|
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority :- EXECUTIVE ENGINEER PROVINCIAL DIVISION PWD B&R JALANDHAR Name of Work :- DNIT FOR REPAIR WORK OF PHYSIOLOGY, PHARMACOLONY AND PHARMACOGNOSY LAB IN GOVERNMENT POLYTECHNIC COLLEGE JALANDHAR Contract No: Civil Works Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Work Name Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | A1) REPAIR WORK OF PHYSIOLOGY, PHARMACOLONY AND PHARMACOGNOSY LAB |
| 3 | Dismantling concrete(e) Reinforced cement concrete |
| 4 | Scraping(c) Cement plaster |
| 5 | 12.5 mm thick cement plaster 1:5 |
| 6 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibratedby needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. |
| 7 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete |
| 8 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. |
| 9 | First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. |
| 10 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s lessthan 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles havepigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.)a) Size 600x600 mm |
| 11 | Providing and Laying Out Door precast designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3 (1 ordinary cement: 3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer-in-charge |
| 12 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) |
| 13 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 14 | Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position(Code : IS 2202-1 (1999):(iv) 35mm thick |
| 15 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt)ii) For shutter area above 0.50 sqm |
| 16 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. |
| 17 | Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. |
| 18 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 19 | A2) ELECTRICAL WORK |
| 20 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\\" deep for walls and CI 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- |
| 21 | (iv) Wiring 6Amp. wall socket point |
| 22 | (v) Wiring 6Amp. Plug control comprising wallsocket point |
| 23 | (vi) Wiring 16/20Amp. power plug control point |
| 24 | RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRINGSYSTEM WITH MODULAR ACCESSORIES):(x) Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- (b) Wiring Computer terminal point having 2 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16/20Amp. universalSocket (shuttered) and 2Nos. 16/20Amp. switch with indicator (Modular accessories). |
| 25 | PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitableupto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect asdesired by the Engineer-in-charge:- |
| 26 | (i) Overall size 1sq.mm (Un-sheathed) |
| 27 | (ii) Overall size 1.5sq.mm (Un-sheathed) |
| 28 | (iii) Overall size 2.5sq.mm (Un-sheathed) |
| 29 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES:Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-(xii) Heavy Gauge PVC Conduit Pipe 40mm dia. (Flushed) |
| 30 | MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breakingcapacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as perPWD General Specifications including connections with suitable size of thimbles/lugs:- |
| 31 | (ii) MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 32 | (x) MCB Triple Pole 6-32amp. (10kA, Curve-C) |
| 33 | B3) PUBLIC HEALTH |
| 34 | Sub Head-1 Internal Water Supply System |
| 35 | CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. |
| 36 | b) CPVC SDR 11 Pipe & fitting 20m mo/d |
| 37 | c) CPVC SDR 11 Pipe & fitting 25mmo/d |
| 38 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition.Size 75mm x 75mm |
| 39 | qty same as CPVC P 20mm +25 mm |
| 40 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 41 | Through wall 11.43 cm thick |
| 42 | Through wall 22.86 cm thick |
| 43 | Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. |
| 44 | 25mm i/d Brass Ball valves |
| 45 | 20 mm i/d Brass Ball valves |
| 46 | Sub Head-2 Internal & External Sewerage System |
| 47 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonagepipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. |
| 48 | Single Socket Type B |
| 49 | c) 90mm o/d SWR UPVC pipe lines laid complete |
| 50 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. |
| 51 | For 90 mm o/d pipes |
| 52 | ii) Single Tee With Door |
| 53 | v) Elbow 90 Degree (all side socketed) |
| 54 | vi) Vent Cowls |
| 55 | viii) Coupler |
| 56 | xi) Single Y-Junction |
| 57 | Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge ) |
| 58 | 90mm o/d |
| 59 | Dismantling rain water pipes of ACC/CI with clamps and specials etc. |
| 60 | Cement concrete 1:2:4 |
| 61 | a With stone ballast or shingle |
| 62 | mixing by mechanical means using concrete mixer volumetric type |
| 63 | Sub Head-3 Sanitary Installation |
| 64 | Providing and fixing in position vitreous Chinaware white laboratory sinks of approved make (to the approval of Engineer-in-charge) consisting of a pair of brackets, C.P. brass waste 40mm complete in all respect.Size 470mmx370mmx180mm |
| 65 | Size 470mmx370mmx180mm |
| 66 | Providing & fixing 15 mm C.P brass laboratory cock swan neck of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 67 | Laboratory cock swan neck One Way |
| 68 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect |
| 69 | PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut |
| 70 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 71 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect |
| 72 | C.P.brass 15mm Angle valve without flange |
| 73 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. |
| 74 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect. |
| 75 | C.P. Brass extension piece, 25mm long to 50mm long |
| 76 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete inall respect. |
| 77 | Providing and fixing in position SS Gratingwith frame of approved make (to the approval of engineer in charge) complete in allrespects |
| 78 | Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. |
| 79 | Wash Hand Basin / Urinal Pot |
| 80 | CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap |
| 81 | P/F Manifold with Fittings with 10 point (1/2'') |
| 82 | P/F NRV |
| 83 | P/F SS Female Threaded Adoptor (20mm X 1/2'') |
| 84 | P/F Gas Pipeline (LPG)- MS Pipe -B Class With heavy Fittings(1/2'') |
| 85 | P/F Gas valve,Screwed Main (15mm) |
| 86 | P/F LPG pipeline for Burner(1/2'') |
| 87 | P/F Pressure Gauge |
| 88 | P/F Clamp (1/2'') |
| 89 | P/F Pre Set Regulator (1/2'') |
| 90 | P/F Ball valve(1/2'') |
| 91 | P/F Line Filter Valve (1'') |
| 92 | P/F MS Burner Total in Figures 1266817.0 1266817.0 INR Twelve Lakh Sixty Six Thousand Eight Hundred & Seventeen Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
