in put and load variation from no load to full load, with over load protection, spike suppression, operating at 0 degree to 40 degree C. Range etc….complete, 3KVA Capacity
402	Supplying, fixing Trivector Meter, 3 PHASE suitable for LT operation and CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 completely wired.
403	Supplying , Installing, Testing and commissioning, of Hose Cabinet made out of 18guage MS sheet with double glass door with closing arrangement and painted with 2 coats of Fire red enamel paint at outer ISE of the Box and the 2 coats of white enamel paint at inner side of the box is to accomodated 2 Nos of Fire hose box size 20\\" x 24\\" x 10 with complete.
404	Supply, laying and Constructing water tight brick masonry Inspection Chamber with first class bricks in cement mortar 1:6 (1 cement :6 coarse sand), R.C.C. top slab of 150 mm thick with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) with CI chamber cover for following size of trenches with frame.Foundation concrete 150 mm thick 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channel in cement concrete 1:3:6 mix, M.S. foot rests including fixing in 20 x 20 x 10 cm cement conc. blocks neatly finished, complete as per standard design and approved drawings. (Price shall include the cost of excavation, back filling, disposal of surplus earth dewatering and water proofing of manholes as directed at site & other associated civil works).B)600MMx600MM
405	Providing and laying platform using prepolished, water cut/gang saw 40mm thick telephonic Black Granite. laid on existing vertical supports and fixing in CM 1:3 proportion, incluiding cutting to required shape, pattern with paper joints, including full rounding for nosing, finished with cement mortar, pointed with colour pigments to match the colour of slab making through jointing with sealant, making holes 25mm x12mm grooves in joints including curing.Ground Floor
406	Supplying & fixing suction `Y'/ pot stainer with MS flange of suitable length fabricated from 16 gauge brass sheet with 3mm slots. 50 mm dia
407	Supplying and fixing of heavy duty cast iron manhole cover with frame 610X455MM Size (38 kgs) for underground water collection tank.
408	Supply and making of 11KV (E) Extruded \\"X\\" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permitivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT latest amendments.INDOOR TYPE3Cx240 Sqmm
409	Sealed maintenence free battery to provide back up of 26AH* 16 nos (One Hour Back up)
410	Supplying, installing & commissioning of supply & installation of Mic stand small
411	A) ALERT THE SECURITY AT SECURITY ROOM BY ACTUATING MANUAL CALL POINT LOCATED AT STRATEGIC LOCATIONS.B) EVACUATE THE OCCUPANTS BY USING FIRE EXITS AND EMERGENCY EXITS ONLY AND ASSEMBLE AT VARIOUS ASSEMBLY POINTS.C) IF POSSIBLE TRY TO EXTINGUISH THE FIRE BY USING NEAREST / SUITABLE PORTABLE EXTINGUISHER OR WATER FROM NEAREST WET RISER.D) BE CALM AND DO NOT GIVE ANY ROOM FROM PANIC, WALK, DO NOT RUN.E) IF YOU ENCOUNTER SERIOUS DIFFICULTY IN EVACUTION, FLAT AND TRY TO ATTRACT ATTENTION OF RESCUE TEAM.ACTION BY SECURITY / RECEPTION UPON RECEIPT OF INFORMATION THROUGH FIRE ALARM OR FIRE DETECTORS OR BY USING PUBLIC ADDRESS SYSTEM. A) ALERT THE OCCUPANTS BY USING PUBLIC ADDRESS SYSTEM.B) INFORM FIRE CONTROL THROUGH ANY ONE OF THE FOLLOWING PHONE NUMBERS: 101, 22971500, 22971550 AND 22971600.C) REFER EVACUTION PLAN FROM EVACUATING STANDARD PEOPLE.D) GUIDE THE FIRE FORCE, ON THEIR ARRIVAL TO THE SEAT OF FIRE.E) IN CASE OF THE CASUALITIES, CALL AMBULANCE BY DIALLING NUMBER……………. FIRE FIGHTING AGNECY ………………………… PHONE: ………………………………..FAX: ……………………………
412	INTERIOR FURNISHING WORKS - Providing and supplying Acoustical Wall Paneling' with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire reaction Class A, as per ASTM E-84, fabric with option of colors - as per the choice of the Architect/Engineer incharge of the size 600x600mm, 600x1200mm & 600x1800mm providing a minimum sound absorption level of 0.85 NRC to be affixed to wall using Wall panel lmpalersand construction adhesives as per the instructions laid down by the certified manufacturer.
413	Supplying , Installing, Testing and commissioning, of 19mm dia 36.5 mtr length Hose with Rubber lining smooth bore Reinforeced of Natural syenthitic fibers, A rubber cover finish shall be smooth, fluted or fabric marked with minimum thickness of 1.50mm, and withstandard working pressure of 10kgf/sqcm confirms and tested as per IS 444,
414	Supply and making of 11KV (E) Extruded \\"X\\" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permitivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT latest amendments.OUTDOOR TYPE 3Cx240 Sqmm
415	Frill Fixing Pipe
416	Center Frill Fixing Pipe
417	Providing and fixing Double shutter glass door of 12mm thick plain toughened glass of approved make (Saint Gobain, Modi float). The door is fixed by using any approved make hardware fitting like patch fitting, pivot, floor machine, locking arrangements, handles and suitable SS door rails with floral glass etching for 1/3rd portion of door area etc complete. The rate includes cost of all materials, labour, hire of tools & machineries as per the specifications.Ground Floor
418	SPORTS FLOORINGProviding and laying approved sports flooring as per manufacturer's specifications, complete including the cost of all materials, labour, etc as per directions of architect.Make : Tarkett-sports or equivalent.VSF-1 - 6.5mm thickBasic Price - 4150/SqmGround Floor
419	Providing, installing, testing and commissioning of approved make Conductive type level sensor with SS 316 probes MS 2-1/2\\" table E std flange and weather proof cast aluminium enclosure to sense two levels of the under ground sump and the over head water storage tank.
420	Goose neck Microphone with cord length of 6 Mtrs. as per specification.
421	supply, erection, testing & commissioning of wall mounted 4/5.0 Kg, CO2, Fire Extinguishers etc., complete with all necessary accessories to fix the Extinguisher.
422	Supplying & fixing suction `Y'/ pot stainer with MS flange of suitable length fabricated from 16 gauge brass sheet with 3mm slots. 80 mm dia
423	INSPECTION CHAMBERSupply, laying and Constructing water tight brick masonry Inspection Chamber with first class bricks in cement mortar 1:6 (1 cement :6 coarse sand), R.C.C. top slab of 150 mm thick with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) with CI chamber cover for following size of trenches with frame.Foundation concrete 150 mm thick 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channel in cement concrete 1:3:6 mix, M.S. foot rests including fixing in 20 x 20 x 10 cm cement conc. blocks neatly finished, complete as per standard design and approved drawings. (Price shall include the cost of excavation, back filling, disposal of surplus earth dewatering and water proofing of manholes as directed at site & other associated civil works).A)900MMx900MM
424	Supply, installation, testing & commissioning of compact wall mount speakers with power handling up to 40 watt RMS 0/100volt @ 1456 ohms single channel. Selectable taping Specs: Power handling: 15 to 30watts Frequency response; 80Hz to 18Khz spl:
425	Supplying , Installing, Testing and commissioning, of 63mm dia, single headed Gun Metal Hydrant valve with flanged inlet, stop valve, spindle and cast iron and handwheel. It has a female instanteanuous outletwith blank cap and is hydralically test to 21kgf/cm2 pressure having a flow rate of 990 lpm at 7kgf/cm, 2 of pressure with blank capand wheel as per IS 5290 et.c, . Complete. Make : winco/new age
426	Supplying , Installing, Testing and commissioning, of Reinforeced rubber lined RRL fire hose of 63 mm dia, 50mtr length as per IS 8423, bended with one set of male and female instanteanuous gunmetal coupling as per IS 903. Complete. Make : Winco / Newage
427	Providing of Aluminium Par Can with following specifications; Voltage :- AC110-220V, 50-60Hz.Power Consumption :- 52W.Light Source :- 54 High Brightness RGB.Lamp Life :- 6-10 Ten Thousand HRS.Colour :- 16.7 Million Kinds Of Colour Change.Control mode :- DMX512 , Master Slave , Auto , Sound Active.Control channels :- 8CHS.
428	Supplying, installing & commissioning of supply & installation of Mic stand Large GS
429	Providing Unversal stand for Projectror Ceiling mount
430	Construction of brick masonry catch basin chamber chambers of internal clear dimension as mentioned below by using first class table moulded modular bricks 230 mm thick wall in cement mortor joints in 1:4, over CC 1:4:8 bed 150 mm thick including Supplying precast RCC perforated top slab in 1:2:4 Mix (1 cement: 2 coarse coarse sand: 8 graded stone aggregate), with angle iron frame, inside plastering15mm thick with CM 1:3 (1 cement::3 fine sand) finished very smooth with floating coat of neat cement & making benching and channelling in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 gradedstone aggregate) neatly finished complete as per standard design and as per drawing and specifications.Inside size of 450 x 450mm & depth not exceeding 600 x 600mm including Supplying 450 x 450mm RCC cover with MS L angle frame.
431	Structural GlazingProviding and fixing curtain glazing system structural glazing including provisions for openable side / top hung vision glass panels, using profiled aluminium Extrusions of 63.5 mm x 58.00 mm x 2.25mm of 1.73 kgs/mtr for vertical and Horizontal members and 63.5 mm x 38.1 mm x 2.25mm of 1.13 kgs/mtr as outer frame, using 8mm thick plain toughned glass with all necessary accesories like aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including cost of all inputs of designing, labour for fabricating and installation of aluminium grid installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineerin-Charge.-do- using aluminium quality as per grade 6063 T5 or T6 as per BS 1474, including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. At all levelsMake: Eternia / Jindal / Tata / DomalGround Floor
432	Supplying fully automatic Star-Delta Starter unit push button type with suitable wires, 3contactors, one adjustable thermal timer mounted on a common base plate held in steel enclouser for use on 400/440 volts 3 phase and wired after fixing to the existing wooden board for motor.
433	FURNITURECLICK MEDIUM BACK AUDITORIUM CHAIRSupplying & placing in position click type Medium back chair with following specification.FRAME: The Frame is made out of 75x6mm thickness mild steel Flat is Confirming IS – 513:1994. The Frame is welded by Co2 welding process for Uniform finish and high Tensile Strength wire 0.8mm IS:0419-SL frame joints are brazed & neatly Finished.The Frames are powder coated with epoxy polyester Hybrids of hardness HB74 and Impact Resistant (IN LAB) and thickness 40 to 60 microns is carried out of 7 steps pre – treatment process.SEAT STRUCTURE & UPHOLSTRY: Seat of size 480x480mm & Back of size 620x470mm is made by 12mm Moulded Hot Pressed Plywood in Ergonomic Shape. They are Polyurethane Moulded Foam with Density 50 – 55 in same shape as the plywood, Upholstery is done by using High Pressure Pneumatic Spray Glue and Pneumatic Press and by covering with polypropylene seat cover.ARMS: Arms are made of Rubber wood with Melamine Finish to Size: 50x 300x 25.FASTENERS : High Quality Metal Screws confirming to IS:2269 Hardness HRC 38.44 and Tensile Strength 1300 N/mm square.Side Panel/Aisle Panel: The chair rests on the ground on two side panels frames made of 2.5mm thk CR steel. Each Side panel is fitted with two upholstered practical board of 9mm thk. The side panel frame is grouted to the floor using foundation expansion bolts through base.
434	Battery Rack & DC connecting cable
435	Supply, erection testing & commissioning of pot strainer / Y Strainer. Rate shall include for rubber insertion, bolts, nuts GI flanges.100 mm nominal dia
436	Supplying & fixing suction `Y'/ pot stainer with MS flange of suitable length fabricated from 16 gauge brass sheet with 3mm slots. 100 mm dia
437	Supplying, installing, testing and commissioning of Controller for integration with Fire Alarm panel for automatic announcement system in the event of fire.
438	Supplying, installing & programming of Encloser DB
439	Installation & Programming Charges
440	Construction of brick masonry catch basin chamber chambers of internal clear dimension as mentioned below by using first class table moulded modular bricks 230 mm thick wall in cement mortor joints in 1:4, over CC 1:4:8 bed 150 mm thick including Supplying precast RCC perforated top slab in 1:2:4 Mix (1 cement: 2 coarse coarse sand: 8 graded stone aggregate), with angle iron frame, inside plastering15mm thick with CM 1:3 (1 cement::3 fine sand) finished very smooth with floating coat of neat cement & making benching and channelling in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 gradedstone aggregate) neatly finished complete as per standard design and as per drawing and specifications.Inside size of 450 x 450mm & depth not exceeding 600 x 600mm including Supplying 450 x 450mm RCC cover with MS L angle frame.
441	Providing of 54*3W RGB Multicolor Par light with following specifications; Voltage :- AC110-220V, 50-60Hz.Power Consumption :- 52W.Light Source :- 54 High Brightness RGB.Lamp Life :- 6-10 Ten Thousand HRS.Colour :- 16.7 Million Kinds Of Colour Change.Control mode :- DMX512 , Master Slave , Auto , Sound Active.Control channels :- 8CHS.
442	Providing HD Vedio Spliter 3 in 1 out Please Enable Macros to View BoQ information
443	Providing HD Vedio Spliter 3 in 1 out Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Jharkhand Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Residential School Based On Netrahat Awasiya Vidyalaya, /Indira Gandhi Balika Awasiya Vidyalaya, At Nawadih Block Bokaro District Of North Chotanagpur Division Of Jharkhand., Bokaro-Jharkhand

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Residential School Based On Netrahat Awasiya Vidyalaya, /Indira Gandhi Balika Awasiya Vidyalaya, At Nawadih Block Bokaro District Of North Chotanagpur Division Of Jharkhand., Bokaro-Jharkhand

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us