|
| 1 | Supply Item |
| 2 | Collimeter Tube |
| 3 | Lens Barrel Assembly |
| 4 | Fibre Optic Cable |
| 5 | Detector Head Assembly |
| 6 | Scanner Housing Card |
| 7 | 5 Pin Female Connector with Pig Tail Cable |
| 8 | Screw |
| 9 | Quartz Lens |
| 10 | Remote meter assembly (4 Flame Intensity meter set) |
| 11 | Power supply card |
| 12 | Intensity & Fault detection card |
| 13 | Frequency detection card |
| 14 | Lamp & meter card |
| 15 | Lamp drive card (Safe-II) |
| 16 | 2/4 Flame indication card |
| 17 | Spacer |
| 18 | Mounting plate |
| 19 | Compression spring |
| 20 | Jam nut, P/N: ITEM 31 of D-982-0137 |
| 21 | Gasket |
| 22 | Connector, MS-3470 L 145PN, 5 PIN male, Suitable for scanner head assembly |
| 23 | Protector Plate |
| 24 | Fuse, (Little fuse for Lamp & Meter card) |
| 25 | Alumina insulator for spark rod assembly |
| 26 | Complete flame scanner Assembly |
| 27 | HEA Flexible cable for Ignitor |
| 28 | Excitor box (Input: 110VAC, 50 Hz), Input current: 5A AC, Output Voltage 2500V DC with NEMA enclosure |
| 29 | Storage capacitor, 10 MFD, 2500V DC |
| 30 | Spark Tip for HEA Ignitor Rod |
| 31 | HEA Ignitor Rod |
| 32 | Rectractor for HEA IGNITOR |
| 33 | Solenoid valve (Input: 110V AC) for HEA Ignitor |
| 34 | Solenoid valve (Input: 240V AC) for HEA Ignitor |
| 35 | EXCITOR BOX (INPUT : 230VAC,50 Hz), Input Current: 5 A AC ,Output Voltage 2500 V DC, Weather proof with NEMA enclosure |
| 36 | HT Cable for HEA Ignitor Rod |
| 37 | Limit switch HEA ADV/RET |
| 38 | FLAME SCANNER HEAD TESTING & CALIBRATION KIT |
| 39 | Sub Total(From 1.01 to 1.38) |
| 40 | Total Packing & Forwarding Charges |
| 41 | Sub Total of Suppy+P&F |
| 42 | Total Freight Charges |
| 43 | Total Insurance Charges |
| 44 | Other taxes/ charges(If any) |
| 45 | Total Supply amount (3+3.1+3.2+3.3) Please Enable Macros to View BoQ information |
