|
| 1 | civil works |
| 2 | 2.31Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared |
| 3 | 2.8.1Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 4 | 4.1.8Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 5 | 5.1.2Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | 5.9.1Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 7 | 5.22.6Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 8 | 50.10.1Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 9 | 50.10.2Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 10 | 12.7.1Providing and fixing 15cm wide, 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m2 |
| 11 | 12.41.2Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter |
| 12 | 12.50Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 13 | 50.6.1.5Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete |
| 14 | 10.2Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 15 | 13.1.112 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 16 | 13.46.1Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 17 | 13.48.3Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 18 | 23.1.1.1Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS: 2800 ( part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools plants & machineries required for the job, all complete as per direction of Engineer - in- Charge, upto 90 metre depth below ground level.All types of soil300 mm dia |
| 19 | 23.3.2Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS : 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer- in- Charge.150 mm nominal size dia |
| 20 | 23.5Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer -in- charges |
| 21 | OD140999/2025-2026 Providing suplying and installation of Borewell Submersible Pump-1.5HP water cooling with 6mm dia ss rop including all accessories, fittings etc complete of approved IS make as perdesign and drawings and decision of Engineer-at-site. |
| 22 | 50.18.7.4.1Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall |
| 23 | 50.18.8.7.1Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2 |
| 24 | 50.18.9.20.1Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow |
| 25 | 50.18.9.20.2Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63 dia 45 degree Elbow |
| 26 | 50.18.9.20.4Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend |
| 27 | 50.18.9.20.8Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia End cap |
| 28 | 50.18.9.20.9Providing and fixing PVC moulded fitting / accessories for Rigid PVC pipes, including jointing with PVC solvent cement-63 mm dia Socket /coupling |
| 29 | 50.18.9.20.10Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63x50 mm dia Reducer |
| 30 | OD140997/2025-2026:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machinecut for inauguration stone, of required size, approved shade, colour and texture laid over 20 mm thickbase cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed withmatching pigment, epoxy touch ups, including rubbing, curing complete at all levels. <br>Area of slabover 0.50 sqm |
| 31 | OD141001/2025-2026supplying and fixing 63mm hose pipe |
| 32 | 16.21Engraving letters in hard stone |
| 33 | 13.71Lettering with black Japan pint of approved brand and manufacture |
| 34 | 17.7.3Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 35 | OD140998/2025-2026providing and fixing 160 mm PPR pipe triple layer PN 20 |
| 36 | OD141002/2025-2026PROVIDING AND FIXING PPR 160 mm coupler |
| 37 | OD140996/2025-2026 providing and fixing ppr 160 mm elbow |
| 38 | OD141000/2025-2026providing and fixing ppr end cap |
| 39 | supply and installation of hatchery accessories(RAS,ETP, Pump room accessories)) |
| 40 | OD141007/2025-2026BIOLOGICAL FILTER 25T- Supply andinstallation of BIOLOGICAL FILTER 25Twith sediment tank of length 10feet, height3feet, width 3feet, bio media 500kgRectangular shape polypropylene tank, as per the instruction of Engineer - in - charge. |
| 41 | OD141012/2025-2026CIRCULAR COLLETION TANK -Supply and installation of PP CIRCULARTANK 2TON with Height 3.5 feet, width 5feet, of wall thickness 6mm bottomthickness 12mm, as per the instruction of Engineer - in - charge. |
| 42 | OD141009/2025-20261 HP PUMP - Supply and installation of 1HP PUMP of 220V/50Hz, Single phase,with one year of warranty as perthe instruction of Engineer - in - charge. |
| 43 | OD141003/2025-2026Pressure sand filter multi port valve -Supply and Installation of Pressure sandfilter multi port valve, V900 Dia-\\"32\\" TopMount Filter,2.0\\"valve - 24600 Litres,capacity of following features.* Fibre glass reinforced tank with UVresistant surface finish.* Internal surface of the tank is finished withwater resistant resin.* Spherical tank with uniform wallthickness.* facilities for back washing.* One year of warranty.. etc Andall installations are as per the instruction of Engineer - in - charge. |
| 44 | OD141011/2025-2026UV sterlizer - Supply and Installation of UV sterlizer of stainless steel ,UV system 120-240V,40W with Timer, more than one yearof warranty,all installations are as per the instruction of Engineer - in - charge. |
| 45 | OD141017/2025-2026Air blower - Supply and Installation of AirBlower of 1 HP, 750 watts,220V/240V,2000 lpm with one year warrantyas per the instruction of Engineer - in - charge. |
| 46 | OD141010/2025-2026Pressure sand filter multi port valve - Supply andInstallation of Pressure sand filter multi port valve, V900Dia-"36" Top Mount Filter,2.0"valve - 31200 Litres, capacity of following features.* Fibre glass reinforced tank with UV resistant surfacefinish.* Internal surface of the tank is finished with water resistantresin.* Spherical tank with uniform wall thickness.* facilities for back washing.* one year of warranty.. etc And all installations are as per the instruction of Engineer - in - charge |
| 47 | OD141004/2025-2026UV sterlizer - Supply and Installation of UV sterlizer of stainless steel ,UV system 120-240V,40W with Timer, and have one year of warranty, all installations are asper the instruction of Engineer - in - charge. |
| 48 | OD141008/2025-2026Jumbo catridge filter - Supply and Installation of Jumbo catridge filter, CF100 -100fts Cartridge Filter with 2.0\\"- 22900 Litres capacity, Compact, low profile UV resistant tank, Easy to access to cartridge element viaheavy duty lock ring, Auto air bleed for removal of trapped airinside filter and reduced the damage of filter, Suitable for pools and spas, fresh or salt water, Quality oil filled pressure gauge for inspection of operating pressure, Manual air bleeding installation with one year of warranty and allinstallations are as per the instruction of Engineer - in - charge. |
| 49 | OD141005/2025-2026 UV sterilizer - Supply and installation of UV sterilizer of stainless steel, UV system 120-240 V, 40 W with timer, more than one year of warranty, all installations are as per the instruction of Engineer in charge |
| 50 | OD141013/2025-2026Air blower - Supply and Installation of Air blower ring type Single phase(1.5Hp) of 1.50KW,2.4 m3/hr, 220/240V , of least sound pollution with one year ofwarranty and all installations are as per the instruction of Engineer - in - charge |
| 51 | OD141015/2025-2026Air blower - Supply and Installation of Air blower ring type Single phase(1Hp) of 1.20KW,2.4 m3/hr, 220/240V, least sound pollution with one year of warrantyand all installations are as per the instruction of Engineer - in - charge |
| 52 | OD141006/2025-20261Hp pump-Swimming pool type of Pump 1.0HP, 220V/50Hz, Single phase with following features,*Asynchronous, Two Poles.* Class insulation: 130.* IPX5 Waterproof standard.* Built-in thermal protection.* Overload protection.* Available in 50Hz or 60Hz with 220V/330V/110V, Special design union compatible for both imperial andMetric.* One year of warranty.. etc And all installations are as per the instruction of Engineer - in - charge |
| 53 | OD141018/2025-20261/2" SS tube - Supply and Installation of 1/2" SS tube for incubation jar as per the instruction of Engineer - in - charge. |
| 54 | OD141016/2025-2026Plumbing accessories - Supply andInstallation of Suitable PlumbingAccessories and valves required for the thefuntioning of Recirculatory AquacultureSystem like 4\\" to 3/4\\" PVC pipes, valves,fitting... etc as per the instruction of Engineer - in - charge. |
| 55 | OD141014/2025-2026Plumbing accessories (Reservoir OHT and ETP plumbing accessories ) |
| 56 | Bio fencing |
| 57 | 2.31Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared |
| 58 | 50.2.26.1Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in- charge. |
| 59 | 4.1.8Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 60 | 4.1.3Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 61 | 50.6.1.1Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete |
| 62 | 13.1.112 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) Please Enable Macros to View BoQ information |
