Name of Work:- PLAN FUND 2024-25 - MAINTENANCE WORKS AT KOOTHALI VILLAGE OFFICE, KOZHIKODE
Sl. No.
Item Description
1
CIVIL WORKS
2
15.23.1Dismantling tile work in floors and roofs laid in cement mortar including stackingmaterial within 50 metres lead.For thickness of tiles 10 mm to 25 mm
3
11.41.2Providing and laying vitrified floor tiles in different sizes (thickness to be specified bythe manufacturer) with water absorption less than 0.08% and conforming to IS :15622, of approved make, in all colours and shades, laid on 20 mm thick cementmortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cementand matching pigments etc., complete.Size of Tile 600 x 600 mm
4
OD205606/2025-2026Supplying Airport type Chair of 3 seater capacity make
5
10.16.1Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trussesetc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
6
OD205618/2025-2026Providing and fixing precoated galvanised iron profile sheets (size, shape and pitchofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), totalcoatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steelgrade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoidscratchesduring transportation and should be supplied in single length upto 12 metreor as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/selftapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch inhorizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trussesand including cutting tosize and shape wherever required.
7
OD205617/2025-2026Providing and fixing precoated galvanised steel sheet roofing accessories 0.35 mm (+0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%)total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpasteel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600mm)
8
OD218011/2025-2026Providing and fixing Reception counter of size 2.50x0.90 made with marine plywood18mm thick over fixing 3mm thick teakwood veneer, 1mm thick mica lamination oninside and providing one draw ,one cupboard,key board including all other fittings allcost of materials all labour charges etc complete
9
13.61.1Painting with synthetic enamel paint of approved brand and manufacture to give aneven shade:Two or more coats on new work Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
