|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE 881 EWS C/O 56 APO NAME OF WORK: COMPREHENSIVE MAINT FOR CERTAIN BLDGS IN VARIOUS UNITS AT NATU AND SHEKLU IN THE AOR OF AGE B/R II UNDER GE 881 EWS. Contract No : GE/PNH-105/2025-26 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness(below or above ground level) all as specified and directed. |
| 3 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.complete all as specified and as directed. |
| 4 | Dismantling water tanks and removing to store of capacity exc 250 & n.exc 500 ltrs complete all as specified and as directed.. |
| 5 | Dismantling water tanks and removing to store of capacity exc 500 & n.exc 1000ltrs complete all as specified and as directed. |
| 6 | Rotational moulded PVC water tanks, minimuim double layer, ISI marked, of 500 Ltrs capacity, cylindrical vertical with threaded closed top and cover, hoisted and fixed in position complete all as specified and as directed. |
| 7 | Rotational moulded PVC water tanks, minimuim double layer, ISI marked, of 1000 Ltrs capacity, cylindrical vertical with threaded closed top and cover, hoisted and fixed in position complete all as specified and as directed. |
| 8 | Ball brass valve, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete of 20 mm bore complete all as specified and as directed. |
| 9 | Cement concrete, type E-2 ,1:5:10 ( using 40 mm graded stone aggregate) in foundations,filling and mass concrete as in sunken floor all as complete all as specified and directed |
| 10 | Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu m/ per sq m all as specified and directed. |
| 11 | Polythene film, 150 micron thick, laid over and including a coat of bitumen primer @ 0.40 ltr per sq.m including over laps complete all as specified and as directed. |
| 12 | Cement concrete 75mm thick type D- 2,1:4:8(using 40mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 13 | 25mm thick (minimum thickness) cement concrete type B-1,1:2:4 (using 20mm graded stone aggregates) as leveling course to receive floor finishes all as specified and directed. |
| 14 | 75mm bore PVC (SWR) pipes, type B, single socketed, in any length with rubber ring joints, laid in trenches or in floors fixed in repair, finished even and fair complete all as specified and directed. |
| 15 | 75mm bore PVC (SWR) bends any radius fixed in floor in repair, complete all as specified and as directed. |
| 16 | 75mm bore PVC (SWR) junction single, (Single T) equal or unequal fixed in repair complete all as specified and as directed. |
| 17 | 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed. |
| 18 | 110 mm bore PVC (SWR) pipes, type B, single socketed, in any length with rubber ring joints, fixed to wall with GI/Alu clamps fixed in repair complete all as specified and directed. |
| 19 | 110 mm bore PVC (SWR) bends any radius fixed in repair complete all as specified and directed. |
| 20 | 110mm bore PVC (SWR) vent cowl fixed in repair complete all as specified and directed. |
| 21 | Non skid joint free Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement, laid over and including 15 mm thick cement screed bed in cement mortar1:4 complete all as specified and directed. |
| 22 | Ceramic colored tiles of size 450x350x7 mm /350x250x7mm thick as in vertical surfaces such as skirting, dados & step etc, set and jointed in neat cement slurry and pointed in white or coloured cement including 10mm thick backing layer of plaster in CM 1:4 and complete all as specified and directed. |
| 23 | Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick cement screed bed in cement mortar1:4 complete all as specified and directed. |
| 24 | Vitrified Ceramic tiles light shade10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick cement plaster as in backing coat in CM 1:4 complete all as specified and directed. |
| 25 | Dark shed/double charge vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick cement screed bed in cement mortar1:4 complete all as specified and directed. |
| 26 | Dark shed/double charge vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in skirting/dados set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster as in backing coat in CM 1:4 complete all as specified and directed. |
| 27 | Machine cut kota stone slab in flooring 18 -20mm thick laid over and including 20mm thick cement screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 28 | Machine cut kota stone slab 18-20mm thick in riser or steps, skirting, dado and pillar laid over and including10 mm thick screed bed cement screed/plaster in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 29 | 20mm thick Granite (of any type) as in floor/platforms/counters etc machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment over screed bed in CM 1:4 and to match the shade of granite stone including grinding, polishing, rounding of edges complete all as specified and directed. |
| 30 | 20mm thick Granite (of any type) machine cut, in skirting/ dado laid over cement screedand jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone over 15mm thick cement plaster in CM 1:4 including grinding, polishing, rounding of edges complete all as specified and directed. |
| 31 | Supply & fixed in repair,Vitreous china premium/ 1st quality wash down water closet floor mounted EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc) including built in china ware flushing cistern of 10 ltrs capacity, soft closing seat cover with hinging device, PVC outlet pipe and necessary solvent etc complete in repair all as specified and directed. |
| 32 | Supply & fixed in repair, Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern pipe) including fixing bolts, flushing pipe etc complete all as specified and directed. |
| 33 | Supply & fixed in repair,Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern) including flushing pipe and suitable PVC traps complete all as specified and directed. |
| 34 | Supply & fixed in repair, Vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe (excl flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 35 | PVC connections 15mm size with brass nuts of length 600mm fixed in repair all as specified and directed. |
| 36 | Supply & fixed in repairs PVC waste pipe with union, flexible suitable for wash hand basin or urinal, 32 mm dia. |
| 37 | Supply and fix in repair vitreous China wash basin, white, flat back, size 550x400mm or bowl type counter top excluding taps but including brackets, 32mm waste coupling CP and PVC waste pipe complete all as specified and directed. |
| 38 | Supply and fix in repair vitreous China Pedestal for wash hand basin complete all as specified and directed |
| 39 | PVC cabinet mirror of size 600x360mm and depth as per manufacturer fixed in repair all as specified and directed. Make : Prayag, Plantex, Aquavive, Bath Queen |
| 40 | Fiber glass wash room corners set of three pieces of size 220mm, 175mm and 125mm fixed to wall in repair all as specified and directed. Make : Plantex, Prayag, Bath Queen |
| 41 | 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated screws and cup washers fixed in repair all as specified and directed. |
| 42 | Bevelled edge mirror of selected quality glass with 2nd Class Hard Wood Beading of size 25x 10mm fixed to wall with the help of SS Screw including drilling holes etc complete fixed in repair all as specified and directed. |
| 43 | Aluminium anodised tubular towel rail 20 mm dia, 'D' type 60 cm long between flanges fixed in repair to wall all as specified and directed.. |
| 44 | 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated,fancy type long body screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed in repair all as specified and directed. |
| 45 | Bib tap 15 mm bore, Brass CP, fancy type (long shank). with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair complete all as specified. |
| 46 | Bib tap 15 mm bore,two way, brass CP, fancy type (long shank). with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair complete all as specified. |
| 47 | 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed in repair complete all as specified and directed. |
| 48 | 15mm bore stop valve/angle valve consealed cost copper alloy fancy type Chromium plated with long shank and cup (concealed type) , screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe fixed in repair completed all as specified and directed. |
| 49 | Supply & fixed in repairs Angle valve cast copper alloy, high pressure with crutch or butterfly handle, 15 mm bore complete all as specified and directed. |
| 50 | Health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and wall hook including making connections and fixed in position completein all respect fixed in repair complete all as specified and directed. |
| 51 | Chromium plated shower roses with or without swivel joints, of size 200mm x 200mm, including Shower arm 15 mm size, 195mm long with bend of 45degree with flangeand fixing to steel pipe or union in repair complete all as specified and directed. |
| 52 | Supply & fixed in repairs Grating doom 100 mm dia with waste hole of PTMT (minimum weight - 40 gms) complete all as specified and directed. |
| 53 | Supply & fixed in repair, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle (incl brackets & flush pipe PVC 32 mm dia) capacity of 10 Litres complete all as specified and directed. |
| 54 | 20mm OD 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc including taking down of existing pipes of any description complete all as specified and directed. |
| 55 | 25 mm OD 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls,ceilings or in floors etc including taking down of existing pipes of any description complete all as specified and directed. |
| 56 | 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair complete all as specified and directed |
| 57 | S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipeand fixed. With 15mm bore complete all as specified and directed. |
| 58 | S&F and repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipeand fixed. With 20mm bore complete all as specified and directed. |
| 59 | Taking down chowkat or frame exc 1.5 sqm but n.exc 4 sqm with shutters (without taking taking off shutters from the frame) complete all as specified and directed. |
| 60 | Solid PVC door frame of size 50 X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in opening as per specifications and drawing complete all as specified and directed. |
| 61 | Factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; Panelling of plain colur PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, Supplied and Fixed in the frame at site as per specification and drawings complete all as specified and directed. |
| 62 | Taking down chowkat or frame n.exc 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 63 | Taking down shutters of any description exc 1 sqm but n exc 2 sq. m each complete all as specified and directed. |
| 64 | Factory made 35 mm thick Flush shutters, solid core, construction, with block board core and plywood face panels, commercial type on both sides with particle board core all as specified and as directed. |
| 65 | Factory made 2nd class hard wood, 30 mm thick, glazed and skeleton shutter, divided into square, with plain, chamfered or rounded mitered and rebated sash bars, any number of panels, prepared to receive glass, gauge etc. edges of frames chamfered or rounded, fitted with cut and mitered beads for securing glass etc. size of members as specified in SSR Part I clause 8.24 (b) kiln seasoned and chemically pressure treated complete, all as specified. |
| 66 | Description all as per item no 64 above but without sash bar as in window/ventilators. |
| 67 | 300mm long alluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or xtruded section and fixing bolts and sliding of extruded section complete all as specified and directed.. |
| 68 | 150mm size MS anodised door handles.complete all as specified and as directed. |
| 69 | 150mm long MS barrel tower bolts complete all as specified and as directed. |
| 70 | 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed.. |
| 71 | 100mm long aluminum anodised barrel tower bolts complete all as specified and as directed. |
| 72 | 75 mm long mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed.. |
| 73 | 100 mm long aluminium handles, cast type, anodised and fixed complete all as specified and directed.. |
| 74 | 300 mm, mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed.. |
| 75 | Plain, solid, 2nd class hard wood straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joint etc complete all as specified and directed.. |
| 76 | Preparation of new wooden or wood based surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.. |
| 77 | Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 78 | Anodised aluminium door shutters,aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, mortise lock, 5.5mm thick tinted glass , hinges, anodised aluminum snap beading screws etc. complete all as specified and directed |
| 79 | Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing ,anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (2 nos.). SS hinges, 100mm long (3 nos) suitable handle (1 no.) complete all as specified and directed |
| 80 | Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire stapple fixed in repair in any types of door and windows all as specified and directed. |
| 81 | 5.5mm thick tinted glass, fixed with snap beading, rubber gasket etc. area of each pane exc. 0.50 sqm fixed complete all as specified and as directed. |
| 82 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including 5.50mm thick tinted glass complete and necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 83 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, fixed in repair all complete as per requirement and direction of Engineerin- charge. |
| 84 | Door closer hydraulically regulated, designation No-3 universal type, aluminium (extruded section body), suitable for door shutter of 851 to 1000mm in width and weight between 61 to 80 Kg and fixed in repair complete all as specified and directed. |
| 85 | Floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete fixed in repair all as specified and as directed. |
| 86 | Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed in repair |
| 87 | Dismantling of wall and ceiling boards any thickness including cover cover fillets complete all as specified and directed. |
| 88 | Exposed metal frame ceiling 600x600mm with 4.00mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in and including 605 mm x 605mm GI grid including 4mm dia GI wire of required length fixed in RCC Roof/Truss etc with 40x3mm size 60mm long GI flat and expansion hold fastern of minimum 12.50mm dia complete all as specified and directed. |
| 89 | 5-6mm thick hollow insulated PVC coloured wall panelling including lining and necessary cleats, screws, bedding etc complete fixed to wall complete all as specified and directed. |
| 90 | 18mm thick prelaminated both side with decorative choice laminations particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 91 | Taking down cement plaster on wall of any desription including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 92 | Rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement complete all as specified and directed. |
| 93 | 15mm thick plaster in cement mortar (1:4) rendering on fair faces of brick work mixed with liqued water proofing compound as per manufacturer instructions, finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 94 | Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth all as specified and directed |
| 95 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification, Two or more coats on new work including preparation of surfaces complete all as specified and directed. |
| 96 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. One or more coats on old surfaces including preparation of old surfaces complete |
| 97 | Preparation of new plastered surface on wall, applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ .90 ltr/10 sqm over new surfaces in painting on walls in camouflage pattern with combination of minimum five colours as approved by GE complete all as specified and as directed. |
| 98 | Preparation of old decorted surface on wall and applying one or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ .90 ltr/10 sqm over new surfaces in painting on walls in camouflage pattern with combination of minimum five colours as approved by GE complete all as specified and as directed. |
| 99 | Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and Precast concrete articles, complete all as specified and directed. |
| 100 | Brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed. |
| 101 | Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 102 | Walling of random rubble, brought upto course, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed. |
| 103 | Description all as per item No 101 above but except stone. |
| 104 | 2mm thick Linoleum, plain/printed coloured, laid with approved adhessive in floors includingstretching, cutting and fitting complete as in repair all as specified and directed |
| 105 | Stainless steel sink, 1.0 mm thick for kitchen or lab, with plug, waste pipe,waste coupling, washers, incl cantilever cast iron brackets, connecting union etc overall size 495 x 420 mm with bowl size 410 x 330 x 160 mm fixed in repair all as specified and directed. |
| 106 | Kitchen utensils dish rack of 07 layers made of stainless steel of size 765mm length, 910mm ht and 250mm depth fixed on wall with SS screws fixed in repair all as specified and directed. Make : Maharaja Steel, Winstar steel, Kuber industries |
| 107 | PVC door guard gap filler for door bottom seal strip to reduce door dust and to protect from insects fixed in reapir in wooden or aluminium or PVC doors etc complete all as specified and directed |
| 108 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed. |
| 109 | Rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantry, rails, fasteing, heavy bracket framing (Beam, tee, angle, chanel or flat section), including distance pieces, cleats etc. confirmig to Fe - 410- W including cutting, welding & necessary fittings such as nut bolt, plate complete all as specified and directed. |
| 110 | 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap,fixed with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275. including dismantling of roof sheeting of any description all as specified and directed. |
| 111 | 0.63mm Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings fixed with L-type or J-type or cranked hook bolts including dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed. |
| 112 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including taking down of roof sheeting of any type all as specified and directed. |
| 113 | Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including taking down of roof sheeting of any type all as specified and directed. |
| 114 | Second class hard-wood clean swan timber framed in scantlings icluding fevicol and one coat of hot bitumen on the surfaces 40 sq. cm and over in section, in any position as in framed work all as specified and directed. |
| 115 | Two coats of synthetic enamel paint on steel surface over a coat of red oxide primer including preparation of new surfaces of any description and position all as specified and directed. |
| 116 | Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing & fixing new one complete all as specified and directed. |
| 117 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 118 | Dismantling timber scantling over 40 sq cm in section in any position in framed work in fillets, rails, posts, rafters,purlins, etc.complete all as specified and directed. |
| 119 | 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
