|
| 1 | Excavation work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (A) All kind of soil. |
| 2 | Ordinary rock |
| 3 | Providing and laying of stone soling/pitching/ dumping including cost of stone horizontal on level by hand packed tightly including all sort of complete. |
| 4 | Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc in layer not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50cm and lead up to 50 m and lift upto 1.5 mtr. |
| 5 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:4:8 (1 cement : 4 coarse sand (zone-III) derived from natural source: 8 graded stone aggregate 20 mm nominal size) (crushed) . |
| 6 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural source: 6 graded stone aggregate 20 mm nominal size) (crushed) . |
| 7 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural source: 4 graded stone aggregate 20 mm nominal size) (crushed) . |
| 8 | Dry random rubble masonry with hard stone in foundation and plinth:With bond stone, quarry stone |
| 9 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3graded stone aggregate 20 mm nominal size) cruched |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate20mm nominal size).crushed |
| 11 | Providing and fixing up to floor five level precast cement concrete solid block including hoisting and setting in position with cement mortar 1:3( 1cement :3 coarse sand) cost of required centering ,shuttering complete 1:3:6 ( 1 Cement :3 coarse sand (zone-III) : 6 graded stone aggregate 20mm nominal size). |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 13 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately).(Second class kail wood) |
| 14 | Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding paneling which will be paid for separately, all completeas per direction of engineer- in charge. (Second class kail wood)(35mm) |
| 15 | Centering and shuttering including shuttering propping etc and removal of form for :Foundations, footings ,bases of columns ,etc for mass concrete walls ( any thicknee) including attached pilasters, buttresses plinth and string coarse.etc |
| 16 | Centering and shuttering including shuttering propping etc and removal of form for Columns, pillars, piers, abutments, posts and struts. |
| 17 | Centering and shuttering including shuttering propping etc and removal of form for Suspended floors, roofs, landings, balconies and assess plate forms. |
| 18 | Centering and shuttering including shuttering propping etc and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 19 | Providing and fixing 5.0mm thick glass panes with first class kail wood beadings of required size with necessary screws and nails in doors, windows, clerestory windows, all complete. |
| 20 | 20mm cement plaster finished with a floating coat of neat cement of mix:1: 4 ( 1 cement : 4 fine sand) |
| 21 | Providing and applying white cement-based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 22 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats. |
| 23 | Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over and under coat of flatting varnish. |
| 24 | Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete 2nd class kail wood with: |
| 25 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.50mmthick with 20mm nominal size stone aggregate. |
| 26 | Providing and laying/Fiixng of 18mm high density plywood for flooring with drilled screw and nuts/nail work including all necessary item complete job. |
| 27 | Providing and fixing 12 mm thick tongued and groved pine wood (soft wood) 4-5 inch in width panelling or wall panelling in wall .including all necessery fixture including cornice with necessery screw priming coat and varnished on exposed surface etc complete brand (Rait -wood panelling ). |
| 28 | Providing and layingVitrified tiles in floor indifferent sizes (thickness tobe specified by themanufacturer) withwater absorption less than 0.08%and conformingtoIS:15622,ofapprovedbrand&manufacturer, inall coloursand shade, laidon20mmthickcementmortar1:4(1cement:4coarsesand)jointing withgreycement [email protected]/sqmincludinggroutingthe jointswithwhite cementandmatchingpigmentsetc.Thetilesmustbecutwiththezerochipping diamondcutteronly . Layingof tileswillbedonewiththenotchtrowel,plier, wedge,clipsofrequiredthickness, levelingsystemandrubbermalletforplacing the tiles gently and easily. Size of Tile 600 x 600 mm |
| 29 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 30 | Providing and fixing white vitreous china Water closet squatting pan (Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary material I/C mablba , all complete as per the direction of Engineer -in- charge . Orissa pattern W.C pan of size 580x440mm. |
| 31 | P/F Stainless steel 304( 18/8) kitchen sink kasper IS:13983 with C.I Brakets and stain less steel plug 40 mm including painting of fittings sand brackets,cutting and making good the walls wherever required. |
| 32 | Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:White vitreous china wash basin size 630x450mm with a pair of 15mm C.P Brass pillar tape JAGUAR/CERA/HINDWARE Make. |
| 33 | P/F of mirrors of superior glass with plastic moulded frame(of approved quality) and of required size and shape. With 6mm thick hard board backing. Rectangular Shape 1500 x 450 mm |
| 34 | Providing hoisting and fixing trusses/purlins/rafters/posts/post plates or like components of 2nd class budloo/fir wood including cost of screws etc complete. |
| 35 | providing and fixing of pre coloured CGI sheet roofing including gable part eaves board, weather board, Ridges hooks, bolts of approved brand including complete job 0.80mm thick with zinc caoating not less then 275 grm /sqm complete , |
| 36 | Dumping stone in horizontal on level in plinth filling excluding cost of stone complete. |
| 37 | Providing ridges or hips of width 60cm overall width plain G. S. sheet fixed with poymer coated J. or L hooks, bolts and nuts 8mm G. I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275gm /m2 specifications as per engineer in charge |
| 38 | Providing and fixing soil waste & vent pipe (A) PVC Pipe 110mm dia (10 feet Unit Length) |
| 39 | PVC Pipe. 75mm dia (10 feet unit Length) |
| 40 | PVC Bend 110mm dia |
| 41 | PVC Bend 75mm dia |
| 42 | PVC Tee 110mm dia |
| 43 | PVC Tee 75mm dia |
| 44 | PVC Collar 110mm dia |
| 45 | PVC Collar 75mm dia |
| 46 | PVC trap 110mm dia |
| 47 | PVC trap 75mm dia |
| 48 | PVC Socket 110mm dia |
| 49 | PVC Socket 75mm dia |
| 50 | PVC door junction 110mm dia |
| 51 | PVC door junction 75mm dia |
| 52 | Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe , 25mm OD(SDR-7.4) |
| 53 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 54 | P/F CP brass toilet paper holder including cost of wodden,PVC,play etc. |
| 55 | Providing and fixing Wall mount Liquid Soap Dispenser of approved brand |
| 56 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm, 78 mmwide and effective height of 88 mm, weighing not less than 170 gms |
| 57 | Providing and fixing accessories of standard and quality make of approved manufacturer including all necessary fixtures required. L-Drops for room doors. |
| 58 | T-Bolts for doors. |
| 59 | T-Bolts for Windows. |
| 60 | Handle for doors |
| 61 | Handles for Windows. |
| 62 | 15mm C.P Brass tap with elbow operation lever. |
| 63 | Providing and fixing of C.P brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore. |
| 64 | Providing and fixing C.P brass angle valve for basinmixer and geyer points of approved quality conforming to IS:8931 15mm nominals bore. |
| 65 | Providing and fixing C.P brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in charge. |
| 66 | 15mm nominals bore of standards back type CP brass close hole basin mixer pillar tap of approved quality and make weighting not less than 1.970kg. |
| 67 | High water pressure S.S geyser connection pipe (2 feet long) of approved brand etc. |
| 68 | 15mm CP Brass ABS Health Faucet jet sprays with house holder of approved quality conforming to IS standards (KOHLER/JAGUAR/CERA/HINDWARE )etc. |
| 69 | Electrification of Whole building by way of modular fitting with power plug wiring including PVC pipe casing wall fitting, Socket 2way pin, 3 way pin, indicator, change over, MCB, Junction Box, , Led Bulb, Switch, Heating point, etc complete job |
| 70 | Wiring for light/fan/call bell points with 1.5 sq.mm FRLS copper conductor cable in surface/recessed PVC conduit, modular switch, modular plate, GI box and earthing (complete point) |
| 71 | Wiring for circuit/submain wiring with 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire (FRLS copper, in surface/recessed steel conduit) |
| 72 | Wiring for circuit/submain wiring with 2 x 4 sq.mm + 1 x 4 sq.mm earth wire (FRLS copper, in surface/recessed steel conduit) |
| 73 | Wiring for circuit/submain wiring with 4 x 10 sq.mm + 2 x 6 sq.mm earth wire (FRLS copper, in surface/recessed steel conduit) |
| 74 | Supplying and fixing 1/2 Module GI box with modular base & cover plate |
| 75 | Supplying and fixing 3 Module GI box with modular base & cover plate |
| 76 | Supplying and fixing 4 Module GI box with modular base & cover plate |
| 77 | Supplying and fixing 6 Module GI box with modular base & cover plate |
| 78 | Supplying and fixing 5/6A modular switch |
| 79 | Supplying and fixing 3-pin 5/6A modular socket |
| 80 | Supplying and fixing 15/16A modular switch |
| 81 | Supplying and fixing 6-pin 15/16A modular socket |
| 82 | Supplying and fixing modular blanking plate |
| 83 | Supplying and fixing medium class PVC conduit 25 mm with accessories (surface/recessed) |
| 84 | Cast Iron (CI) Junction Box 25 mm, 4-way |
| 85 | Supplying & fixing horizontal type TPN MCB distribution board, 4-way (4+12), double door, 415 V (without MCB/RCCB) |
| 86 | Supplying & fixing horizontal type TPN MCB distribution board, 6-way (4+18), double door, 415 V (without MCB/RCCB) |
| 87 | Supplying & fixing horizontal type TPN MCB distribution board, 8-way (4+24), double door, 415 V (without MCB/RCCB) |
| 88 | Supplying & fixing 5-32 A SP MCB, C curve, 10 kA (for lighting/power circuits) |
| 89 | Supplying & fixing 40 A 4-pole MCB |
| 90 | Supplying & fixing 40 A 4-pole RCCB (30mA) |
| 91 | Supplying & fixing 63 A 4-pole RCCB (30mA) |
| 92 | Supply and fixing of GI electrode earthing 84 mm dia x 3 m with CCM & BEE MOIST compound, maintenance free, incl. testing |
| 93 | 25 mm x 5 mm GI strip in 40 mm dia GI pipe from electrode, incl. connection & excavation |
| 94 | Supplying & fixing 15 W LED Bulb light fitting (Wipro LL20-111-XXX-65NE3 or equiv.) |
| 95 | Supplying & fixing 20 W LED bulb light fitting (Wipro LL20-111-XXX-65NE3 or equiv.) |
| 96 | Supplying & fixing 2'x2' LED recess fixture 3000 lumens, ≤36W (WIPRO CR010 RO 38HP57GL or equiv.) |
| 97 | Carriage of different materials from source to site of work by MT.(A) stone foe an avg leads of 10km by MT. |
| 98 | B) Sand/bajri for an avg leads of 10 km by MT. |
| 99 | C) Cement /Steel for an avg leads of 10 km by MT. |
| 100 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 101 | Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: Two Coats |
| 102 | Providing, laying and fixing of motar able passage Gate(12'-00\\"x6'-00\\") main passage gate 4'x6' including all sorts of carriage complete job. Please Enable Macros to View BoQ information |
