|
| 1 | A. GROUND FLOORA-1) Supplying all materials, labour, T&P for earth work in excavation in foundation in all kinds of soil with in 50m initial lead and1.50m initial lift including rough dressing and breaking clods to maximum5cm to 7cm in size and laying in layers not exceeding 0.30min depth and as per the direction of EIC. |
| 2 | A-2) Supplying all materials, labour, T&P for filling foundation and plinth with sand well watered and rammed including cost, cost of all labour, carriage, royalty, taxes, T&P etc complete. |
| 3 | A-3) Supplying all materials, labour, T&P and providing Cement Concrete (1:3:6) using 40mm size hard granite C.B. metal approved quality from approved quarry including hoisting laying using concrete mixture and vibrators including cost, carriage, royalty, cost of all labour T.&P. etc complete and as directed by E.I.C. |
| 4 | A-4) Supplying all materials labour T&P and providing Brick work with Fly Ash bricks of 25cm x 12cm x 8cm size in cement mortar (1:6) in Foundation and Plinth including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 5 | A-5) Supplying all materials labour T&P and providing R.C.C. M-25 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, T&P centering shuttering etc complete but excluding cost of reinforcement complete.a) Column base |
| 6 | A-5.-b) Grade Beam |
| 7 | A-5.-c) Lintel |
| 8 | A-5.-d) Chajja |
| 9 | A-5.-e) Column and Roof beam |
| 10 | A-5.-f) Shelve |
| 11 | A-5.-g) Roof Slab |
| 12 | A-5.-f) Stair |
| 13 | A-6) Supplying all materials,labour,T&P for MS reinforcement for RCC work including cutting , bending, binding and tying the grills and placing in position including cost of binding wire 18-20 guage as per specification etc all complete as per direction of E.I.C. |
| 14 | A-7) Supplying all materials labour T&P and providing Brick work with Fly Ash bricks of 25cm x 12cm x 8cm size in cement mortar (1:6) in superstructure including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 15 | A-8) Supplying all materials labour T&P and providing 12mm thick cement plaster (1:6) over brick masonary to the outside smooth surface including cost carriage and royality of all materials etc all comlete as per the direction of EIC. |
| 16 | A-9) Supplying all materials labour T&P and providing 16mm thick cement plaster (1:6) over brick masonary to the inside rough surface including cost carriage and royality of all materials etc all comlete as per the direction of EIC. |
| 17 | A-10) Supplying all materials, labour, T&P and providing 6 mm thick cement plaster (1:4) to RCC surface finished smooth including close chiping and slury treatment including cost, carriage and royalty of all the materials etc all comlete as per the direction of EIC. |
| 18 | A-11) Supplying all materials, labour, T&P for fitting and fixing of vitrified tile (Plain) in floors of size 600mm x 600mm of approved make conformaing to IS : 13755 laid on 20 mm thick cement mortar (1:4) (1 cement :4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of E.I.C. |
| 19 | A-12) Supplying all materials, labour, T&P for fitting and fixing of granite tile (Above 0.40 Sqm) (20mm thick) in floors treads or steps and landing on 20mm thick bed of cement mortar 1:4 (1cement : 4sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost, carriage, royalty & taxes of all material, cost of all labour T&P etc. complete. |
| 20 | A-13) Supplying all materials, labour, T&P for fitting and fixing of Chequred tiles in floors treads or steps and on 20mm thick bed of cement mortar 1:4 (1cement : 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including cost, carriage, royalty & taxes of all materials, cost of all labours T&P etc complete. |
| 21 | A-14) Supplying all materials, labour, T&P for fitting and fixing of Vitrified tiles (size 600mmx600mm) (Plain/ Printed) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete. |
| 22 | A-15) Supplying, fitting, fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Ventilator / Top Hung - 60 - Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames, 75mm x 60mm x 2.25mm for casement window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc. including cost and conveyance of all materials, accessiries, labour charges, materials and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards etc. complete as per direction of the Engineer-In-Charge. |
| 23 | A-16) Supply and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) FENESTA / NCL or equivalent Casement door -60 series duly manufactured using UPVC reinforced profiles of 60mm x 50mm x 2.5mm for outer frames, 102mm x 60mm x 2.25mm for casement Door sash profile and 74mm x 60mm x 2.25mm for millon profile capable of mounting single slazing system , structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 2.0mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick clear WPC board of green plymake duly fixed with EPDM weathered seal resistance accessories like clipping lock system made up aluminium1 noper set of sashesand the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site with 10 years manufactures warranty for discoloration, wraping, mechanical failures, shrinkages, rotting, corrosion etc. with a quality certificate from relevant department of Govt. of India, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work (confrming ASTM D638-14,EN-477-95) (structural requirements profiles are to be got approved by the Engineer-in-Charge of the work before fabrication of the shutter) as per specification and direction of the Engineer-in-Charge., |
| 24 | A-17) Supplying of G.I. Door, Window with grills, Grills, collapsible gates made out of G.I. Angle frame, G.I. Flat, Sheet etc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour T&P, carriage of materials to site etc. complete. |
| 25 | A-18) Labour charges for fitting, fixing M.S./G.I. gates (M.S./G.I. Door, Window with grills, Grills, collapsible gates) as per approved design including cost of all labour, T&P etc. complete. |
| 26 | A-19) Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect. (in all floor) |
| 27 | A-20) Supplying all materials, labour T&P and finishing surface of walls with Cement based wall putty & making smooth to recive painting including cost of scaffolding etc. with cost of all materials, labour T&P etc. complete. |
| 28 | A-21) Supplying all materials, labour T&P and priming 1 coat with wall primer water bond cement primer including all labour, materials, T&P etc. complete. |
| 29 | A-22) Supplying all materials, labour T&P and providing wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete. |
| 30 | A-23) Supplying all materials, labour T&P and finishing to the exposed surfaces of wall with weather coat of any approved shade on new work 2 coats to give an even shade including cost of weather coat all cost of all labours and T&P etc. complete . |
| 31 | A-24) Supplying all materials, labour T&P and painting two coats of enamel paint over a coat of primer to wood/iron work of any approved shade incluiding all taxes and cost of all materials and cost of all labour with T&P required for the work complete. |
| 32 | A-25) Supplying all materials, labour T&P and providing C.C. (1:2:4) with 12mm and down grade C.B. chips approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and including cost, carriage, royalty, cost of all labour T.&P. etc complete and as directed by E.I.C. |
| 33 | A-26) Supplying all materials, labour T&P and filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge for 100 cum |
| 34 | B. FIRST FLOORB-1) Supplying all materials labour T&P and providing R.C.C. M-25 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, T&P centering shuttering etc complete but excluding cost of reinforcement complete.a) Column and Roof beam |
| 35 | B-1-b) Lintel |
| 36 | B-1-c) Chajja |
| 37 | B-1-d) Shelve |
| 38 | B-1-e) Roof Slab |
| 39 | B-1-f) Stair |
| 40 | B-2) Supplying all materials,labour,T&P for MS reinforcement for RCC work including cutting , bending, binding and tying the grills and placing in position including cost of binding wire 18-20 guage as per specification etc all complete as per direction of E.I.C. |
| 41 | B-3) Supplying all materials labour T&P and providing Brick work with Fly Ash bricks of 25cm x 12cm x 8cm size in cement mortar (1:6) in superstructure including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 42 | B-4) Supplying all materials labour T&P and providing 12mm thick cement plaster (1:6) over brick masonary to the outside smooth surface including cost carriage and royality of all materials etc all comlete as per the direction of EIC. |
| 43 | B-5) Supplying all materials labour T&P and providing 16mm thick cement plaster (1:6) over brick masonary to the inside rough surface including cost carriage and royality of all materials etc all comlete as per the direction of EIC. |
| 44 | B-6) Supplying all materials, labour, T&P and providing 6 mm thick cement plaster (1:4) to RCC surface finished smooth including close chiping and slury treatment including cost, carriage and royalty of all the materials etc all comlete as per the direction of EIC. |
| 45 | B-7) Supplying all materials, labour, T&P for fitting and fixing of vitrified tile (Plain) in floors of size 600mm x 600mm of approved make conformaing to IS : 13755 laid on 20 mm thick cement mortar (1:4) (1 cement :4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of E.I.C. |
| 46 | B-8) Supplying all materials, labour, T&P for fitting and fixing of granite tile (Above 0.40 Sqm) (20mm thick) in floors treads or steps and landing on 20mm thick bed of cement mortar 1:4 (1cement : 4sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost, carriage, royalty & taxes of all material, cost of all labour T&P etc. complete. |
| 47 | B-9) Supplying all materials, labour, T&P for fitting and fixing of Vitrified tiles (size 600mmx600mm) (Plain/ Printed) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete. |
| 48 | B-10) Supplying, fitting, fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Ventilator / Top Hung - 60 - Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames, 75mm x 60mm x 2.25mm for casement window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc. including cost and conveyance of all materials, accessiries, labour charges, materials and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards etc. complete as per direction of the Engineer-In-Charge. |
| 49 | B-11) Supply and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) FENESTA / NCL or equivalent Casement door -60 series duly manufactured using UPVC reinforced profiles of 60mm x 50mm x 2.5mm for outer frames, 102mm x 60mm x 2.25mm for casement Door sash profile and 74mm x 60mm x 2.25mm for millon profile capable of mounting single slazing system , structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 2.0mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick clear WPC board of green plymake duly fixed with EPDM weathered seal resistance accessories like clipping lock system made up aluminium1 noper set of sashesand the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site with 10 years manufactures warranty for discoloration, wraping, mechanical failures, shrinkages, rotting, corrosion etc. with a quality certificate from relevant department of Govt. of India, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work (confrming ASTM D638-14,EN-477-95) (structural requirements profiles are to be got approved by the Engineer-in-Charge of the work before fabrication of the shutter) as per specification and direction of the Engineer-in-Charge., |
| 50 | B-12) Supplying all materials labour T&P and providing 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm size hard crusher broken granite chips on new work including watering curing cost of all materials, water-proofing compounds, T.& P. required for the works etc complete. |
| 51 | B-13) Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect. (in all floor) |
| 52 | B-14) Supplying all materials, labour T&P and finishing surface of walls with Cement based wall putty & making smooth to recive painting including cost of scaffolding etc. with cost of all materials, labour T&P etc. complete. |
| 53 | B-15) Supplying all materials, labour T&P and priming 1 coat with wall primer water bond cement primer including all labour, materials, T&P etc. complete. (a ) Inside wall and Celling |
| 54 | B-15-b) Outside wall |
| 55 | B-16) Supplying all materials, labour T&P and providing wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete. |
| 56 | B-17) Supplying all materials, labour T&P and finishing to the exposed surfaces of wall with weather coat of any approved shade on new work 2 coats to give an even shade including cost of weather coat all cost of all labours and T&P etc. complete . |
| 57 | C. SECOND FLOORC-1) Supplying all materials labour T&P and providing R.C.C. M-25 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, T&P centering shuttering etc complete but excluding cost of reinforcement complete.a) Column and Roof beam |
| 58 | C-1-b) Lintel |
| 59 | C-1-c) Chajja |
| 60 | C-1-D) Roof Slab |
| 61 | C-2) Supplying all materials,labour,T&P for MS reinforcement for RCC work including cutting , bending, binding and tying the grills and placing in position including cost of binding wire 18-20 guage as per specification etc all complete as per direction of E.I.C. |
| 62 | C-3) Supplying all materials labour T&P and providing Brick work with Fly Ash bricks of 25cm x 12cm x 8cm size in cement mortar (1:6) in superstructure including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 63 | C-4) Supplying all materials labour T&P and providing 12mm thick cement plaster (1:6) over brick masonary to the outside smooth surface including cost carriage and royality of all materials etc all comlete as per the direction of EIC. |
| 64 | C-5) Supplying all materials labour T&P and providing 16mm thick cement plaster (1:6) over brick masonary to the inside rough surface including cost carriage and royality of all materials etc all comlete as per the direction of EIC. |
| 65 | C-6) Supplying all materials, labour, T&P and providing 6 mm thick cement plaster (1:4) to RCC surface finished smooth including close chiping and slury treatment including cost, carriage and royalty of all the materials etc all comlete as per the direction of EIC. |
| 66 | C-7) Supply and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) FENESTA / NCL or equivalent Casement door -60 series duly manufactured using UPVC reinforced profiles of 60mm x 50mm x 2.5mm for outer frames, 102mm x 60mm x 2.25mm for casement Door sash profile and 74mm x 60mm x 2.25mm for millon profile capable of mounting single slazing system , structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 2.0mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick clear WPC board of green plymake duly fixed with EPDM weathered seal resistance accessories like clipping lock system made up aluminium1 noper set of sashesand the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site with 10 years manufactures warranty for discoloration, wraping, mechanical failures, shrinkages, rotting, corrosion etc. with a quality certificate from relevant department of Govt. of India, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work (confrming ASTM D638-14,EN-477-95) (structural requirements profiles are to be got approved by the Engineer-in-Charge of the work before fabrication of the shutter) as per specification and direction of the Engineer-in-Charge., |
| 67 | C-8) Supplying all materials labour T&P and providing 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm size hard crusher broken granite chips on new work including watering curing cost of all materials, water-proofing compounds, T.& P. required for the works etc complete. |
| 68 | C-9) Supplying all materials, labour T&P and finishing surface of walls with Cement based wall putty & making smooth to recive painting including cost of scaffolding etc. with cost of all materials, labour T&P etc. complete. |
| 69 | C-10) Supplying all materials, labour T&P and priming 1 coat with wall primer water bond cement primer including all labour, materials, T&P etc. complete. (a ) Inside wall and Celling |
| 70 | C-10-b) Outside wall |
| 71 | C-11) Supplying all materials, labour T&P and providing wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete. |
| 72 | C-12) Supplying all materials, labour T&P and finishing to the exposed surfaces of wall with weather coat of any approved shade on new work 2 coats to give an even shade including cost of weather coat all cost of all labours and T&P etc. complete . |
| 73 | D. INTERNAL ELECTRIFICATION WORKD-1) Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 6Amp ,250V Modular switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, Metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/Great White/HPL) |
| 74 | D-2) Supply and fixing of 6Amp plug with 6Amp switch on existing board (Modular type) a)Plug Point |
| 75 | D-3) Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches connection (make-Anchor/ Legrand /Roma/Great White/HPL) a) 15 Amp. Plug point |
| 76 | D-4) Supply and drawing of following size PVC insulated single core multistrand copper conductor in existing surface/recessed/STEEL / conduit as required.(a) 2 X 4sqmm Sch. Sl. No. 64 (e). |
| 77 | D-4-b) 2 X 2.5sqmm +1 x 1.5sqmm for inverter and sub main line of Sch. Sl. No. 64 (g). |
| 78 | D-4-c) 2 X 6mm2 power supply line for Meter Board Sch. Sl. No. 64 (e). |
| 79 | D-5) Supply and fixing of Modular metal box of following size (nominal size) on surface/Recess with suitable size of Modular cover in front including cutting the wall and making good the same in cases of recessed conduit as required (Modular box + cover+ fixing + Labour cess) (Sch. Sl. No.56)a) 2 Modular Board |
| 80 | D-5-b) 3 Modular Board |
| 81 | D-5-c) 4 Modular Board |
| 82 | D-5-d) 8 Modular Board |
| 83 | D-5-b) 12 Modular Board |
| 84 | D-6) Supply ,installation, testing and commissioning of main switches (IS 13940 part-3/1993 ) of following capacity on existing surface/wall mounting and completer with HRC fuse links, interconnections, earthing (Make-Seimens/ HPL/ Anchor/ L&T/Havells/C&S/RK)a) 63Amp ICDP main switches with MS board (Sh Sl No. 13 (b)) |
| 85 | D-7) Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.)a) 8way, single door Sl .8(c) |
| 86 | D-8) Supply and fixing of 5Amp to 32A rating 240V \\"B\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (make-HPL/ Havells/ Legrand /L&T/C&S) Sl .9a) Single pole (SP) Sl .9 ( a ) |
| 87 | D-8-b) Single pole and Neutral (SP&N) Sl .9 ( b ) |
| 88 | D-9) Supplying and fixing of 15W circular LED TL fitting (Make-Havells /Philips/Bajaj) . Sch. Sl. No. 70.a) 15W circular LED TL fitting |
| 89 | D-10) Supply and fixing of fan (make-Usha/Orient/V-Guard/Khaitan/Havells/ Crompton/ Almonard)a) A.C Ceiling fan 48/56\\" Orient PSPO cool Breeze/or equivalent make Sl .20(b) |
| 90 | D-10-b) Exhaust fan 10\\"/12\\" size Sch. Sl .20(d) |
| 91 | D-11) Supply and fixing of 60W LED street light fitting(Make-Havells /Philips/Bajaj)A) 60W LED street light |
| 92 | D-12) Supply and fixing of superior type call bell of ISI marked, on 6\\" X 4\\"conforming to IS-2268/1994 and bell push of ISI marked , conforming to IS-1293/ 1988 (make-Cona/ Anchor) a) Remote call bell with battery Sl .5 ( c ) |
| 93 | D-13) Supply and fixing Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required a) Standard earthing as per Govt. spcn. |
| 94 | D-14) Supply and fixing of copper plate earthing( 600 X 600 X 3.15mm )with running copper flat 25 X 5mm from copper plate to funnel of 40mm dia G.I pipe including all accessories a) copper plate earthing |
| 95 | E. WATER SUPPLY & SANITARY INSTALLATION WORKE-1) Supplying ,fitting & fixing of Orissa pan ,100mm.dia. PVC,P-trap & jointing materials etc all complete as per the direction of Engineer-in-charge. |
| 96 | E-2) Supplying ,fitting & fixing of S-tarp commode with matching seat cover & jointing materials etc all complete as per the direction of Engineer-in-charge. |
| 97 | E-3) Supplying all materials, labour, T&P and cutting grooves in pucca floor or Brick wall and mending good the damages for taking G.I. pipes complete as per P.H. specification. |
| 98 | E-4) Providing and fixing to wall, ceiling and floor the pipe fittings of following nominal bore with clamps; including making good the wall ceiling and floor, all complete in ground floor (including the cost of materials ) as per the PHE specification and direction of the Engineer-in-charge. a) 25mm dia C.P.V.C. pipe (SDR-13.5) |
| 99 | E-4-b) 25mm dia UPVC-ASTM Standard (Sch-80) |
| 100 | E-4-c) 40mm dia UPVC-ASTM Standard (Sch-80) |
| 101 | E-5) Providing, fixing, fitting of following Brass / Gun metal/Chromium plated fitting of approved make (conforming to respective I.S. specifications ) including the jointing materials, if any all complete as per the PHE specification and the direction of the Engineer-in-charge. (Plaza/Amber/Delux). Gents Toilet & Ladies Toileta) 20mm dia C.P. concealed stop cock |
| 102 | E-5-b)125mm dia C.P. grating |
| 103 | E-5-c) C.P. soap disc. |
| 104 | E-5-d) 15mm dia C.P. long body Bib cock |
| 105 | E-5-e) 15mm dia C.P. Short body Bib cock |
| 106 | E-5-f) 600mm x 20mm C.P. Towel rail |
| 107 | E-5-g) C.P. Towel ring |
| 108 | E-5-h) 500mm x 125mm C.P. glass shelf with glass |
| 109 | E-5-i) Overhead shower with ball bearing arrangement with arm. |
| 110 | E-5-j) 15mm dia c.p.angular stop cock |
| 111 | E-5-k) 15mm dia c.p. pillar cock |
| 112 | E-5-l) 15mmx600mm PVC connection pipe |
| 113 | E-5-m) C.P. waste. (32mm -5\\" long) |
| 114 | E-5-n) 32mmx800mm long PVC waste pipe |
| 115 | E-5-o) Frammed Mirrior |
| 116 | E-5-p) C.P. extension piece-2\\" (15mm x2\\") |
| 117 | E-5-q) C.P. flange(Big) |
| 118 | E-5-r) 15 mm CP 2 in 1 Bib cock |
| 119 | E-5-s) CP Health Foucet with 1.0 mtr PVC Tube |
| 120 | E-5-t) 15mm dia C.P Sink Cock |
| 121 | E-5-u) 25mm x 15mm dia Brass MTA |
| 122 | E-5-v) 25mm UPVC-ASTM Ball Valve |
| 123 | E-5-w) 40mm UPVC-ASTM Ball Valve |
| 124 | E-5-x) 25mm dia PVC Ball Cock |
| 125 | E-6) Supplying all materials,labour and T&P for fixing 10 ltr capacity PVC low level cistern with a pair of PVC brackets complete with fitting such as siphonic arrangement,15mm. nominal size brass/PVC ball valve with polythene float chromium plated brass handle, unions and couplings for connection with inlet, outlet and over flow pipes, 32mm.dia. PVC long flush bend including cutting holes and making good the same and connecting the flush bend with cistern and closet and the inlet pipe with supply main etc. all complete as per specification. |
| 126 | E-7) Supplying all materials,labour and T&P for fixing wash basins with pedestal by making hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification. |
| 127 | E-8) Supplying all materials,labour and T&P for Fixing wash kitchen sink conforming to IS 2556 : Part 5-1994 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification.a) 24\\"x 18\\" x10\\"STEEL sink single bowl (Mousumi ) |
| 128 | E-9) RCC beam staging with required brick work, Cement plaster & Roof slab suitable for installation of 1000 ltr. capacity PVC Tank including cost of materials, with all taxes, royalties, transportation, hoisting, and pipe connection to the tanks and its testing, on the ground floor with labours, T&P etc. all complete as per the direction of Engineer-in-charge. (2ndFloor) a) 1000 Ltr capacity PVC Tank- |
| 129 | E-10) Supplying all materials, labour and T&P for construction of 1.20mtr.dia.x1.50mtr. Deep soak-way pit with dry brick walling up to 1.10mtr. height and brick work with cement mortar (1:6) for 0.45mtr. height of wall at top,cement plaster (1:3) inside and outside,inside filled with dry brick khoa of 50mm.to 100mm.size to a height of 2.00mtr.from bottom, covered by means of 40mm.thick R.C.C. perforated slab,50mm.thick R.C.C.well cover in pieces fitted with iron rings including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing. |
| 130 | E-11) Supplying all materials labour & T&P for constructing of brick masonry gully trap chambers earth work in excavation in all kinds of soil, 250mm thick fly ash work in C.M. (1:5) with fly ash. bricks having crushing strength not less than 75kg/cm2, 12mm thick cement plaster in C.M. (1:3) for both inside and outside of brick masonry work with neat cement punning on Top and inside surface area including benching and channelling work with C.C. (1:2:4) with 12mm Hard granite chips of requisite quantity and then plastering with C.M. (1:3) over it and then smooth finish with neat cement punning including cost of SFRC cover slab etc. all complete as per approved P.H.E.D. specification and direction of Engineer-in-charge. |
| 131 | E-12) Supplying all materials, labour T&P for laying of SWR PVC sewer lines with all round concrete of 1:4:8 with 0.3 mtr dia encasing including earth work excavation in all kinds of soil and refilling the trenches etc all complete inclusive of cost of SWR PVC pipe etc all complete as per the direction of Engineer-in-charge. (Astral/Ashirvad/Supreme)a) 110mm dia PVC SWR Pipe (Standard Beddings for C-2 Sewer) |
| 132 | E-13) Supplying all labour T&P materials for fitting and fixing of following dia PVC SWR pipe and fittings etc. all complete as per the P.H. spectification including cost of pipe and fittings. a) 110mm dia P.V.C. SWR S/S Pipe (ISI type-A) |
| 133 | E-13-b) 110mm dia PVC SWR P-trap . |
| 134 | E-13-c) 110mm dia PVC SWR Plain bend . |
| 135 | E-13-d) 110mm dia PVC SWR Door bend . |
| 136 | E-13-e) 110 x 110 x 110mm dia PVC SWR Tee |
| 137 | E-13-f) 110 mm dia P.V.C. SWR Cowl |
| 138 | E-13-g) 110mm dia P.V.C. SWR S/J with door |
| 139 | E-13-h) 110mm diaP.V.C. SWR.pipe clip Please Enable Macros to View BoQ information |
