|
| 1 | Earth WorK:-Excavation work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (A) All kind of soil. |
| 2 | Ordinary rock |
| 3 | Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc in layer not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50cm and lead up to 50 m and lift upto 1.5 mtr. |
| 4 | Dumping stone in horizontal on level in plinth excluding cost of stone |
| 5 | Providing and laying of stone soling/pitching/ dumping including cost of stone horizontal on level by hand packed tightly including all sort of complete. |
| 6 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:4:8 (1 cement : 4 coarse sand (zone-III) derived from natural source: 8 graded stone aggregate 20 mm nominal size)derived from natural sources. |
| 7 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural source: 6 graded stone aggregate 20 mm nominal size)derived from natural sources. |
| 8 | Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate) finished with a floating coat neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 50mm thick with 20mm nominals size stone aggregate. |
| 9 | Dry random rubble masonry with hard stone in foundation and plinth:With bond stone, quarry stone |
| 10 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3graded stone aggregate 20 mm nominal size) cruched |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate20mm nominal size).crushed |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 13 | Providing and fixing up to floor five level precast cement concrete solid block including hoisting and setting in position with cement mortar 1:3( 1cement :3 coarse sand) cost of required centering ,shuttering complete 1:3:6 ( 1 Cement :3 coarse sand (zone-III) : 6 graded stone aggregate 20mm nominal size). |
| 14 | Providing and fixing of Sun-Dried mud solid blocks including hoistion and setting in position with cement mortar 1:3( 1cement :3 coarse sand) including cost of required centering shuttering and carriage complete. |
| 15 | Centering and shuttering including shuttering propping etc and removal of form for :Foundations, footings ,bases of columns ,etc for mass concrete walls ( any thicknee) including attached pilasters, buttresses plinth and string coarse.etc |
| 16 | Centering and shuttering including shuttering propping etc and removal of form for Columns, pillars, piers, abutments, posts and struts. |
| 17 | Centering and shuttering including shuttering propping etc and removal of form for Suspended floors, roofs, landings, balconies and assess plate forms. |
| 18 | Centering and shuttering including shuttering propping etc and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 19 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for seperately) second class kail wood. inculing window glass with all complte job. |
| 20 | Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for seperately,all complete as per direction of Engineer-in-charge.(second class kail wood 35 mm thick shutter)size of 7\\"x5\\" with traditional style etc. |
| 21 | Providing and fixing of combiners toughned (tempered)glass with a double glazing unite (DGU) also brown in colour with traditional size 7\\"x5\\" and complte job in the views of engineer in charge. |
| 22 | CEMENT PLASTER (IN COARSE SAND) 20 mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand) |
| 23 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 24 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/litre of approved brand and manufacture , including applying additional coats wherever required to achieve even shade and colour two coats. |
| 25 | Varnishing with varnish of approved brand and manufacture:Two or more coats of glue sizing with copal varnish over and under coat of flatting varnish. |
| 26 | Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with; 2nd class kail wood etc |
| 27 | Providing wood work in frames of false celing, partitions etc. Sawn and fixed in position with necessary stainless steel screws etc Budlloo/ fir wood etc.should be 7\\"xs\\" mm kail wood with varnished and polishing all complete job in the view of engineer in charge. |
| 28 | Providing and fixing wooden flooring in 25mm kail wood planks to be fixed in a traditional way with cutting size of 2\\"x6\\" on wall and flooring with paints and varnished all complete job. |
| 29 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 30 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 31 | Providing and fixing white vitreous china Water closet squatting pan (Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary material I/C mablba , all complete as per the direction of Engineer -in- charge . Orissa pattern W.C pan of size 580x440mm. |
| 32 | P/F Stainless steel 304( 18/8) kitchen sink kasper IS:13983 with C.I Brakets and stain less steel plug 40 mm including painting of fittings sand brackets,cutting and making good the walls wherever required. |
| 33 | Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:White vitreous china wash basin size 630x450mm with a pair of 15mm C.P Brass pillar tape JAGUAR/CERA/HINDWARE Make. |
| 34 | P/F of mirrors of superior glass with plastic moulded frame(of approved quality) and of required size and shape. With 6mm thick hard board backing. Rectangular Shape 1500 x 450 mm |
| 35 | Providing hoisting and fixing trusses/purlins/rafters/posts/post plates or like components of 2nd class budloo/fir wood including cost of screws etc complete. |
| 36 | providing and fixing of pre coated galvanized iron profile (Size shapes and pitch of corrugation as per approved or directed by site engineer) sheet roofing including necessary nail/washers, gable part eaves board, weather board, Ridges hooks, bolts of approved brand including complete job 0.80mm thick with zinc caoating not less then 275 grm /sqm complete , |
| 37 | Provision for a traditional Painting on kaju, on walls pillar and required site such as simple traditional panints and design on a wall as pillars ,column and beams complete. |
| 38 | Providing and fixing soil waste & vent pipe (A) PVC Pipe 110mm dia (10 feet Unit Length) |
| 39 | PVC Pipe. 75mm dia (10 feet unit Length) |
| 40 | PVC Bend 110mm dia |
| 41 | PVC Bend 75mm dia |
| 42 | PVC Tee 110mm dia |
| 43 | PVC Tee 75mm dia |
| 44 | PVC Collar 110mm dia |
| 45 | PVC Collar 75mm dia |
| 46 | PVC trap 110mm dia |
| 47 | PVC trap 75mm dia |
| 48 | PVC Socket 110mm dia |
| 49 | PVC Socket 75mm dia |
| 50 | PVC door junction 110mm dia |
| 51 | PVC door junction 75mm dia |
| 52 | Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe , 25mm OD(SDR-7.4) |
| 53 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 54 | P/F CP brass toilet paper holder including cost of wodden,PVC,play etc. |
| 55 | Providing and fixing Wall mount Liquid Soap Dispenser of approved brand |
| 56 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm, 78 mmwide and effective height of 88 mm, weighing not less than 170 gms |
| 57 | Providing and fixing accessories of standard and quality make of approved manufacturer including all necessary fixtures required. L-Drops for room doors. |
| 58 | T-Bolts for doors. |
| 59 | T-Bolts for Windows. |
| 60 | Handle for doors |
| 61 | Handles for Windows. |
| 62 | 15mm C.P Brass tap with elbow operation lever. |
| 63 | Providing and fixing of C.P brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore. |
| 64 | Providing and fixing C.P brass angle valve for basinmixer and geyer points of approved quality conforming to IS:8931 15mm nominals bore. |
| 65 | Providing and fixing C.P brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in charge. |
| 66 | 15mm nominals bore of standards back type CP brass close hole basin mixer pillar tap of approved quality and make weighting not less than 1.970kg. |
| 67 | High water pressure S.S geyser connection pipe (2 feet long) of approved brand etc. |
| 68 | 15mm CP Brass ABS Health Faucet jet sprays with house holder of approved quality conforming to IS standards (KOHLER/JAGUAR/CERA/HINDWARE )etc. |
| 69 | Providing and fixing of hardware items like latch lock,hing, t-bolt,aluminium, handle aluminimum, locks and bathroom fixture, joints slbow,nipple,bent,etc all small asserioce required of hard ware work including all necessary items complete job. |
| 70 | Carriage of different materials from source to site of work by MT.(A) stone for an avg leads of 10km by MT. |
| 71 | B) Sand/bajri for an avg leads of 10 km by MT. |
| 72 | C) Cement /Steel for an avg leads of 03 km by MT. |
| 73 | Provision for the curtain on windows wall to wall as per engineer in charge choice including fitting and carriage and all necessary items complete. |
| 74 | Rod for curtain and all necessary items complete. |
| 75 | Providing and fixing of furniture such as beds table and sofa as per traditional design including loading unloading and stacking complete job.(A)Sofa |
| 76 | B)Bed set |
| 77 | C)Table |
| 78 | Provision for the traditional table in hall for the any type of function including all carriage complete.(A) Traditional table (Si-chok) etc. |
| 79 | Provision for a traditional Painting on kaju, on walls pillar and required site such as simple traditional panints and design on a wall as pillars ,column and beams complete. |
| 80 | Drilling of 125mm dia submersible pump well in collapsible strata, conglomerate, boulders, gravels, pebble, silt clay, rock etc formation what so ever in countered in district kargil. The job in envisages construction pump wells of an average depth of 60 mtr, below ground level or till the sufficient discharge of water is avalable from the bore holes using 115 mm Odex/DTH method and exploration of under ground portable water by tapping sufficient again for zones with simultinously lowering of 125mm M.S/G.I plain ended pipe daly chamfered and welded. the job encludes all charges on account of cost ofdrilling/acessories/tools/attachments/bits/pol/consummable/labour etc with carriage of all meterials up to the site of work and including cost of supply and fixing of suitable casing pipe/shoe of adequate hardness which shall be provided by the contractor. the job also include development of drilled bore holes with air compresser of suitable capacity to clear the taped water from all suspended impurities. (A) Upto depth of 60mtr. |
| 81 | B) Extra for depth Beyond 60 Mtr. |
| 82 | Supply, installation, commissioningin 125 mm dia borewell incld a) junction box set ( Solar Modules, Multi cry stallin, 250 wp minimum)b) Junction box.c) Motor Pumpset (2.5 HP-3 HP Submersible AC PUMP 3 PHASE.( Dual Type:- Both solar/Electrical Run)D) Mounting/Support structure for solar modules fixed type.e) Delivery Pipe (G.I/MS/HDPE of 40 mm dia size for AC Pumps as per site requirement.f) Controller.h) other misc/B.O.S Items ( Nuts, Bolts, washer etc.) if any other required Material/work to be excavated complete job.i) Cement Concrete plateform of Size 4' x 4' incld necessary foundation and curing complete job. |
| 83 | Shifting of Machinery from one site to another site incld making approach road if necessary at site |
| 84 | Providing/Laying of PPR Pipe of dia 25 mm dia, 32 mm dia. 40 mm dia incld all necessary fitting items like gate valve , bibcokc, stop cock, elbow, tee, bibcock,serivce saddle.coupling,/compression fittings complete job. (A) 40mmdia. |
| 85 | PPR pipe 32mm dia Please Enable Macros to View BoQ information |
