|
| 1 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws and 4 mm glass panes glaze all complete as per direction of Engineer-in-charge |
| 2 | Supplying and fixing glass panes with putty and nails Plain Glass 4 mm thick |
| 3 | Providing and fixing oxidized M.S sliding door bolts or dyed to required colour and shade with necessary screwsetc, within all leads and lifts as per directions of Engineer in charges |
| 4 | 300 X 16 mm size |
| 5 | Providing and fixing aluminium tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete. The rate is inclusive for including carriage of materials within all leads, lifts and other incidentals. |
| 6 | 150 X 10 mm size |
| 7 | Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etc. completed within all leads, lifts of materials and other incidentals. |
| 8 | 125 mm size |
| 9 | Providing and fixing aluminium door stoper with rubber cushion 100mm within all leads and Ifits |
| 10 | Proviidng and fixing brigh finished M.S. hooks and eyes 10mm within all leads and lifts as per directions o fEngineer in charge |
| 11 | Providing and fixing square edges cover fillets (beading) 19 x 6 mm section i/c mitring at junctions with wood screws and nails complete. In 1st. Class D/Wood including carriage of all labour equipment and material to various location through all modes within all leads and lifts |
| 12 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified b the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in al colours and shade, laid on 20 mm thick bcement concrete mortar 1:4 (1 cement: 4 coarse sand) jointing with gre cement slurry @ 3.3 15 kg/sqm including the jointing the joints with white cement and matching pigments etc complete size of tile 600 mm X 600 |
| 13 | Providing and laying vitrified tiles in dado of different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shade, laid over 20 mm thick cement concrete mortar 1:4 (1 cement: 4 coarse sand) jointing with gre cement slurry @3.3 kg/sqm including the jointing the joints with white cement and matching pigments etc complete |
| 14 | Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughl cleaning oil greases, dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete. For steel HYSD bars already projecting over slab |
| 15 | Painting two coats (excluding priming coat)on new steel and other metel surfaces under coat with ready 12 mixed paint brushing to give an even shade i/c cleaning the surface all dirt, dust and other foreign matter with ready mixed paint other than white including carriage of all labour equipment and materia |
| 16 | Painting two coats (excluding priming coat) on wood and wood based surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters with enamel paint other than white as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. |
| 17 | Providing and laying chakka floor tiles in different sizes (thickness to be specified b the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make in al colours and shade, laid on 20 mm thick cement concrete mortar 1:4 (1 cement: 4 coarse sand) jointing with gre cement slurry @ 3.3 kg/sqm including the jointing the joints with white cement and matching pigments etc complete size of tile 300 mm X 300 mm. |
| 18 | Steel work welded in built up sections, trusses and framed work, including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials within all leads and lifts :- |
| 19 | In gratings, framed, guards, bars ladders and railing, brackets and similar works :- |
| 20 | Providing and fixing on wall face unplasticised-PVC moulded fittings/ accessories for unplasticised Rigid PVC pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382 (i) Single socketed pipes. 110 mm dia. |
| 21 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C grade PCC 1:4:8 Please Enable Macros to View BoQ information |
