|
| 1 | Supply of the following items complete with all accessories, nuts, bolts etc. |
| 2 | HTLS Conductor (equivalent to Panther Conductor) |
| 3 | 132 KV 120 KN Long rod porcelain Insulator |
| 4 | 132 KV 90 KN long rod porcelain Insulator |
| 5 | Single suspension hardware |
| 6 | Double suspension hardware |
| 7 | Single suspension pilot insulator |
| 8 | Single tension hardware |
| 9 | Double tension hardware |
| 10 | Dead End Clamps |
| 11 | Jumper socket |
| 12 | Vibration Damper |
| 13 | Supply of Current Transformers alongwith hardware fittings and clamps & connectors |
| 14 | 132kV Single Phase Multicore CT (1000-800-400/1-1-1-1-1) ( 3 Nos for Salakati & 3 Nos for Kokrajhar) |
| 15 | Supply of the following items complete with all accessories, nuts, bolts etc. |
| 16 | HTLS Conductor (equivalent to Panther Conductor) |
| 17 | 132 KV 120 KN Long rod porcelain Insulator |
| 18 | 132 KV 90 KN long rod porcelain Insulator |
| 19 | Single suspension hardware |
| 20 | Double suspension hardware |
| 21 | Single suspension pilot insulator |
| 22 | Single tension hardware |
| 23 | Double tension hardware |
| 24 | Dead End Clamps |
| 25 | Jumper socket |
| 26 | Vibration Damper |
| 27 | Supply of Current Transformers alongwith hardware fittings and clamps & connectors |
| 28 | 132kV Single Phase Multicore CT (1000-800-400/1-1-1-1-1) ( 3 Nos for Salakati & 3 Nos for Kokrajhar) |
| 29 | Preliminary survey, detail survey and profiling of existing lines using Theodilite/gps/total station etc. including measurement of vertical clearance, verification of statutory electrical clearance etc. |
| 30 | Paving, stringing, tensioning, clamping, jointing etc. of HTLS conductor with non metallic core using tension puller machine as per specification requirements in all necessary hardware and accessories i.e. fittings, armour rods, vibration dampers etc. |
| 31 | Dismantling of the existing conductor of the transmission line, re rolling on empy drums, removing of the hardware fittings, insulators and accessories, loading and unloading, transportation to the AEGCL store |
| 32 | Dismantling of existing clamp,connectors and accessories from Gantry to the Bus Bar at the terminal bays of both the substation and reconnection with the HTLS compatible connectors and clamps, both supply of materials and erection in all respect. |
| 33 | Erection, Testing & Commissioning of Current Transformers including laying & termination of LT power and control cables as required Please Enable Macros to View BoQ information |
