|
| 1 | Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
| 2 | All kinds of soil |
| 3 | Pipes, cables etc, not exceeding 80 mm dia. |
| 4 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 6 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 7 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 8 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 9 | Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red |
| 10 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 11 | 1:4 (1 cement: 4 fine sand) |
| 12 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 13 | Kitchen sink without drain board |
| 14 | 610x460 mm bowl depth 200 mm |
| 15 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 16 | Orissa pattern W.C. pan of size 580x440 mm |
| 17 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 18 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 19 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. |
| 20 | 10 litre (full flush) capacity-white |
| 21 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 22 | White solid plastic seat with lid |
| 23 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 24 | Flexible pipe |
| 25 | 40 mm dia |
| 26 | Providing and fixing soil, waste and vent pipes : |
| 27 | 75 mm diameter : |
| 28 | Sand cast iron S&S pipe as per IS: 1729 |
| 29 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 30 | 100 mm inlet and 75 mm outlet |
| 31 | Sand Cast Iron S&S as per IS- 1729 |
| 32 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.Internal work - Exposed on wall |
| 33 | 15 mm dia nominal bore |
| 34 | 20 mm dia nominal bore |
| 35 | 25 mm dia nominal bore |
| 36 | 40 mm dia nominal bore |
| 37 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): |
| 38 | 25 mm nominal bore |
| 39 | 20 mm nominal bore |
| 40 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 41 | 15 mm nominal bore |
| 42 | 20 mm nominal bore |
| 43 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 44 | 45 cm length |
| 45 | 15 mm nominal bore |
| 46 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): |
| 47 | 15 mm nominal bore |
| 48 | 20 mm nominal bore |
| 49 | 25 mm nominal bore |
| 50 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required: |
| 51 | 50 mm nominal bore |
| 52 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 53 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 54 | 15 mm nominal bore |
| 55 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 56 | 15 mm nominal bore |
| 57 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 58 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 59 | 15 mm nominal bore, 105 mm long, weighing not less than 138 gms |
| 60 | 20 mm nominal bore, 120 mm long, weighing not less than 198 gms |
| 61 | Providing and fixing of washbasin with C.I bracket with CP waste excluding pillar tap size 22\\" x 16\\" |
| 62 | Providing and fixing of white vitreous china water closet wall hung (European type) with seat and lid, C.I.brackets, 40 mm flush bend with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid and tank complete (Make Cera Ivory) |
| 63 | Providing and fixing of china ware half stall urinal with PVC spreader with CP dome waste complete in all respects |
| 64 | Providing and fixing of china ware urinal partition complete in all respects of approved make |
| 65 | Providing and fixing of soap dish of approved make complete in all respects |
| 66 | Provding and fixing of C.P grating 100 mm dia |
| 67 | Providing & fixing of Looking glass 5 mm thick of approved make with 32mm PVC Beading complete in all respects. |
| 68 | Providing & fixing of CP towel ring Normal round. |
| 69 | Provding and fixing of Low level cistern fitting of Superflow/Supernova make |
| 70 | Providing & fixing of C.P Waste 32 mm x 130 mm full threaded heavy duty of approved make complete in all respects. |
| 71 | Providing & fixing of PVC Handle for Low Level cistern of approved make complete in all respects. |
| 72 | Providing & fixing of PTMT Ball cock for low level cistern |
| 73 | Providing & fixing of C.P long Bend 32 mm dia |
| 74 | Providing & fixing of 100 mm dia C.I P Trap of approved make complete in all respects. |
| 75 | Provinding and fixing of PVC Tank cover with clamp complete of following capacity: |
| 76 | 1000 ltrs |
| 77 | 2000 ltrs |
| 78 | 5000 ltrs |
| 79 | Providing and fixing of PVC pipe 6 kg /cm2 including cost of jointing & stringing complete in all respects |
| 80 | 100 mm |
| 81 | 75 mm |
| 82 | Providing & fixing of Hand Shower (Health Faucet) (ABS Body) with 1 Meter Long Easy Flex Tube in Chr ome Finish & W all Hook complete Make Jaquar Model ALD-585 or equivalent |
| 83 | Provding and fixing of CP pillar Cock Pressmatic of Make Jaquar PRS-CHR-031 complete in all respect |
| 84 | Conversion of OWC to EWC complete in all respect to the entire staisfaction of EIC. |
| 85 | Providing and fixing of washbasin with full pedestal complete in all respect as pr approved make list |
| 86 | Provding aand fixing of floor mounted EWC on peice with complete fitting complete in all respect to the entire statisfaction of EIC make as per appproved make list |
| 87 | Provding and fixing of wall mixture with bend complete in all respect make jaquar |
| 88 | Provding and fixing of angle cock complete in all respect make jaquar |
| 89 | Provding and fixing of long nose complete in all respect make jaquar |
| 90 | Provding and fixing of Arcylic Soap Dish with screw 200 ml complete in all respect Make Viking |
| 91 | Providing and fixing wash basin under counter basin fitted with all fixing accessories set complete in all respect as per site requirement size of wash basin make as approved by EIC. Make Hindware Please Enable Macros to View BoQ information |
