|
| 1 | Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 1000 metres lead of Asbestos cement Sheet |
| 2 | Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 500 metres lead as per directions of Engineer -in-Charge. |
| 3 | Finishing with Epoxy paint (two or more coats) at all locations after preparing the surface by using wirebrush or emery paper prepared and applied as per manufacturer's specifications including one coat of Epoxy priming coat. All works including cost and conveyance of all materials, labour charges, scaffolding etc. complete. On steel work |
| 4 | Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 500 metres lead as per direction of Engineer-in Charge. In cement mortar |
| 5 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc, up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources. Including cost and conveyance of all materials, labour charges ete, complete as required. |
| 6 | 15 mm cement plaster on th side of single of half brick wall x 1:4 (1Cement: 4 Ca lal Sand) Including cost and Conveyance of all materials, labour charges etc, complete as required. |
| 7 | Structural steel work in single section, fixed with or withour connecting plate, including cutting, hoisting, fixing in positionand applying a priming coat coat of approved steel primer ner preparing the surface by using wirebrush or emery paper, including welding and bolted with sp special shaped washers etc. complete. Hot finished welded type tubes.All works including cost and conveyance of all materials,labour charges, scaffolding ete. complete as required, as per direction of engineer in charge (minimum thickness of pipe 2mm) |
| 8 | Chipping cement concrete manually / by mechanical means including disposal of material within 500 metres lead as per direction of Engineer - in-Charge. Nominal concrete 1:4:8 leaner mix |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:2:4 (cement: 2 coarse sand (zone-III)derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources). Including cost and conveyance of all materials, labour charges etc. complete as required. |
| 10 | 9 mm cement plastering of mix: 1:3 (1 cement: 3 fine sand) including cost and conveyance of all materials, labour charges, scaffolding etc. complete as required. |
| 11 | Providing and fixing Galvalume sheets (Supply of Pre painted Alu- Zinc alloy coated steel sheets -55% Aluminium, 43% Zinc, 1.6% Silicons and not less than 0.5mm thick-PPGL, 150 GSM), Sheet should be supplied in single length upto 12 metre or as desired by Engineer in charge. The sheet shall be fixed using self drilling screws with corrosion resistant (SDS of brand Patta) of size 5.5 x 55mm with EPDM seal at top of corrugation complete upto any pitch in horizontal/ vertical or curved surfaces,including providing necessary overlap not less than 250mm at end 1 1/2 corrugation at side excluding the cost of purlins, rafters and trusses and providing ridges including cutting to size and shape wherever required as per direction of engineer in charge, the ridge will be paid separately. The rate inclusive of covering of existing stocks inside godown from falling of dust and covering of roof from raining with tarpauline sheet during the execution of work also the cost and conveyance of material to site and necessary scaffoldings which required.The contractor shall submit the manufacturers test certificates of the roofing sheet before commencing the work and also required to conduct the test on the randomly selected sample from the site by the Engineer-in -Charge to ensure the minimum thickness. |
| 12 | Providing and fixing Polycarbonate sheet (2 mm thick). Sheet should have protective guard film of 25 micrones minimum to avoid scartches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in charge. The sheet shall be fixed using self drilling/self tapping screws with EPDM seal, complete upto any pitch in in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc complete as per direction of Engineer in charge. |
| 13 | Providing and fixing 200 mm (or nearest greater available size) PVC half split square type eave gutter including cost of all necessary fittings (PVC down pipe to be paid separately) including cost and conveyance of all materials and labour charges etc. complete. |
| 14 | Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall |
| 15 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend |
| 16 | Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers. All works including cost and conveyance of all materials, labour charges etc. complete as required. |
| 17 | Providing silicon compound covering to G.I, bolts over roof all works including cost and conveyance of all materials, labour charges, scaffolding etc. complete as required. |
| 18 | Engaging coolie for cleaning and clearing the area as per direction of Engineer in charge Please Enable Macros to View BoQ information |
