|
| 1 | Item No.1 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed)....(INo24-01 NS, PgNo 175) ( STATE SSR) Item Spec: (Bd. E. 1 Page No. 287) RA NO.: 1 |
| 2 | Item No.2: Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.....(INo27-01, PgNo 197) (STATE SSR) Item Spec: (Bd.G. 1 Page No. 313)RA NO. : 2 |
| 3 | Item No.3: Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete....(INo27-05, PgNo 197) (STATE SSR) Item Spec: (Bd.G.5 Page No. 315) RA NO.: 3 |
| 4 | Item No.4: Providing rough cast cement plaster externally in two coats with coloured cement finish to concrete/brick/ stone masonry surfaces in all positions with base coat 12 to 15 mm. thick in C.M. 1:4 using gray cement and rough cast treatment 12 mm thick in proportion of 1:1 1/2:3 using colour pigment including scaffolding and fourteen days curing etc. complete.....(INo32-13, PgNo 210) (STATE SSR) Item Spec: (Bd.L.9, Page No.370) RA NO.: 4 |
| 5 | Item No.5: Providing internal cement plaster 6 mm 7. thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete..... (INo32-01, PgNo 209) (STATE SSR) Item Spec: (Bd.L.1 Page No. 367) RA NO. : 5 |
| 6 | Item No.6: Providing internal cement plaster 20mm thick in single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete.... (INo32-07, PgNo 209) (STATE SSR) Item Spec: (Bd.L.4 Page No. 368) RA NO.: 6 |
| 7 | Item No.7: Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete.....(INo32-15, PgNo 210) (STATE SSR) Item Spec: (Bd. L. 10, Page No.370 |
| 8 | Item No.8: Providing and fixing in position (as per 1868/1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating without box....(INo39-44, PgNo 254) ( STATE SSR) Item Spec: (As directed by engineer-in-charge.) |
| 9 | Item No. 9: Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete..... (INo40-02, PgNo 264) (STATE SSR) Item Spec: (Bd.U. 1 Page No. 537) |
| 10 | Item No.10: Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary. curing, etc. complete..... (INo33-48, PgNo 218) ( STATE SSR) Item Spec: (Bd. M. 12) |
| 11 | Item No. 11: Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M. 1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. 8 (INo31-04, PgNo 205) (STATE SSR) Item Spec: (As directed by Engineer in charge.) RA NO.: 7 |
| 12 | Item No.12: Providing and laying ceramic tiles having size 30 cm x 30 cm confirming I.S. 15622/2006 (group D II-A)and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. Complete.....(INo33-24, PgNo 215) (STATE SSR) Item Spec: (Bd. M.12 Page No. 385.) RA NO.: 8 |
| 13 | Item No. 13: Providing and laying ceramic tiles having size 30 cm. X 30 cm. For dado and skirting in required position with readymade adhesive mortar ofapproved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. Complete..... (INo33-25, PgNo 215) (STATE SSR) Item Spec: (Bd.M. 13 Page No. 386.) RA NO.: 9 |
| 14 | Item No.14: Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete..... (INo42-30, PgNo 277) ( STATE SSR) Item Spec: (As directed by Engineer in charge.) |
| 15 | Item No. 15: Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters....(INo42-53, PgNo 280) (STATE SSR) Item Spec: (As directed by engineer-in-charge.) |
| 16 | Item No.16: Providing and fixing on walls/ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete..... (INo42-55, PgNo 280) ( STATE SSR) Item Spec: (BD.V 5 page 551 and as directed by Engineer in charge) |
| 17 | Item No. 17: Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.... (INo42-51, PgNo 279) (STATE SSR) Item Spec: (As directed by Engineer in charge.) |
| 18 | Item No.18: Providing and fixing frame with / without ventilator of size as specified with Country cut teakwood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete.... (INo39-01, PgNo 245) (STATE SSR) Item Spec: (As directed by Engineer in charge.) |
| 19 | Item No. 19: Providing and fixing solid core flush door 3 shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.....(INo39-09, PgNo 246) (STATE SSR) Item Spec: (Bd-T-34, Page No. 499) |
| 20 | Item No.20: Providing and fixing solid core flush door e shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete.....(INo39-10, PgNo 246) (STATE SSR) Item Spec: (Bd-T-36, Page No. 500) |
| 21 | Item No. 21: Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete..... (INo39-58 PgNo 257) (STATE SSR) Item Spec: (As directed by engineer-in-charge) |
| 22 | Item No.22: Providing and applying colour-wash of approved colour and shade in two coats to old surfaces which are to be recoloured including scaffolding, brushing and brooming down. (excluding base coat of white-wash) etc. complete..... (INo36-07, PgNo 227) ( STATE SSR) Item Spec: (Bd.P.3 Page No. 412) |
| 23 | Item No. 23: Providing & applying washable oil-bound distemper of approved colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.....(INo36-11, PgNo 227) (STATE SSR) Item Spec: (Bd.P.5 Page No. 413) |
| 24 | Item No.24: Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.....(INo35-13, PgNo 224) (STATE SSR) Item Spec: (Bd.0.8 Page No. 406) |
| 25 | Item No. 25: Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. Complete. A) Flooring.... (INo33-42, PgNo 217) (STATE SSR) Item Spec: (Bd.M. 12 Page No. 385) RA NO.: 10 |
| 26 | Item No.26: Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge....(INo6-36, PgNo 60) (STATE SSR) Item Spec: (MORTH 801) |
| 27 | Item No. 27: BRICKS Water Absorption (Set of 5 Bricks), Compressive Strength(Set of 5 Bricks), Efflorescence (Set of 5 Bricks)..... (INo13-VQC, PgNo 584) (STATE SSR) Item Spec: (As per Standard Specification) |
| 28 | Item No.28: Royalty Charges for RUBBLE. Rate = Royalty + surcharge (2%) (211.95 +4.23 216.18 Per Cum)....(INo1-J, PgNo 1) (STATE SSR) Item Spec: (As Directed By Engineer Incharge) Please Enable Macros to View BoQ information |
