|
| 1 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 2 | Excavation of soil( any type ) using hydraulic excavator CK 90 excavation with hydraulic excavator of 0.9 cum capacity including cutting trimming bottom and side slopes in accordance with requirement of grades and cross sections, includingall lift and combined lead upto 30 mtr. |
| 3 | Cement concrete 1:3:6 with stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type |
| 4 | Centering and shuttering for faces of walls, partitions,retaining walls and the like (vertical or battering including attached pilasters buttresses etc. |
| 5 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008), for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete |
| 6 | Reinforced cement concrete M-20 mechanically batchmixed using batch type concrete mixer asper IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure |
| 7 | Filling triangular portion under coping and on side of toe wall underneath lining with 1:3 cement sand mortar. |
| 8 | Excavation of soil using hydraulic Excavator and tippers I/C cutting and loading in tippers and transporting to the embankments location with all lifts and leads. |
| 9 | Filling cement bags with sand sewing and laying in position within 30 meters in dry including cost of E.C bags and strings. |
| 10 | Filling cement bags with sand, sewing and laying in position within 30 meters in water including cost of E.C bags and strings. |
| 11 | Rehandlining of E/w with an avg lead 15 m for removing of ring Bandh |
| 12 | Making dewatering arrangement by pumping set 4'' *4'' (Tractor driven) |
| 13 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 14 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. |
| 15 | Supply of multipurpose synthetic Hetiv Grease. |
| 16 | Providing Advanced direction Sign Board 1200x900 mm rectangular as per IRC 67-2001 with retro reflective high intensity grade sheeting fixed over 2 mm thick alm sheet with 25x25x3mm ange complete in all respect. |
| 17 | Supply of Steel |
| 18 | Providing and fixing Stainless Steel Nut and Bolts of all sizes & length required |
| 19 | Providing & fixing in position of flat/ wedge seal including preparation of surface complete I all respects and to entire satisfaction of Engineer in charge. (ii)75mm Ø x 12 mm Th. |
| 20 | Providing of Hollow Bulb Seal & fixing in position including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge. (1)100/44 |
| 21 | Supply of multi grade mobile mobile oil |
| 22 | Supply of GI Pipe Hollow/Pipe of any Size |
| 23 | Supply of CHEQUERED PLATE |
| 24 | Commissioning and testing of Gates at site complete in all repects and to entire satisfaction of engineer-in-charge |
| 25 | Fillet welding with high strength steel rods complete in all repects and to entire satisfaction of engineer-in-charge (ii) 6 mm wide |
| 26 | Drilling/ boring hole including complete in all respects and to entire satisfaction of Engineer-in-charge (1) 0-10 mm Ø,(2) 10-20 mm Ø |
| 27 | M.S Spindle with double startor triple start threading 11' Height 1/3/4\\" dia complete (2) 1.50 to 2.50 ton capacity |
| 28 | Supply of Skin plate . |
| 29 | Dismantling of spindle hoist, central drive unit, rope drum, rack and pinion and winch machine at site complete in all respects. |
| 30 | Cranes 3 tonnes |
| 31 | Mechanical coupling of Electric motor mechanism including reduction gear with existing gate mechanism complete in all aspects. Spindle hoist system |
| 32 | Providing installation & fixing assembly/Drum Hoist machine at site complete in all respects and to entire satisfaction of engineer-in-charge.for 400 mm ø |
| 33 | Grease Nipple |
| 34 | Gate Wheel Assembly 280 Dia , 50 Wide |
| 35 | REMOVING, PROVDING, INSTALLATION AND FIXING IN POSITION EM BRAKE AT SITE COMPLETE IN ALL RESPECTS TO THE ENTIRE SATISFACTION OF EIC |
| 36 | FIXING OF COUPLING FOR COMMON SHAFT WITH SUPPLY OF SPINDLE SHAFT COUPLING RODS AND COVER COMPLETE IN ALL RESPECTS TO THE ENTIRE SATISFACTION OF EIC |
| 37 | Supply of 3 phase 1 H.P. induction motor for motorization of gates |
| 38 | PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1sq.mm (Un-sheathed) |
| 39 | PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1.5sq.mm (Un-sheathed) |
| 40 | PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 2.5sq.mm (Un-sheathed) |
| 41 | PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 4sq.mm (Un-sheathed) |
| 42 | PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 6sq.mm (Un-sheathed) |
| 43 | PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 10sq.mm (Un-sheathed) |
| 44 | PVC INSULATED PVC SHEATHED FR ROUND FLEXIBLE COPPER CONDUCTOR CABLE: Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1.5sq.mm (48/0.20mm), 2Core |
| 45 | PVC INSULATED PVC SHEATHED FR ROUND FLEXIBLE COPPER CONDUCTOR CABLE: Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 2.5sq.mm (50/0.25mm), 2Core |
| 46 | XLPE INSULATED ARMOURED CABLES (LOOSE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as perPWD General Specifications:- Overall size 25sq.mm (4Core) Armoured (Loose) |
| 47 | Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:- Modular Motor Starter 25Amp. (Two Module) |
| 48 | Supply and erection of brown bakelite sheet white glazed translucent backside painted 3mm thick (thickness not less than 3mm) on the existing metal box including cutting, fixing and connection of existing switches and sockets and other petty material etc. |
| 49 | Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Triple Pole 6-32amp. (10kA, Curve-C) |
| 50 | Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Single Pole 0.5-4amp. (10kA, CurveC) |
| 51 | Supply and erection of RCBO (Residual Current Breaker Overload) for Earth leakage, overload and short circuit protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kA as per IEC 61009 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- RCBO Four Pole 16/25amp., Sensitivity 30mA |
| 52 | Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- Heavy Gauge PVC Conduit Pipe 20mm dia. (On Surface) |
| 53 | Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- Heavy Gauge PVC Conduit Pipe 40mm dia. (On Surface) |
| 54 | Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:- PVC Flexible Pipe 20mm dia. |
| 55 | Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:- Cable Tray Size 150mm x 50mm x 50mm (2mm thick) |
| 56 | Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:- Cable Tray Size 300mm x 50mm x 50mm (2mm thick) |
| 57 | Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:- Aluminium thimble cable Core size 25 -35sq.mm |
| 58 | Supply and erection of heavy duty Copper thimbles/lugs for cable end termination duly crimped including making necessary connections etc. completely:- Copper thimble cable Core size 25 - 35sq.mm |
| 59 | Supply and erection of Porcelain Fuse Unit with Extension Strip on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc., including connections with suitable size of thimbles and bonding to the existing earth as Per PWD General Specifications :- Porcelain Fuse Unit 32Amp., 415volts |
| 60 | REMOVING DAMAGED STRUCTURAL STEEL AND STACKING CLEAR FROM WORKING SPACE BY GAS CUTTING, COMPLETE IN ALL RESPECTS TO THE ENTIRE SATISFACTION OF EIC |
| 61 | Monitoring measures: Air qulaity monitoring along Sidhwan Branch. |
| 62 | Monitoring measures: Noise qulaity monitoring along Sidhwan Branch. |
| 63 | Monitoring measures: Surface water monitoring at Sidhwan Branch, up stream and down stream |
| 64 | Monitoring measures: Ground water monitoring along Sidhwan Branch. |
| 65 | Monitoring measures: Soil monitoring along Sidhwan Branch. |
| 66 | Capacity Buliding,Awareness/Tranining Camps and housekeeping: Training of contractor staff Please Enable Macros to View BoQ information |
