|
| 1 | Earth Work in excavation of foundation in hard soil within initial leads of 50m & lifts of 1.5m including dressing and levelling of bed etc. and adding contractor's profit and over head charges, etc. complete in all respect for the work as directed by the Engineer-in-charge. |
| 2 | Supplying & filling of foundation with course sand well watered and rammed including cost, cost of all labour, carriage, royalty complete in all respect and as per direction of Engineer-in-Charge. |
| 3 | Cement Concrete (1:3:6) using 4cm size hard granite C.B. metal approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete. |
| 4 | R.C.C.M-25 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement.RCC work of M-25 grade concrete in Column Base Footing |
| 5 | RCC work of M-25 grade concrete in Column Super StructureGround Floor |
| 6 | Head room |
| 7 | RCC work of M-25 grade concrete in Plinth Band |
| 8 | RCC work of M-25 grade concrete in Lintel BandGround Floor |
| 9 | RCC work of M-25 grade concrete in floor BeamGround Floor |
| 10 | RCC work of M-25 grade concrete in Roof BeamHead room |
| 11 | RCC work of M-25 grade concrete in ChajjaGround Floor |
| 12 | Head room |
| 13 | RCC work of M-25 grade concrete in StaircaseGround Floor |
| 14 | RCC work of M-25 grade concrete in Roof SlabGround Floor |
| 15 | Head room |
| 16 | Straightening, cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. rods or tor confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. works including cost, conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour etc.complete in all respect.Ground Floor |
| 17 | Head room |
| 18 | Fly ash brick masonry in cement mortar (1:6) in Superstructure using bricks of 25cm x 12cm x 8cm size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.in Foundation and Plinth |
| 19 | in Super Structure |
| 20 | Head room |
| 21 | At Outer side 12 mm (1/2\\") thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge. Ground Floor |
| 22 | Head room |
| 23 | In Inner Side 16 mm thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge. Ground Floor |
| 24 | Head room |
| 25 | 6mm thick cement plaster (1:4) over RCC works including deep chipping, finished smooth with proper thickness, watering, curing for required days with cost, conveyance, royality, taxes of all materials and labour with T&P required or the work etc. complete in all respect as per drawing and technical specification and as directed by the Engineer-in-Charge. Head room |
| 26 | Supplying, fitting and fixing vetrified tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C. Ground Floor |
| 27 | Supplying, fitting and fixing Granaite tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C. Ground Floor |
| 28 | Fixing tiles in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete. Ground Floor |
| 29 | Finishing wall surface with Cement based wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour etc. complete. Ground Floor |
| 30 | Head room |
| 31 | Priming 1 coat with wall primer water bond cement primer including all labour, materials etc. complete. Ground Floor |
| 32 | Head room Outside |
| 33 | Head room Inside |
| 34 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete.Ground Floor |
| 35 | Head room |
| 36 | Wall painting two coat with any approved weather coat paint including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. Ground Floor |
| 37 | Head room |
| 38 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect. |
| 39 | Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses, purlines, frames of doors, windows, ventilabours and beams. |
| 40 | Supplying and fixing W.I. clamps 33cm to 38Cm long of 35mm × 5mm size for doors and windows and ventilators including fixing in cement concrete (1:3:6) with 12mm, to 20mm hard stone chips or in cement mortar (1:3) including cost of allDoors |
| 41 | Supplying of M.S. Door, Window with grills, Grills made out of M.S. Angle frame, M.S. Flat, Sheet etc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour charges, carriage of materials to site etc. complete. Ground FloorDoor |
| 42 | Grill |
| 43 | Head roomDoor |
| 44 | Grill |
| 45 | Providing and fixing ISI marked 35 mm thick flush door shutters confonning to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete SR-2022, Page 234, Sl No-8Ground Floor |
| 46 | Supplying, fitting, fixing of two track UPVC Sliding window track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with 6mm thick glass of approved quality complete with frame. Sutters and all fitting and fixtures. Head room |
| 47 | Priming one coat with any approved primmer (To Receive Enamel paint) including cost of primmer & labour to give an even shade excluding cost of primer. (As per A.R. 93/1)Ground Floor |
| 48 | Head room |
| 49 | Painting Two coat with any approved S/E paint over a coat of primer to wood / iron works including sand papering, polishing the surface including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge. Ground Floor |
| 50 | Head room |
| 51 | 25mm thick CC 1:2:2 with 6mm size CB chips for grading concret over roof slab etc. complete.Ground Floor |
| 52 | Head room |
| 53 | Cement Concrete (1:2:4) using 12mm size hard granite C.B. chips approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. |
| 54 | Providing & applying of pre constructional anti-termite treatment by drilling 12mm dia holes at distance of 30cm @ junction of wall & floor about 300mm apart deep enough to reach the soil below & chemical emulsion (PREMISE, IMIDACHLOPRIED 30.5SC OF BAYER MAKE mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specification & the holes should be pluged the filling materials including cost of all materials, labour, conveyance, T&P , all taxes and hire charges of machinaries as per direction of Engineer-in-charge.Ground floor |
| 55 | E.IRecessed wiring to Modular light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 6Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection.(Make of wire-L&T/Anchor/Havells/V-Guard/Great White/HPL or any other approved make) Modular Group-A -L.P- F.P- C.B.P- |
| 56 | Modular Group-B L.P- F.P- C.B.P- |
| 57 | Modular Group-C L.P- F.P- C.B.P- |
| 58 | Supply and fixing of A.C Ceiling fan 48'' size, Minimum Air delivery-225 cum/min, 380rpm , BEE 1 star rated ISI Marked (Make-Usha striker neo/ Havells Velocity / Crompton HS or any other approved make) |
| 59 | Supply and fixing step type Modular fan regulator with wiring complete in all respect as per direction of engineer in charge. (Make-Havells/Cona/ Anchor or any other approved make) |
| 60 | SITC of Step Light 3watt Compact Light for Bedroom ,warm white (2700K) |
| 61 | Supply and fixing of 18watt Led batten polycarbonate body tube light, Luminousity: 100 lumens, Colour Temperature: 6500 Kelvin.(Make- Havells/ Philips/ Crompton/ HPL or any other approved make) |
| 62 | Supply and fixing of 9Watt LED bulb, holder base type: B22 , Colour Temperature 6500 Kelvin Average Life 10000 Hours(Make- Havells/ Philips/Crompton or any other approved make) |
| 63 | Supply and fixing of 300mm Exhaust Fan, Motor Speed: 1400 RPM Metal Blade, Double ball bearings heavy duty motor, metal bird guard, Air delivery (minimum): 1850 m³/h, Noise level : 40-45 dB |
| 64 | S/F of Ding Dong type call bell on suitable size phenolic laminated plate |
| 65 | Supply and fixing of 45 watt led streetlight Endura citylite platinum energy saving and environmental friendly long lige LED street light made up of pressure die cast alluminium housing with acrylic cover as diffuser with IP66 pretection and impact resistance of IK07 |
| 66 | Supply and fixing of 32amp motor starter on 2 module flush type GI box with suitable cover plate in front, 4 sqmm single core multistrand copper conductor as required between starter and 6-16 amp 3 pin shutterd socket on another flush type GI box |
| 67 | S/F of modular 6-16amp 3 pin modular shuttered socket with 16 Amp modular DP switch with indicator on 4 module GI box, wiring of plug with 4 sqmm wire, running earth with 1.5 sqmm PVC insulated copper conductor, 4 module cover plate in front complete in all respect suitable for friedge/ washing machine/ induction cook top point (Make of switch and socket- Havells/ Legrand/ Anchor or any other approved make) |
| 68 | S/F of 4 nos of 6/10 amp modular switch and 6 amp 5 pin shuttered socket on 12 module GI box with modular base plate and modular cover plate in front, complete in all respect (make of wire- Finolex/ L&T/ Anchor/ Havells/ V-Guard or any other approved make) |
| 69 | Supply and fixing of 6Amp plug with 6Amp switch on existing board (Modular type) |
| 70 | 63Amp Iron clad double pole main switch with M.S board.of size 250x300x60mm deep in recesss includig wall cutting and making good the same with wiring complete in all respect |
| 71 | Supply and laying 8 SWG copper wire ISI marked at 0.5 meter below ground level for conductor earth electorde including soldering etc. as required |
| 72 | Supply and fixing of earthing with copper plate 600 mm x 600 mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having locking arrangement and watering pipe etc (But with out charcoal and salt) as required |
| 73 | Extra for using salt and charcoal for G.I. or copper plate earth as required |
| 74 | Supply and laying 25 mm x 5 mm copper srip on surface or in recess for connection etc as required |
| 75 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S or any other approved make.)16way Double door |
| 76 | 8way, Double door |
| 77 | Supply and fixing of following rating 240 V/415 V \\"C\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-HPL/ Havells/ Legrand /L&T/C&S or any other approved make)SP MCB 6-32A C-series |
| 78 | DP MCB 6-32A C-series |
| 79 | Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL or any other approved make) 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia |
| 80 | 2 X 2.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia |
| 81 | 2 X 4 sq.mm +1 X 1.5 sq.mm in 20 mm dia |
| 82 | 2 X 6 sq.mm +1 X 2.5 sq.mm in 25mm dia |
| 83 | 2 X 1.5sqmm for inverter wiring |
| 84 | Supply & Installation of 6 Mtrs GI Octagonal Pole Fabricated Part as per Dimension : Top Dia 70 mm, Bottom Dia.-130 mm ,Section-1 (Section Length-6000mm) Thickness-4mm Base Plate-220 mmx220mmx12mm . (G.I. AS per IS 2629), PCD-220MM ,Foundation Bolts Suitable for 6mtr Pole |
| 85 | Supply of 40Watt AIO Solar Street Light with 60Wp High efficiency monocrystalline panel 30Ah Battery for 2days back in dimming mode . Warranty 5years (Make -WIPRO,Panasonic & equivalent) |
| 86 | CIVIL Foundation work along with materials & erection, Commissioning of Pole with AIO Streetlight. |
| 87 | Supply and fixing of twin core unarmoured PVC insulated 6 sqmm Al wire with GI wire support |
| 88 | P.H Work Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge (Ashirbad/Supreme/Oripalst)GF Floor -20mm dia C-PVC pipe (Ashirbad/Supreme/Oripalst) |
| 89 | 25mm dia C-PVC pipe |
| 90 | Supplying all materials, labour,T&Pand providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/04 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge(Supreme/Ashirvad/Oriplast) Ground Floor 25mm UPVC ASTM Pipe |
| 91 | 32mm UPVC ASTM Pipe |
| 92 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar ( 1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.G. Floor |
| 93 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per the direction of the Engineer in chargeG. Floor |
| 94 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge. 15mm dia long body Bib Cock cock (Jaquar)-CON-CHR-107KN |
| 95 | 20mm dia CP concealed stop cock(Jaquar)CON-CHR-087KN |
| 96 | 15mm dia CP angle stop cock (FLR-ACR-5053N) |
| 97 | 15mm dia CP SINK cock (Jaquar)FLR-CHR-5347N |
| 98 | 15mm dia CP Pillar cock (Jaquar)CON-CHR-021KN |
| 99 | HAND SHOWER (HEALTH FAUCET) WITH 1 METER (Jaquar- ALD-CHR-565 |
| 100 | 15mm dia Two way Bib Cock (Jaquar)-CON-CHR-041KN |
| 101 | Shower Arm (SHA-CHR-477) |
| 102 | Over head shower 100mm dia round (OHS-CHR-1999) |
| 103 | 25mm dia brass or gun metal full way valve(shakti make) |
| 104 | 32mm dia brass or gun metal full way valve(shakti make) |
| 105 | 15mm dia CP Flange |
| 106 | 15mm dia CP Extention Nipple |
| 107 | 125mm CP grating |
| 108 | Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class Fly ash brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. Fixing 1000 Ltr Roto-moulded water storage tank (Syntax Make) 3 layer on the roof of First floor |
| 109 | Supplying all materials, labour, T&P and fitting and fixing UPVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturers specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge In (Ashirbad /Oriplas/Oriplast)110mm dia U-PVC SWR pipeGround floor |
| 110 | 75 mm dia UPVC SWR Pipe |
| 111 | 110mm U-PVC door tee |
| 112 | 110mm U-PVC Plain tee |
| 113 | 110mm U-PVC door bend |
| 114 | 110mm U-PVC plain bend |
| 115 | 110mm dia U-PVC 'P' trap |
| 116 | 110mm dia U-PVC Plain Shoe Bend |
| 117 | 110mm dia U-PVC offset with out ear |
| 118 | 110mm dia U-PVC cowl |
| 119 | 110mm dia U-PVC Socket plain |
| 120 | 75 mm dia UPVC plain bend (supreme/ashirvad) |
| 121 | PVC clamp suitable for 75 mm to 110mm dia pipe |
| 122 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral Por S trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge. One Piece Closet \\"Cedar\\" With integrated Jet Flush(Cat.92512)Hindware. |
| 123 | Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge. 550mmx440 mm size wash hand basin With porcelain pedestal (Parryware/Hindware/Cera/Somany/Kerovit) |
| 124 | 550mmx440 mm size wash hand basin (Without porcelain pedestal) (Parryware/Hindware/Cera/Somany/Kerovit) |
| 125 | Supplying all materials ,labour ,T&P and fixing wash kitchen sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste , fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc. including cutting holes in walls and making good the damages etc.all complete as per specification and direction of Engineer-in-charge600x450x250 mm stainless steel kitchen sink-glossy-IS:13983 - 1994 (Jayna make) |
| 126 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mmx600mm long CP towel rail |
| 127 | CP Towel ring |
| 128 | Supplying all materials ,labour ,T&P and fixing CP Soap Holder complete with CP brass brackets fixed to wooden plugs with chromium plated brass screws etc.all complete as per specification and direction of Engineer-in-charge. CP soap holder |
| 129 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to woden plugs with CP screws as per specification and direction of the Engineer in charge.600mmx125mm glass shelf with CP/NP guard rails |
| 130 | Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in chargeMirror(Bevellededge) 600mmx450mm |
| 131 | Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etcall complete as per direction of the Engineer in charge.Ground Floor;- |
| 132 | Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-chargeGround Floor;- |
| 133 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C.Ground Floor;- |
| 134 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge Ground Floor. |
| 135 | Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. Kajaria / Somany / Johnson to be pre-approved 600 x 600mm of size In Ground Floor |
| 136 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. Kajaria / Somany 300mm x 600 mm size of Ground Floor |
| 137 | Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm. (Darwaja /Exon Door make) 2x0.75x2.10= |
| 138 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge.Inside size 250mmx250mm |
| 139 | Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mmx760mmx460mm |
| 140 | Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 910mmx910mmx910mm |
| 141 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.1.20m dia x 2.00m deep soakway pit |
| 142 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class 3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturers specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C 1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia UPVC Alround Concrete |
| 143 | Construction of 10 users septic tankEarth work in stoney earth and gravels mixed with stone and boulder not exceeding 0.014 Cum in volume within 50m initiallead and 1.5 m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per specification approved by the Department.2.99mx1.89mx1.50m= |
| 144 | 2.99mx1.89mx0.63m= |
| 145 | Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge2.99mx1.89mx0.15m= |
| 146 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeGroung Floor 2.99mx1.89mx0.08m= |
| 147 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor |
| 148 | Supplying all materials, labour, T&P and providing brick work with FAbricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 149 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor |
| 150 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeGround Floor |
| 151 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs |
| 152 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeGround Floor |
| 153 | Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeGround Floor2.53mx1.43mx0.10m= |
| 154 | Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge |
| 155 | Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. |
| 156 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge Please Enable Macros to View BoQ information |
