Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Proscenium: Providing, fitting & fixing side and top proscenium by m.s frame work made of ms tube of section of 25mm X 25mm with a grid structure of 450mm X 450mm c/c. The front fascia of the proscenium to be covered with 9mm BWP ply and back side of the grid structure to be covered with 9mm BWP ply . Finally the front facia of the proscenium to be covered with 1mm thick laminate finish. Approved Make: Custom |
| 2 | Stage Fascia: Supplying and providing Stage fasia up to the height of wooden stage floor level from the floor level of the auditorium by a framework made of 25mm x 25mm m.s tube. The frame work to be covered by 9mm thick ply (BWP grade) with nails & adhesive and 1mm thick laminate pasted on 9mm ply with adhesive in a decorative way. The bottom edge of the fascia to be covered with polished teak wood skirting of size 25mm x 08mm and top edge of the facia will be covered with 50mm x 25mm angular moulded wooden bit complete with approved colour. Approved Make: Custom |
| 3 | Wooden Podium:Wooden Podium made of 19mm BWP ply and 1mm thick laminated pasted on the 19mmply complete with necessary electrical, sound wiring for Gooseneck mic. Approved Make: Custom |
| 4 | Stage Flooring: Arrangement of Stage floor by providing, fitting and fixing of runners of size 50mm x 40mm with 600mm centre of approved quality Mild steel will be fixed on R.C.C gride at a hight of 450mm from auditorium GL with M. S. clamps and nuts bolts. Leveling is to be done with wooden blocks to provide passage for cabling for sound & stage light system(Rate for PVC conduting is incusive in Electrical /sound items), 3 mm thk neoprin rubber over the grid followed by 19mm thick BWR ply to be fixed on the above runner with screws and nails. teak wood plank of size 12(±)mm thick 100mm (W) X 1200mm (L)Teak wood plank will be fixed on the soild ply with necessary fixing arrangement and finishing the entire wooden floor with polish. Approved Make: Custom |
| 5 | Chair: Auto Tip up Chair with arms having cushion on both seat & back. Both Seat & Back made of PU moulded foam of approved colour with proper adhesive and stitching complete with M.S. base plate with required holes for grouting including SS/Brass plates for seat numbers in all chairs and aisle marking with footlights complete with lamp, wires etc. in all aisle chairs. Approved Make: CVG/ Innovative/ Pen Worker seating |
| 6 | Carpet: Apply and Supply of broadloom carpet of ROSETTA , 100% PA6 Cut Pile, Chromojet Printed, Height 7 mm (± 1 mm),Total Height 9 mm (± 1 mm),Stitch / 10 cm 37-39 (± 2% ), Pile Weight Net less Than 800 GSM (± 5% ), Total Weight 1791 GSM (± 5% ), Secondry Felt Backing, Gauge 1/8 Cut Pile, Latex Natural Rubber, Color fastness to LightTest Method: AATCC 16 (20 AFU) ≥ 4.0 at 80 Hours , Static Electricity Test Method: AATCC 134 Less than 3.5 KV, Hexapod test Method: ASTM D 5252 ≥ 4, Flammability (Radiant Panel) Test Method: ASTM E 648 ≥ 0.45 (Class I) , complete as per drawing , specifications of the architect. The carpet and Underlay (min 6 mm) will be installed with standard Fevicol/Dunlop Adhesives.The flooring to be installed as per the manufacture's specification and to be installed by its authorized agency or as Approved , with minimum 5 Years warranty from Principal for any manufacturing defects. Approved Make: Rosetta, Radiant, Quadrotte |
| 7 | Stage False ceiling: Supply & fixing suspended ceiling which includes G. I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall / partition with the help of nylon sleeves and screws, at 600mm centres. Then suspending G. I. intermediate channels of size of size 45mm (0.9mm thick with two flanges of 15mm each) from the truss / RCC roof at 1220mm centres with M.S. hanger as per requirement with G.I cleat etc. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 600mm centres.Providing and Fixing 15 mm thick tiles made of Wood Fibre cement composites with black colours of size 595x595mm/595X1195mm. highly recommend for ceiling. Has excellent noise absorption of 1 NRC. Approved Make: Mechtrix-Nishabd/ Unidus/ Anutone |
| 8 | Wall panelling: Providing, fitting and fixing full height wooden paneling to walls from floor lvl to ceiling ht or as per drawing/design made out of 50.8mmx25.4mmx1.34mm thick Aluminium rectangular sections placed @ 600mm c/c both ways on grid, on top of grid 12mm fire resistant and termite proof ply (conforming to IS code :5509) to be provided with 1mm thklaminate as per design/drawing. Approved Make: CustomSTAGE DRAPERY |
| 9 | Suspender: SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Suitable to hold various type grid & other rigging systems. Approved Make: Leksa Lighting/ Canara Lighting |
| 10 | Profile: SITC of C Profile MS Hot rolled strips 3mm thick with Extra U bend used either to create basic supports Customized 40 x 50mmm, All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Makes easier to suspend all the stage machinery Duly powder coated Matt black texture finish paint. Approved Make: Leksa Lighting/ Canara Lighting |
| 11 | Motor Control Panel: SITC of Motor Control Panel with DMX & Manual selectable Motor control panel, cum remote control 1 Way providing power input for motors internally neatly wired with contactors having individual motor control with required Push button, Emergency trip, RYB indicators, Supply Indictor and necessary meters operated wireless smart working functionality for the motorised lightbars should be there with one neutral & phase connection slots and with 2 virtual load terminals. For each motor unit one each switch units should be installed inside the control panels which can be controlled with our mobiles, touch pads only with the internet connection. Motor control panel duly powder coated with ash grey paint texture finish with all required safety features. Approved Make: Leksa Lighting/ Canara Lighting |
| 12 | Cable Connecting Circuit Box: SITC of Cable Connecting Circuit Boxes for the termination of cables from Electrical panel to the grid level point made out of MS Sheet metal fabricated housing duly powder coated with matt black texture finish paint, fitted with required channels and ivory connectors, necessary glands etc. Approved Make: Leksa Lighting/ Canara Lighting |
| 13 | Cable: SITC of FRLS Copper unarmoured Flexible cable IS694 having 7 Core each of 1.5 Sq mm size. Approved Make: Polycab / Finolex/ RR |
| 14 | Cable: SITC of FRLS Copper unarmoured Flexible cable IS694 having 4 Core each of 4 Sq mm size. Approved Make: Polycab / Finolex/ RR |
| 15 | Main Curtain: SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Curtain) Size: 12Mtr x 3.5 Mtr. Approved Make: Omphile/ Nexgen/ Custom |
| 16 | Rear Curtain: SITC of Glazed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Rear Curtain) Size: 12Mtr x 3.5 Mtr. Approved Make: Omphile/ Nexgen/ Custom |
| 17 | Frill: SITC of Glazed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Frills) Size: 7Mtr x 0.75Mtr. Approved Make: Omphile/ Nexgen/ Custom |
| 18 | Main Valance: SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Valance) Size: 11Mtr x 1Mtr. Approved Make: Omphile/ Nexgen/ Custom |
| 19 | Side Wings: SITC of Glazed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 0% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing. (For Wing) 3.5Mtr x 1Mtr. Approved Make: Omphile/ Nexgen/ Custom |
| 20 | Frill Bar: SITC of On Stage Fixed Frill Bar 7Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the frill, connected with MS Flat duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free. Approved Make: Leksa Lighting/ Canara Lighting |
| 21 | Valance Bar: SITC of On Stage Fixed Valance Bar 11 Mtr Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the Main Valance of the stage system duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free. Approved Make: Leksa Lighting/ Canara Lighting |
| 22 | Wing Structure: SITC of Fixed Wing Structure designed as per site condition for a height approx 3.5Mtr x 1Mtr made up of MS Square tube of 25mm or higher size rested on pivotable trolley on a track for the rotation of the wing. Adjustable floor locking screw jacks with rubber grips. Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp and 360° Rotatable. Approved Make: Leksa Lighting/ Canara Lighting |
| 23 | Motorized Main Curtain System: Motorized DMX operated Main Curtain 12 Mtrs straight, Centre parting as per design.This mechanism shall be provided with 01 Nos. of 1 HP /1.5HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440, KW (HP): 0.74(1)/1.1(1.5), Frame: 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, AMB:50 degree. The outer surface temperature is limited. It shall have a Worm Reduction Gearbox with GMRV-90 80:1, 90B5, Single Reduction 7.5:1 to 100:1 and the size shall be 90. It shall have a drive unit base frame to fix the gear box which contains one shaft Made up of I Track for complete length Curtain holding trollies with ball bearings for smoother noiseless movement consisting of 4-wheeler master trolley and 2-wheeler trolley placed uniformly at specific interval of 200mm /250 mm throughout the track Overlap of 0.5~0.9 Mtrs. Motor Cable termination box Trollies are uniformly distributed along the track at every 200/250mm with a master trolley. Open and close limit controller. Drive unit with suitable capacity of motor unit, Wire Rope shall be of GI Wire ropes Min 3mm Dai Undergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated. Approved Make: Leksa Lighting/ Canara Lighting |
| 24 | Fixed Rear Curtain System: SITC of Fixed Rear Curtain 12 Mtr straight, Centre parting as per design made up of I Track for complete length with overlap of 0.5~0.9 Mtr, Trollies uniformly distributed along the track at every 200/250mm with a master trolley. Suspension Through Suspenders as per site conditions Guide pulley fixed to track end for rope routing Cotton Rope, Counter weight used for rope stiffness 4 wheeler and 2 wheeler trolley for curtain moment All metal parts are powder coated with black texture finish paint. Approved Make: Leksa Lighting/ Canara Lighting |
| 25 | FOH Speaker: Supply, installation, testing & Commissioning of Loudspeakers with eight 4.5-inch full-range drivers deliver smooth frequency response, wide dispersion, and exceptional power handling and efficiency. IP55 or better rated loudspeaker system: The loudspeaker free space full range sensitivity shall be at least 92dB-SPL in the 50Hz to 16kHz range. The nominal horizontal beamwidth shall be 120 degrees, and the nominal vertical beamwidth shall be 100 degrees. The power handling capacity of the loudspeaker shall be at least 300 Watts continuous pink noise ( Peak 1200Watts), band-limited from 50Hz to 16kHz. Max SPL shall be 117dB (123dB peak) or better with a nominal impedance of 8 Ohms or higher. Powder-coated steel grill or better. Approved Makes: Bose/ Meyer Sound/ L-Acoustic |
| 26 | FOH Speaker Bracket: Supply, installation, testing, & Commissioning of OEM U-bracket for hanging FOH speakers. Approved Makes: Bose/ Meyer Sound/ L-Acoustic/ Custom |
| 27 | Subwoofer: Supply, installation, testing & Commissioning of a single dual 10\\" subwoofer. The louspeaker shall meet the following criteria: usable Frequency Range (-10 dB) of 35Hz - 130Hz or better. It should have an axial Sensitivity of > = 90dB (1W/1m) or more delivering a free field Max. Calculated SPL(peak) of >=117 db or better. The loudspeaker should have a nominal impedance: 8ohm or more and continuous Power Handling of 500W or more; Complete with installation as per the site requirement. Approved Makes: Bose/ Meyer Sound/ L-Acoustic |
| 28 | Surrounding Speaker: Supply, installation, testing and commissioning of Full range IP55 rated indoor/outdoor surface mounted music loudspeaker. The loudspeaker shall meet the following performance criteria: Usable Frequency range (-10dB) of 70Hz to 19kHz; Power handling of 160 Watt peak; Nominal dispersion of 100°(H) × 100°(V); Sensitivity of 87 dB SPL and Max SPL of 109 dB SPL peak; Nominal impedance of 8 ohms and Integral multi-tap Transformer with selectable tap settings of 5/10/20/40W@70V & 100V. The loudspeaker system shall be comprised of a 4.5-inch woofer; enclosed in engineered-plastics and a powder-coated tamper-resistant steel grille. UL-1480 rated and EN54-24 compliant for Life safety/VA applications.. Approved Makes: Bose/ Meyer Sound/ L-Acoustic |
| 29 | Atmos Speaker: Supply, installation, testing, and commissioning of Full range ceiling-mounted music loudspeaker. The loudspeaker shall meet the following performance criteria: Usable Frequency range (-10dB) of 83Hz to 19kHz; Power handling of 80 Watt peak(AES); Nominal dispersion of 130°(H) × 130°(V); Sensitivity of 87 dB SPL and Max SPL of 105 dB SPL peak; Nominal impedance of 16 ohms and Integral multi-tap Transformer with selectable tap settings of 2/4/8/16W@70V & 100V. The loudspeaker system shall be comprised of a 2.25-inch woofer; enclosed in engineered plastic and a powder-coated tamper-resistant steel grille. UL-1480 rated and EN54-24 compliant for Life safety/VA applications. Approved Makes: Bose/ Meyer Sound/ L-Acoustic |
| 30 | Stage Monitor: Supply, installation, testing & Commissioning of Active Portable loudspeaker system with 2 combo XLR-1/4'' inputs, 3.5 mm input, Bluetooth inputs and 1/4'' TRS line output with 11 hours of play time using the rechargeable lithium ion battery with Freq Response 62Hz - 17kHZ and 109dB peak SPL, 120 H x 50V Nominal coverage. Approved Make: Bose/ L-Acoustic/ Meyer Sound |
| 31 | Wallmount Speaker: Supply, installation, testing, and commissioning of Full range IP55 rated indoor/outdoor surface mounted music loudspeaker. The loudspeaker shall meet the following performance criteria: Usable Frequency range (-10dB) of 83Hz to 19kHz; Power handling of 80 Watt peak(AES); Nominal dispersion of 130°(H) × 130°(V); Sensitivity of 87 dB SPL and Max SPL of 105 dB SPL peak; Nominal impedance of 16 ohms and Integral multi-tap Transformer with selectable tap settings of 2/4/8/16W@70V & 100V. The loudspeaker system shall be comprised of a 2.25-inch woofer; enclosed in engineered plastic and a powder-coated tamper-resistant steel grille. UL-1480 rated and EN54-24 compliant for Life safety/VA applications. Approved Makes: Bose/ Meyer Sound/ L-Acoustic |
| 32 | Amplifier: Supply, installation, testing and commissioning of class D amplifier with 2 x 600 W Load-independent outputs deliver full channel power to either low-impedance (4-8 Ω) or high-impedance (70/100V) loads without bridging .Amplifier shall have frequency response of 20 Hz to 20 kHz (+/- 1 dB) for LZ mode, with THD+N at rated power less than 0.04%.The amplifier shall meet or exceed the following performance specifications: channel separation (crosstalk) greater than 80 dB below rated power at 1 kHz. The amplifier shall have 2 line-level inputs with selectable input sensitivity settings ( -10 dBV, 4 dBu and 14 dBu) for balanced line-level inputs (6-pin Euroblock connector) and possibility of 4 or more no. of digital Audio channels . The amplifier shall offer a master mute connection for use with external dry contacts, normally open or normally closed, to mute all outputs of the amplifier. Approved Makes: Bose/ Meyer Sound/ L-Acoustic |
| 33 | Amplifier: Supply, installation, testing and commissioning of class D amplifier with 2 x 1000 W Load-independent outputs deliver full channel power to either low-impedance (4-8 Ω) or high-impedance (70/100V) loads without bridging .Amplifier shall have frequency response of 20 Hz B21:B23to 20 kHz (+/- 1 dB) for LZ mode, with THD+N at rated power less than 0.04%.The amplifier shall meet or exceed the following performance specifications: channel separation (crosstalk) greater than 80 dB below rated power at 1 kHz. The amplifier shall have 2 line-level inputs with selectable input sensitivity settings ( -10 dBV, 4 dBu and 14 dBu) for balanced line-level inputs (6-pin Euroblock connector) and the possibility of 4 or more no. of digital Audio channels. The amplifier shall offer a master mute connection for use with external dry contacts, normally open or normally closed, to mute all outputs of the amplifier. Approved Makes: Bose/ Meyer Sound/ L-Acoustic |
| 34 | Amplifier: Supply, installation, testing, and commissioning of class D amplifier with 4 x 300 W Load-independent outputs deliver full channel power to either low-impedance (4-8 Ω) or high-impedance (70/100V) loads without bridging. The amplifier shall have a frequency response of 20 Hz to 20 kHz (+/- 1 dB) for LZ mode, with THD+N at rated power less than 0.04%. The amplifier shall meet or exceed the following performance specifications: channel separation (crosstalk) greater than 80 dB at 1 kHz. The amplifier shall have 4 line-level inputs with selectable input sensitivity settings ( -10 dBV/4 dBu/14 dBu) for balanced line-level inputs and the possibility of 4 or more no. of digital Audio channels. The amplifier shall offer a master mute connection for use with external dry contacts, normally open or normally closed, to mute all outputs of the amplifier. Approved Makes: Bose/ Meyer Sound/ L-Acoustic |
| 35 | Amplifier: Supply, Installation, testing and commissioning of integrated high impedance Class D Dual Zone Amplifier with output power of 1 x 90 W @ 70/100 V; Frequency Response - 60 Hz - 20 kHz (+0/-3 dB, @ 1 W reference 1 kHz); THD+N - ≤1 % (at full rated power); Channel Separation (Crosstalk) - ≤-60 dBV (below rated power, 1 kHz); A/D and D/A Converters - 24-bit / 48 kHz; Audio Latency - 10.4 ms (any input to speaker output or aux output); THD <0.3% at rated power. Dynamic range > 88 dB. Maximum Input Level: +10 dBV or better. 1 unbalanced line outputs; built-in loudspeaker EQs. Approved Makes: Bose/ Meyer Sound/ L-Acoustic |
| 36 | DSP: Supply, Installation, testing and commissioning of Digital Audio Processor with at least 12 Mic/Line inputs & 8 analog outputs, 24 Bit A-D and D-A Convertors; Sampling Rate : 48 kHz; THD : < 0.002 % ; Channel Separation (Crosstalk) : < 108 dB ; Frequency Response 20 Hz - 20 kHz ; Signal-to-Noise Ratio 90 dB ;Dynamic Range > 115 dB; 5 Control Inputs and Outputs; RS-232 and Ethernet Port for third party Control and Monitoring; 32X32 or more Bidirectional DANTE Audio Networking ports, Shall include USB Audio as standard Feature. inbuilt DSP features like Conference room Routers, Input Equalizers, Router, Band Pass filter, Output Equalizer, Delay, Limiters, gates , Source selectors etc. Shall Support at least 15 remote Zone controllers. Approved Makes: Bose/ Meyer Sound/ L-Acoustic |
| 37 | AV Receiver: SITC of 11.2 Channel AV receiver with DTS HD master/DTS:X, Dolby Vision, Dolby Atmos, Dolby TrueHD, Dolby Surround, Auro 3D. 7 x HDMI Input & 3 x HDMI Output with HDMI 2.1 & HDCP 2.3 compliant. In-built WiFi and Bluetooth. HDMI CEC, USB input, and Network port. 11.2-Channel Pre Out. Approved Make: MARANTZ/ YAMAHA/ DENON/Equivalent |
| 38 | Audio Mixing Console: Supply, Installation, Testing, & Commissioning of 24-Channel Premium Mixing Console, 16 Mic Inputs with 48V Phantom Power and HPF per Channel, 24 Line Inputs (16 mono and 4 stereo), 6 AUX Sends + 2 FX Sends, 4 GROUP Buses + ST Bus, 1 Matrix out, 1 Mono out. USB Device, iPod / iPhone. Approved Make: Yamaha/ Allen & Heath/ Behringer/ Studio Master |
| 39 | Ceiling PA speaker: Supply, installation, testing, and commissioning of 30W ceiling mount loudspeaker with 100V transformer, the frequency range of 70 Hz to 20 kHz. Coaxial full-range speaker with poly cone tweeter. Integral multi-tap Transformer with selectable tap settings of 7.5/15/30W@100V. Approved Make: Bosch/ Bose/ Yamaha |
| 40 | Amplifiers: Supply, Installation, testing, and commissioning of mixer amplifier with 240 W output power, 4 microphone/line inputs, USB, in-built Bluetooth, Frequency response of 80 Hz to 18 kHz. Approved Make: Bosch/ Bose/ Yamaha |
| 41 | Vocal Microphone: Supply, Installation, Testing, and commissioning of wired Dynamic Cardioid wired handheld microphone with an on/off switch should have the following features- Frequency Response: 50 to 15,000 Hz, Polar Pattern: Cardioid, Sensitivity: –54.5 dBV/Pa or 1.85 mV, Impedance: 150 Ω, Connector: Three-pin male XLR. Approved Makes: Sennheiser/ Shure/ AKG/Beyerdynamic |
| 42 | Instrument Microphone: Supply, Installation, Testing, and commissioning of wired Dynamic microphone for musical instrument pickup with Frequency Response: 40 to 15,000 Hz, Polar Pattern: Cardioid, Output Impedance: 310 Ω, Connector: Three-pin XLR male, Sensitivity: -56 dBV/Pa or 1.6 mV, Housing: Die-cast steel with a polycarbonate grille and a stainless steel screen. Approved Makes: Sennheiser/ Shure/ AKG/ Beyerdynamic |
| 43 | Handheld Wireless Microphone: Supply, Installation, testing, and commissioning of Wireless handheld dynamic cardioid microphone with a rack mount receiver should have the following specifications: Frequency response: 50Hz – 15Khz, Available Frequencies: 524–865 MHz, Battery Life up to 12 hours with AA alkaline battery, Operating Range: 300 ft, Transmitter RF Output Power: 10 mW, Dynamic Range: 100 dB, THD<=0.5%. Receiver- Up to 12 compatible systems per frequency band. LCD display with detailed RF and audio metering. XLR and 1/4\\" unbalanced connector. Max Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4\\"). 12–18 V DC power supply, Operating Temperature Range: -18°C – +50°C. Approved Makes: Sennheiser/ Shure/ AKG/ Beyerdynamic |
| 44 | Lapel Wireless Microphone: Supply, Installation, testing, and commissioning of Wireless lavalier dynamic cardioid microphone with a rack mount receiver should have the following specifications: Frequency response: 50 to 20,000 Hz, Available Frequencies: 524–865 MHz, Battery Life up to 14 hours with AA alkaline battery, Operating Range: 300 ft, Transmitter RF Output Power: 10 mW, Dynamic Range: 100 dB, THD<=0.5%. Receiver- Up to 12 compatible systems per frequency band. LCD display with detailed RF and audio metering. XLR and 1/4\\" unbalanced connector. Max Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4\\"). 12–18 V DC power supply, Operating Temperature Range: -18°C – +50°C. Approved Makes: Sennheiser/ Shure/ AKG/ Beyerdynamic |
| 45 | Gooseneck Microphone with Base: Supply, Installation, Testing, and Commissioning of wired Condenser 18-inch Gooseneck microphone with base with Polar Pattern: Cardioid, Maximum SPL: 124 dB, Frequency Range: 50 Hz – 17 kHz, Dynamic Range 1 kΩ load at 1 kHz: 96.2 dB 100 dB at 0 gain, Sensitivity: –35 dBV/Pa or 17.8 mV, Equivalent Output Noise: 28 dB SPL, Signal-to-Noise Ratio: 66 dB, Common Mode Rejection: 45 dB minimum, Preamplifier Output Clipping Level 1% THD: –6 dBV or 0.5 V, Mute Switch Attenuation: –50 dB minimum, Power Requirements: 11 – 52 Vdc phantom, 8 mA. Operating temperature range: -18° – 57° C. Relative humidity: 0 – 95%. Feature: Green LED at the bottom, bottom cable exit, preamp, black, 3-pin XLR Connection, programmable mute switch. Approved Makes: Sennheiser/ Shure/ AKG/ Beyerdynamic |
| 46 | Projector: Supply, Installation, Testing & Commissioning of LCD Laser/ DLP Projector with 5000 Lm, WUXGA resolution, Laser light source, LCD projector with HDMI X 2, VGA IN X 2, VGA Out x 1, Video IN X 1, Audio IN X 3, Audio Out x 1, USB Type A X1, RS232 X 1, LAN X 1, HD Base-T X 1, 1.6X Zoom lens, 30,000,00 :1 Contrast ratio, 20,000 hours light source life along with fixed zoom lens of throw ratio 1.09 - 1.77:1. Approved Makes: Panasonic/ Epson/BenQ/ Viewsonic |
| 47 | Projector Stand: SITC of Flexible 2+2 feet MS bracket. Approved Make: Custom |
| 48 | Screen: Supply, Installation, Testing & Commissioning of Motorised Projection Screen, 16:9 format, Dimensions: 192\\" x 108\\", 220\\" Diagonal, Tensioning system provides an extra flat surface for optimum image quality, Da-Mat surface, Heavy duty Extruded aluminium Case with low voltage dry contact to interface with Control systems. Make: Liberty/ Digilite/DA-LITE/Equivalent |
| 49 | Digital Podium: Supply, Installation, Testing & Commissioning of Digital Podium with 21.5\\" Interactive Display with document camera having Motorized Panel Facility, Monitor Highly sensitive Interactive Touch Monitor and mechanism to make the panel stable to avoid any kind of shake while wiring. Screen Type Color LED; Scratch resistant, antiglare & overlay tempered vandal resistant glass (3mm thickness), Size 21.5” (54.61 cm), Resolution 1920 x 1080 (Full HD), Aspect Ratio 16:9/ 16:10, Response Time 8 ms, Brightness 250 cd/m2, Lamp Life Time 20,000 Hrs, Contrast Ratio 1000:1, Computer Interface USB x 1, VGA x 1, DVI x 1, HDMI x 1, Interactive Resolution 4000 Lpi (lines per inch), Viewing Area 477mm x 268mm (H/V), 22 inch, Reading Accuracy ±0.5 mm (center), Tracking Speed 200 points per second, Pen Pressure sensitivity 2048 Levels, Viewing Angles 160(H); 160(V), Touch Finger and Stylus, Ports HDMI in x 1, VGA in X 1, DVI - I in X 1, with gooseneck microphone facility, USB 2.0 A Type for Touch, Power 12V(DC) 3.5 Amp. Approved Make: Globus/ PEOPLELINK/ Wacom/ UNI |
| 50 | CPU: Supply, Installation, Testing & Commissioning of CPU with Intel® Core i5, 8 GB RAM or better, 500 GB SSD or better preloaded Windows OS and MS Office with mouse and keyboard. HDMI, USB 3.0 Ports. Make: HP/ DELL/ LENOVO |
| 51 | 65\\" Display: Supply, Installation, Testing & Commissioning of 65\\" 4K UHD(3840 X 2160) LED display, 300 Cd/m2, 2GB DDR4 memory, 8GB storage, HDMI 2.0 X 4, DP 1.2a X 1, USB- A 3.0 x 1, USB-A 2.0 x 1 USB-A 2.0 (Internal) x1, USB-C 3.0 x 1, HDMI Out x 1, RJ45 X 1, RS232 X 1, Audio IN X1, Audio Out x 1, Optic SPDIF, RJ12 x 1, 20W in built speaker, 24/7 operation, Built in Wifi & Bluetooth, HTML5 CMS Launcher, Android CMS Launcher, Scheduler, USB-Autoplay, Auto-Launch, HDMI-CEC, HDMI-Wakeup, OSD and UI Rotation, Video Rotation, NoSignalPowerOff, Pixel shift, Videowall support, Real Time Clock. Approved Make: Panasonic/ Barco/ Christie/ Sony/ Samsung |
| 52 | HD Base T Extender Set: SITC of HDMI 2.0 HDBaseT Extension Set, Extend HDMI 2.0 signals up to 4K@60Hz / 4:4:4 up to 70m (4K 40m / 1080P 70m), Complete set Includes TX, RX, power supply, and IR flasher/emitter, Extends bi-directional IR. Flexible PoC (Power on either end), Supports HDR10, HDCP 2.2 compliant, Flexible power design (use power supply at TX or RX). Approved Make: LibertyAV/ Crestron/ Extron |
| 53 | HDMI Switcher: Supply, Installation, Testing & Commissioning of four input by four output HDMI 2.0 matrix switcher with HDCP 2.2 support and capable of handling resolutions up 4K@60Hz 4:4:4 / 8 bit color with static and dynamic HDR output support for each channel. The matrix features advanced independent EDID management control for each HDMI. The analog and digital audio outputs can be set to follow the HDMI video route or can be independently routed either by API or web control interface. The 4x4 switcher can be controlled via front panel buttons, front panel IR, external IR, remote IR, RS232, and Ethernet. Approved Make: LibertyAV/ Crestron/ Extron |
| 54 | Short Microphone Stand: SITC of Light weight alluminium Microphone stand with short Arm, boom type & chrome plating ( small). Make: STANDARD |
| 55 | Long Microphone Stand: SITC of Light weight alluminium Microphone stand with Long Arm, boom type & chrome plating (Big). Make: STANDARD |
| 56 | HDMI Cable: Supply, Installation, Testing, & Commissioning of 1.5mtr. High-performance Cables With Molded HDMI Connectors At Both Ends. HDMI Standard Supports High-definition Video Plus Multi-channel Audio In A Single Cable. Approved Makes: LibertyAV/ Falcon/ Honewell |
| 57 | Snake Cable: SITC of 8 pair Analog Audio Snake Cable, 24AWG stranded (7x32) TC conductor, Polyolefin insulation, individually shielded, number or color-coded PVC jackets, jackets, and shields bonded to strip simultaneously over all shield and 24 AWG TC drain wire. Approved Makes: Krystals/ LibertyAV/ Belden |
| 58 | 4 SQMM Speaker cable: Supply and Drawing of High-conductivity copper speaker Cable, 4 SQ mm stranded tinned copper conductor, PVC insulation, twisted pair, PVC jacket in the existing surface/recessed steel/PVC conduit. Approved Makes: Krystals/ LibertyAV/ Belden/ Finolex |
| 59 | 2.5 SQMM Speaker cable: Supply and Drawing of High-conductivity copper speaker Cable, 2.5 SQ mm stranded tinned copper conductor, PVC insulation, twisted pair, PVC jacket in the existing surface/recessed steel/PVC conduit. Approved Makes: Krystals/ LibertyAV/ Belden/ Finolex |
| 60 | Microphone Cable: Supply and laying of 2-core PVC-insulated Cu conductive shielded microphone cable. Approved Makes: Krystals/ LibertyAV/ Belden |
| 61 | Cat6 Cable: Supplying and laying of Cat 6 24AWG U/UTP Cable with necessary acessories. Approved Makes: Belden/ Legrand/ Dlink/ Digisol/ Molex |
| 62 | Stage Box: Supply and Fixing of 6 XLR socket panel including sockets on the stage wall/Floor as required. Make: Pro-Media/ Custom |
| 63 | Connectors: SITC of required adequate XLR, TRS, EP Stereo, RCA connectors for all speakers. Make: Neutrik/ MX/ Krystals/ Belden/ Legrand/Equivalent |
| 64 | Mounting Rack: SITC of 24 U 500/600D Mounting Rack suitable for above items with cooling fan, 4 nos power distribution Box, cable manager, front Glass door, castor wheels, lock, and a Key. Make: Valrack/ Netrack/ Dlink/ Rittal |
| 65 | STAGE LIGHTING100W Parcan Light: SITC of CE Certified 100W LED PARCAN Light with latest RDM technology for user friendly operation with below specifications: • Light Source : Single COB LED Source• Power Factor : >0.95 @ 230V AC 50Hz• Color Temperature : 3200K with CRI & TLCI Value > 90• Power cable: 3 core 1 sq. mm. copper PVC insulated • Channels: 1/2 DMX-512 Channel Modes• Beam angle: 9°/15°/20°/25°/30° Manually Selectable • Control mode: RDM, DMX512 & Manual, Master/Slave, Auto run• Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project.• LUX @ 2m: > 35,000 @ 9° Beam Angle• Flickering Rate : more than 10000 FPS • Dimming: 0 - 100% Electronic Dimming• Function: Strobe, Dimming• Housing : Spun Aluminium Housing with black epoxy polyster powder coated finish.• Accessory slot for Gel frame and Barndoor should be available or else fixture will be rejected.• Power and DMX: Loop in and loop out compulsary• DMX in & Out Through : 5 Pin XLR connectors• Certification: CE / BISMake: Leksa Lighting /Canara Lighting/ETC/ADJ/EquivalentAuditorium |
| 66 | 200W LED Profile Spot Light: SITC of CE Certified 200W LED Profile Spot Light with latest RDM technology for user friendly operation with below specifications: • Light Source : Single LED COB Source• Power Factor : >0.95 @ 230V AC 50Hz• Color Temerature : 3200K, CRI & TLCI Value > 95• Power cable: 3 core 1 sq. mm. copper PVC insulated • Channels: 1/2/3 DMX-512 Channel Modes• Beam Angle : 19° or 15°• Control mode: RDM, DMX512 & Manual, Master/Slave, Auto run• Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project.• Lux output at 2 Mtr : > 20,000 Lux @ 19° or 15°• Flickering Rate : more than 10000 FPS • Dimming: 0 - 100% Electronic Dimming • 4 Beam shaping shutters• Accessory slot for Gobo and gobo holder, Iris & Color Frame should be available or else fixture will be rejected.• Housing: Metal Housing with black epoxy polyster powder coated finish or PVC Body with matt black finish• Power and DMX: Loop in and loop out compulsary • DMX in & Out Through : 5 Pin XLR connectors • Certification: CE / BISMake: Leksa Lighting /Canara Lighting/ETC/ADJ/EquivalentAUDITORIUM |
| 67 | 400W LED Blinder Effect Light: SITC of CE Certified 400W LED Blinder Effect Light with latest RDM technology for user friendly operation with below specifications: • Light Source : Quad LED COB Source• Power Factor : >0.95 @ 230V AC 50Hz• Color Temerature : 3200K, CRI & TLCI Value > 95• Power cable: 3 core 1 sq. mm. copper PVC insulated • Channels: 4/8 DMX-512 Channel Modes• Beam Angle : 40°• Control mode: RDM, DMX512 & Manual, Master/Slave, Auto run• Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project.• Lux output at 2 Mtr : > 10,000 Lux @ 40°• Flickering Rate : more than 10000 FPS • Dimming: 0 - 100% Electronic Dimming• Power and DMX: Loop in and loop out compulsary• DMX in & Out Through : 5 Pin XLR connectors• Certification: CE / BISMake: Leksa Lighting /Canara Lighting/ETC/ADJ/EquivalentAUDITORIUM |
| 68 | 200W LED Fresnel spot light: SITC of CE Certified 200W LED Fresnel spot light with minimum following Technical specifications• Light Source : Single LED COB Source• Color Temerature : 3200K• CRI & TLCI : > 95 • Beam Angle : 10° - 50° manual Zoom • Lux output at 2 Mtr : > 38,500 Lux @ Spot &> 2,100 Lux @ Flood. • Flickering Rate : more than 20000 FPS• Accessory slot for Gel frame and Gel Filter Frame should be available or else fixture will be rejected.• Control Protocol : DMX & Manual• Fully RDM Compliant in DMX Mode• Manual Control via Touch pad. Tactile Switch for manual control fixture will be rejected.Make: Leksa Lighting / Canara Lighting/ADJ/ETC/EquivalentAUDITORIUM |
| 69 | RGBW PAR Light: SITC of CE Certified 54 x 3W LED RGBW PAR Light with latest RDM technology for user friendly operation with below specifications: • Base Color RGBW Color Mixing• LED Configuration : Multiple Nos Individual RGBW LED Configuartion• Power cable: 3 core 1 sq. mm. copper PVC insulated • Channels: 8 DMX-512 • Beam angle: 15° • Control mode: RDM, DMX512 & Manual, Master/Slave, Auto run, Sound Active• Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project.• LUX @ 2m: >10,500 @ 15° Beam Angle• Dimming: 0 - 100% Electronic Dimming• Function: strobe, dimming, sound active and Master slave.• Housing: Die Casted Aluminium or Metal Housing with black epoxy polyster powder coated finish.• Accessory slot for Gel frame and Barndoor should be available or else fixture will be rejected.• Power and DMX: Loop in and loop out compulsary• DMX in & Out Through : 5 Pin XLR connectors• Certification: CE / BIS Make: Leksa Lighting /Canara Lighting/ETC/ADJ/EquivalentAUDITORIUM |
| 70 | Moving Head Light: SITC of Moving Head of 230W Beam with Input Voltage: AC110/220V, 50/60Hz, Lamp：7R 230W, Power: 350W, Life Time: 2200 hours, Color Temperature:8000K, DMX Channel: 16CH, Pan: 540° (16bit), Tilt: 270° (16bit), Color Wheel: 14 colors +open, Gobo Wheel: 17 gobos + open, Effect Wheel: 8 facet rotating prism + frose + shake,Strobe: 0.5-9f/s, roandom or pulse flash, speed adjustable, strobe macro function,Dimmer: 0%-100% mechanical, Beam angle: 0% - 4% mechanical.Make: Leksa Lighting /Canara Lighting/ETC/ADJ/EquivalentAUDITRIUM |
| 71 | Tunnable PAR Light: SITC of CE Certified 54 x 3W LED 3200K to 5600K Tunnable PAR Light with latest RDM technology for user friendly operation with below specifications: • Base Color 3200K to 5600K Color Mixing• LED Configuration : Multiple Nos Individual 3200K and 5600K LED Configuartion• Power cable: 3 core 1 sq. mm. copper PVC insulated • Channels: 1 DMX-512 • Beam angle: 15° • Control mode: RDM, DMX512 & Manual• Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project.• LUX @ 2m: >7,500 @ 15° Beam Angle• Dimming: 0 - 100% Electronic Dimming• Function: strobe, dimming, sound active and Master slave.• Housing: Die Casted Aluminium or Metal Housing with black epoxy polyster powder coated finish. • Accessory slot for Gel frame and Barndoor should be available or else fixture will be rejected.• Power and DMX: Loop in and loop out compulsary • DMX in & Out Through : 5 Pin XLR connectors • Certification: CE / BISMake: Leksa Lighting /Canara Lighting/ETC/ADJ/EquivalentAUDITORIUM |
| 72 | C - Clamp: SITC of Die cast Aluminium C - Clamp with safety chain duly epoxy polyester powder coated in black matt texture finish and safe working load of 100kg with below specifications.• Lock - MS threaded Galvanized lock key, • Plastic Glass filled nylon moulded M6 key. • Receptacle - 28mm standard TV spigot. • Safety - MS Galvanized chain with pin. • Finish - Pretreated and black epoxy polyester powder coated. • Self-weight - 0.54KgMake: Leksa Lighting /Canara Lighting/ETC/ADJ/EquivalentAUDITORIUM |
| 73 | Safety bond: SITC of Safety bond with lock clip 1.5 Mtr Long made with twisted pair of GI wire rope 3mm thick with sleeve to be fixed around the grid to avoid fall of the material in case if the \\"C\\" clamp is not locked properly. SWL 100Kgs.Make: Leksa Lighting /Canara Lighting/ETC/ADJ/EquivalentAUDITORIUM |
| 74 | MS Suspender: SITC of Customized MS Suspenders made up of • MS fish plate 150 x 150 x 6 mm with hardware’s if required as per site condition• MS Angle 40 x 40 x 5 mm or higher size required length as per site condition.• Height adjustable M12 stud of suitable length as per site requirement along with suitable hardware’s with pipe coupler clamp. (As per site requirement).• All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish.Make: Leksa Lighting /Canara Lighting/ETC/ADJ/EquivalentAUDITORIUM |
| 75 | Stage Light Bar: SITC of Fixed Stage Light Bar, length 6 Mtrs made using MS 40NB Class ‘B’ Pipe dual barrel construction arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications:• Dual barrel Light bar equipped with 40x75x40 Cable trenching arrangement with lid for better aesthetic look and cable safety. • Dual barrel pipe construction welded with 75x6mm MS Flat in every 1 Mtr for better strength • With Suitable Suspenders to fix the light bar with every 2mtr pitch.Make: Leksa Lighting /Canara Lighting/ETC/ADJ/EquivalentAUDITRIUM |
| 76 | Stage Light Bar: SITC of Fixed Stage Light Bar, length 3 Mtrs made using MS 40NB Class ‘B’ Pipe dual barrel construction arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications:• Dual barrel Light bar equipped with 40x75x40 Cable trenching arrangement with lid for better aesthetic look and cable safety. • Dual barrel pipe construction welded with 75x6mm MS Flat in every 1 Mtr for better strength • With Suitable Suspenders to fix the light bar with every 2mtr pitch.Make: Leksa Lighting /Canara Lighting/ETC/ADJ/EquivalentAUDITORIUM |
| 77 | FOH Light Bar: SITC of Fixed FOH Light Bar, length 8 Mtrs made using MS 40NB Class ‘B’ Pipe dual barrel construction arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications:• Dual barrel Light bar equipped with 40x75x40 Cable trenching arrangement with lid for better aesthetic look and cable safety. • Dual barrel pipe construction welded with 75x6mm MS Flat in every 1 Mtr for better strength • With Suitable Suspenders to fix the light bar with every 2mtr pitch.Make: Leksa Lighting /Canara Lighting/ETC/ADJ/EquivalentAUDITORIUM |
| 78 | Lighting Distribution Board: SITC of Well designed 15 Way Direct Lighting Distribution Board made up of CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt texture finish consists of R, Y, B Indicator lamp, 63 A 4P MCCB,16kA adjustable thermal and fixed magnetic type with Ics=100%Icu. incomer, 15 Nos 10A SP Mcb's,10kA C Series 4 Nos 6A SP MCB's ,10kA C Series and for the junction boxes fixed on the top of the light bar including wiring and busbar connection with proper earthing and Hingable door with magnetic door lock complete. Make of mccb:Legrand Dpx3/ABB Formula/Schneider CVS/Siemens 3VA/EquivalentAUDITORIUM |
| 79 | Lighting Junction box: SITC of MS Fabricated Lighting Junction box made up of 22SWG CRCA for LED lighting fixtures, black epoxy polyester powder coated, with 2 way 10A IEC sockets and pipe clamp arrangement with below specifications.• 4 way 10A IEC Socket • Fixing : Snap fit /15 (1.5mm), • CE certified FC/PG 11 cable entry gland, • Junction Box must be compact of Size : 140 x 112 x 50mm or less • with suitable fixing arrangement.Make: Leksa Lighting /Canara Lighting/ETC/ADJ/EquivalentAUDITORIUM |
| 80 | 4way IEC Junction box: SITC of MS Fabricated 4way IEC Junction box with rocker switch to power splitter and console made up of 22SWG CRCA, black epoxy polyester powder coated and pipe clamp arrangement.• 2 way 10A IEC Socket • DPST 4 Pins Toggle Button Rocker switch • CE certified FC/PG 11 cable entry gland, • Junction Box must be compact of Size : 140 x 112 x 50mm or less • with suitable fixing arrangement.Make: Leksa Lighting /Canara Lighting/ETC/ADJ/EquivalentAUDITORIUM |
| 81 | DMX Signal IN Junction box: SITC of MS Fabricated 5 pin DMX Signal IN Junction box fitted with 5 pin DMX Male plug made up of 22SWG CRCA, black epoxy polyester powder coated and pipe clamp arrangement with below specifications. • 5 pin XLR DMX IN (Male plug) of reputed make connector, • New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination, • Optional connection to easily join pin 1 to chassis ground. • CE certified FC/PG 7 cable entry gland, • Junction Box must be compact of 125 x 112 x 50mm or less • with suitable fixing arrangement.Make: Leksa Lighting /Canara Lighting/ETC/ADJ/EquivalentAUDITORIUM |
| 82 | DMX Signal OUT Junction box: SITC of MS Fabricated 5 pin DMX Signal OUT Junction box fitted with 5 pin DMX Female plug made up of 22SWG CRCA, black epoxy polyester powder coated and pipe clamp arrangement with below specifications. • 5 pin XLR DMX OUT (Female plug) of reputed make connector, • New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination, • Optional connection to easily join pin 1 to chassis ground. • CE certified FC/PG 7 cable entry gland, • Junction Box must be compact of 125 x 112 x 50mm or less • with suitable fixing arrangement.Make: Leksa Lighting /Canara Lighting/ETC/ADJ/EquivalentAUDITORIUM |
| 83 | DMX lighting junction Loop box: SITC of DMX lighting junction Loop box made up of 22SWG CRCA sheet of jindal make undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish 5 pin XLR DMX in / out connector of below specifications:-• Extra high temperature resistant insulator material.• All metal housing offers best overall RF protection & electromagnetic shielding. • New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination. • Optional connection to easily join pin 1 to chassis ground.Make: Leksa Lighting /Canara Lighting/ETC/ADJ/EquivalentAUDITORIUM |
| 84 | Internal earthing: SITC of Internal earthing copper bare conductor of size 14 SWG for power network related to work coming under our scope and Installation hardware’s such as clamps, connectors, glands, lugs, ferrules, welding rods and miscellaneous items required during installation work.Make: Leksa Lighting /Canara Lighting/ETC/ADJ/EquivalentAUDITORIUM |
| 85 | Cable Tray: MS perforated trays of size 40 x 150 x 40mm undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish along with clamping arrangement.Make: Leksa Lighting /Canara Lighting/ETC/ADJ/EquivalentAUDITORIUM |
| 86 | Cable Tray: MS perforated trays of size 40 x 75 x 40mm undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish along with clamping arrangement.Make: Leksa Lighting /Canara Lighting/ETC/ADJ/Equivalent |
| 87 | XLR male / female connectors: SITC of 5 pin XLR male / female connectors of made up of Extra high temperature resistant insulator material, Larger solder contacts for easier termination of reputed make.Make: Leksa Lighting /Canara Lighting/ETC/ADJ/EquivalentAUDITORIUM |
| 88 | XLR Termination plug: SITC of 5 Pin XLR Termination plug made up of extra high temperature resistant insulator material, Larger solder contacts for easier termination with 120 Ohm resister with 0.25Watt for signal termination of reputed make. Make: Leksa Lighting /Canara Lighting/ETC/ADJ/EquivalentAUDITORIUM |
| 89 | DMX Controller: supply, installation, laying, testing, commissioning, and programming of DmX Touch Screen based controller having 7” Multi touch screen option 2 DmX Outlets 5 Pin XLR’s, 512 Channels each, Optically isolated outputs, 4 Smooth Encoders for control operation of attributes, Backlit keys, 12 Fader Stacks, 600+ Playbacks, 350+ Group saving, 350+ Presets, User defined shape effects, Macro saving options, External Midi timecode options, Internal clock, Shortcut user interfaces, Master fader, Blackout Key under Master fader, Numerical keypad for the light command entry inbuilt embedded within controller, USB interface, Scene saving options, Show saves and load save features, custom built user interface library for fixture files. .Make: Leksa Lighting / Canara Lighting/ADJ/ETC/EquivalentCONTROL ROOM |
| 90 | DMX Splitter: SITC of RDM Compatible DMX Splitter with 1 DMX in and optically isolated 8 DMX out port for DMX network• Splitter enclosure made up of MS 18/16 SWG CRCA sheet undergone through 7 tank process withvarious chemical treatment to keep them rust free, duly epoxy polyester powder coated with Mattblack texture finish.• Control Protocol RDM and DMX 512 • 2 DMX input 5 pin XLR Connectors • 8 optically isolated DMX output 5 pin XLR Connectors • IEC/Nutrik male plug to power supply the splitter • 4 Nos of high precision tactile switch for mode selection. • Splitter must be compact of Size : 145 x 483 x 45mm or less • Splitter bracket for mounting or 19” rack mountMake: Leksa Lighting /Canara Lighting/ETC/ADJ/EquivalentAUDITORIUM |
| 91 | Cable: SITC of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 3cx1.5 sq mm. Make-Polycab/Havells/KEI/Finolex/RR KabelAUDITORIUM |
| 92 | DMX Cable: SITC of DMX signal cable for DMX network. Make-Falcon/Belden/EquivalentAUDITORIUM |
| 93 | UPS: Supply, installation, testing & commissioning of 30KVA UPS SYSTEM WITH IGBT based inverter system, true online double conversion system, inbuilt isolation transformer & automatic phase sequence corrector of 3ph in put to 3 ph output,415V, with built in BMS with battery back up up to 30 minutes with MS Rack for battery Housing, DC cable 7 Mtr with SFU and links for installation (Battery required: 12V, 65AH, 40 No.s) protection for fault by OL,UV,EF,GF,OC,Ph. (Make:Numeric/APC/ Vertiv) as per direction of Engg.-in-Charge. Warranty period of all accessories & component & system must be 2 years & complete test certificate must be submitted along with ups including component list & SLD. |
| 94 | UPS Panel: Supply, installation, testing & commissioning of CPRI tested LT electrical panel (UPS PANEL) made out by 2mm CRCA steel sheet duly derusted & painted by siemens gray powder cote paint fallowed by 9 tank acid treatment is designed as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list.20X10MM Separate Aluminium Earth bus bar should be installed.In commer-01 number of 100A 4P Icu=100%Ics,25Ka MCCB withwith TMR based release with adjustable overload and fixed magnetic ,Icu=100%Ics ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider-CVS/ ABB FormulaBusbar-04 numbers of 150Amps Aluminium busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. (for outgoing) Out going- 02 numbers of 63A 4P MCCB,,16Ka MCCB withTMR based release with adjustable overload and fixed magnetic ,Icu=100%Ics( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider-CVS/ ABB Formula) Instrument- (i)3 numbers phase indicating lamp with toggle switch & HRC fuse. (ii) 01 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indicationIII)1 no. 3P+N 40kA type 2 SPD with 63A rating,10KA breaking capacity ,4P MCB(Make-LEGRAND/ Siemens/ Schneider/ABB/OBO/DEHN) |
| 95 | Sub Panel: Supply, installation, testing & commissioning of 100A 16 SWG sub panel 100A with 4P Icu=100%Ics,25Ka MCCB withTMR based release with adjustable overload and fixed magnetic ,Icu=100%Ics ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider-CVS/ ABB Formula ) with R,Y, B Indicator. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
