|
| 1 | Erection of German Technology Aluminium Struture as per Manufacturer Specification with PVC Tensile Fabric fitted to frames with necessary cross bracing, wind tie & Struts as necessary (All materials are contractor's property) |
| 2 | Construction of Pandel made with Bhaluka Bamboo post 100 mm to 150mm dia and sal bali post of various length from eve point to ridge height 4.20 m to ridge height 7.70m (All materials are contractor's property) |
| 3 | Kutchi design cloth decoration in ceiling of the pandal and side decoration of the pandal with pleated design cloth both inside and outside and removal of the same after the function (All materials are contractor's property) |
| 4 | Temporary wooden flooring 150 mm height over the ground with 19 mm thick ply wood including fitting and fixing with iron screw, nails etc. as directed by the Deptt. |
| 5 | Hiring and installation of Red Carpet at the entrance of the hanger. |
| 6 | Hire Charge of Plastic Chairs including carriage as directed by department ( for 3 days) |
| 7 | Hire charge of VIP Chairs including carriage as directed by department. (3 Days) |
| 8 | Hire charge of Table (3 Days) |
| 9 | Hire charge of VIP sofa set including carriage as directed by department. (5 Days) |
| 10 | Construction of view cutters made of tricolour cloth fixed with bamboo frame and wooden post etc & removal of same after function including all carriage |
| 11 | Providing fitting and fixing temporary steel barricading of 1.20M height as per specification complete. |
| 12 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil |
| 13 | Providing GCI sheet walling with Bhaluka bamboo dressed [email protected] to 2.00m c/c driven atleast 0.60m with 4nos. Horizontal jati bamboo tied with GI wire etc complete as directed including cost of carriage for construction as well as dismentaling after the program is over. |
| 14 | Hire charge of Pagoda of size 6.00m X 6.00 m including carriage as directed by department. |
| 15 | Providing, fitting and fixing in position plywood / hardboard partion walls with 12mm thick plyboard / hardboard (best) with horizontal and vertical battens of size 50mm x 50mm spaced at not more than 0.80 m apart with necessary nails, wood screws, bolts etc. complete as directed by the Department for all levels (Painting / Varnishing to be measured and paid separately). |
| 16 | Providing, fitting and fixing in position partion walls with 12 mm thick plyboard with Chain link fabric fencing mesh of size 25x25 mm made of G.I. wire of dia 3 mm horizontal and vertical battens of size 75mm x 50mm spaced at not more than 0.80 m apart with necessary nails, wood screws, bolts etc. complete as directed by the Department for all levels Please Enable Macros to View BoQ information |
