|
| 1 | Earth work in excavation by mechnical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. Ordinary rock |
| 2 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m Ordinary rock as per the diretion of Engineer in Charge at site. |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:6:12 (1 cement : 6 fine sand : 12 graded stone aggregate 40 mm nominal size) as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size) as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size) as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Tata/Sail/Jindal Panther/Shyam steel or as approved by HPPWD. Thermo-Mechanically Treated bars of grade Fe-500D or more as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 11 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:4 (1 cement :4 coarse sand) as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 12 | Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like Cement mortar 1:6 (1 cement : 6 coarse sand) as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 13 | Stone soling properly hand packed filling interstices with spall and consolidating by hand ramming as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 14 | Providing and fixing 4mm teak ply (natural teak) linning in door shutters with butt jointing as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 15 | Providing and fixing bright finished stainless steel mortice latch and lock with levers and a pair of lever handles of approved quality with necessary screws etc. complete as per the direction of Engineer-In-Charge including carriage of mateials within all leads, lifts and heights (Godrej or equivalent make). |
| 16 | Providing and fixing bright finished stainless Steel sliding bolts as approved by the Engineer-In-Charge with necessary screws etc. complete 250x16 mm as per the directions of Engineer in Charge including carriage of materials within all leads, lifts and heights. (Godrej or equivalent make). |
| 17 | Providing and fixing bright finished stainless Steel tower bolt (barrel type) (heavy duty) as approved by the Engineer-In-Charge with necessary screws etc. complete 200X10 mm as per the directions of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 18 | Providing and fixing bright finished stainless Steel tower bolt (barrel type) (heavy duty) as approved by the Engineer-In-Charge with necessary screws etc. complete 150x10 mm as per the directions of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 19 | Providing and fixing bright finished stainless Steel tower bolt (barrel type) (heavy duty) as approved by the Engineer-In-Charge with necessary screws etc. complete100x10 mm as per the directions of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 20 | Providing and fixing bright finished stainless Steel handle (heavy duty) as approved by the Engineer-In-Charge with necessary screws etc. complete 150 mm as per the directions of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 21 | Providing and fixing bright finished stainless Steel handle (heavy duty) as approved by the Engineer-In-Charge with necessary screws etc. complete 125 mm as per the directions of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 22 | Providing and fixing bright finished stainless Steel hanging type floor stopper (heavy duty) as approved by the Engineer-In-Charge with necessary screws etc. complete as per the directions of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 23 | Providing and fixing bright finished stainless Steel hard drawn hooks and eyes (heavy duty) as approved by the Engineer-In-Charge with necessary screws etc. complete 100 mm as per the directions of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 24 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. Kajaria/RAK/Nitco or equivalent make (Basic rate not less than Rs. 45/-Sqft) as per the directions of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 25 | Providing and laying Vitrified tiles in Size of Tile 600x300 mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete Kajaria/RAK/Nitco or equivalent make (Basic rate not less than Rs. 50/-Sqft) as per the directions of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 26 | Providing and laying vitrified floor tiles in size of tile 600x600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete (Basic rate not less than Rs. 55/-Sqft) as per the directions of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 27 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and heights. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 28 | Providing and fixing 0.62 mm thick prepainted steel sheet Tata Durashine or equivelent make (as approved by Engineer-In-Charge) in roofing with hot dipped metallic zinc / aluminium-zinc alloy coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 mocrons over 5 microns primer coating including fixing with self driven steel screws / prepainted iron J or L hooks or seam bolts with prepainted limpet and rubber washers complete with all accesoriees as required as per the detailed drawings and direction of Engineer-In-Charge including carriage of material upto all leads, lifts and heights. |
| 29 | 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) as per the directions of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 30 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface Water thinnable cement primer as per the directions of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 31 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per the directions of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 32 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre as per the directions of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 33 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture as per the directions of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 34 | Polishing two or more cots with Malamine polish on old wood and wood based surfaces to give an evan surface including cleaning the surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 35 | Polishing two or more cots with Malamine polish on previously polished wood and wood based surfaces to give an evan surface including cleaning the surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 36 | Wall painting Two coats with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 37 | Demolishing cement concrete manually/ by mechanical means including disposal of material within all lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) including carriage of materials within all leads, lifts and heights. |
| 38 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within all lead as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and heights. In cement mortar |
| 39 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking of serviceable material and disposal of unserviceable material within all lead as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and heights. |
| 40 | Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material in specified manners within all lead. For thickness of tiles 10 mm to 25 mm as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 41 | Dismantling roofing including ridges, hips, valleys and gutters etc., and including stacking of serviceable materials in specified manners and disposal of unserviceable materials as per the direction of Engineer-In-Charge of G.I. Sheet including carriage of materials within all leads, lifts and heights. |
| 42 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking of serviceable materials in specified manners and disposal of unserviceable materials 75 to 80 mm dia pipe as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 43 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking of serviceable materials in specified manners and disposal of unserviceable materials 100 mm dia pipe as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 44 | Dismantling of various Chinaware & CP fittings from the baths/toilets including stacking of serviceable materials in specified manners and disposal of unserviceable as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 45 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry) as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 46 | Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge including carriage of materials within all leads, lifts and heights. 1620 (20 mm OD) pipe |
| 47 | Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge including carriage of materials within all leads, lifts and heights. 2025 (25 mm OD) pipe |
| 48 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. 75 mm dia. (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. |
| 49 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. 110 mm dia. (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. |
| 50 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. . 75 mm dia. |
| 51 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. . 110 mm dia. |
| 52 | Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. . 75 mm dia. |
| 53 | Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. 100 mm dia. |
| 54 | Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc complete (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. 75 mm dia |
| 55 | Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc complete (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. 100 mm dia |
| 56 | Providing and fixing PVC double equal branch ISI marked including fixing with approved adhesive etc complete (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. 75 mm dia |
| 57 | Providing and fixing PVC double equal branch ISI marked including fixing with approved adhesive etc complete (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. 110 mm dia |
| 58 | Providing and fixing PVC collers ISI marked including fixing with approved adhesive etc. complete (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. 75 mm dia. |
| 59 | Providing and fixing PVC collers ISI marked including fixing with approved adhesive etc. complete (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. 110 mm dia. |
| 60 | Providing and fixing PVC floor trap complete (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. 110 mm dia |
| 61 | Providing and fixing brass full way valve with wheel (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. 15 mm dia |
| 62 | Providing and fixing brass full way valve with wheel (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. 20 mm dia |
| 63 | Providing and fixing 15 mm dia nominal bore G.I. Union Tata, Jindal (Hisar) or equivalent make (heavy duty) including cutting and threading the pipe and making long screw etc complete as per the diretion of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 64 | Providing and fixing 20 mm dia nominal bore G.I. Union Tata, Jindal (Hisar) or equivalent make (heavy duty) including cutting and threading the pipe and making long screw etc complete as per the diretion of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 65 | Providing and fixing vitreous china wash down water closet Kerovit make of size 600X360X760mm Cat. No.KB3007 (LEELA) EWC 'S' trap floor mounted Single pice With UF Soft close slim seat cover, Hinges, Duel Flush cistern fitting, fixing accessories and accessories set etc. or equivalent series of Cera/ Amarican standred/Jal/Hindware complete in all respect, water closet ( European Type - WC pan) with integral 'S' Trap-220mm including jointing the trap with soil pipe in cement mortar 1:1 ( one cement, one sand) (with cistern, seat cover and flush fitting) for stallation, testing & commissioning of sanitary fixtures as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights.( snow white) |
| 66 | Providing and fixing vitreous china table/counter top white wash basin of modern design with rectangular shape with tap hole Kerovit make of size 570x420x150mm Cat. No.KB246 (MAX) or equivalent series of Cera/ Amarican standred /Jal /Hindware including cutting holes and making good for stallation, testing & commissioning of sanitary fixtures as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights. |
| 67 | Providing and fixing CP bottel trap for wash basin and sink 32mm dia Kerovit make Cat No. KAB70002 or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights. |
| 68 | Providing and fixing C.P. gratting 100mm for gully Kerovit make Cat No. KA640002 or equivalent series of Cera/ Amarican standred/Jal/Hindware size 125x 125mm , floor or Nahni trap as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights. |
| 69 | Providing and fixing CP brass waste for wash basin sink Kerovit make Cat No. KA870006 or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights. |
| 70 | Providing and fixing CP Towel rail complete with C.P. brackets fixed to wooden pluges with C.P. screws 600mm x 20mm Kerovit make Cat No. KA70001 or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights. |
| 71 | Providing & Fixing C.P. Towel Ring Kerovit make Cat No. KA670005 or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights. |
| 72 | Providing and fixing 5mm beveled edge mirror of superior glass fixed with studs & washers on the wall tiles Kerovit make Cat No. KAJ0390 size 700x500mm or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights. |
| 73 | Providing and fixing C.P. brass single hole was basin mixer Kerovit make Cat No. KB111027 (NUCLEUS) or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights. |
| 74 | Providing and fixing C.P. brass bib tap long body 15mm dia with capstans head Kerovit make Cat No. KB111004 (NUCLEUS) or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights. |
| 75 | Providing and fixing C.P. brass paper holder Kerovit make Cat No. KA930007 or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights. |
| 76 | Providing and fixing 15mm nominal size CP brass angle valve/ Stop Cock with wall flange Kerovit make Cat No.111003 (NUCLEUS) or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights. |
| 77 | Providing and fixing CP brass soap tray fixed with CP brasss brackets fixed to wooden cleats with screws Kerovit make Cat No.KA670004 or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights. |
| 78 | Providing and fixing C.P. hand jet (Health faucet) with necessary fittings nails and screws complete Kerovit make Cat No.KA5800018 or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights. |
| 79 | Providing and fixing C.P. towel rack (Health faucet) Kerovit make Cat No.KA930008 or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights. |
| 80 | Providing and fixing rob hooks Kerovit make Cat No.KA660003 or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights. |
| 81 | Providing and fixing wall mixing faucewt three in one system with overhead shower and 115 mm long bend pipe Kerovit make Cat No.KB111018 (NUCLEUS) or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights. |
| 82 | Providing and fixing C.P. connection pipe with brass unions 45 cms length 15 mm nominal bore Kerovit make Cat No.KA950001 (NUCLEUS) or equivalent series of Cera/ Amarican standred/Jal/Hindware as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights. |
| 83 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights. Please Enable Macros to View BoQ information |
