Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated earth at approved dumping site by mechanically & manual upto all lead & lift as per direction of Engineer incharge dumping site/disposal site shall be arranged by the contractor at his own cost and nothing shall be paid extra. All kinds of soil |
| 2 | Pipes, cables etc, not exceeding 80 mm dia. |
| 3 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 4 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, at approved dumping site by mechanically & manual upto all lead & lift as per direction of Engineer incharge dumping site/disposal site shall be arranged by the contractor at his own cost and nothing shall be paid extra. |
| 5 | All kinds of soil |
| 6 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish at approved dumping site by mechanically & manual upto all lead & lift as per direction of Engineer incharge dumping site/disposal site shall be arranged by the contractor at his own cost and nothing shall be paid extra. |
| 7 | Clearing grass and removal of the rubbish at approved dumping site by mechanically & manual upto all lead & lift as per direction of Engineer incharge dumping site/disposal site shall be arranged by the contractor at his own cost and nothing shall be paid extra. |
| 8 | Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions,at approved dumping site by mechanically & manual upto all lead & lift as per direction of Engineer incharge dumping site/disposal site shall be arranged by the contractor at his own cost and nothing shall be paid extra. |
| 9 | All kinds of soil |
| 10 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth at approved dumping site by mechanically & manual upto all lead & lift as per direction of Engineer incharge dumping site/disposal site shall be arranged by the contractor at his own cost and nothing shall be paid extra. |
| 11 | All kinds of soil |
| 12 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth at approved dumping site by mechanically & manual upto all lead & lift as per direction of Engineer incharge dumping site/disposal site shall be arranged by the contractor at his own cost and nothing shall be paid extra. |
| 13 | Ordinary rock |
| 14 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated earth at approved dumping site by mechanically & manual upto all lead & lift as per direction of Engineer incharge dumping site/disposal site shall be arranged by the contractor at he own cost and nothing shall be paid extra. |
| 15 | All kinds of soil. |
| 16 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated earth at approved dumping site by mechanically & manual upto all lead & lift as per direction of Engineer incharge dumping site/disposal site shall be arranged by the contractor at he own cost and nothing shall be paid extra. |
| 17 | Ordinary rock |
| 18 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering,including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 19 | Stone /Boulder filling under floor dry hand packed including carriage of material upto all leads and lifts and as per direction of Engineer incharge |
| 20 | Providing and injecting chemical emulsion for pre-constructional anti-termite treatment and creating a chemical barrier under and all-round the column pits, wall trenches, excavation upto basement level, top surface of plinth filling, junction of wall and floor along the external perimeter of building, expansion joints, surroundings of pipes and conduits etc. including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 21 | With Chlorpyriphos / Landane E.C. 20% with 1% concentration. |
| 22 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering including carriage of material upto all leads and lifts and as per direction of Engineer incharge. - All work up to plinth level : |
| 23 | 1:2:4 (1 Cement : 2 coarse sand) : 4 graded stone aggregate 40 mm nominal size) |
| 24 | 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) |
| 25 | 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) |
| 26 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20mm nominal size) including carriage of material upto all leads and lifts and as per direction of Engineer in charge.. |
| 27 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 28 | Centering and shuttering including strutting, propping etc. and removal of form for including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 29 | Foundations, footings, bases of columns, etc. for mass concrete |
| 30 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 31 | Suspended floors, roofs, landings, balconies and access platform |
| 32 | Shelves (Cast in situ) |
| 33 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 34 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 35 | Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.6m, for every additional height of 1 metre or part thereof (Plan area to be measured) including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 36 | Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) |
| 37 | Edges of slabs and breaks in floors and walls |
| 38 | Under 20 cm wide |
| 39 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level including carriage of material upto all leads and lifts and as per direction of Engineer in charge.(TATA, Sail,Jindal) |
| 40 | Thermo-Mechanically Treated bars of grade Fe-550 or more. |
| 41 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level including carriage of material upto all leads and lifts and as per direction of Engineer in charge.(TATA, Sail,Jindal) |
| 42 | Thermo-Mechanically Treated bars of grade Fe-550 or more. |
| 43 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 44 | All works upto plinth level |
| 45 | All works above plinth level upto floor V level |
| 46 | Extra for providing richer mixes at all floor levels including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 47 | Providing M-30 grade concrete instead of M-25 grade BMC/ RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum) |
| 48 | Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design including carriage of material upto all leads and lifts and as per direction of Engineer in charge. (Material shall confirm to ASTM 6063). |
| 49 | Floor Joint of 100 mm gap |
| 50 | Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates asper ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement including carriage of material upto all leads and lifts and as per direction of Engineer in charge. (Material shall confirm to ASTM 6063.) |
| 51 | Roof Joint of 100 mm gap |
| 52 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement including carriage of material upto all leads and lifts and as per direction of Engineer in charge - All work up to plinth level : |
| 53 | 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) |
| 54 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 55 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 56 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 57 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 58 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 59 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 60 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 61 | Random rubble masonry with hard stone/Local khad Stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 62 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 63 | Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 64 | Providing and laying autoclaved aerated cement blocks masonry with 150mm/200mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge. (The payment of RCC band and reinforcement shall be made not to be paid for seperately). |
| 65 | Designing ,Supply, Testing ,Installation and Commissioning of 100 mm thick Manual sliding folding partition for 20 mtr. long length (with 16-17 equal panel of width within 1150 mm to 1200 mm and height up to false ceiling level/Track Bottom)/ roof Beam make of AZOZ/PANGLOBAL/ACCOFIX or approved equivalent, and having sound insulation of 50 dB as per manufacturer's specifications with following components:(Approx Slab/Beam Bottom Height-15 mtr. fittings, and accessories, removable handle for operations, manufacturer's warranty for operable Walls against faulty workmanship and materials for a minimum period of M24 onths, all complete as per manufacturer's specifications, drawings, tender specifications and direction of Engineer-In-Charge. Partition system: The partition system comprises of Series of individual flat panels, manually operated, top supported with retractable top and bottom seals, travelling along a ceiling track and assembled to form a solid acoustic sliding/collapsible wall. Each 100mm thick panel shall consist of welded internal steel frame. Each panel shall be fabricated with 1.2 mm steel resiliently secured to the tubular frames with appropriate insulation to achieve specified Noise Reduction Class. Provide the entire panel fabrication and is non-combustible, dimensionally stable, with no protruding parts. The void inside the panel should be filled with 96 kg/m3 rock wool in the cavity. The panels are to be clad on both sides with high quality MDF board. MDF board thickness is nominal 14.5mm thick except otherwise stated when incorporate with other finishing materials. Tongue and groove's vertical side's aluminum strip fitted with double acoustical seals. The panel is designed to be suspended and center-hung by high grade steel hall bearing encased with DuPont delrin polyformaldehyde (POM) material. Open centrally & sliding to ends. Acoustic Sealing: Panel has manually operated top and bottom retractable seals. Vertical seals: Panels consist of natural anodized aluminum tongue and groove elements, which incorporate multi-fin acoustic gaskets and no fasteners shall be visible on panel face when the wall is in extended position. The tongue and groove vertical intersection must be sealed with no less than three vertical layers high quality black polymeric coating resin EVA with proper sealing . ii )Horizontal seals Top and bottom of the panel are fitted with multi-fin acoustic seals, with a deflection of standard 10mm to be compensated by multiple cranking Scissor-jack system. The force of the expanding seals shall be no less than 2.0KN. iii) Top and Bottom Pins -Top and bottom pins must be extended and retracted by one cranking motion. Suspension & Tracking System: The track and other suspension members shall be designed to accommodate panel loads including the specified applied finished. Each panel shall be the facility for height adjustment without having to open up the ceiling panels after the ceiling is closed. Track shall be secured to the building structure and/or suspension structure by adjustable bolts. All necessary transfer and storage tracks shall be included The track is to be supported by adjustable steel hanger bracket All work executed on site including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 66 | Providing and laying 18 mm thick External cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand) including hacking the surfaces, scaffolding, curing, making grooves at desired location etc. complete as per drawing including carriage all lead & lift as per direction of Engineer in charge. |
| 67 | Providing and laying 12 to 15 mm thick cement mortar plaster in 1:4 ratio (1 cement : 4 fine and coarse sand mixed in equal proportions) on internal surfaces of masonry and RCC walls, columns, etc., finished smooth as per specifications. The work shall include thorough surface preparation such as hacking, cleaning, erection and removal of scaffolding, curing, and forming grooves at specified locations as per drawings. The rate shall include all materials, labour, scaffolding, curing, carriage with all lead and lift, tools, and equipment necessary to complete the work in all respectsincluding carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 68 | 1:4 (1 cement: 4 fine sand) |
| 69 | Providing and laying cement plaster in 1:3 (cement : sand) ratio mixed with approved Fosroc waterproofing compound as per manufacturer’s specifications over RCC basement walls, finished with a floating coat of neat cement slurry to achieve a smooth and waterproof surface. The work includes surface preparation such as cleaning, hacking of RCC surface, erection and dismantling of scaffolding, curing, and forming grooves at specified locations as per drawings. The rate shall be applicable at all heights and depths, including the cost of all materials (including Fosroc waterproofing compound), labour, tools, scaffolding, lead, lift, and all incidental charges, complete in all respects including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 70 | 12 mm cement plaster |
| 71 | Providing and applying 12 mm thick cement plaster in 1:3 (cement : coarse sand) mix, mixed with approved waterproofing compound of Fosroc make as per manufacturer’s instructions, on the internal surfaces of RCC water tank walls, finished with rough finish at locations as directed and smooth finish with a floating coat of neat cement at specified areas. The work shall include all necessary surface preparation such as hacking, cleaning, scaffolding, curing, and finishing, carried out strictly including carriage of material upto all leads and lifts and as per direction of Engineer in charge. The rate shall include all labour, materials (including waterproofing compound), tools, scaffolding, curing, and equipment required to complete the work at all heights and locations. |
| 72 | 1:3 (1 cement: 3 fine sand) |
| 73 | 18 mm thick moulded cement mortar band in two coats under layer 12 mm thick with cement mortar 1:5 (1 cement : 5 coarse sand) top layer 6 mm thick with cement mortar 1:4 (1 cement : 4 fine sand) including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 74 | Providing and applying 6mm thick plaster to RCC slab in cement mortar 1:3 (1 cement : 3 fine and coarse sand in equal proportion) finished smooth including hacking the surfaces, scaffolding, curing, making grooves at desired location etc. complete as per drawing.complete as per drawing including carriage all lead & lift as per direction of Engineer in charge. |
| 75 | 1:3 (1 cement : 3 fine sand) |
| 76 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete Including Scafolding Complete for all levels including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 77 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levelsincluding carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 78 | Area of slab over 0.50 sqm |
| 79 | Providing and fixing dry cladding For All heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing including carriage of material upto all leads and lifts and as per direction of Engineer in charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately). |
| 80 | Natural sand stone - 30mm thick gang saw cut stone |
| 81 | Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineer- in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid) including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 82 | Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 83 | Providing and fixing Stone mid night Black Slate Wall Cladding Tiles (thickness to be specified by the manufacturer), of approved make, in all colours, shades,with surface finish Gloss, Natural, Matt & any size as approved by Engineer in-Charge, in Exterior and Interior Wall Tiles , over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 84 | Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 85 | 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore,Black & Grey etc. |
| 86 | Providing and applying three or more coats Emulsion Paint and shade to give a smooth finish on new plastered surfaces over a coat of approved primer including the cost of preparing the surfaces with filling materials (putty), along with sand preparing wherever required, scaffolding etc. complete for all Heights and level including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 87 | Two or more coats on new work |
| 88 | Finishing walls with exterior Approved paint of required shade : wherever required, scaffolding etc. complete for all Heights and level including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 89 | New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 90 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in walls,skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete for all heights and levels including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 91 | Providing and laying Vitrified Wall tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in walls ,skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints Complete for all heights and levels including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 92 | Size of Tile 600x600 mm |
| 93 | Polishing two coats with lecquer polish on wood and wood based surfaces to give an even surface including cleaning the surface of all dirt , dust and sand papered smooth and including a coat of wood filler. Including carriage of material in all lead and lifts complete as per direction of Engineer in charge for all Desired location and levels. |
| 94 | Providing, making and fixing in position selected woods in frames etc. of doors, windows, ventilators made to size and shape as shown in drawing, with mitered joints fixed with adhesive, as directed including making necessary grooves, chamfering etc. including applying water proof wood primer and 2 coats of termite proof paint on concealed surfaces, etc. complete as per detailed drawings complete as per drawing for all levels including carriage of material upto all leads and lifts and as per direction of Engineer in charge.. |
| 95 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick complete for all levels including carriage of material upto all leads and lifts and as per direction of Engineer in charge.. |
| 96 | Second class teak wood |
| 97 | Providing and fixing of float glass panes of 5 mm thickness including all accessories complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 98 | 5.0 mm thick glass panes (weight not less than 12.5 kg per sqm) |
| 99 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap,all accessories & providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings complete scafolding & fixing at all heights including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 100 | Providing and fixing 100x8mm teak wood moulded beading to door and window frame with iron screws plugs and priming coat on unexposed surface etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 101 | Providing & fixing 35 mm thick hinged flush door shutters of approved quality and make non decorative or Decorative type core of block board construction with internal frame of hard wood, including providing and fixing,Seasoned hard wooden lipping all around and all door harware including hings, complete as per specification with both side laminate as per design & drawing including carriage of material upto all leads and lifts and as per direction of Engineer in charge.. |
| 102 | 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. including supply and fixing of all required hardware such as handles, locks, tower bolts, stoppers, etc., complete.\\" Stickers indicating the locations of hardware will be pasted at appropriate places including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 103 | Providing and fixing granite/stone coping over walls as per approved design and drawings, including preparation of surface and laying in cement mortar 1:3 (1 part cement : 3 parts coarse sand). The item includes cutting to size, edge chamfering, nosing as per drawing, and joint pointing with neat cement slurry mixed with approved pigment matching the stone shade. The scope further includes finishing, curing, rubbing, polishing, and all incidental works required for completion. All tools, labour, materials, transportation, scaffolding, equipment, and workmanship required to complete the job are included in the contractor’s scope. The item shall be completed in all respects, including carriage of material upto all leads and lifts and as per direction of Engineer in charge.. |
| 104 | 40 mm thk. Polished Black Granite |
| 105 | Providing and fixing bright finished brass door latch with necessary screws etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge. : |
| 106 | 300x16x5 mm |
| 107 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge.. |
| 108 | Providing and fixing bright finished Stainless Steel Cylindrical Locks – Keyless type (suitable for bathrooms), of approved make such as Godrej Cat. No. 9843 or equivalent, including necessary screws, fittings, and accessories for proper installation. The lock shall be of high-quality SS construction, corrosion resistant, and suitable for domestic or commercial use. Complete in all respects including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 109 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge.. |
| 110 | 125 mm |
| 111 | 100mm |
| 112 | Providing and fixing bright finished brass handles with screws etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 113 | 125 mm |
| 114 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge.. |
| 115 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge.. |
| 116 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 117 | 250x10 mm |
| 118 | 100x10 mm |
| 119 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge. (Door handle, lock and stopper etc not to be paid separately). |
| 120 | Providing and fixing spider glass lock with stainless steel (SS) finish, suitable for frameless glass doors, having one side key operation and one side knob (Model No. GDLO2R), including all necessary fittings, screws, and accessories for proper installation as per manufacturer’s specifications including carriage of material upto all leads and lifts and as per direction of Engineer in charge.. |
| 121 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete including all hardware as per approved drawing including carriage of material upto all leads and lifts and as per direction of Engineer in charge. (Single / double glass panes and silicon sealant shall be paid separately) |
| 122 | Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) |
| 123 | Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm). |
| 124 | Providing and Fixing factory made uPVC door frame,&Frame work in Window made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification including carriage of material upto all leads and lifts and as per direction of Engineer in charge.. |
| 125 | Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made including carriage of material upto all leads and lifts and as per direction of Engineer in charge.. |
| 126 | Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) |
| 127 | Three track three panels sliding door made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) |
| 128 | Providing & applying Plaster of Paris (gypsum anhydrous) suspended false ceiling up to any height above floor level, including fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive). Consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts. Other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size. The other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm, at 450 mm centre to centre.This shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval and reinforced with rabbit wire mesh of 100mmx16mm gauge fixed to frame all complete any type of design/drawing including carriage of material upto all leads and lifts and as per direction of Engineer in charge.. |
| 129 | Providing & fixing 3mm thick Vinyl sheet for flooring confirming to IS 3462-1986 of Armstrong/ Atco make & colour/pattern for gym flooring and any other specified area in correct level / slope at all levels as per architectural drawings and manufacturer's specifications & instructions. Vinyl shall be fixed with approved adhesive properly, avoid bubbles in flooring including cleaning the surface, pressing the vinyl by appropriate roller properly, cutting and filling/ welding the joints by approved and matching colour welding rod properly etc. completed as per the instructions of the EIC. Joints shall be finished properly so that area shall look Continuously and joint less. (Mode of measurements : Area of Vinyl flooring shall be measured for payment) all complete for all levels and height including carriage of material upto all leads and lifts and as per direction of Engineer in charge. . |
| 130 | Providing and fixing Carpet Flooring using Broadloom (Roll type) carpet of approved make, shade and pattern and of the following specification: Tufted cut pile, 1/10 gauge with 100% Polyamide Millitron/ 6 Crealon (R) nylon/ SD Nylon pile or equivalent material having minimum surface pile thickness of 5.3 mm and minimum total thickness of 7.1 mm with Contract Latex backing/ 'Weave back (R) backing/ Woven Polypropylene backing, min. tufts of 201500 per sqm and minimum total carpet weight of 2300 g/sqm, minimum pile yarn weight of 1200 g/sqm, minimum surface pile density of 0.141 g/ cucm having inbuilt anti-soiling protection, suitable for commercial-heavy use areas like auditorium application, having acoustical insulation value of 31 dB, CE labeled, EC certified, fulfilling Fire Classifications EN 13501-1 euro class and approved by Green Label Plus test for indoor hygiene in standard length and width including carriage of material upto all leads and lifts and as per direction of Engineer in charge.. |
| 131 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings including carriage of material upto all leads and lifts and as per direction of Engineer in charge.. |
| 132 | 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing. |
| 133 | Providing and Fixing Wooden false Ceiling comprising of a Galvanized MS frame as required covered with 12 mm thick Marine ply, followed by 6 mm premium quality MDF for making groove and finished with a natural veneer (as approved) of 3.5 mm thickness duly Spirit polished with 2 no. melamine matt coating. The ceiling shall be fixed to the roof soffit with adequate suspenders. The item shall be inclusive of cutting & making cutouts for lights, diffusers etc all complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge.. |
| 134 | Providing and fixing 2nd class teak wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface including carriage of material upto all leads and lifts and as per direction of Engineer in charge.. |
| 135 | 20 mm thick |
| 136 | Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge.. |
| 137 | 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc. |
| 138 | Providing & laying IPS flooring (as base for Vinyle flooring and wooden flooring) or any other location as specified by EIC of various thickness with cement concrete nominal mix of proportion 1:2:4 (cement : Sand : Aggregate) in correct level / slope at all levels as per architectural drawings including mixing of concrete in mixer, lifting, shifting to the work location, compacting / vibrating, finishing smooth to the satisfaction of the EIC, curing, and cleaning the surface etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge. (Mode of measurements :Plan area of Flooring shall be measured for payment). |
| 139 | 40mm thick with 20mm nominal size stone aggregate |
| 140 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all completeincluding carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 141 | Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 142 | Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with, all levels & height, all floors including carriage of material upto all leads and lifts and as per direction of Engineer in charge . |
| 143 | Makrana white second quality |
| 144 | Black Zebra |
| 145 | Udaipur green marble |
| 146 | Extra for pre finished nosing to treads of steps of marble stone including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 147 | Providing and fixing minimum 14mm thick engineered wooden flooring of approved make, shade and pattern. The planks shall be of size 1200 mm x 200/125 mm. The planks shall be placed on an underlay of 0.2 mm thick alkali resistant Polyethylene sheet having density 920-935 kg/ m3 to resist moisture from the sub floor and to secure the floor installation etc all complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 148 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints . all levels & height, all floors including carriage of material upto all leads and lifts and as per direction of Engineer in charge . |
| 149 | Size of Tile 600x600 mm |
| 150 | Size of Tile 800x800 mm |
| 151 | Size of Tile 1000x1000 mm |
| 152 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment..(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer- in-charge.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer- in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 153 | With average thickness of 120 mm and minimum thickness at khurra as 65 mm. |
| 154 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.(The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry) including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 155 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks,swimming pool, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete. The product performance shall carry guarantee for 10 years against any leakage including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 156 | For vertical surface two coats @ 0.70 kg per sqm |
| 157 | For horizontal surface one coat @1.10 kg per sqm. |
| 158 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 159 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 160 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer complete for all heights,levels including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 161 | M.S. tube |
| 162 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete for all heights including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 163 | Hot finished welded type tubes |
| 164 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete for all heights including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 165 | On steel work |
| 166 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : complete for all heights &levelsincluding carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 167 | 25 mm thick |
| 168 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 169 | Providing and fixing 15 cm wide, 45 cm overall semi-circular Plain Prepainted G.I. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete for all heights as per drawingincluding carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 170 | 0.60 mm thick |
| 171 | Providing and fixing 0.60mm thick prepainted corrugated G.I sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5microns over 5 microns primer coating i/c fixing with prepainted iron Jor L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 172 | Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted G.I sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 173 | Providing and fixing M.S BP Sheet 1.66mm to 2mm thick (Tata/SAIL or Jindal make) in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer completeincluding carriage of material upto all leads and lifts and as per direction of Engineer in charge (Tata Make/century) |
| 174 | Supply & installation of wall panelling made of 12 mm thick pinewood , veneer laminated finish, groove perforated installed by using Strut framework system. Slats to be backed with Synthethik PF 10x25 adhered to wall with stick .The Panneling shall be finished as per the drawings and to the satisfaction of the Engineer in charge. All the support system shall be as per the Approved make list and the suspension system shall be got approved before starting installation at site including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 175 | Providing and fixing Decorative Wall Paper on wall etc with approved adhesive as approved. in any shape, length etc.Including preparing surface for Wall paper. (Rate to include wastage due to shape) including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 176 | Providing and fixing factory-made modular toilet cubicles using 12mm thick GREENPLY BOILO compact laminate in approved colour, with door size 600mm x 2005mm and overall height 2005mm, complete with all accessories in Stainless Steel (316 grade) and Aluminium including adjustable foot, gravity hinges (right/left), coat hook with door stopper, door knob, lockset with occupancy indicator, aluminium door stoppers, aluminium top rail (1 metre), aluminium U-channel, screws, wall plugs, noise-deadening tapes, and L clamps. The work includes supply, installation, and all necessary fittings, fixtures, hardware, labour, materials, tools, and transportation for all heights as per the direction of Engineer-in-Charge. The system shall carry 10 years warranty against moisture-related defects in panels and 3 years warranty for hardware and workmanship against any manufacturing defect. All work to be executed as per specifications and to the completeincluding carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 177 | Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits complete for all Heights including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 178 | 50 mm thick |
| 179 | Providing and laying Glass Mosaic Tiles flooring in all approved colours and designs as per architectural drawings, over 25 mm thick average cement mortar bed in 1:4 mix (1 cement : 4 coarse sand), finished with a top layer of white cement slurry. The item includes laying of tiles, grouting of joints with cement mixed with matching pigments, preparation of base surface, necessary cutting, pattern making with grooves as per design, cleaning, rubbing, and final polishing of the surface. The rate shall be inclusive of cost of materials, labour, white cement, all tools, equipment, scaffolding, curing, and all incidental charges including all lead, lift, levels, and heights as directed by Engineer-in-Charge, complete in all respects as per drawing and design. |
| 180 | 50 X50X4mm Mosaic tiles (floor) |
| 181 | Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 182 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 183 | Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 184 | With 20x20 mm square bar |
| 185 | Supplying and fixing C.I. cover without frame for manholes :560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg including carriage of material upto all leads and lifts and as per direction of Engineer in charge |
| 186 | Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12(D=100 mm with tolerance of ±2%), Zinic+10% Al alloy+PVC coated, Mesh wire diameter 2.7/3.7mm (ID/OD), mechanically edged/ selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm(ID/OD), supplied @3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all completeincluding carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 187 | Providing and laying weep holes using 100mm diameter PVC pipes extending through the full width of the structure, laid with a slope of 1V:20H towards the draining face to ensure proper discharge of water. The item includes supply of approved quality PVC pipe, cutting, placing, aligning to the specified slope, and securing in position, complete with all materials, labour, tools, transportation, and carriage, etc., as required for proper execution of work. Complete in all respects including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 188 | Providing and fixing a tensile shed with MS frame structure, comprising 900 GSM thick tensile fabric (Mehler make, Germany) securely fixed over a structural framework. The MS pillars shall be 6” round pipes with a minimum thickness of 3.5 mm, supporting the top roof structure made of 3” round pipes with 60 mm OD pipe purlins for additional support and tie rods. All steel pipes used shall be of Apollo or Tata make. The entire structure will be treated with Duco primer and finished with paint for corrosion protection and durability. Any civil works required for the installation will be carried out by the contractor. Necessary scaffolding or stair access will also be provided by the contractor. The structural area measurement shall be based on the surface area of the top roof including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 189 | Providing and fixing in position 12mm thick bitumen impregnated fiber board conforming to IS: 1838, including cost of primer, sealing compound Grade-A in expansion joints.complete at desired location including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 190 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 191 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 192 | With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 |
| 193 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 194 | Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 195 | 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. |
| 196 | Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 197 | On bituminous surface @ 0.25kg/sqm |
| 198 | Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 199 | 25 mm compacted thickness with bitumen of grade VG- 30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. |
| 200 | Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade VG - 10 and blinding surface with 0.90 cum of stone aggregate of 6.7 mm size (Passing 11.2 mm sieve and retained on 2.36 mm sieve) per 100 sqm of road surface, including rolling and finishing with power road roller all complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 201 | Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 202 | Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm |
| 203 | Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm |
| 204 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 205 | Providing and fixing post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 206 | Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 207 | Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 208 | New work (Two or more coats) |
| 209 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required completeincluding carriage of material upto all leads and lifts and as per direction of Engineer in charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 210 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per MoSRT&H Technical Specification clause 502 including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 211 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 212 | Providing and fixing local stone cobbles of size 100 mm x 100 mm x 100 mm as per approved drawing, design, and specifications in the required pattern. The cobbles shall be fixed over a cement mortar bed of mix 1:3 (1 cement : 3 sand) and joints shall be filled and bedded with cement slurry to ensure proper bonding and finish including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 213 | Supplying and stacking at site including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 214 | 90 mm to 45 mm size stone aggregate |
| 215 | 63 mm to 45 mm size stone aggregate |
| 216 | 53 mm to 22.4 mm size stone aggregate |
| 217 | Landscaping:- Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 218 | All kinds of soil |
| 219 | Supplying and stacking of good earth at site including royalty including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 220 | Good earth |
| 221 | Supplying and stacking at site dump manure from approved sources (duly screened through specified sieve)including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 222 | Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation including carriage of material upto all leads and lifts and as per direction of Engineer in charge. |
| 223 | Spreading sludge dump manure or/and good earth in required thickness (cost of sludge, dump manure or/and good earth to be paid separately). |
| 224 | Mixing earth and sludge or manure in proportion specified or directed. |
| 225 | Grassing with 'Selection Grade-1 including watering and maintenance of the Lawn for 30 days or more till the grass from a thick lawn free from weeds and fit for moving including supplying good earth if needed including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 226 | In rows 15 cm. Apart in either direction. |
| 227 | In rows 7.5 cm. Apart in either direction. |
| 228 | In rows 5 cm. Apart in either direction. |
| 229 | Preparation of beds for hedging and shrubbery by excavating upto 1.5 metre depth and trenching the excavated base to a further depth of 30cm. Refilling the excavated earth after breaking clods and mixing with sludge or manureia the ratio 8:1 (8 parts of stacked. volume of earth after reduction by 20% : 1 part of stacked volume of sludge or manure after reduction by 8% flooding with water, filling with earth if necessary, watering and finally fine dressing levelling etc. including stacking and disposal of materials declared un-serviceable and surplus earth by spreading and levelling as directed with in a lead of 20 metres and lift upto 1.5 metre complete. Notes:- Earth work in excavation to be paid vide item no 07040000 depending upon classification of soil. ii) Cost of sludge, manure or extra earth to be paid for separately including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 230 | Digging holes to specified/standard size of pit for plantation in soil and stacking the excavated soil near by the pits and then refilling the same with the excavated earth/good earth mixed with manure in the ratio of 2:1 by volume (2 parts of stacked volume of earth after eduction by 20% 1 part of stacked volume of manure after deduction by 8% flooding with water dressing etc. complete as per requirement and direction of Engineer in charge including cost and carriage of good earth and manure up to all lead and lift through manual &mechanical means |
| 231 | Half brick circular tree guard in second class bricks, internal diametre 1.25m, and height 1.20m. above ground and 0.20m. Below ground bottom two courses laid dry and top three courses in cement mortar 1:6 (1 cement : 6 sand) and the intermediate courses being in dry honey comb masonry as per design complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge.. |
| 232 | Providing and fixing M.S. Flat iron tree guard 60 cm. Dia, and 2 metre high above ground level, formed of 4 Nos. 25x6mm.and 8 Nos. 25x6mm vertical M.S. Flats riveted to 3 Nos. 25x6mm M.S. flat iron rings in two halves, bolted together with 8 mm. Dia and 30mm. Long bolts including painting two coats with paint of approved brand and manufacture over a coast of priming complete in all respects including carriage of material up to all leads and lifts and as per direction of Engineer in charge.. |
| 233 | Edging with second class bricks laid dry length-wise including excavation refilling, consolidating with hand packing and spreading neatly surplus earth including carriage of material up to all leads and lifts and as per direction of Engineer in charge. . |
| 234 | Filling of earth work and sludge or manure in the desired proportion in trenches, flooding with water and levelling of supplying earth and sludge or manure and mixing excluded including carriage of material up to all leads and lifts and as per direction of Engineer in charge.. |
| 235 | Supplying and planting of following trees category A of the given sampling including take proper care and necessary maintanance for a period of four months from the date of planting complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge.. |
| 236 | Bottle brush |
| 237 | Silver Oak |
| 238 | Mountain Ebony |
| 239 | Dahlia (Multicoloured) |
| 240 | Supplying and planting of shrubs/Hedges as approved including take proper care and necessary maintanance for a period of four months from the date of planting complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge.. |
| 241 | Providing and fixing RCC M-30 sitting Benches of following specifications at various places including carriage of materials up to all lead and lift as per direction of Engineer in charge.Specifications:- (Length 1.20m, Seating height-0.45m & Total height -1.0m). Each bench consists of 2nos L shape base support 100mm thick,3 nos RCC planks (2Nos-1200mmx100x50mm &1 No1200x200x50mm) fixed with galvanised nuts and bolts of suitable size. Top & back planks shall be treated with special anticorrosive water proof coating. |
| 242 | Providing and fixing Open Top Quatro Recycle Bin (3-tier type) having three separate compartments of 50 litres capacity each, made of stainless steel (grade as per approved specifications), suitable for commercial use, of open top design, corrosion-resistant and finished as per direction of Engineer-in-Charge, including supply of all materials, transportation to site with all leads and lifts, installation at designated location with all required accessories and fixtures, all complete as per drawings, specifications including carriage of material up to all leads and lifts and as per direction of Engineer in charge.. |
| 243 | Providing Retro-reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects including carriage of material up to all leads and lifts and as per direction of Engineer in charge.. |
| 244 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D- 2.5, including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 245 | Rectangular shape 900x900 mm internal dimensions |
| 246 | Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design including carriage of material up to all leads and lifts and as per direction of Engineer in charge. : |
| 247 | With 20 mm diameter round bar |
| 248 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including carriage of material up to all leads and lifts and as per direction of Engineer in charge.. |
| 249 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge.. |
| 250 | 40 mm thick with 20 mm nominal size stone aggregate |
| 251 | Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-30, of size 1000x700x100mm as per drawing , reinforced with T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge. . |
| 252 | Providing and fixing a tensile fabric cone-shaped gazebo kiosk with MS frame structure, including all civil works such as pillar foundations and base preparation. The MS pillars shall be 4” square pipes, supporting a top roof structure made of 4” square pipe frames with 3” round pipe purlins for central support. Side curtains and fixed fabric shall be either 800 GSM blackout fabric or 900 GSM translucent fabric with clear glass fabric as per design requirements. All structural steel shall be treated with Duco primer and finished with Duco paint, providing a 15-year warranty on the entire installation. The area measurement will be as per specifications with an additional 30% extra charge for the center cone-shaped elevation. The scope includes carriage of materials, all leads and lifts, scaffolding, labor, supervision, and execution including carriage of material up to all leads and lifts and as per direction of Engineer in charge.. |
| 253 | Providing and fixing a 5 ft high white Buddha fiber statue (height of statue above platform 5 feet) installed on a circular marble or granite platform measuring 3.60 m x 2.40 m in plan with a height of 1.15 m above ground level. The work includes transportation of the statue and platform materials to site, all necessary civil works for platform preparation and leveling, secure installation of the statue on the platform, and finishing to ensure stability and aesthetic presentation. All works shall be carried out as per the directions of the Engineer-in-Charge, including labor, tools, scaffolding, and supervision, complete in all respects including carriage of material up to all leads and lifts and as per direction of Engineer in charge.. |
| 254 | Flag mast pole 111 meter High :-Manufacturing ,Supplying ,installation & testing of 111 Meter height Monumental National Flag Mast, Mast shaft shall be in three sections, hot dip galvanized and suitable for windvelocity confirming to IS 875, the shaft shall be PU painted (Polyurethane) with a coating of each primer, primer and PU paint with all contractor's materials, all accessories, labour, lead, lift, transportation, loading, unloading, all taxes etc., complete and as directed by engineering in charge with the following itemsSpecification Height -111 mtr Number of Section -14 Cross section of mast – 20 side polygon Material Construction – S Grade As per BSEN10025 Base Dia & Top Dia (A/F) – Top:300mmBottom;2000 mm Plate thickness –Top:6 mm,middle:8mm,bottom:12mm Standard of galvanization – as Per BSEN iso 1461 Size Of opening and door at base – 2000 X700mm Diameter of base Plate – 3000mm Thickness Of base -50 mm Lighting Protection Final – GI single spike of length800mm PCD of foundation – 2500mm(Mast shall be suitable for Indian Tri colour Flag size (120 X 80 FT) |
| 255 | System for raising lowering of Flag. It shall havedouble drum winch, 12 mm dia galvanized wire rope -448 mtr long]and integral power tools for the raising and lowering of Flag. Suitable control panel shall be provided for reversing operation of power tool motor.Supply of aviation system with 3cx2.50sqmm Cuarmoured cable. (d) Painting of 50 M Flag Mast PUpainting of High Mast shaft with a coating of etch primer,primer and PU paint.Manufacturing and supplying of foundation bolts ( 50 nos)from special steel along with nuts, washers, anchor platesand templates confirming to IS/BIS with all contractor'smaterials, paints, labour, lead, lift, transportation, loading,unloading, all taxes etc., complete and as directed byengineering in charge.Supply of approved Make LED Aviation Obstruction light with all contractor's materials, labour, lead, lift, transportation, loading, unloading, fixing, all taxes etc., Make Bajaj / Hevels Etc.Manufacturing and supplying of 15.0 Meter high hot dipgalvanized octagonal pole suitable to mount 2 no, 500Watt LED Flood lighting mounting arrangement at topwith suitable mounting arrangement at bottom with allcontractor's materials, labour, lead, lift, transportation,loading, unloading, fixing, all taxes etc., complete and asdirected by engineering in charge.Manufacturing and supplying of foundation bolts fromspecial steel along with nuts, washers for 5.00 Metre polewith all contractor's materials, labour, lead, lift,transportation, loading, unloading, fixing, all taxes etc.Manufacturing and supplying of LED Floodlight luminariestype 500 Watt along with suitable arrangements &supports for mounting luminary on flag with allcontractor's materials, labour, lead, lift, transportation,loading, unloading, fixing, all taxes etc., Supply of Indian National Flag (120 X 80 FT)in 100% knitted Polyesters with reinforced super-strongnylon webbing on all 3 sides & rope /toggle sleeve with allcontractor's materials, paints, labour, lead, lift,transportation, loading, unloading, fixing, all taxes etc., |
| 256 | Erection of the Flag Mast with the help of suitableequipment and assemble of operating system and flagsupplied by you.Provision of GI pipe earthing for High mast with 2.5M long40mm dia GI pipe including connection to High mastearth terminal with 25x3mm GI flats with all materials andlabour. (2nos per mast required).Erection of the 1 nos fitting on suitable pole with civil foundation and all labour worksNote:-The contractor shall be responsible for the complete design, detailing, and construction of the civil foundation for the 111-meter high National Flag Mast, including all necessary site surveys, soil investigations, and preparation of structural design calculations and drawings for approval. The scope also includes the supply, installation, testing, and commissioning of all associated MEP works such as electrical wiring, control panels, lighting systems, earthing, and mechanical winch systems. All civil, mechanical, and electrical works shall be executed as per approved designs, relevant standards, and directions of the Engineer-in-Charge, ensuring safety, quality, and timely completion while providing a stable foundation capable of supporting the mast and withstanding design wind loads. |
| 257 | Providing and fixing with approved Screws Plain Gypsum plaster board for roof covering conforming to IS: 2095 (Part -1) : 2011 (Board with BIS certification marks) including carriage of material up to all leads and lifts and as per direction of Engineer in charge. 12.5 mm thick |
| 258 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane including carriage of material up to all leads and lifts and as per direction of Engineer in charge. : 3 mm thick |
| 259 | Providing and Installing Saint-Gobain CertainTeed Roofing includiing roofing Shingles (The shingle should conform to the following standards: 1.Construction–3 piece laminated fiber glass construction. 2.ASTMD3081–Asphalt shingles combined with Glassfelt and surfaced with Mineral granules. 3.ASTME108–Class A fire resistance. 4.ASTMC3161 – For 110Mph wind resistance), Fiber Cement Board Cement Board thickness 16mm , size 1220mm X 2440mm and roof runner; complete for all heights including carriage of material up to all leads and lifts and as per direction of Engineer in charge.. |
| 260 | Providing and applying Saint-Gobain Certain Teed Shadow Ridge–Landmark AR (Colour as per design), complete for all heights including carriage of material up to all leads and lifts and as per direction of Engineer in charge.. |
| 261 | Providing and applying Saint-Gobain Certain Teed Swift Starter – Landmark AR (Colour as per design), complete for all heights including carriage of material up to all leads and lifts and as per direction of Engineer in charge.. |
| 262 | Water Supply/Sanitary Installation :-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge.. |
| 263 | 15 mm nominal outer dia Pipes |
| 264 | 20 mm nominal outer dia Pipes |
| 265 | 25 mm nominal outer dia Pipes |
| 266 | Providing and fixing wall-hung European type vitreous china wash down WC pan of Jaquar make, Cat No. ARS-WHT-39953BIUFSM or equivalent in white colour, complete with UF soft close seat cover, concealed dual flush cistern Cat No. JCS-WHT-2400FS, and flush control plate Cat No. JCP-CHR-852415, including all internal fittings. The WC shall be with integral ‘P’ or ‘S’ trap, fixed with suitable supports and frame (if required), jointed to the soil pipe with cement mortar 1:1 (cement:sand), including all necessary accessories, connection pipes, and carriage of material to site with all leads and lifts. Complete job to be done as per manufacturer’s specifications including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 267 | Providing and fixing Jaquar make model no. LYWHT-38751P180UFSMZ, floor mounted coupled WC with cistern, P-Trap of 180 mm, and size 380x655x765 mm, including UF (Urea Formaldehyde) soft close slim seat cover, hinges, dual flush cistern fitting, and all necessary fixing accessories, as per manufacturer’s specifications including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 268 | Providing and fixing jaquar make Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube & Wall Hook cat no -ALD-573 complete all acessories including carriage of material upto all leads and lifts and as per direction of Engineer incharge. . |
| 269 | Providing and fixing vitreous china urinal of size 340x380x710 mm of approved make such as Jaquar/Hindware/Cera/Somany or equivalent, catalogue no. URS-WHT-13265, along with electronic sensor flushing system, catalogue no. SNR-STL-51083, including all required accessories such as inlet/outlet connections, brackets, wall fixing, flushing arrangements, concealed piping (if any), and fittings. The item includes carriage of materials to site, installation at all heights, levels and leads, testing and commissioning, complete in all respects as per manufacturer’s specificationsincluding carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 270 | Providing and fixing Jaquar make table top wash basin of size 600x440x165 mm, model no. OPS-WHT-15931PM, including Jaquar make waste coupling 32 mm dia with 130 mm long thread, Cat. No. ALD-705L130, complete with all necessary fittings, fixtures, accessories, and making necessary connections with water supply and drainage lines. The item includes carriage of all materials to site with all leads and lifts, fixing in position as per manufacturer’s specifications including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 271 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required including carriage of material up to all leads and lifts and as per direction of Engineer in charge:- |
| 272 | White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 273 | Providing and fixing uplasticised PVC connection pipe with brass unions including carriage of material up to all leads and lifts and as per direction of Engineer in charge: |
| 274 | 15 mm nominal bore 45 cm length |
| 275 | Providing and fixing Jaguar make Blush Deck Mounted Sensor faucet with Control Box & Pre-mixed Water Supply Kit (Battery Operated) cat no.-SNR-51445PK with all acessories complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 276 | Providing and fixing grace glory BG Nirali make anti scracth double-bowl kitchen sink including all accessories, cutting, making good walls wherever required, transportation, labor, and all associated costs complete in all respects including carriage of material up to all leads and lifts and as per direction of Engineer in charge.(510 x 1040mm bowl depth 200 mm.) |
| 277 | Providing and fixing Sink mixer with regular swinging spout (wall- mounted model) with connecting legs and wall flanges Jaguar make cat no QQP-7039PM or Equivalent, including all necessary accessories, fittings, cutting and making good the walls wherever required, complete in all respects including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 278 | Providing and fixing Toilet Paper Holder of Jaquar make (Cat. No. ACN-1153S) or equivalent, including all necessary accessories, screws, wall plugs, drilling, and fixing on finished surface, making good any damage, and ensuring proper alignment and firmness, complete in all respects including carriage of material to site with all leads and lifts, as per manufacturer’s specifications and direction of Engineer-in-Charge. |
| 279 | Providing and fixing jaquar make Single Towel Rail 600mm Long, Stainless Steel Also available CAT NO.- ACN-1111SM including carriage of material upto all leads and lifts and as per direction of Engineer incharge. . |
| 280 | Providing and fixing Towel Ring Round with Round Flange A C N -1121 N Jaquar Make or equivalent including carriage of material upto all leads and lifts and as per direction of Engineer incharge. . |
| 281 | Providing and fixing jaquar make Double Coat Hook Rob hook AK P -35761P Jaquar Make or equivalent including carriage of material upto all leads and lifts and as per direction of Engineer incharge. . |
| 282 | Providing and fixing jaquar make bottel trap with fully casted body (with integral partition ) 32mm with 250 and190 mm long connecting pipes Jaquar Make Cat. No ALD-769L250X190.including carriage of material upto all leads and lifts and as per the direction of Engineer -in-charge |
| 283 | Providing and fixing Angular Stop Cock with Wall Flange of Jaquar make, Cat. No. KUP-35053PM, including necessary cutting, threading, jointing, and fixing in position with all accessories, tools, and materials required for proper installation. The item includes all fittings, PTFE tape, making leakproof joints, testing of installation, and making good any damage caused during the work. including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 284 | Providing and fixing heavy-duty stainless steel grating with cockroach-proof SS strainer of approved design, including supply, transportation, labor, setting in floor with cement mortar to match floor finish as per architect’s instructions, suitable for waste and floor traps, complete in all respects including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 285 | Providing and fixing Jaquar make Alaska Free Standing Bathtub (Cat. No. JBT-WHT-FSBT177542X, size 1712x760x440/580 mm) with built-in overflow & drain, including exposed parts of floor-mounted single lever bath mixer (without hand shower & hose) compatible with ALD-121 (Cat. No. LYR-38121K), complete with all fittings, connections, testing,including carriage of material up to all leads and lifts and as per direction of Engineer in charge |
| 286 | Providing and fixing Soap Dish Holder of Jaquar make (Cat. No. AKP-35731P) or equivalent, including all accessories, hardware, wall fixings, necessary drilling, screws, anchors, and making good the surface after installation, complete in all respects, including carriage of material to site with all leads and lifts, as per manufacturer’s specifications and the direction of Engineer-in-Charge. |
| 287 | Providing and fixing Soap dispenser with metallic bottele AC N -1137 N Jaquar Make or equivalent including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 288 | Providing and fixing jaquar make Corner Glass Shelf (with Bracket) cat no.- ACN-1173 including all acessories carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 289 | Providing and fixing on wall, curved-shaped frosted glass urinal partition made of 8 mm to 10 mm thick toughened glass with chrome finish edge profile, of approved make and model JSE-CHR-810UC450X, size Height: 900 mm, Width: 450 mm, including all necessary chrome-plated brackets, supports, fasteners, and accessories as per manufacturer’s specifications. The item includes preparation of surface, fixing as per approved shop drawings, complete in all respects including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 290 | Providing and fixing jaquar make Wall to Wall Shower Enclosure with one fixed glass and one sliding door. Specially designed sleek profile for mini malistic look. Glass: 8mm Finish: Chrome Sizes: (in mm) - (Right Version) JSE-CHR-STLSDR1015X H: 2000 W: 1500 - 2000mm including all acessories carriage of material upto all leads and lifts and as per direction of Engineer incharge. . |
| 291 | Providing and fixing Grab bar 300 mm AC N -1101 S Jaquar Make or equivalent including carriage of material upto all leads and lifts and as per direction of Engineer incharge. . |
| 292 | Providing and fixing Bathroom Multilayer Vanity For Over The Counter Washbasin (for wash basin), including all required fittings, fixtures, materials, transportation, labor, and finishing as per approved specifications and instructions, complete in all respects including carriage of material up to all leads and lifts and as per direction of Engineer in charge.{suitable size - 600mm x 600 mm x 200mm } |
| 293 | Providing and fixing jaquar make Black 1500x200 mm Shower Panel with Thermostat mixer in black Body cat no-SHP-BLK-JA011 including all accessories carriage of material upto all leads and lifts and as per direction of Engineer incharge. . |
| 294 | Providing and fixing jaquar make Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) cat no-QQP-7281PM including all acessories carriage of material upto all leads and lifts and as per direction of Engineer incharge. . |
| 295 | Providing and fixing Jaquar make Overhead Shower, CAT NO. OHS-1661, 100 mm diameter, round shape, single flow, with face plate made of stainless steel and ABS body in chrome finish, equipped with Rubit Cleaning System, including matching Jaquar make shower arm, complete with all necessary fittings and fixtures, as per manufacturer’s specifications. Complete in all respects including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 296 | Providing and fixing jaquar make Swivel Mirror 615 X 445mm Oval Shape cat no.-ACN-1185 with C.P. brass screws and washers complete. including carriage of material upto all leads and lifts and as per direction of Engineer incharge. |
| 297 | Providing and fixing Nahani trap with all necessary finishing and fixing including carriage of material up to all leads and lifts and as per direction of Engineer in charge |
| 298 | Providing and fixing jaquar make hand dryer Flash touch-free infrared hand dryer with 1150W rated power & carbon brush motor Material: 304 Stainless Steel Finish: Stainless Steel Finish HDRSSF-AK2807 Jaquar Make or equivalent including carriage of material upto all leads and lifts and as per direction of Engineer incharge. . |
| 299 | Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 300 | 15 mm nominal bore |
| 301 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge. Semi rigid pipe |
| 302 | 32 mm dia |
| 303 | Providing and fixing on wall face unplasticised Rigid PVC rain water/waste water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 304 | 75 mm diameter |
| 305 | 110 mm diameter |
| 306 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 307 | Coupler 75 mm |
| 308 | Coupler 110 mm |
| 309 | Single pushfit Coupler 75 mm |
| 310 | Single pushfit Coupler 110 mm |
| 311 | Single tee with door 75x75x75 mm |
| 312 | Single tee with door 110x110x110 mm |
| 313 | Single tee without door 75x75x75 mm |
| 314 | Single tee without door 110x110x110 mm |
| 315 | Bend 87.5° 75 mm |
| 316 | Bend 87.5° 110 mm |
| 317 | Shoe (Plain) 75 mm |
| 318 | Shoe (Plain) 110 mm |
| 319 | Providing and fixing Astral Pvc Door Bend as per Direction of engineer in charge for all location complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 320 | 75mm Dia |
| 321 | 110 mm Dia |
| 322 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 323 | 75 mm |
| 324 | 110 mm |
| 325 | Providing and fixing PVC Gully trap as per Direction of engineer in charge for all location complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 326 | Providing and fixing Astral PVC P trap as per Direction of engineer in charge for all location complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 327 | Providing and fixing Astral PVC Y trap as per Direction of engineer in charge for all location complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 328 | External Water Supply :-Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 329 | Providing and fixing G.I. pipes complete with G.I. fittings Including cutting and threading including trenching and refilling etc including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 330 | 50 mm dia nominal bore |
| 331 | 65 mm dia nominal bore |
| 332 | 80 mm dia nominal bore |
| 333 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge: |
| 334 | 50 to 80 mm nominal bore |
| 335 | Providing and fixing gun metal non- return valve of approved quality (screwed end) including carriage of material up to all leads and lifts and as per direction of Engineer in charge : |
| 336 | Horizontal 50 mm nominal bore |
| 337 | Horizontal 65 mm nominal bore |
| 338 | Horizontal 80 mm nominal bore |
| 339 | Providing and fixing gun metal gate valve/isolation valve with C.I. wheel of approved quality (screwed end) including carriage of material up to all leads and lifts and as per direction of Engineer in charge: |
| 340 | 50 mm nominal bore |
| 341 | 65 mm nominal bore |
| 342 | 80 mm nominal bore |
| 343 | Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) including carriage of material up to all leads and lifts and as per direction of Engineer in charge : |
| 344 | 80 mm dia nominal bore |
| 345 | Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for arious delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump including carriage of material up to all leads and lifts and as per direction of Engineer in charge |
| 346 | Submersible Pump 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 8 stages- 2.0 Hp |
| 347 | Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work including carriage of material up to all leads and lifts and as per direction of Engineer in charge: |
| 348 | 50 mm diameter pipe |
| 349 | 65 mm diameter pipe |
| 350 | 80 mm diameter pipe |
| 351 | Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design including carriage of material up to all leads and lifts and as per direction of Engineer in charge : |
| 352 | With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 353 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design including carriage of material up to all leads and lifts and as per direction of Engineer in charge : |
| 354 | With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 355 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) including carriage of material up to all leads and lifts and as per direction of Engineer in charge : |
| 356 | 50 mm dia |
| 357 | 60 to 80 mm dia |
| 358 | Providing, lowering, laying, aligning, fixing in position at and jointing at all level/ depths ISI marked HDPE pipes of PE-100 grade and PN 6 for sewer application& Drainage as per IS 14333-1996 (amended upto date) in trenches in complete including all material, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Length of pipe shall be measured in between the outer wall of two manholes / Inspection chambers Complete . Pipe in the E371manhole/inspection chamber’s wall shall deemed to be included in the item of manhole/inspection chamber shall not be payable including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 359 | 200mm Nominal dia |
| 360 | 250 mm Nominal dia |
| 361 | Providing, lowering, laying, aligning, fixing in position at and jointing at all level/ depths ISI marked HDPE pipes of PE-100 grade and PN 6 for sewer application& Drainage as per IS 14333-1996 (amended upto date) in trenches in complete including all material, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Length of pipe shall be measured in between the outer wall of two manholes / Inspection chambers Complete . Pipe in the manhole/inspection chamber’s wall shall deemed to be included in the item of manhole/inspection chamber shall not be payable including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 362 | 200mm nominal dia |
| 363 | 250mm nominal dia |
| 364 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 365 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 366 | STP:-Designing, providing, constructing, hydraulic testing, commissioning and giving satisfactory trials of STP for inlet Sewage parameters BOD=300, COD=600, TSS=600, TKN 55, pH= 6.5 to 7.5 based on SBR technology consisting of Inlet Chamber, Screen Chamber, Grit- Detritus Tanks and Biological CASP Basins, Chlorine Contact Tank, Chlorinator with Chlorinator shed & tonner Shed, Chemical Storage & Dosing shed with dosing Equipments, Sludge Sump, Gravity Sludge Thickener, Sludge dewatering system equipment and building, sludge storage shed, necessary piping work with required valves, gates, storm water drains and rain water harvesting system, bypass drains, roads & pathways, landscaping, Compound wall with gates, Administration Block cum Laboratory, Laboratory Equipments, staff quarters, Tools and Plants, Spare Parts, ESR and Tanker Filling points, Metering Room, Guard Room etc. complete as turnkey job with all involved civil, electrical, instrumentation and mechanical works inclusive of following items, units as per detailed specification for civil, electrical, instrumentation and mechanical components with all duties and taxes, etc. complete to achieve BOD < 10 ppm, COD < 100 ppm, TSS < 10 ppm, to get reusable quality of water for industrial / agricultural purposes. outlet parameters shall also include TN < 10 ppm, Nh3N < 2 ppm and TP < 1 ppm) with full automation including PLC-SCADA and Instrumentation, reuse arrangement (storage - GLR, OHSR and pumps) and treated effluent disposal line for treated water 0.5 KM as per specifications. Capacity 150KLD Each proposed 2 Nos.( 2 x 150KLD = 300 KLD) including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 367 | Bore Well:-Boring/drilling bore well of 300mm dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log,including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge, upto 90 metre depth below ground level. |
| 368 | All types of soil-300mm dia bore |
| 369 | Rocky strata including Boulders-300mm dia bore |
| 370 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia , conforming to IS: 4270, of reputed & approved make, including MS centre guide of approved quality ,painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 371 | 150 mm nominal size dia having minimum wall thickness 5.00 mm |
| 372 | 100 mm nominal size dia having minimum wall thickness 5.00 mm |
| 373 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths,including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 374 | 100 mm nominal size dia |
| 375 | 150 mm nominal size dia |
| 376 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 377 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 378 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of 150 mm dia including carriage of material up to all leads and lifts and as per direction of Engineer in charge |
| 379 | Providing and fixing M.S. clamp of 150 mm dia clamp to the top of casing/ housing pipe of tubewell as per IS: 2800 (partI), including necessary bolts & nuts of required size complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 380 | Providing and fixing Bail plug/ Bottom plug of 100mm dia dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I) including carriage of material up to all leads and lifts and as per direction of Engineer in charge. |
| 381 | Providing and fixing Open ball (to stop falling of submersible pump into the bore well) fabricated by joining two circle of 100mm dia across ( dia of bars for which circle shall be fabricated is 8mm), including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 382 | Electrical Works:-Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm HR-FRLS-H-LF (HEAT RESISTANT FLAME RETARDANT LOW SMOKE HALOGEN - LEAD FREE) PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm HRFRLS-LR PVC insulated copper conductor single core cable etc. including carriage of materials up to all lead and lift and as per direction of Engineer in charge. as required. (Polycab/Havells/Finolex for wires and Legrand/Hager/Siemens for switch make or equivalent). |
| 383 | Group A. |
| 384 | Group C. |
| 385 | Wiring for twin control light point with 1.5 sq.mm HR-FRLS-H-LF (HEAT RESISTANT FLAME RETARDANT LOW SMOKE HALOGEN - LEAD FREE) PVC insulated copper conductor single core cable in surface recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm HR-FRLS-H-LF PVC insulated copper conductor single core cable etc. including carriage of materials up to all lead and lift and as per direction of Engineer in charge. as required (Polycab/Havells/Finolex for wires and Legrand/Hager/Siemens for switch make or equivalent ), |
| 386 | Group C. |
| 387 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm HR-FRLS-H-LF (HEAT RESISTANT FLAME RETARDANT LOW SMOKE HALOGEN - LEAD FREE) PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, and earthing the point with 1.5 sq. mm HRFRLS-LR PVC insulated copper conductor single core cable etc. including carriage of materials up to all lead and lift and as per direction of Engineer in charge. as required as required. (Polycab/Havells/Finolex for wires make or equivalent or as approved by Engineer in charge). |
| 388 | Group A |
| 389 | Group C |
| 390 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. as required(Legrand/Hager/Siemens make or equivalent). |
| 391 | S.P. 5/ 6 Amps one way Modular switch. |
| 392 | 5 pin, 5/ 6 Amps Modular socket outlet. |
| 393 | Supplying and fixing two module stepped type fan regulator Legrand make Cat no. 6792 40 Fan Regulator 100W 360 Degree 2M White on the existing modular plate switch box including connections etc. including carriage of materials up to all lead and lift and as per direction of Engineer in charge. as required. (Legrand/Schneider/Siemens make or equivalent). |
| 394 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. including carriage of materials up to all lead and lift and as per direction of Engineer in charge. as required. (Legrand/Hager/Siemens make or equivalent). |
| 395 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. including carriage of materials up to all lead and lift and as per direction of Engineer in charge. as required. (Legrand/Hager/Siemens make or equivalent). |
| 396 | Supplying and fixing PVC batten/ angle holder including 9W Blub and complete connections etc, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. as required., (Anchor/Havells/Philips make or equivalent). |
| 397 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit, including carriage of materials up to all lead and lift and as per direction of Engineer in charge.as required.(Polycab/Havells/Finolex make or equivalent). |
| 398 | 1 run of cable |
| 399 | Supplying and drawing following sizes of HR-FRLS-H-LF PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As Required(Polycab,Havells,Finolex make or equivalent). |
| 400 | 1 x 1.5 sq. mm |
| 401 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of HR-FRLS-H-LF PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit, including carriage of materials up to all lead and lift and as per direction of Engineer in charge.as required (Polycab/Havells/Finolex make or equivalent). |
| 402 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 403 | 2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 404 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 405 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 406 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 407 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of HR-FRLS-H-LF PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. as required (Polycab/Havells/Finolex make or equivalent) , |
| 408 | 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 409 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 410 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 411 | Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. as required. (Precision pipes/Jindal/Di-plast make or equivalent), |
| 412 | 20 mm dia. ISI marked, PVC conduit |
| 413 | 25 mm dia. ISI marked, PVC conduit |
| 414 | 32 mm dia. ISI marked, PVC conduit |
| 415 | 40 mm dia. ISI marked, PVC conduit |
| 416 | Supplying and fixing 6 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc.including carriage of materials up to all lead and lift and as per direction of Engineer in charge. as required (Legrand/Schneider/L&T make or equivalent). |
| 417 | Single pole |
| 418 | Double pole 32Amp |
| 419 | Triple pole and neutral 32Amp |
| 420 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. including carriage of materials up to all lead and lift and as per direction of Engineer in charge. as required (Legrand/Schneider/L&T make or equivalent). |
| 421 | 25 Amps. Cat-A |
| 422 | 40 Amps. Cat-A. |
| 423 | 63 Amps. Cat-A |
| 424 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc,. including carriage of materials up to all lead and lift and as per direction of Engineer in charge. as required (Legrand/Schneider/L&T make or equivalent), |
| 425 | 40 Amps. Cat-A. |
| 426 | 63 Amps. Cat-A. |
| 427 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. including carriage of materials up to all lead and lift and as per direction of Engineer in charge. as required. (But without MCB/RCCB/Isolator) (Legrand/Schneider/L&T make or equivalent). |
| 428 | Double door-4 way |
| 429 | Double door-6 way |
| 430 | Double door-8 way |
| 431 | Double door-12 way |
| 432 | Supplying and fixing following way, Horizontal type/Vertical type (As per site) three pole and neutral, sheet steel, MCB distribution board, 415V,on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.including carriage of materials up to all lead and lift and as per direction of Engineer in charge. as required. (But without MCB/RCCB/Isolator) (Legrand/Schneider/L&T make or equivalent). |
| 433 | Double door-4 way (4+12) |
| 434 | Double door-6 way (4+18) |
| 435 | Double door-8 way (4+24) |
| 436 | Providing, installing, testing and commissioning of ceiling fan and regulator, including wiring, the down road of standard length (upto 30 Cm.) with 1.5 Sq.mm. PVC insulated copper conductor single core cable with BLDC Motor etc, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Atomberg/Kuhl/CromptonGreaves/Usha make or equivalent) |
| 437 | Atomberg make Renesa Ceiling Fan 600MM sweep |
| 438 | Crompton Greaves make Cat No. CFENRIV48OPW5SRG, Ceiling Fan 1200 MM sweep, 5-Star Rated, White Colour |
| 439 | Striker Galaxy Ceiling Fan 1400 MM sweep, White colour Usha Make category-A |
| 440 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan with BLDC Motor, making good the damages, connections, testing and commissioning etc , including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Atomberg/Kuhl/CromptonGreaves/Usha make or equivalent) |
| 441 | Exhaust Fan Fiber Body, Light Duty Sweep 15 cm (150 mm), Atomberg make Efficio Exhaust Fan |
| 442 | Exhaust Fan, Light duty, Sweep 20 cm (200 mm) Crompton Greaves make Cat No. BRISKAIRNEO8WHT, |
| 443 | Exhaust Fan, Metal Heavy duty, 300 mm sweep, Usha make TURBO HEAVY DUTY |
| 444 | Providing and installation of stationary storage type Electric water Geyser by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18\\" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. (Jaquar/Racold/Havells make or equivalent or as approved by Engineer in charge ), including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 445 | VERSA MANUAL HORIZONTAL Cat No. VRM-WHT-HD035 Jaquar make 35 Liter capacity water heater |
| 446 | VERSA MANUAL VERTICAL Cat No. VRM-WHT-VD050 Jaquar make 50 Liter capacity water heater |
| 447 | ERICA VERTICAL Cat No. ERM-WHT-V006 Jaquar make 6 Liter capacity instant water heater 5 Star |
| 448 | Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess , including carriage of materials up to all lead and lift and as per direction of Engineer in charge. as required:-(Legrand/Havells/Panasonic make) |
| 449 | 2 modules (78mmx78mmx50mm) |
| 450 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections , including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Legrand/Hager/Siemens make or equivalent). |
| 451 | Telephone Socket outlet modular type Legrand Make 6792 62 RJ11 |
| 452 | T.V. Socket outlet modular type Legrand Make 6792 60 TV co-axial |
| 453 | RJ 45 Lan Connector Legrand Make |
| 454 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit , including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Polycab/Havells/Finolex make or equivalent). |
| 455 | 2 Pair |
| 456 | 4 Pair |
| 457 | 10 pair |
| 458 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit , including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required(Polycab/Havells/Finolex make or equivalent) |
| 459 | Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase, 230 volts complete , including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required(Bajaj/Havells/Anchor make or equivalent) |
| 460 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 461 | Earthing including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required., including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 462 | G.I. earth plate 600 mm X 600 mm X 6 mm thick |
| 463 | Copper earth plate 600 mm X 600 mm X 3 mm thick |
| 464 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required., including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 465 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run), including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 466 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run), including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 467 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required., including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 468 | Providing and fixing 8 SWG dia Copper wire on surface or in recess for loop earthing along with existing surface/ recessedconduit/ submain wiring/ cable as required., including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 469 | Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required - (Polycab/Havells or Equivalent ) |
| 470 | Armoured cable 6sq. mm (2 core) |
| 471 | Armoured cable 10 sq. mm (4core) |
| 472 | Armoured cable 25sq. mm (3.5 core) |
| 473 | Armoured cable 35sq. mm (3.5 core) |
| 474 | Armoured cable 70sq. mm (3.5 core) |
| 475 | Armoured cable 150 sq. mm (3.5 core) |
| 476 | Armoured cable 240 sq. mm (3.5 core) |
| 477 | Armoured cable 400 sq. mm (3.5 core) |
| 478 | Armoured cable 630 sq. mm (3.5 core) |
| 479 | Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. :- (Polycab/Havells or Equivalent ) |
| 480 | Armoured cable 6 sq. mm (2 core) |
| 481 | Armoured cable 10 sq. mm (4core) |
| 482 | Armoured cable 25 sq. mm (3.5 core) |
| 483 | Armoured cable 35 sq. mm (3.5 core) |
| 484 | Armoured cable 70 sq. mm (3.5 core) |
| 485 | Armoured cable 150 sq. mm (3.5 core) |
| 486 | Armoured cable 240 sq. mm (3.5 core) |
| 487 | Armoured cable 400 sq. mm (3.5 core) |
| 488 | Armoured cable 630 sq. mm (3.5 core) |
| 489 | Ceiling Fixtures:-Providing and fixing following type of Surface fixture Havells make Cat No. PLANOSUR2X2PLS36WLED857S0720, 36W, (2x2fts) complete with all accessories, connections, testing and commissioning etc. , including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Havells/Jaquar/Wipro make or equivalent ) |
| 490 | Providing and fixing following type of Surface fixture Havells make Cat No. MONDO600RDP/S36WLED830SPSWH, 36W, Dia 600 mm, Height 70 mm, Suspened fixture, complete with all accessories, connections, testing and commissioning etc. , including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Havells/Jaquar/Wipro make or equivalent) |
| 491 | Providing and fixing following type of recess fixture Wipro Make Cat No. Aura CRCO13R036HP40GL1, 36W, (1x4fts), complete with all accessories, connections, testing and commissioning etc. , including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Wipro/Havells/Philips make or equivalent) |
| 492 | Providing and fixing following type of Surface fixture Sleek Surface Downlight Philips make SM251C LED20S- 3000 PSU WW 20 watts complete with all accessories, connections, testing and commissioning etc. , including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Philips/Havells/Wipro make or equivalent). |
| 493 | Providing and fixing following type of Recess fixture Philips Make Cat No. DN296B LED20S-6500 PSU, 3000K, 20Watt, Colour-WW colour complete with all accessories, connections, testing and commissioning etc. as required.(Philips/Havells/Wipro make or equivalent ) |
| 494 | Providing and fixing of HARROW PLUS AL Panasonic make Cat no. PBTM17228, 22W, 5700K Tub, LED batten for surface and suspended applications. Aluminium housing, high transmissibility diffuser with high lumen output, complete with all accessories including connections, testing and commissioning , including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Panasonic/Philips/Wipro make or equivalent ) |
| 495 | Providing and fixing of Surface mounted TRUSS ADV Panasonic make Cat No. PBTM05404, 40W, 4000K IP65 Batten with inbuilt heat sink, polycarbonate housing equipped with anti-glare diffuser & energy efficient electronices driver complete with all accessories including connections, testing and commissioning , including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Panasonic/Philips/Wipro make or equivalent ) |
| 496 | Providing and fixing following type of Recess fixture Wipro Make Fokus square-LD34, 4000K, Cat No. LD34-151-XXX-40-XX, Wattage: 12W, complete with all accessories, connections, testing and commissioning etc., including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. (Wipro/Havells/Philips make or equivalent) |
| 497 | Providing and fixing following type of Recess COB Downlight fixture Jaquar Make EMINA, Colour: Warm White, Cat no. LEMA01R015XW, Wattage: 15Watt complete with all accessories, connections, testing and commissioning etc., including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Jaquar/Wipro/Philips make or equivalent ) |
| 498 | Providing and fixing following type Ceiling light Philips make Summit Model No: 581898, Colour: Silver, Material : Aluminium, Dimensions (mm) : 400x100, Lamp Base : LED, Wattage : 1x25W, Lumen/CCT: 2300lm/ 3000K of complete with all accessories, connections, testing and commissioning etc,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required as required.(Philips/Jaquar/Wipro make or equivalent ) |
| 499 | Wall Lights:-Providing and fixing following type Wall Light Philips make Oriel Next Model No. :34143, Colour: Bronze, Material :Metal, Dimensions (mm) : 317x120x35, Lamp Base :LED, Wattage : 15W, Lumen: 800lm/3000K of complete with all accessories, connections, testing and commissioning etc,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required .(Philips/Jaquar/Havells make or equivalent ) |
| 500 | Providing and fixing following type Wall Light Philips make Robin Model No: 15470, Colour: Black, Material : Aluminium-Synthetic, Dimensions (mm) : 174x200x240, Lamp Base : LED Integrated, Wattage : 1x8W, Lumen/CCT: 430lm of complete with all accessories, connections, testing and commissioning etc,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required(Philips/Jaquar/Havells make or equivalent ) |
| 501 | Providing and fixing following type Wall light Jazz Philips Make Model No. 58145, Single Head Wall Light, Colour : Matt Gold and Black, Material : Aluminium & Metal, Dimensions (mm) : 256x118x1900, Lamp Base : E27, Wattage : 20Watt, colour WW of complete with all accessories, conneactions, testing and commissioning etc,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Philips/Jaquar/Havells make or equivalent ) |
| 502 | Providing and fixing following type Wall light Jazz Philips Make Model No. 58145, Wall Light Double, Colour : Matt Gold and Black, Material : Aluminium & Metal, Dimensions (mm) : 256x118x1900, Lamp Base : E27, Wattage : 20Watt, colour WW of complete with all accessories, conneactions, testing and commissioning etc,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Philips/Jaquar/Havells make or equivalent) |
| 503 | Providing and fixing following type Wall light Philips Make Striker, Model No. 581876, Colour : Chrome with fabric white shade, Material: Metal, Dimensions (mm): 250x220x225, Lamp Base: E27, Wattage: 1x20W of complete with all accessories, connections, testing and commissioning etc. as required. (Philips/Jaquar/Havells make or equivalent or as approved by Engineer in charge ) |
| 504 | Providing and fixing following type Duo Led Wall Light Philips Make Model No. 58154, Single Head Wall Light, Colour : White, Material : Aluminium, Dimensions (mm) : 120x120x118, Lamp Base : LED, Wattage : 10Watt, Lumen/CCT : 700lm/3000K of complete with all accessories, conneactions, testing and commissioning etc,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required(Philips/Jaquar/Havells make or equivalent ) |
| 505 | Providing and fixing following type Duo Led Wall Light Philips Make Model No. 58155, Double Head Wall Light, Colour : White, Material : Aluminium, Dimensions (mm) : 270x100x119, Lamp Base : LED, Wattage : 20Watt, Lumen/CCT : 1400lm/3000K of complete with all accessories, connections, testing and commissioning etcincluding carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required(Philips/Jaquar/Havells make or equivalent ) |
| 506 | Providing and fixing following type of Philips make Muziris Picture Light 12W, Model No. 31403, Color: bronze, Material: Aluminium, Warm White in colour, Lumens/CCT: 420lm/3000k complete with all accessories, connections, testing and commissioning etc including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Philips/Jaquar/Havells make or equivalent) |
| 507 | Fixtures:-SITC of following fixtures complete in all respect including connection including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. |
| 508 | Electronic Foot Lamp with LED Philips make white colour (Philips/Jaquar/Havells make or equivalent or as approved by Engineer in charge ) |
| 509 | Led Surface fixture 3W LED Slim Havells make 3000K, Cat No. LHEAATPBIV1W003 (Philips/Jaquar/Havells make or equivalent or as approved by Engineer in charge ) |
| 510 | Limit Switch with minimum of 3Amp current, 220V (for Wardrobe and other appliances Light Control) SiSAH make or equivalent or as approved by Engineer in charge ) |
| 511 | Wall Fan Usha Make Turbo 180, Sweep 45 cm (450 mm), Air Delivery 125 m3/min, Speed 1330 RPM, Power Input 125 W (Usha/Havells/Bajaj make or equivalent or as approved by Engineer in charge ) |
| 512 | Providing and fixing of Mirror Light complete with all accessories including connections, testing and commissioning including carriage of materials up to all lead and lift and as per direction of Engineer in charge As required. (Jaquar/Havells/Wipro make or equivalent). |
| 513 | Philips make Vega 22 Watt LED Mirror Light Model No. 58158 |
| 514 | Philips make Mirror 11 Watt model no. 31165 |
| 515 | Providing and fixing following type of Recess Fixture Wipro make Mollis LD06, Cat No. LD06-151-XXX-57-XX, Warm White, 12Watt complete with all accessories, connections, testing and commissioning etc ,including carriage of materials up to all lead and lift and as per direction of Engineer in charge As required. (Wipro/Philips/Havells make or equivalent ) |
| 516 | Providing and fixing following type of Surface Fixture Wipro make Mollis Surface LD06, Cat No. LD06-151-XXX-57SMG1, Warm White, 12Watt complete with all accessories, connections, testing and commissioning etc,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Wipro/Philips/Havells make or equivalent ) |
| 517 | Providing and fixing following type of Wall Washer Philips Make Gamma Light Double Head, Colour : Anthracite, Material: Aluminium, Dimensions (mm) : 119x80x38, Lamp Base : LED Integrated, Wattage: 4W, Lumen/CCT : 250lm/3000K, Warm White light, in colour complete with all accessories, connections, testing and commissioning etc,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Philips/Havells/Wipro make or equivalent ) |
| 518 | Supplying and fixing of Boundary wall Light Havells LEXO (PRISMATIC) Cat No. LHFOGAE1T11F0, high grade unbreakable polycarbonate material suitable for 20 W LED lamp B22 base. including 0.30 mtr. 40mm G.I.pipe for fixing, containing one no. 2way MCB DB ,6 Amp. MCB, painting complete with all accessories including 5W LED lamp including making connections, testing etc. as required or (Havells/Philips/Wipro make or equivalent) |
| 519 | Supplying and fixing of Gate Light Post Top Vista LP09S, Product Code: LP09S-501-XX-57-XX, 4000K, 45Watt Wipro Make and complete with all accessories including making connections, testing etc, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Wipro/Havells/Philips or equivalent). |
| 520 | Supplying and fixing of Foot Light/Step Light including making connections, testing etc,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Philips/Jaquar/Wipro make or equivalent ) |
| 521 | Philips make Step Light Model No. 30974, Colour: White, Material : Aluminium, 2Watts, Lumen/CCT: 30lm/3000K indoor applications |
| 522 | Philips make Andromeda LED Steplight, Model No. 31435, IP65, Colour: Anthracite Grey, Material : Aluminium, 3Watts, Lumen/CCT: 50-lm/3000K outdoor applications |
| 523 | Providing and fixing following type of Track for Track light Jaquar make Cat No. LTRKSM2MTRXS, 3 line Magnetic Track Slim 2 Meter Surface/ Hanging Mounted, complete with all accessories, connections, testing and commissioning etc,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. (Jaquar/Philips/Wipro make or equivalent ) |
| 524 | Providing and fixing following type of Track Light for Track Jaquar make INSTARAY ROUND SLIM Cat No. LINRSD2R12XW 12 Watt Warm White Colour complete with all accessories, connections, testing and commissioning etc. as required. (Jaquar/Philips/Wipro make or equivalent or as approved by Engineer in charge ) |
| 525 | Providing and fixing following type of Direction light/downlighter 36° Beam Angle Tiltable COB-Downlight Round Jaquar make Cat No. LETS36R012XW 12 Watts Warm White light in colour complete with all accessories, connections, testing and commissioning etc,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Jaquar/Philips/Wipro make or equivalent) |
| 526 | Hanging Lights:-Providing and fixing following type Hanging light Jaquar Make, Model No. JDM-BRN-SLPEA299E27, 1 LT Aluminum with Coffee Painted finishing Pendant, Colour: Coffee, Lamp Base: E27, Wattage: 1x20W of complete with all accessories, connections, testing and commissioning etc,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Philips/Jaquar/Wipro make or equivalent) |
| 527 | Providing and fixing following type Hanging light Jaquar Make Model No. JNL-CHR-MD160020053B, Description: 3 Light clear glass, rose gold mesh with chrome finish pendant , Lamp: G9, LED 4W x 3, of complete with all accessories, connections, testing and commissioning etcincluding carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required(Jaquar/Philips/Wipro make or equivalent ) |
| 528 | Chandeliers:-Supplying, storing, assembling, fixing, testing & commissioning of chandeliers including cost of hangers, chains or any other item required for fixing, including flexible wire from outlet to fitting, Philips make or equivalent or its equavalent as approved by Engineer in charge for indoor application suitable for installing on existing ceiings etc for designer lighting purpose complete in all respect. The work involves assembly, fixing, connecting, commissioning and testing of the fixtures. including carriage of material in all leads, lifts and heights through mechanical or manual trasport CONCEALED LIGHT CHANDELIER Jaquar make Galaxy chandelier, Cat No. CHL-GLD-AS11025, Galaxy chandelier with asfour almaaza crystal (D 914 x H 330 MM including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Jaquar/Wipro/Philips make or equivalent). |
| 529 | Supplying, storing, assembling, fixing, testing & commissioning of chandeliers including cost of hangers, chains or any other item required for fixing, including flexible wire from outlet to fitting, jaquar make or equivalent or its equavalent as approved by Engineer in charge for indoor application suitable for installing on existing ceiings etc for designer lighting purpose complete in all respect. The work involves assembly, fixing, connecting, commissioning and testing of the fixtures. including carriage of material in all leads, lifts and heights through mechanical or manual trasport CONCEALED LIGHT CHANDELIER: Jaquar make Digest chandelier with asfour almaaza crystal (D 820 x H 1300 MM), Cat No: CHL-GLD-AS11015,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Jaquar/Philips/Wipro make or equivalent). |
| 530 | Switchgear:-Supplying, installation, testing and commissioning of Astronomical time switch Havells make Cat No. DHTQB01016 2 output per phase and suitable for single,capable of following output in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight (Auto ON, Auto OFF, Auto) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming and with Magnetic Contactor 4 Pole Power Contactors with AC Coil 2NO + 2NC Cat No. IHPHC032122, at site complete including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. (Legrand/Havells/L&T make or equivalent) |
| 531 | Supply, Installation, testing and commissioning three phase Bus-Bar chamber with specific MCCB and space for incoming/outgoing cables, wall mounting type, front operated all complete with interconnections and painted with powder coated including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Havells, L&T make or equivalent) |
| 532 | 63 AMP three phase Bus Bar Chamber Havells make Cat No. IHBC006308 with Havells make Cat No. IHDA6TBF0063 ,63 Amp FP, MCCB |
| 533 | 100 AMP three phase Bus Bar Chamber Havells make Cat No. IHBC010008 having with Havells make Cat No. IHDA6TBF0100 ,100 Amp FP, MCCB |
| 534 | 200 AMP three phase Bus Bar Chamber Havells make Cat No. IHBC020008 having with Havells make Cat No. IHD2HTBF020 ,200 Amp FP, MCCB |
| 535 | Supply, Installation, testing and commissioning of 100 Amp FP Changeover switch in SS enclosure, Havells Make Cat no. IHCNFE0100 having space for incoming/outgoing cables, wall mounting type, front operated all complete with inter connections and painted with powder coated including carriage of materials up to all lead and lift and as per direction of Engineer in charge As required. (L&T,Havells make or equivalent) |
| 536 | Supply, Installation, testing and commissioning of \\"Do Not Disturb\\" and MMR Control Unit Make -Legrand, Model-Myrius Next Gen Cat no. 6792 56 and 6792 57 in the room including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Legrand,Havells make or equivalent ) |
| 537 | Supply, Installation, testing and commissioning of 16Amp. Single Phase Key FOB Switch Make-Legrand, Model-Myrius Next Gen, Cat no. 6792 53 with three no of keys Cat. no. 6792 55 for switch on and off light in the room including carriage of materials up to all lead and lift and as per direction of Engineer in charge As required(Legrand,Havells make or equivalent) |
| 538 | Supply, Installation, testing and commissioning of 40A Power Contactor with two NO and signaling auxiliaries for contractors conforming to IEC/EN 61095 for single Phase switching of internal lighting in the room Make Legrand, Model-CX3 Cat no. 4125 45 and 4124 31, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Legrand,Havells make or equivalent ) |
| 539 | Fire Alarm System:-SITC of 1 Loop Analogue Addressable Fire Alarm Control Panel Ceasefire make expandable upto 2 Loop, loop current 500mA maximum per loop, dual flash based microprocessor, supports to connect 240 addressable devices one each loop via fully digital communication protocol, equipped with a white backlit display (240x64 pixel resolution) graphical LCD Display with atleast 6 lines of information, 200 fire zones (soft zones), fully programmable via alphanumeric keypad or configuration software, dedicated USB and RS-232 serial port for direct or PC connection, 5500 events storage, loop current 500 mA, panel shall be equipped with in-built multimeter for live monitoring of loop current, earth voltage, loop voltage etc., installer's logo application, can be networked to compatible addressable panels and repeater panels by adding a network card, features battery charger status and temperature, supports programmable cause / effect on outputs, panel housing meets IP30 ingress protection classification,including carriage of materials up to all lead and lift and as per direction of Engineer in charge (MAKE: Ceasefire/Siemens/Honeywell or Equivalent). |
| 540 | SITC of Intelligent Sounder Interface Module Ceasefire make allows to connect conventional Sounder or Sounder Beacon to addressable loop, with in-built short circuit isolator, allows for two stage alarm capability, addressed through auto and manual options, approved by LPCB for EN 54-17 & EN 54-18 standard including carriage of materials up to all lead and lift and as per direction of Engineer in charge (MAKE: Ceasefire/Siemens/Honeywell or Equivalent), . |
| 541 | SITC of Intelligent Analogue Optical Smoke Detector Ceasefire make with advanced optical chamber and smoke inlet design to provide resistance to entry of dust to provide immunity to false alarms, programmable multiple smoke senstivity level setting, bi-directional in-built short circuit isolator to protect against cable faults, dual bi-colour LED's with 360 degree view of status, auto-addressable/electronically addressed, utilises fully digital communication addressable protocol with high noise rejection approved by LPCB for EN 54-7 & EN 54-17 standard, complete with Standard Detector Base for mounting the compatible addressable detectors, ,including carriage of materials up to all lead and lift and as per direction of Engineer in charge (MAKE: Ceasefire/Siemens/Honeywell or Equivalent) |
| 542 | SITC of Intelligent Analogue Multi-Criteria (combination of smoke and heat) Detector Ceasefire make with special algorithms to utilise information from both smoke and heat sensing elements to ensure high level of immunity to false alarms without compromising genuine alarm sensing performance, programmable multiple smoke senstivity level and 9 modes of operation, bi-directional in-built short circuit isolator to protect against cable faults, dual bi-colour LED's with 360 degreeview of status, auto-addressable/ electronically addressed, utilises fully digital communication addressable protocol with high noise rejection approved by LPCB for EN 54-5, EN 54-7, & EN 54-17 standard, Complete with Standard Detector Base for mounting the compatible addressable detectors ,including carriage upto all lead and lift and as per direction of the Engineer in charge (MAKE: Ceasefire/Siemens/Honeywell or Equivalent). |
| 543 | SITC of Intelligent Analogue Manual Call Point Ceasefire make with resettable operating element, with in-built bi-directional short circuit isolator, Bi-Colour LED for local indication of device status, single action operation, reset to normal condition using special reset key, clearly visible alarm flag in the activated state. Approved by LCPB for EN 54-11 standard,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (MAKE: Ceasefire/Siemens/Honeywell or Equivalent). |
| 544 | SITC of Conventional Wall Sounder Ceasefire make with Beacon for providing Audible and Visual Alarms in response to the output signal from the control panel, 32 selectable tone and adjustable sound level, maximum output volume @ 1M distance 100 dB(A), output tone frequency range 440 Hz to 2900 Hz, Visual alarm device output frequency 0.5 Hz, Approved by LPCB for EN 54-3 standard,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (MAKE: Ceasefire/Siemens/Honeywell or Equivalent) |
| 545 | SITC of Single Loop Driver Card Ceasefire make designed for use with compatible analogue addressable panels, provides control and connection/communication to maximum 240 addressable device per loop,including carriage upto all lead and lift and as per direction of the Engineer in charge(MAKE: Ceasefire/Siemens/Honeywell or Equivalent). |
| 546 | SITC of Intelligent Sounder Interface Module Ceasefire make allows to connect conventional Sounder or Sounder Beacon to addressable loop, with in-built short circuit isolator, allows for two stage alarm capability, addressed through auto and manual options. Approved by LPCB for EN 54-17 & EN 54-18 standard ,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (MAKE: Ceasefire/Siemens/Honeywell or Equivalent). |
| 547 | SITC of Translator module Ceasefire make, shall allow addressable loop communication to 32 wireless field devices, system devices can be configured through translator module or software, loop powered, two orthogonal antennas for safe and reliable wireless communication, shall have high wireless tranmission range with wireless field devices of max. 150 meter in open space, maximum radiated power 5dBm (3mW), enabled with 7 operating frequency channels for bi-directional wirelesss communication, operating frequency range 865MHz, IP 65 rated. Approved by LPCB for EN 54-18 and EN 54-25 standard,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (MAKE: Ceasefire/Siemens/Honeywell or Equivalent). |
| 548 | SITC of follwoing items including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 549 | Mounting Accessories like back box for detectors, devices & cable glands, etc. (MAKE: Ceasefire/Siemens/Honeywell or Equivalent), |
| 550 | 24V 3A DC adapter Ceasefire make for expander. (MAKE: Ceasefire/Siemens/Honeywell or Equivalent), |
| 551 | SITC of Response Indicators outside the rooms for getting fire indications of detectors installed above false ceiling / for particular zone / for Loop devices / as a Panel to loop cable completeincluding carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (MAKE: Ceasefire/Siemens/Honeywell or Equivalent). |
| 552 | P.A. System:-Supply Installation, Testing & commissioning of PA system YAMAHA PX3 DUAL CHANNEL 2X500W LIGHTWEIGHT POWER AMPLIFIER with Yamaha MG10 10-Channel Mixing Console: Max. 4 Mic / 10 Line Inputs (4 mono + 3 stereo) / 1 Stereo Bus / 1 AUX (incl. FX) with same 10 zone floor selector console a change over Panel for connection to the Fire Alarm Panel, a Microtek 36MX1KK11 1KVA / 800W UPS with standby battery of 26Ah SMF of 2 x 12 Volts and a monitor panel all pre wired and rack mounted, 1 No. AHUJA Cordless GOOSNECK Microphone AWM630VG complete in all respects & as per specification. PA system shall be coupled to the Fire Alarm System,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (MAKE: Yamaha, Behringer, Bosch). |
| 553 | SITC of Talk back receiver AHUJA CCS-2300, 2-WAY COUNTER COMMUNICATION SYSTEM as per specification complete,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (MAKE: Ahuja or equivalent). |
| 554 | SITC of following including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 555 | Ceiling/ Wall Mount Speaker with operations 6 Watts, (Black LBD 3902 Bosch 6W Wall Mount Speaker) (MAKE: Bosch/Ahuja/JBL/PylePro or equivalent) |
| 556 | In-Wall Dual Channel Stereo Volume Control (MAKE: PylePro/Ahuja/Legrand or equivalent) |
| 557 | Supplying & Fixing of Energy saving display EXIT sign board Glass type specially designed for classic décor with excellent quality high efficiency and long life for single / both side display, well ventilated, powder coated having nominal size LED lamp, battery backup 6 hour to be installed on wall / ceiling etc, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (MAKE: FGE/ LEGRAND/ ABB). |
| 558 | Providing & installing self glow signs luminescent U-1000 Alu. sheet with 2 mm thickness sheet on the wall / ceiling etc for the size of (4''x12'' ) including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required(Make : Nightglow/FGE or equivalent). |
| 559 | Supplying and laying of 1.1 KV Grade 2 X 1.5 sq.mm. copper cables on surface / conduit complete with clamps etc, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (MAKE: Polycab/KALINGA/HYGLOW). |
| 560 | Supplying and laying of 4 x 1.5 sq.mm. PVC insulated PVC sheathed copper conductor armoured control cable of 1.1 KV grade complete including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (From Main Fire Control Panel to the Repeater Panel). (MAKE: Polycab/KALINGA/HYGLOW). |
| 561 | Providing and fixing of following size of black enamelled MS conduit in recess / on surface including all accessories, proper saddling at every 1200 mm intervals and hooks, where imbedded in the wall, MS junction / pull boxes, GI fish wire, complete including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. (Jindal make or equivalent ) |
| 562 | 40 mm dia Conduit |
| 563 | 32 mm dia Conduit |
| 564 | 25 mm dia Conduit |
| 565 | Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 566 | Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Polycab/Havells/Finolex). |
| 567 | Speaker cable Single pair, 2-core, 1.5 sqmm |
| 568 | EPABX System:-SITC of Digital Hybrid IP-PBX System configured for 2 Analog Trunk Connectivity, 2 Digital Extensions, 100 Analog Extensions. It should be possible to reach the capacity of system to 240 analog and 999 IP users without any add-on CPU or chassis/hardware platform.It should support maximum 128 IP-TDM calls and 500 IP-IP calls (without transcoding in Relay RTP Mode) as and when required in the future. System should have two Gigabit Ethernet ports for LAN and WAN to separate out local and VoIP traffic on external network.It should be suitable for DTMF as well as the FSK type of telephone instruments. It should have built-in multi-party conferencing without any software licensing. It should be possible to carry out 15 conferences of 3-participants at a time. The system shall have built in web based software programming tool for system administration. The call ringing sequence would be programmable and have options such as simultaneous, hunting off, round robin and delayed simultaneous.The system shall support flexible numbering for extensions such as it may have extensions with 1 digit, 2 digits and up to 6 digits numbers as well as in combination of all.The system should have built-in outgoing Call Log buffer of 6000 calls, incoming call log buffer of 5000 and call log buffer of 1000 internal calls. Operator features shall have the assistance to extension, attended call transfer, call intercept, indication of call waiting, night service control etc,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required should be available by default. (Matrix/D-link or equivalent) |
| 569 | SITC of Operator-cum maintenence console with large Backlit Display of 240x60 Pixels Graphic LCD, 4 Context Sensitive Keys,Built-in 16 DSS Keys,High Quality Full Duplex Speaker Phone Features Call Forward, Waiting, Transfer, Hold, Conference, Redial, Ringer Lamp. It Must have storage for minimum 20 calls per call log in the console itself including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Matrix/D-link or equivalent ) |
| 570 | SITC of Main Distribution Frame (MDF) with Integrated Protection Module (IPM) complete including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. (Matrix/D-link or equivalent ) |
| 571 | SITC of 3KVA UPS on line, ON LINE UPS 3KVA 1PH:1PH 72V MAX+SKU: 899-601-3001 | CATEGORY: ONLINE UPS Microtek High Frequency, provides Uninterrupted Pure Power for Critical Applications such as Computer Network, Servers, Cyber Cafes, ATM Machine, Labs etc. High Frequency and Double Conversion Online Technology, High End IGBT Based. & Micro Controller Based, Wide Input Voltage Range & Advanced PFC Technology, Advanced Battery Management & Battery Charging in UPS Off Mode, Short Circuit and Overload Protection & SNMP Card Slot (Optional), Smart RS232 Communication with monitoring software, Over Temperature Protection. & EMI / RFI Noise Filter, LCD/LED Display simultaneously & Generator Compatible Specially designed to suit Indian Power and Environment Condition, Isolation Transformer (Optional) & Different Output Voltage settings., Output, Frequency fixed at 50Hz or can be synchronized with Input Frequency., Static Bypass Enable, Disable & Outlets Programmable & Non Programmable, Protection from DC Fan failure & In-built Over Voltage Cut-Off Device, including 1 No. Exide SMF 12v 42Ah Battery for 30 mintues of backup,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Make: Microtek/Emerson/ MITSUBISHI or equivalent). |
| 572 | SITC of Telephone instruments (Panasonic KX -TSC60SXB Black, Landline Phone), with necessary cable etc, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Panasonic/Beetle/D-Link or equivalent). |
| 573 | Surveillnace System (CCTV):-Providing and fixing HIKVISION IP 4MP COLORVU BULLET CCTV (DS-2CD1047G0-L) 4 MP ColorVu Fixed Turret Network Camera, High quality imaging with 4 MP resolution, Excellent low-light performance, Efficient H.265+ compression technology, Water and dust resistant (IP67), 24/7 colorful imaging, 12V, One Year Warranty and as per direction of Engineer-in charge and specifications including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Hikvision/Samsung/Sony or equivalent). |
| 574 | Providing, fixing HIKVISION IP 4.0MP DOME NETWORK CCTV CAMERA (DS-2CD1343G0E-I) 4 MP ColorVu Fixed Turret Network Camera, High quality imaging with 4 MP resolution, Excellent low-light performance, Efficient H.265+ compression technology, Water and dust resistant (IP67), 24/7 colorful imaging, 12V; One Year Warranty and as per direction of Engineer-in charge and specifications including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Hikvision/Samsung/Sony or equivalent). |
| 575 | SITC of HIKVISION IP 4MP 25X 100MTRS PTZ SPEED DOME CAMERA (DS-2DE4425IW-DE) 4-inch 4 MP 25X Powered by DarkFighter IR Network Speed Dome, 1/2.8\\" progressive scan CMOS, High quality imaging with 4 MP resolution, Excellent low-light performance with powered-by-DarkFighter technology, 25X optical zoom and 16× digital zoom provide close up views over expansive areas, WDR, HLC, BLC, 3D DNR, defog, regional exposure, regional focus, Expansive night view with up to 100 m IR distance, Support H.265+/H.265 video compression, one Year Warranty, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Hikvision/Samsung/Sony or equivalent ). |
| 576 | SITC of HIKVISION 32 CHANNEL 4K H. 265+ NVR (DS-7732NI-K4), Third-party network cameras supported upto 8 Megapixels resolution recording, Support 1-ch HDMI, 1-ch VGA, HMDI at up to 4K (3840x2160) resolution, incoming bandwidth: 256Mbps; Outgoing bandwidth: 160Mbps, Support H.265+/H.264/MPEG4 video formats, 4 SATA Port of 8TB each, including minimum length of 3mtrs Honeywell make or equivalent Ultra High Speed HDMI 2.1 Cable with Ethernet, Ultra High Speed HDMI Cable 48GBPS, Supports 3D/4Kx2K/8K Ultra High Definition @60Hz and NVR with one year Warranty complete including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Hikvision/Dahua/Samsung or equivalent) |
| 577 | SITC of Power Supply ISI MARK including 1 year maintenance and as per direction of Engineer-in charge and specifications including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required or its equivalent. |
| 578 | SITC of following POE switch including 1 year maintenance including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 579 | HIKVISION 16 Port Giga PoE Switch Cat No. (DS-3E0518P-E/M) (Hikvision/Samsung/Dlink make or equivalent) |
| 580 | HIKVISION 8 Port PoE Switch (DS-3E0109P-E/M) (Hikvision/Samsung/Dlink make or equivalent) |
| 581 | SITC of DC Connector including 1 year maintenance including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required or its equivalent. |
| 582 | SITC of Samsung 108 cm (43 inches) Crystal 4K Neo Series Ultra HD Smart LED TV UA43AUE65AKXXL (Black) including one year maintenance including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required .(Samsung /Sony make or its equivalent ) |
| 583 | Providing and fixing Polycab cctv 4+1 wiring for fixing of cameras in the surface / recessed medium class PVC conduit as per requirement & one year maintenance and as per direction of Engineer-in charge and specifications as required including carriage of material in all lead and lifts through mechanical and manual transport. |
| 584 | Providing Hard disk 8TB hard disk WD make including 1 year maintenance including carriage of materials up to all lead and lift and as per direction of Engineer in charge As required. (WD/Seagate or equivalent) |
| 585 | Providing and fixing of Crotomak make 6U NVR Network Rack with 4 Power Socket and AC Axial Cooling Fan -Transparent Glass Door, Metal Cabinet Box Wall mount (Size 6: 45 X 55 X 35 cm) including connections, testing and commissioning as required (Plantex/Lepose make or equivalent or as approved by Engineer in charge ) |
| 586 | Fire Fighting System Dry Type:-Providing and fixing of Fire bucket stand Minimax make item code I00000089 for 4 buckets with four nos. fire buckets Minimax make I00016356 MMX 10 Litre complete in all respect.or as per norms of fire deptt andincluding carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Minimax/Ceasefire make or equivalent) |
| 587 | Providing and fixing of Fireman Axe with Insulated Handle Minimax make item code I00003814 (Agni/Suraksha/Omex make) and iincluding carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 588 | Providing fixing, testing and commissioning PORTABLE ABC TYPE FIRE EXTINGUISHERS ”Minimax” Gas Cartridge Type Fire Extinguisher, ISI Marked (IS15683:2018), CE and EN Certified, Cat No. I00016798 MMX ABC 9 Kg IS:15683 Gas Cartridge (MAP 90) (Fire Rating 6A233B) Pure Polyester Powder Coated Body with internal and external coating, Forged brass valve with in bult Pressure Relief Device, Aluminium Siphon tube and diffuser for Dry Powder Models and Stainless Steel with Strainer for Water & Mechanical Foam Models, Stainless Steel safety pin, High durablility Vinyl label (3M make), QR Code label with printed serial number, Individually packed in 7 Ply corrugated paper box together with Wall Bracket, screws & plugs and service manualincluding carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Minimax/Ceasefire make or equivalent) |
| 589 | Providing fixing, testing and commissioning of PORTABLE STORED PRESSURE FIRE EXTINGUISHERS Minimax make I00014861 MMX Foam Based Watermist Low Pressure Fire Extinguisher 9L - IS:15683 (Fire Rating 4A, 75F 233 Stored Pressure Fire Extinguisher, ISI Marked (IS15683:2018), CE and EN Certified, Epoxy Powder Coated Body, Forged brass valve with in bult Pressure Relief Device and Non Return Valve for pressure gauge port, Stainless Steel safety pin, High durablility Vinyl label (3M make), QR Code label with printed serial number, Individually packed in 7 Ply corrugated paper box together with Wall Bracket, screws & plugs and service manual (Minimax/Ceasefire make or equivalent or as approved by Engineer in charge). |
| 590 | Providing fixing, testing and commissioning PORTABLE CO2 TYPE FIRE EXTINGUISHERS ”Minimax” Carbon Di-oxide agent Type Fire Extinguisher, I00006119 MMX CO2 4.5 Kg IS:15683 (Squeeze Grip Valve) (Fire Rating 55B )ISI Marked (IS15683:2018), CE and EN Certified, Containing CO2 gas having purity 99.7% filled in Seamless Cylinder having approval from Petroleum and Explosives Safety Organisation (PESO), coated with High Glossy PU Paint, ISI marked Dual Spindle Valve with Aluminum Wheel & Collar / Squeeze Grip brass valve, Aluminium Siphon tube, High durablility Vinyl label (3M make), QR Code label with printed serial number, Individually packed in 7 Ply corrugated paper box together with Wall Bracket, screws & plugs and service manual,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Minimax/Ceasefire make or equivalent). |
| 591 | Providing, fixing, testing and commissioning MODULAR TYPE CEILING MOUNTED FIRE EXTINGUISHERS Minimax make item code I00007135 MMX SP 5 Kg : Modular (MAP 90) Modular Ceiling Mounted ABC Powder Type Fire Extinguisher, CE Certified, Pure Polyester Powder Coated Body, Forged brass valve with in bult Pressure Relief Device, Non Return Valve for pressure gauge port, Large Dial pressure gauge and Thermo bulb having release temperature of 68°C, High durablility Vinyl label (3M make), QR Code label with printed serial number including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Minimax/Ceasefire make or equivalent). |
| 592 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 593 | 100 mm width X 50 mm depth X 1.6 mm thickness |
| 594 | 150 mm width X 50 mm depth X 1.6 mm thickness |
| 595 | DG Set:-Supply and commissioning of 320 KVA silent type DG set Cat No. CI 320D5P, Cummins engine make Cat No. QSL9-G20 Engine BHP 395, 320 KVA Cummins Diesel Generator, Alternator Stamford brushless alternator, Self-excited, self regulated, Class ‘H’ insulation, Salient pole revolving field, Single bearing, Automatic voltage regulator, Accessories Stamford brushless alternator, Silencer suitably optimized to meet stringent sound emission standards laid down by MOEF / CPCB, Base rail with integral fuel tank (520 litres capacity) is provided with drain plug, air vent, inlet and outlet connection, level indicator, manhole etc. 2 x 12 V dry, uncharged batteries with connecting leads and terminals, Acoustic enclosure, Specially designed to meet stringent MOEF/ CPCB norms of 75 dBA @ 1mtr at 75% load under free field conditions, Designed to have optimum serviceability, Air inlet louvers specially designed to operate at rated load even at 50 deg C air inlet temp, Made on special purpose CNC machines for consistency in quality and workmanship, Powder coated for long lasting service life and superior finish, With UV resistant powder coating, can withstand extreme environments, Use of stainless steel hardware, Insulation material meets exacting IS 8183 specifications for better sound attenuation, Standard scope Engine: Cummins® ‘NTA 855 G2’, direct injection, water cooled engine, 6 cylinder, in-line, 4 stroke, rated at 1500 RPM, conforming to ISO 3046/BS 5514 with specifications like Cummins PT Fuel Pump, Holset turbocharger, Stainless steel exhaust flexible coupling, Silencer, Radiator, Coolant inhibitor, Lube oil cooler, Cartridge paper filters, fuel and lube oil, Dry-type replaceable paper element air cleaner with restriction indicator, Flywheel housing and flywheel to suit single bearing alternator, Electrical starter motor, Battery charging alternator, Electronic control panel with Electronic Governor (ECPG), Engine protections (Shutdown), High water temperature, Low lube oil pressure, Overspeed, First fill lube oil, Control panel Powder coated control panel manufactured with 14/16 gauge CRCA sheet provides: MCCB of suitable rating with overload and short circuit protection Combined meter for KW, kVA and PF, KWh meter, Current transformers, Aluminum busbars of suitable capacity with incoming and outgoing terminations, Indicating lamps for “DG On” and “Load On” Instrument fuses/ MCB duly wired and ferruled, Engine Coolant heater with thermostatic switch, lube oil heater and digital electronic governor, Alternator Thermistors, space heater, Control panel : AMF control panel, battery charger, remote/ auto start panel, auto/ manual synchronizing panel, audio-visual annunciation and indication lamps for engine faults Others: Mobile sets with canopy with cold start kit, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Cummins/Mahindra/Kirloskar make or equivalent). |
| 596 | Supply and fixing of Rubber insulation matt 2mtrx1mtrx12mm to prevent electric shock including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 597 | Supply, installation, testing and commissioning of following MS exhaust pipe medium duty class-B complete with all accessories such as bends flanges,gasket, flexible connections at a suitable distance and supporting arrangement including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required at site. |
| 598 | Main Panel (1250 Amp):-Design as per technical specification and drawings manufacture Main Panel 1250Amp of Consul-RR Ispat make, insure, pack, transport to site, store and erect in proper position , testing and commissioning of cubicle pattern panel fabricated using 14 gauge CRCA MS Sheet steels/16 gauge CRCA for partition and vertical separations, Dust and vermin proof lockable doors, Single Compressions brass glands for Incoming/outgoing cables including required bus-coupler for panels to synchronise with DG sets, All the Distribution panels shall be floor or wall Mounting type, having top/ bottom cable entry , front operated all complete with interconnections by tinned copper Bus Bars Color-coded heat shrinkable PVC sleeves and painted with powder coated process only with Egg shell white colored from inside and light gray from outside as per shade 631 of IS-5 including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Consul-RR Ispat/L&T/Havells make or equivalent)Incoming1 Nos. EP MVS CB 1250A 50kA 4P EDO 240VAC ETA6 drawout electrical circuit breaker having adjustable over load and adjustable short circuit, auxiliary contact, Rotary handel, spreader link, etc.Bus bar1 set of 1600 Amps, 415 volts, 3 phase, 4 wire colour coded copper TPN bus bar, after taking all derating factors.Outgoings3 No. 800 A, FP, 35 kA, MCCB with thermal magnetic release and spreader terminals.3 No. 100 A, FP, 25 kA, MCCB with thermal magnetic release and spreader terminals.5 no. 63 A, FP, 25 kA, MCCB with thermal magnetic release and spreader terminals.6 no. MCB TPN 32 Amp.Instruments1 Nos. 0-250 Volts, 96 sq.mm digital voltmeter with protection fuses and selector switch.1 Nos. 0-150 Amps, 96 sq.mm digital ammeter with 150/5A CT's and selector switch.1 Set R Y B phase indicating lamps with protection fuses.1 Lot of control wiring.1 Set of designation plates. |
| 599 | Panel (800 Amp):-Design as per technical specification and drawings manufacture LT Panel of Consul-RR Ispat make, insure, pack, transport to site, store and erect in proper position , testing and commissioning of cubicle pattern panel fabricated using 14 gauge CRCA MS Sheet steels/16 gauge CRCA for partition and vertical separations, Dust and vermin proof lockable doors, Single Compressions brass glands for Incoming/outgoing cables. All the Distribution panels shall be floor or wall Mounting type, having top/ bottom cable entry , front operated all complete with interconnections by tinned copper Bus Bars Color-coded heat shrinkable PVC sleeves and painted with powder coated process only with Egg shell white colored from inside and light gray from outside as per shade 631 of IS-5 including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required(Consul-RR Ispat/L&T/Havells make or equivalent )Incoming1 Nos. 800 A,FP, 50 kA, MCCB with Microprocessor based release having adjustable over load and adjustable short circuit, auxiliary contact, Rotary handel, spreader link, etc..Bus bar1 set of 1000 Amps, 415 volts, 3 phase, 4 wire colour coded copper TPN bus bar, after taking all derating factors.Outgoings5 No. 200 A, FP, 25 kA, MCCB with thermal magnetic release and spreader terminals.2 No. 100 A, FP, 25 kA, MCCB with thermal magnetic release and spreader terminals.3 Nos. 63 Amps F.P. 16kA, MCCB with thermal magnetic release 3 no. MCB TPN 63 Amp.3 no. MCB DP 63 Amp.,Instruments, 1 Nos. 0-250 Volts, 96 sq.mm digital voltmeter with protection fuses and selector switch.,1 Nos. 0-150 Amps, 96 sq.mm digital ammeter with 150/5A CT's and selector switch. 1 Set R Y B phase indicating lamps with protection fuses, 1 Lot of control wiring, 1 Set of designation plates. |
| 600 | Feeder Pillar (150Amp):-Design as per technical specification and drawings manufacture LT Panel of Consul-RR Ispat make, insure, pack, transport to site, store and erect in proper position , testing and commissioning of cubicle pattern panel fabricated using 14 gauge CRCA MS Sheet steels/16 gauge CRCA for partition and vertical separations, Dust and vermin proof lockable doors, Single Compressions brass glands for Incoming/outgoing cables. All the Distribution panels shall be floor or wall Mounting type, having top/ bottom cable entry , front operated all complete with interconnections by tinned copper Bus Bars Color-coded heat shrinkable PVC sleeves and painted with powder coated process only with Egg shell white colored from inside and light gray from outside as per shade 631 of IS-5 including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required(Consul-RR Ispat make, L&T, Havells or equivalent )Incoming1 Nos. 150 A,FP, 35 kA, MCCB with Microprocessor based release having adjustable over load and adjustable short circuit, auxiliary contact, Rotary handel, spreader link, etc..Bus bar1 set of 200 Amps, 415 volts, 3 phase, 4 wire colour coded copper TPN bus bar, after taking all derating factors.Outgoings5 No. 100 A, FP, 25 kA, MCCB with thermal magnetic release and spreader terminals.3 Nos. 63 Amps F.P. 16kA, MCCB with thermal magnetic release 3 no. MCB TPN 63 Amp.3 no. MCB DP 63 Amp., 1 no. Timer Astronomical Timer TPN with suitable time sechdules in suitable amp rating to PanelInstruments1 Nos. 0-250 Volts, 96 sq.mm digital voltmeter with protection fuses and selector switch.1 Nos. 0-150 Amps, 96 sq.mm digital ammeter with 150/5A CT's and selector switch.1 Set R Y B phase indicating lamps with protection fuses.1 Lot of control wiring.1 Set of designation plates. |
| 601 | Ornamental poles :-Providing and Fixing of L-Shape Twin Mounting 700mm each side ornamental bracket for ornamental pole, Twinkle Make Lux Max product complete in all respect and with one coat of paint including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Twinkle/Bajaj/K-Lite make or equivalent) |
| 602 | Supply, erection and testing of ornamental pole 3000 mm high, cast aluminium, polyester/PU painted Black, LuxMax IMPERIAL-E Pole, Twinkle Make for road side and landscape lighting in position on required M.S. base plate including excavation of pit and refilling the same with cement concrete of 1:3:6 /1:2:4 from the bottom of the. flushing the ground level. The pole should be hot dip Galvanized in single dip to average 65 micron DFT. including supply and fixing of foundation bolts (600mm length), with 1 no. 6 AMP. SP MCB with din bar arrangement and earthing links, 2nos 2cX 6 sqmm AL.Armd cable gland and Himachal Tourism logo engraved at the base of the pole complete in all respect and with one coat of paint including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Twinkle/Bajaj/K-Lite make or equivalent). |
| 603 | Supplying and fixing of Ornamental Light LED POST TOP - SQUARE Medium, LuxMax-PT-164-M 40Watts (or equivalent), 700mm in height and 295mm in Width, warm white colour including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Twinkle/Bajaj/K-Lite make or equivalent). |
| 604 | Fire Fighting System:-Providing, laying, jointing and testing in following sizes of MS Class 'C' (heavy class) pipes Conforming to IS: 1239/3589 with accessories like fittings including tees, elbows, reducers, flanges gaskets, G.I. nus, blots complete with all accessories including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Jindal make or equivalent). |
| 605 | 80 mm dia pipe |
| 606 | 100 mm dia pipe |
| 607 | 150 mm dia pipe |
| 608 | 200 mm dia pipe |
| 609 | 250 mm dia pipe |
| 610 | Providing, fixing, testing and commissioning of MS air cushion tank on pump House fabricated form 6mm thick MS plate, 450 mm in diameter and 2 m in height with dished ends fabricated from 8 mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 611 | Providing, fixing, testing and commissioning of MS air cushion tank on pump House fabricated form 6mm thick MS plate, 250 mm in diameter and 2 m in height with dished ends fabricated from 8 mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessoriesincluding carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 612 | Providing and fixing of Minimax make item code I00016324 MMX Fire Hose Type 1-30M length with Gun Metal Coupling ISI marked non-percolating flexible firefighting two layered delivery hose, synthetic fiber circular woven jacketed, bearing IS:636-2018, 63 mm dia, complete with instantaneous male & female coupling (IS:903) and Copper Wire binding,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Minimax make or equivalent). |
| 613 | Providing and fixing Minimax make item code I00003810 Hose Reel Drum With GM Nozzle & Rubber Hose - 30M Swinging Hose reel Type-A, Wall Mounted with 180° swing, specifications as per IS-884: latest revision made of high quality mild steel, powder coated in red colour. Maximum operating pressure 10 bar, Flow rate 22.5 lpm at 7 bar pressure including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Minimax make or equivalent). |
| 614 | Supply, installation, testing & commissioning of : Gun metal ISI marked odlique pattern hydrant landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with gunmetal cap and G.I. chain, twist release type plug and all accessoSupply, installation, testing & commissioning of : Minimax make item code I00004037 Single Hydrant Valve - Gun Metal ISI marked, Inlet 80mm & Outlet 63 mm Instantaneous, ABS Blank Cap, Hydraulic Test Pressure 21 kg/cm2 for 150 sec, Flow Rate 900 LPM at 7 kg/cm2 (PCD:160 mm, Holes: 4 nos. x 19mm, Flange: 200mm x 12 mm thk)ries as per IS: 5290-1983 (Type 'A') and including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Minimax make or equivalent). |
| 615 | Providing & fixing fibre glass reinforced Fire Hose Cabinet ( 30\\"x24\\"x10\\") out door type, made out of sheet having glazed door with 6mm thick clear Glass including necessary Locking arrangement with allen Key, powder coating with Post Office Red Paint and for Hoseing 2 Nos .RRL Hose Pipe, 1 No Branch pipe including grounding and suitable inscripting the words\\" Hose Cabinet\\" on the Box and Fire Duct Door (900mmx1200mm) for MS pipe, Hose pipe, Hose Reel Drum, Fire Extinguisher complete including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Minimax, Genric make or equivalent). |
| 616 | Minimax make item code I00003812 MS Hose Box - 18SWG CR Sheet Fire Hose Cabinet (30''x24''x10'') (Minimax/Atasi/Genric) |
| 617 | Fire Duct Door (900mm x 1200mm) |
| 618 | Providing and fixing Gunmetal Collecting head with 63 mm dia instantaneous type inlet +150 mm dia flanged outlet with built incheck valve for fire brigade connection to UG Tank +wet riser I.S 904 specification test for 20kg/mm2 Minimax Make item code I00003796, Four Way Collecting Breaching Head - PCD 240mm and including Minimax make item code I00003822 Short Branch Pipe with 20mm nozzle, 63mm Inlet & 20mm Outlet, IS:903 - Gun metal and necessary support complete in all respect and including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Atasi make or equivalent). |
| 619 | Four Way |
| 620 | Providing Cast iron /steel Butterfly Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt ,nuts ,gasket etc. As per table 'E' specification complete in all respect hydraulically test to 20 K./sqcm and including carriage of materials up to all lead and lift and as per direction of Engineer in charge As required (Zoloto make or equivalent). |
| 621 | 80 mm Dia |
| 622 | 100 mm Dia |
| 623 | 150 mm Dia |
| 624 | 200mm Dia |
| 625 | 250mm Dia |
| 626 | Providing and fixing Cast Iron/steel double flanged horizontal type with gunmetal seat non-return valve confirming to class - I of IS : 5312 including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table \\"E\\" and specifications complete in all respect and including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Zoloto make or equivalent) |
| 627 | 80 mm dia |
| 628 | 100 mm Dia |
| 629 | 150 mm Dia |
| 630 | 200mm Dia |
| 631 | 250mm DIa |
| 632 | Supply, Installing, testing and commissioning of 100 mm dial type pressure gauge gate valve with all accessories including carriage of materials up to all lead and lift and as per direction of Engineer in chargeAs required (Zoloto make or equivalen ISI mark). |
| 633 | SITC of Pressure switchs for Main, Jockey, and stand by Diesel pumps including necessary wiring up to control panel and Ballvalve. complete in all respect and including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 634 | SITC of Main pump - duty – 1620 lpm @ 70 mtr. Kirloskar make, end suction pump model db 65/26 in moc: CI-casing, BR-impeller, CS– shaft, mechanical seal, dully coupled with kirloskar make electrical motor 40HP, 2900RPM, 3PH 415V, TEFC 50HZ, mounted on ms base frame, coupling, guard with avm pads & duly coupled with above pump coupled with flexible coupling including as per relevant Indian Standard and specifications and i including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Make KIRLOSKAR/ Crompton or equivalent ). |
| 635 | SITC of Diesel Engine Driven Fire Pumping set suitable for automatic opreation consisting of the following as per specification. Diesel Pump-Duty –1620 lpm @ 70 mtr. Kirloskar make end suction Pump Model DB 100/40 In MOC: CI-casing, BR-impeller, CS – shaft, mechanical seal, dully coupled with kirloskar make diesel engine 4R1040: 12V, 60BHP, 1800 RPM, water cooled mounted on ms base frame, coupling & guard with avm pads, (200 ltr) fuel tank with 1 no of exide make battery with lead including as per relevant Indian Standard and specifications and including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required.(Make KIRLOSKAR/ Crompton or equivalent ). |
| 636 | SITC of electrical main control panel made 16 gauge sheet with power coating consisting of following items.1No. Voltmeter with selector switch 3Nos Ampere meter with selector switch 3Nos. sets of current transformer MCCB 250 Amp-1No MCCB 200 Amp 1No Automatic starter,60 HP motor battery charging set Engine start-stop Relay Engine control ANF relay Engine crank relay Audio Hooter DC control relay Engine control selector switch 63 Amp MCCB-starter 15 HP motor 3 set of the start stop switch 9Nos.indicating lamps Automanul switchset, interlocking kit/terminal charging rate selector switch of trickle/boost and i including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 637 | Providing and fixing PVC water storage tank (SINTEX 3 layer) of ISI: 1270 marked G.I. intel and outlet connections, 25mm nominal bore Elbo, Tee, socket, Tank nipple, float ball valve and mosquito proof PVC cover with locking arrangement (Heavy Duty) including hoisting upto all height above ground level including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (50000 Ltr). (Sintex/Supreme/Vectus make or equivalent). |
| 638 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 639 | Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. |
| 640 | Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete including carriage of materials up to all lead and lift and as per direction of Engineer in charge As required. |
| 641 | Wifi Devices:-Supplying, installing, testing and commissioning of D-Link DIR-3040 AC3000 High-Power Wi-Fi Tri-Band Gigabit Router, Wi-Fi 5 (802.11AC) Technology with speeds of up to 400 Mbps (2.4 GHz) + 866 Mbps (5 GHz) + 1733 Mbps (5 GHz), Six High gain exteanal Antennas for Extended coverage, 4 x 10/100/1000 Mbps Gigabit Ethernet LAN ports, 1 x 10/100/1000 Mbps Gigabit Ethernet WAN port, 1x USB 2.0 & 1x USB 3.0 port to connect USB storage and create network storage including carriage of materials up to all lead and lift and as per direction of Engineer in charge As required Works with the Google Assistant and Alexa – Voice Control with Google Assistant or Alexa. (D-Link) or equivalent ) |
| 642 | Supplying, installing, testing and commissioning of TP-Link RE300 AC1200 Mesh Wi-Fi Range Extender/WiFi Booster/Wireless Repeater (Up to 1200 Mbps), Intelligent Signal Light, Power Schedule, LED Control, Dual Band including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (D-link/TP-link/Cisco make or equivalent). |
| 643 | EV Charging Station:-Supplying, installing, testing and commissioning of Electic Vehicle Charging Station Hindustan Solar make AC001 EV CHARGER 3.3KW x 3, As per Bharat EV Specification With OCPP1.6J With three 16A Socket IEC 60309, With 4.3-inch Touch screen, with LAN Standard 3G/4G, Wi-Fi (Optional), Certifications: CE certified, Authorization: RFID, Input Voltage: 3-phase 400V±10%, Input Frequency: 50Hz / 60Hz, Dimension: 280 x 240 x 120mm Weight: 8Kg, IP Rating: IP54 / IK10 including AC, Charger 10KW ACDB Box, AC Cable 4C 6sqmm Cu, Stand & Canopy (Optional) ,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Hindustan Solar/EVCARS/Kazam or equivalent). |
| 644 | Facade Lighting:-SITC of outdoor Wall UP-Down Light Lupus Wall Light 2x3W Jaquar Make Product Code: LWWL03X203XW Die cast aluminium housing, Opal polycarbonate diffuser, Matt grey finish , Warm white, IP54, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. (Jaquar/Havells/Wipro make or equivalent). |
| 645 | SITC of Alpha Wall Washer Light Color Anthracite finish, Material Premium Aluminium Warm white Philips make Model No 58162, 12Watts IP54 including making connections, testing etc ,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Philips/Jaquar/Wipro make or equivalent). |
| 646 | SITC of Indoor Led Strip LSTP03X008XM 40W, 8W/Mtr Indoor Strip Light (1Pack of 5 Mtr), IP20, Jaquar Make RGB in Colour LED Strip for Cove/facade Lighting including drivers Cat No. LDRV01S048XX for Indoor Power Supply 48W (24V), for suitable for installing in cove, ceiling and inner facade . The work involves assembly, fixing, connecting, commissioning and testing of the fixtures including carriage of materials up to all lead and lift and as per direction of Engineer in charge As required (Jaquar/Havells/Wipro make or equivalent) |
| 647 | SITC of Outdoor Led Strip LSTP04X008XM 40W, 8W/Mtr Outdoor Strip Light (1Pack of 5 Mtr) , IP65, Jaquar Make RGB in Colour LED Strip for Cove/facade Lighting including drivers LDRV02S048XX for Outdoor Power Supply 48W (24V), for suitable for installing in cove, roof and outer facade or as approved by Engineer in charge . The work involves assembly, fixing, connecting, commissioning and testing of the Led strip including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. (Jaquar/Havells/Wipro or equivalent). |
| 648 | SITC of Metal Bulk Head Jaquar make cat No. LBLK02X010XW, 10Watts, WW in Colour, Length: 193 mm Width: 118 mm, Height: 56 mm complete with all accessories including making connections including carriage of materials up to all lead and lift and as per direction of Engineer in charge As required (Havells/Philips/Wipro make or equivalent). |
| 649 | Lift:-Supplying, installing,testing and commissioning of passenger Lift Schindler make, Elevator Function: Person Elevator, Elevator group G1, Number of lifts 1, Capacity / No. of Passengers 884 kg / 13 Passengers, Speed 1.0 m/s, Number of Stops / Entrances: 4 / 4 (LG,G,1,2), Pit depth 1500mm, Headroom 4200 mm, Shaft dimensions W x D 2000 mm x 1800 mm, Machine room: Machine room less, Car dimensions W x D x H 1450 mm x 1450 mm x 2200 mm, Car Door size W x H, 1000 mm x 2100 mm, Car Door Type Door center opening, 2 panels, Shaft Wall Concrete, Building tolerance -25 mm/ +25 mm, Landing door fire protection classification EN 81-58 E120 [ Two hours fire rated ], Counterweight location On the left side, Car access sides 1, Main stop 1, Door drive Fermator Compact, Drive and control Full Collective control - Simplex, Controller position In the right door jamb (LDU), Controller location Landing at floor 5 on side 1 Drive Power 5.7 kW, Main connection TN-S (3L+PE+N), Main power supply 415 V 50 Hz, Light power supply 230, Number of trips per hour 180, Installation method Scaffoldless with hoisting device, Inverter type VAF0xx REGEN, Machine Type Permanent Magnet (PM), Communication Options Selected Intercom TAI 1: 3 ways: CCTV, Remote Monitoring, Alarm by horn in hoistway, Control options Selected Automatic return to main floor, Out-of-service for an elevator, Attendant service (KA/KS), Auto. door closing final time, Position indicator car 1, Travel direction indicator car, Voice signalization, Auto. Rescue Device (ARD), Fire emergency switch Cold Start kit (if applicable) and spring buffer complete in all respect including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Schindler/Mitsbuishi/Kone or equivalent). |
| 650 | Supplying, installing, testing and commissioning of Schindler make Capacity / No. of Passengers 680 kg / 10 Passengers ( Glass Door ), Speed 1.0 m/s, Number of Stops / Entrances 4/ 4 (LG,G,1 and 2), Pit depth 1500 mm, Headroom 4200 mm, Shaft dimensions W x D 1800 mm x 1800 mm, Machine room: Machine room less, Car dimensions W x D x H, 1200 mm x 1400 mm x 2200 mm, Car Door size W x H 900 mm x 2100 mm, Car Door Type Door center opening, 2 panels, Shaft Wall Concrete, Building tolerance -25 mm / +25 mm, Landing door fire protection classification EN 81-58 E120 [ Two hours fire rated ], Counterweight location On the left side, Car access sides 1, Main stop 1, Door drive Fermator Compact, Drive and control Full Collective control - Simplex, Controller position In the right door jamb (LDU), Controller location Landing at floor 3 on side 1, Drive Power 4.6 kW, Main connection TN-S (3L+PE+N), Main power supply 415 V 50 Hz, Light power supply 230 V, Number of trips per hour 180, Inverter type VAF0xx REGEN, Machine Type Permanent Magnet (PM), Communication Options Selected Intercom TAI 1; 3 ways, Provision for CCTV Interface, Remote Monitoring, Alarm by horn in hoistway, Control options, Selected Automatic return to main floor, Out-of-service for an elevator, Attendant service (KA/KS), Car call cancellation, Autodoor closing final time, Building monitoring interface, Position indicator car 1, Travel direction indicator car, Voice signalization, Auto. Rescue Device (ARD), switch complete Fire emergency switch, complete in all respect including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Schindler/Mitsubishi/Kone or equivalent). |
| 651 | Automatic Digital Tyre Inflator:-Supplying, Installation, fixing and commissioning of Automatic Digital TYRE INFLATOR with built in DIGITAL INDICATING PRESSURE CONTROLLER FOR INFLATION OF TYRES, Digital Automatic Tyre Inflator, Model: Setair- 115 KPEI with Dual LED display with Air Tower and IRAPL 3HP Single phase Cast Iron Reciprocating Air Cooled, Air Compressor Mounted on 160 Ltrs Tank Capacity Air Receiver with Electric Motor & Starter with Auto cut-off setting including foundation work and necessary excavtation and one year Warranty with one year calibration certificate including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Maruti or equivalent). |
| 652 | Swimming Pool:-Supplying, Installation, fixing and commissioning of Swimming Pool including Filtration Plant bobbin Wound made with Thermoplastic resin, complete with Six way Multiport Valve , internal distrubution system, Dual grade Filter Media with granulometry 0.4 mm -6 mm Capable to cater a flow rate of 21 m3/hr @50 m3/hr/m2 filtration velocity. Make : Pentair/Certikin (Astral), Recirculation Pump with in-built hair strainer of 1.5 H.P Capacity. Make : Pentair/Certikin (Astral), SS-Ladder made with SS-304 Grade Hollow pipe and Flat Chequered steps (03 Step), Chemical Dosing System for Chlorine and Alum Dosing @ 0-5 LPH dosing with Suction and Injection Pipes and 100 Litres Chemical Tank Make : Pentair / Certikin (Astral), Inlet Nozzles made in white ABS For toddlers and Main Pool. Make : Pentair, Modular Overflow grating made of UV Stablised ABS (double Lock Pattern) and of 250 mm Width, Main Drain grates made of SS-304 Of size 450 mm X 450 mm With frame, Cleaning set Comprising of Anodised Aluminium Vaccum head, telescopic pole, curved brush, straight brush, algae brush, leaf skimmer, butterfly skimmer , test kit , 01 H.P sewage pump, vaccum hose 15 m long and MS trolley with starter, Underwater Lights complete with 18W/12 RGB/Warm White/Cool, White Light, with Flexible conduit hose , Deck Box and Suitable Controller/SMPS with complete wiring . Make : Halbert/Aqua, Providing and Fixing of complete Hydraulic system of pool including laying of scaterred inlet distribution line interconnecting main pool , Balancing tank and Filteration Plant room with required valves and specials . Make Supreme/Finolex (06 Kg Pressure rating), Pool Tiling in Porcelain Tiles of 48 mm X 48 mm size Complete with Adhesives, Grout and Labours. Adhesive and Grouts Make : MYK Latecrete/CAPA IC. Tile Make :Mosaico/ Piccolo including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 653 | Card Entry System:-SITC of following RFID Door lock items complete in all respect including all accessory, connections including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 654 | RFID DOOR LOCK Dolphy make Model No. DHDL0002-G, Colour: Black and Golden, Finish: Matt, Material: Extruded Aluminium, Unlock: RFID Card/Mechanical Key, Battery: 4-AA Alkaline Batteries, Thickness: 38-50mm complete with connections. (Dolphy/Godrej/Dorset or equivalent or as approved by Engineer in charge) |
| 655 | USB ROOM CARD ENCODER Dolphy make Model No. DHDL0007, (Dolphy/Godrej/Dorset or equivalent or as approved by Engineer in charge ) |
| 656 | HANDSET (WIRELESS PORTABLE PROGRAMMER) Dolphy make Model No. DHDL0006, (Dolphy/Godrej/Dorset or equivalent or as approved by Engineer in charge ) |
| 657 | MIFARE CARD FOR UNLOCK DOOR Dolphy make Model No. DHDL-CARD, (Dolphy/Godrej/Dorset or equivalent or as approved by Engineer in charge ) |
| 658 | Solar Panel System:-SITC of 25KW Solar Power Plant Havells make including Solar PV Modules 540Wp (mono type): 47 Nos, Solar Grid Tie Inverter 25KW: 1 Nos., DCDB (DC Safety unit -Supply of DCDB (DC- Safety unit) with Fuses & DC SPD class-1 Nos, AC Distribution Box: Main AC Distribution Box complete with 1 Nos. Class I + II Surge Protective Device with CT & Multifunction Meter & required MCCB/MCB, Cables as per site: From PV Module To LT Panel: 1 C X 4 / 6 Sq mm Solar cable (Module to DCDB), 3.5 C X 6 Sq mm cu wire (ACDB to LT Panel), Required Earthing System: Module Earthing, Inverter & LA earthing, Conduits / Cable Tray: Conduit Pipes, Cable trays, RJ-45 connector as per the site condition, complete in all respect, including all accessory, mounting structure of suitable size including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Havells/Luminous/Tata or equivalent. |
| 659 | Signages:-SITC of following items complete in all respect, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 660 | First aid box (Dimension in cms - L x B x H - 23.6 x 15.3 x 14 make (MILTON/Plantex/Cello Medical Box With Handle) |
| 661 | Danger Notice Plate/Direction/Room installable through bolting, base made up of Stainless Steel with required Marking/Text/Materials painting on it as per specifications. Minimum weight of plate shall be 125gm. (MYSIGN/Signoogle/ Flambird Silver danger sign board nameplate (6inch X12inch )) |
| 662 | Electric Shock & Management Chart Size (50 x 70 cm Language : Hindi-English Combined. The chart Should provide information on how to perform first aid in case of electic shock. Multicolour printing on 80 GSM map litho paper. The chart should be laminated on both sides with 30 micron thick plastic film making it tear & water resistant with suitable frame and galss covering. The chart should be ideal for putting up on a wall or a board.) (make Vidya Chitr Prakashan/teachingnest or equivalent or as approved by Engineer in charge) |
| 663 | All Electrical Test Report for complete Electrical Installation of equipment installed under the project (including DG Commissioning report, Fire Fighting installation report & NOC, Fire Alarm System installation report, Lift installation report & NOC(if applicable) and other equipment test report cards and warranty cards) |
| 664 | Solar Lighting System :-Supplying, installing, testing and commissioning of ALL-IN-ONE SOLAR STREET LIGHT Havells make Cat No. SOLAR AIO 24W with High Efficiency Mono Crystalline Solar PV Module, Lithium Ferro Phosphate battery with in-built BMS technology, High Efficacy LED, MPPT Solar Charge Controller and Aluminium Extruded body & is specially progrmmed to automatically control the dimming and brightness of light, which increases the backup time, complete in all respect including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Havells/Philips/Wipro or equivalent). |
| 665 | Supplying, installing, testing and commissioning of Consul make G.I. 3Mtr Octagonal Pole cat no. RROP-030, top dia 70mm, bottom dia 130mm, sheet thickness not less than 3mm, Base Plate Dimensions (L x B x T) 200 x 200 x 12mm, on road side and landscape lighting in position on required M.S. base plate including excavation of pit and refilling the same with cement concrete of 1:3:6 /1:2:4 from the bottom of the flushing to the ground level including supply and fixing of foundation bolts, complete in all respect including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Consul/Surya/Bajaj or equivalent). |
| 666 | Motor and Pumps:-SITC of Energy Efficient Motor of 2HP Havells make Cat No. CMJ20, Motors are with F Class Insulation, Motor speed 2900 Revolution per minute, Winding type Copper winding, Pump casing Cast iron, Impeller Cast Iron, Shaft Stainless Steel (SS-410), Operating water temperature Ambient temperature, Rated frequency 50 Hz, Voltage operating range 180 V to 240 V, including power cable complete in all respect including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Havells/Crompton Greaves/Kriloskar or equivalent). |
| 667 | SITC of Submersible Pump of 3 HP Kriloskar make Cat No. KP4 JALRAAJ UVA 250-3009, 50mm, 3HP Submersible Pump with Control Panel with control wiring complete in all respect including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (KriloskarHavells/Crompton Greaves or equivalent). |
| 668 | Wiring for Submersible Pump with PVC Insulated size of 4 sq.mm 3 core copper cable Polycab including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required make (Polycab/Havells/Finolex or equivalent). |
| 669 | Supplying, tying the pump with heavy duty steel wire rope (Pump holding wire) of size according to the pump, make of SB Chavan WIRE ROPE, 6MM, 40 MTR, UNGALVANISED STEEL (Length: 40 m, Diameter: 6 mm) or equivalent including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 670 | Foldable Ladder:-Supplying of Corvids Portable and Compact 22 feet A Type Aluminium Telescopic Ladder with 16 Steps, Outdoor Use, EN131 Certified (22 ft (6.6 m) - A Type) Silver complete in all respect including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Corvids/BOWEITI/Equal or equivalent). |
| 671 | Water Heater:-SITC of INTEGRA-X (Split Heat Pump) Jaquar make Cat No. HPS-WHT-500X, 500L Rated Heating Capacity (kW):- 12, Rated Input Power (kW): 2.95, Working Ambient Temperature (Deg C) -7 ~ 43 , Max Outlet Temperature (Deg C) 60/75, Required Power Supply (V/Ph/Hz) 220/1/50, Heating Element (kW): 4.0, Refrigerant Type R410a, Net Dimension - Heat Pump (mm): W H D : 420 800 986. Net Dimension - Water Tank (mm): W H 730 1820, complete in all respect including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Jaquar/Racold/Havells or equivalent). |
| 672 | Golf Cart:-SITC of front facing golf car Yamaha Make(or Equivalent) Drive System, AC Motor, Seating Capacity 6 Persons, Overall Length 4050 mm, Overall Width 1200 mm, Overall Height (With Sun top) 1810 mm 4Ply / 1839 mm High Wheel, Overall Height (Without Sun top) 1195 mm 4Ply / 1214 mm High Wheel Wheel Base 3340 mm, Front Wheel Tread 870 mm, Rear Wheel Tread 980 mm , Minimum Ground Clearance 105 mm 4Ply / 150 mm, High Wheel Frame Robotic welded automotive ladder-style steel frame protected with a multistep full immersion phosphate treatment, electro-deposition epoxy-based coating and an electrostatic applied polyester. Body Thermoplastic olefin, 2-part top coat of automotive-grade polyurethane Front Suspension Fully independent automotive-style strut suspension Rear Suspension Swing arm with coil springs Brakes Self adjusting rear drum Dry Weight (With Batteries) 611 kg (T-875 8 VOLT X 6 PCS) Batteries Trojan T 875 8 VOLT X 6 PCS Single Point Watering System Trojan Battery Watering System for easy maintenance USB Port Standard Voltage Rating 48 Volt Output Rating 4.4 HP (3.3 kw) Make: Mahle Charger Stationery Constant Current Charger | Make: DELTA-Q Maximum forward speed (Adj) 24 km/h Turning Radius 5.7 meter Parking Brake Pedal Brake Tire Size 18.00x8.50-8.00 4 ply / 19.50x6.50-12.00 High Wheels Steering Rack and Pinion Windshield Fold-Down Clear Windshield, Warranty 1 Year as required including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 673 | High Mast:-Supply of \\" RR Ispat(Consul)/Vulcan/Bajaj Make\\" 16 M High Mast lighting system with complete with all accessories. Mast shaft shall be in two sections, hot dip galvanized and suitable for wind velocity as per IS 875 part 3/1987 . It shall also include accessories for high mast including head frame, steel wire rope 6 mm dia (7/19 construction) double drum winch, Galvanized Lantern carriage arrangement 'suitable for 6 Nos.luminaires symmetrically & its control gear boxes and lightning finial. The mast shall have an integral power tool installed inside the base compartment for its operation.The high mast shall be complete with foundation bolts manufactured from special steel and Hot Deep Galvanised along with nuts, washers, anchor plates and templates or equivalent as approvedincluding carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 674 | Supplying, installation, testing and commissiong of 300 Watt Cat No. Philips make BVP410 P LED300 CW NB FG PSU SPD P4278 LED Flood Light IP65 for 16Mtr High Mast including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Philips/Bajaj/Panasonic make or equivalent). |
| 675 | Supply and fixing of control panel housing suitable control circuit for the operation of the mast. It shall also consist 32 A TPN MCB incomer, single dial time switch, 25 A TP contractor for the automatic switching of luminaries , power tool control with 2 no. 9A contractor and raise lowe push button, incoming 35 sg. mm and outgoing 16 & 2.5 sq. mm complete in all respect including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 676 | Constructoin of suitable shallow foundation with 'M 25' grade concrete suitable size foundation bolts /anchor plates for 16 mtrs high mast considering the tested soil bearing capacity at site at 2 mt depth with all materials & labour. Complete foundation design & calculation on basis of the load bearing capacity of the soil including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 677 | Erection of the 16 mtr. high mast with the help of suitable eqipments and wiring of luminaires with all wiring material & labour including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 678 | Supplying, installation, testing and commissiong of Led Aviation light for 16 mtrs High Mast including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (Philips/Bajaj/Panasonic make or equivalent). |
| 679 | Installation of control panel on suitable foundation including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 680 | Provision of GI pipe earthing for High Mast with 2.5M long 40mm dia. G.I. pipe including connection of High Mast earth terminal with 25x3mm GI flats with all materail & labour 2 NOS. PER MAST including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 681 | Organic Waste Converter :-SITC of composting machine of organic waste system of 750KG per day about size Machine Size (L x W x H) in meter 4.45 x 1.25 x 2.22, Power : 43 HP, Waste Treatment Capacity : Up to 750 kg/day, All Wetted Parts : Stainless Steel SS 304, Operation : Fully Automatic., Volume Reduction : Up to 80-90%, Shredder : Built-in with Three phase 415 V, 63 A connections with earthing and neutral, as per technical specifications including civil works of shed and foundation base (Smartenviro/Excel/Tanco or equivalent or as per the direction of site engineer including all leads and lifts.) |
| 682 | Boom Barrier:-SITC of Boom Barrier ZKTeco make with DC Motor, Opening – Closing time 3 to 6 sec., time adjustable feature Maximum Boom Length : 3.5 meters to 6 meters, Special telescopic boom & other accessories: Foundation Plate, Push Button, Front Light Illumination, integrated long range remote, hybrid twoway pair of photocell sensors complete in all respect including all accessory, connections including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (ZKTeco/Godrej/FAAC or equivalent) |
| 683 | Bollard Light (250 Nos.):-Supplying and erecting integrated LED Bollard Cylindrical/Cubical shaped 800mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min.efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete and including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 684 | HVAC WORKS:-Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for 14HP modules and above, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 685 | 14.0 HP HEAT PUMP |
| 686 | 16.0 HP HEAT PUMP |
| 687 | 18.0 HP HEAT PUMP |
| 688 | 20.0 HP HEAT PUMP |
| 689 | 22.0 HP HEAT PUMP |
| 690 | 24.0 HP HEAT PUMP |
| 691 | Supply, installation, testing and commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower ,multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drainpan, other necessary supports etc., suitable for operation on single phase AC supply 230V±10%,50 Hz complete as required. The unit shall have automatic force shut down provision in case of fire on receiveing signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 692 | 1.3 TR Ductable unit |
| 693 | 2.6 TR Ductable unit |
| 694 | 4.0 TR Ductable unit |
| 695 | 5.5 TR Ductable unit |
| 696 | 8.0 TR Ductable unit |
| 697 | 6.3 TR Ductable unit TFA |
| 698 | Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 699 | 3.2 TR Cassette unit with drain pump |
| 700 | Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cordless remote control, drain pan, necessary accessories etc., suitable for operation on 230V±10%,50Hz ,single phase AC supply, complete as required. The unit shall have automatic force shutdown provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27Degree C DB and 19 Degree C WB temperature including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 701 | 2.0 TR Hi-Wall unit with drain pump |
| 702 | Supply, Installation, Testing and commissioning of factory built Ceiling/floor mounted DX double skin type horizontal air handling units made of 25mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation factory injected between them by injection moulding machine, and internal gasket between the skins to interrupt the thermal bridge of the panel. AHU shall be complete in all respect dampers etc.Blower section with AMCA certified DIDW fan for ceiling suspended unit with highly efficient IE3 TEFC Squirrel cage motor drive suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply and variable frequency drive (VFD) as required.Cooling coil section with Dx cooling coil with aluminium finned copper tubes (Thickness not less than 0.4mm) & puf insulated 18G stanless steel drain pan with drain connections and AHU kit (priced separately).Filter section with 50mm thick metal viscus/washable synthetic type air prefilters having efficiency 90% down to 10 micron.Necessary vibration isolation arrangement, canvas connection etc., complete as per specifications and drawing of followings capacities including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 703 | AHU: 28000 CFM (76 TR) 4 Row Deep Coil at 60 mm static pressure. |
| 704 | AHU: 20000 CFM (55 TR) 4 Row Deep Coil at 60 mm static pressure. |
| 705 | AHU: 7000 CFM (15 TR) 4 Row Deep Coil at 60 mm static pressure. |
| 706 | AHU: 8000 CFM (17 TR) 4 Row Deep Coil at 60 mm static pressure. |
| 707 | Supply, installing, testing and commissioning of Electronic expansion valve & control kit compatible to connect the following Dx type AHU with the VRF outdoor unit, the AHU kit should be complete with Control box for flow of refrigerant so as to modulate the capacity of AHU as and when required in sync with VRF outdoor unit, the AHU kit should have corded remote control, and capability to control the AHU fan , speed of AHU Fan including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 708 | Suitable for AHU :20000-24000cfm ahu 15hp) |
| 709 | Suitable for AHU :7000-11000cfm ahu 10hp) |
| 710 | Supply Installation, testing, commissioning of supply & return Y-joints sets of required size for refrigerant piping as per manufacturer standards including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 711 | Y- Joints set |
| 712 | Supply Installation, testing, commissioning and Interconnecting refrigerant copper pipe work (between indoor & outdoor units as per specifications) with (19mm/13mm thick) closed cell elastomeric nitrile rubber tubular insulation. All piping inside the room shall be properly supported with MS slotted angle, including cutting chases, holes in walls/slabs and making them good. All external piping shall run in covered cable tray (item for cable tray shall be quote seperately) including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 713 | Dia 6.4 mm OD 13mm thick insulation |
| 714 | Dia 9.5 mm OD 13mm thick insulation |
| 715 | Dia 12.7 mm OD 13mm thick insulation |
| 716 | Dia 15.9 mm OD 13mm thick insulation |
| 717 | Dia 19.1 mm OD 19mm thick insulation |
| 718 | Dia 22.2 mm OD 19mm thick insulation |
| 719 | Dia 25.2 mm OD 19mm thick insulation |
| 720 | Dia 28.6 mm OD 19mm thick insulation |
| 721 | Dia 31.8 mm OD 19mm thick insulation |
| 722 | Dia 34.9 mm OD 19mm thick insulation |
| 723 | Dia 38.1 mm OD 19mm thick insulation |
| 724 | Dia 41.3 mm OD 19mm thick insulation |
| 725 | Providing and fixing of PVC drain pipe of 6 Kg /cm2 pressure rating complete with 6mm thick closed cell nitrile rubber insulation, fittings, supports, valves as per specifications & drawings including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 726 | 25 mm dia |
| 727 | 32 mm dia |
| 728 | 40 mm dia |
| 729 | Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. |
| 730 | Thickness 0.63 mm sheet (24 G) |
| 731 | Thickness 0.80 mm sheet (22 G) |
| 732 | Thickness 1.00 mm sheet (20 G) |
| 733 | Thickness 1.25 mm sheet (18 G) |
| 734 | Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 735 | Thickness 0.63 mm sheet (24 G) |
| 736 | Thickness 0.80 mm sheet (22 G) |
| 737 | Thickness 1.00 mm sheet (20 G) |
| 738 | Thickness 1.25 mm sheet (18 G) |
| 739 | Supplying, fixing. testing commissioningof GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, in accordance with approved shop drawings and specifications completeincluding carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 740 | Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. |
| 741 | Supplying & fixing of powder coated extruded aluminium Return Air Grills without volume control dampers complete including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 742 | Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 743 | Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 744 | Supply and fixing of Acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as per specifications including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 745 | Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class \\"O\\") insulation on existing duct after applying two coats of cold setting adhesive (CPR X compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 746 | 19 mm |
| 747 | SITC of AMCA certified for sound and air performance (FEG) Tube Axial fan complete with tube casing in MS standard construction powder coated, aluminium impeller with adjustable blade angles,vibration isolator and directly coupled TEFC to Sq.cage induction motor, suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc. The complete fan assembly shall be BSEN-1210-3-2002/UL listed for 250 Deg C 2 hours in accordence with power ventilator for smoke control systems and as per specification complete including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 748 | Air Qty. = 6000 CFM ( Lift+Laundry)Static Pressure = 25mm WgFan Speed = Not exceeding 1450 rpm |
| 749 | Air Qty. = 6500 CFM Static Pressure = 25mm WgFan Speed = Not exceeding 1450 rpm |
| 750 | Air Qty. = 7500 CFM Static Pressure = 25mm WgFan Speed = Not exceeding 1450 rpm |
| 751 | Air Qty. = 16500 CFM Static Pressure = 25mm WgFan Speed = Not exceeding 1450 rpm |
| 752 | Air Qty. = 31000 CFM Static Pressure = 25mm WgFan Speed = Not exceeding 1450 rpm |
| 753 | Air Qty. = 40500 CFM (Parking)Static Pressure = 30mm WgFan Speed = Not exceeding 950 rpm |
| 754 | INLINE FANS:-Supply, Installation, Testing and commissioning of Fresh/exhaust air fan suitable for Inline mounting comprising of forward curved centrifugal blower complete with induction motor, metal clad MCB, canvas connection all compete as required. Motor shall be suitable for single phase, 230 volts, 50Hz AC. supply as per specifications of following capacities: Noiselevel should not exceed 65dB(A)at 3 meter in room condition including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 755 | 100 cfm capacity with10 mm static pressure |
| 756 | 300 cfm capacity with10 mm static pressure |
| 757 | 700 cfm capacity with10 mm static pressure |
| 758 | 1500 cfm capacity with10 mm static pressure |
| 759 | Supply, Installation, Testing and commissioning of wall mounted propeller type exhaust fans of Axial Flow type with light weight type PVC / aluminium impellers with aerofoil contours for high efficiency and low noise. The fan shall be supplied complete with and gravity louvers with a suitable Squirrel cage induction motor including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 760 | 225 mm dia |
| 761 | 300 mm dia |
| 762 | Supplying, Installing, Testing and Commissioning of CELDEK FILL package type air cooling unit with minimum 90% saturation efficiency. Air cooling unit shall be factory assembled and complete with double skin casing 0.8mm Inner / outer pre-coated GI sheets, DIDW forward curved fans with TEFC, sq. cage, induction motors 1440 RPM (IE-3) with IP-55 Protection. Suitable for operation on 415 ± 10% voltage, 50 Hz 3 phase AC supply, drive package including multi sheave pulleys and belts for fans and motors, 1.2mm thick tank & pad section in SS Construction, vibration isolators, wire mesh pre-filters, 200 mm thick CELDEK FILL, Water Circulation Pump (1W+1S), internal PVC piping, valves and fittings, 4-bend PVC eliminator. The Unit shall be following capacities complete including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 763 | 22500 cfm WITH capacity with 40 mm static pressure for kitchen |
| 764 | 5000 cfm WITH capacity with 40 mm static pressure for Hotel kitchen & Laundry |
| 765 | Supply, Installation, Testing and Commissioning of dry type Ceiling/Floor mounted Scrubber comprising electrostatic section multi cell type with 16 G powder coated galvanised steel sheet housing of 16 G (1.4 mm) thick system, bottom drain and metallic mesh filter. The electronic air cleaner shall be the two- stage dual voltage plate type cells and efficiency of 90% as per ASHRAE test Standard for dry particulate. Ionizing- collecting cell of one-piece construction. Power supply shall be 100% solid state. on 200 to 240 VAC, 50HZ, 1Phase input with an LED light indicating the performance status as per specification etc complete including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 766 | 24000 cfm capacity for kitchen |
| 767 | 5500 cfm capacity for kitchen |
| 768 | Supply, installation, testing and commissioning of Suitable SISW Backward Curved Kitchen Exhaust Air Fan in double skin construction complete with TEFC Induction Motor, Drive Assembly, Base Frame, Vibration Isolators and other accessories etc as per specification complete including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 769 | Capacity - 24000 CFM |
| 770 | Capacity - 5500 CFM |
| 771 | Supplying, installing and testing of extruded aluminium Fresh Air intake louvers with bird screen in accordance with approved shop drawings and specifications complete including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 772 | Supply, installation, testing & commissioning of thermal insulated flexible duct of following sizes duly supported at regular interval as per site requirement etc. complete as per specifications including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 773 | 150 mm dia. |
| 774 | SITC Constant Volume Flow Limiters,should be Mechanically System Powered with High-quality plastic control damper and casing stainless steel leaf spring & silicon free oscillation damper ,It should be Factory Calibrated and can be Adjusted at Site with Independent of orientalion in installation.Contorl range should be ± 10 % of Set Flow. complete as per specifications. etc including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 775 | 50 CFM |
| 776 | Design, fabrication, supply, installation, testing and commissioning of panels fabricated out of 2mm thick for structural members and 1.6mm thick for door and covers CRCA sheet in cubicle compartmentalize free standing floor mounted/ wall mounted powder coated with reinforcement wherever necessary. Cable gland plates shall be provided on top and bottom. Panels have 2 Nos. earthing terminals. Panels shall be suitable for 415V, 3-phase, 4-wire, 50Hz supply system lifting hooks shall also be provided in case of large panels. Degree of ingress protection shall be IP42 including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As requiredFan, |
| 777 | Airwasher and Scrubber Starter PanelIncomer (1 No.):100 A, TPN MCCB (10 KA) with adjustable O/L fix short circuit0-500 Volts, digital Voltmeter with S/S and shall be protected by 2 Amps MCBs.0-100 Amps digital Ammeter and 32/5A, 10VA, CL-1 CTs and selector switch.Phase indicating lamps and shall be protected by 2 Amps MCBs.Bus Bars:125 Amps TPN Aluminium busbars, colour coded with heat shrinkable insulation sleeves, Outgoing:2 Nos. TPN MPCB with DOL starter with contactor, O/L relay with single phase preventor suitable for 7.5KW with ON/OFF/Trip indication lamps and push buttons potential free contacts for remote operation in each feeder as required including auxiliary contacts for smoke signal.Toggle Switch 2No |
| 778 | Fan Starter PanelIncomer (1 No.):100 A, TPN MCCB (10 KA) with adjustable O/L fix short circuitMetering:0-500 Volts, digital Voltmeter with S/S and shall be protected by 2 Amps MCBs.0-100 Amps digital Ammeter and 32/5A, 10VA, CL-1 CTs and selector switch.Phase indicating lamps and shall be protected by 2 Amps MCBs.Bus Bars:125 Amps TPN Aluminium busbars, colour coded with heat shrinkable insulation sleeves, Outgoing:1Nos. TPN MPCB with DOL starter with contactor, O/L relay with single phase preventor suitable for 2.2 KW with ON/OFF/Trip indication lamps and push buttons potential free contacts for remote operation in each feeder as required including auxiliary contacts for smoke signal.2Nos. TPN MPCB with DOL starter with contactor, O/L relay with single phase preventor suitable for 11 KW with ON/OFF/Trip indication lamps and push buttons potential free contacts for remote operation in each feeder as required including auxiliary contacts for smoke signal. |
| 779 | Fan Starter Panel Incomer (1 No.):100 A, TPN MCCB (10 KA) with adjustable O/L fix short circuitMetering:0-500 Volts, digital Voltmeter with S/S and shall be protected by 2 Amps MCBs.0-100 Amps digital Ammeter and 32/5A, 10VA, CL-1 CTs and selector switch.Phase indicating lamps and shall be protected by 2 Amps MCBs.Bus Bars:125 Amps TPN Aluminium busbars, colour coded with heat shrinkable insulation sleeves, Outgoing:6Nos. TPN MPCB with DOL starter with contactor, O/L relay with single phase preventor suitable for 9.3 KW with ON/OFF/Trip indication lamps and push buttons potential free contacts for remote operation in each feeder as required including auxiliary contacts for smoke signal. |
| 780 | Fan Starter Panel Incomer (1 No.):100 A, TPN MCCB (10 KA) with adjustable O/L fix short circuitMetering:0-500 Volts, digital Voltmeter with S/S and shall be protected by 2 Amps MCBs.0-100 Amps digital Ammeter and 32/5A, 10VA, CL-1 CTs and selector switch.Phase indicating lamps and shall be protected by 2 Amps MCBs.Bus Bars:125 Amps TPN Aluminium busbars, colour coded with heat shrinkable insulation sleeves, Outgoing:4Nos. TPN MPCB with DOL starter with contactor, O/L relay with single phase preventor suitable for 5.5 KW with ON/OFF/Trip indication lamps and push buttons potential free contacts for remote operation in each feeder as required including auxiliary contacts for smoke signal.ATRIUM6Nos. TPN MPCB with DOL starter with contactor, O/L relay with single phase preventor suitable for 2.2 KW with ON/OFF/Trip indication lamps and push buttons potential free contacts for remote operation in each feeder as required including auxiliary contacts for smoke signal.PRESS |
| 781 | ODU Starter Panel Incomer (1 No.):1250A, TPN ACB (35 KA) with adjustable O/L fix short circuitMetering:0-500 Volts, digital Voltmeter with S/S and shall be protected by 2 Amps MCBs.0-1250 Amps digital Ammeter and 1250/5A, 10VA, CL-1 CTs and selector switch.Phase indicating lamps and shall be protected by 2 Amps MCBs.Bus Bars:1600Amps TPN Aluminium busbars, colour coded with heat shrinkable insulation sleeves, Outgoing:30 Nos.63 A TPN RCBO For ODU4 Nos.40 A TPN RCBO For ODU |
| 782 | Fan and ODU + fan Starter Panel Incomer (1 No.):250 A, TPN MCCB (35 KA) with adjustable O/L fix short circuitMetering:0-500 Volts, digital Voltmeter with S/S and shall be protected by 2 Amps MCBs.0-250 Amps digital Ammeter and 250/5A, 10VA, CL-1 CTs and selector switch.Phase indicating lamps and shall be protected by 2 Amps MCBs.Bus Bars:300 Amps TPN Aluminium busbars, colour coded with heat shrinkable insulation sleeves, Outgoing:2 Nos. TPN MPCB with DOL starter with contactor, O/L relay with single phase preventor suitable for 2.2KW with ON/OFF/Trip indication lamps and push buttons potential free contacts for remote operation in each feeder as required including auxiliary contacts for smoke signal.5 Nos 63A TPN RCBO for ODU |
| 783 | Fan, Airwasher and Scrubber Starter Panel 40A, TPN MCCB (10 KA) with adjustable O/L fix short circuitIncomer (1 No.):Metering:0-500 Volts, digital Voltmeter with S/S and shall be protected by 2 Amps MCBs.Phase indicating lamps and shall be protected by 2 Amps MCBs.0-40 Amps digital Ammeter and 40/5A, 10VA, CL-1 CTs and selector switch.Bus Bars:63 Amps TPN Aluminium busbars, colour coded with heat shrinkable insulation sleeves, Outgoing:2 Nos. TPN MPCB with DOL starter with contactor, O/L relay with single phase preventor suitable for 2.2KW with ON/OFF/Trip indication lamps and push buttons potential free contacts for remote operation in each feeder as required including auxiliary contacts for smoke signal.Toggle Switch 2No |
| 784 | Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed Aluminium conductor armoured cables including , clamped includes anchor fastners wall with suitable clamps, saddles fixing bolts including connecting testing and commissioning etc as per specification complete including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 785 | 4C x 6 Sq.mm. |
| 786 | 4C x 10 Sq.mm. |
| 787 | 4C x 16 Sq.mm. |
| 788 | 4C x 25 Sq.mm. |
| 789 | Supply and erection of hot dip G.I. cable tray perforation not more than 17.5% for specific dimensions along with tees, bends. The cable tray shall be hang from ceiling/ fixed to wall with necessary angle/flat iron / hanging rod, for ceiling suspensions, clamps, anchor fastner, nuts, bolts, washers, not mor than 1.5 mtr. apart complete as per specification to complete the job including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required . The tray shall be as follows :- |
| 790 | 100 x 50 mm x 1.6mm thick |
| 791 | 150 x 50 mm x 1.6mm thick |
| 792 | 225 x 50 mm x 1.6mm thick |
| 793 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 794 | 25 mm dia. ISI marked, steel conduit |
| 795 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 796 | 25 mm dia. ISI marked, PVC conduit |
| 797 | WIRING IN EXISTING CONDUIT / PVC CASING CAPPING WITH COPPER CONDUCTORSupplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 798 | 2x 1.5Sq mm |
| 799 | 4x 2.5sq.mm |
| 800 | EARTHING SYSTEM:-Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing aling with existing surface/recessed conduit/submain wiring/cable including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 801 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 802 | FOUNTAIN NOZZLES:-Supply,Installation,Testing and Commissioning of Center Jet Fountain system comprising high-grade SS304 vertical nozzles mounted on industrial-grade SS304 pipes to produce a prominent vertical water column effect with a streamlined and symmetrical appearance. The system shall be designed to achieve a nozzle height of up to 70 meters, depending on the pump capacity and installation environment. The jet shall be equipped with flow-straightening filters or stabilizing chambers to ensure high-laminar and splash-free performance. The feature shall include precision-machined DN150 SS304 nozzles for long-term corrosion resistance and durability in outdoor installations. Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET. |
| 803 | Supply,Installation,Testing and Commissioning of Sub High Jet Fountain system comprising high-grade SS304 vertical nozzles mounted on industrial-grade SS304 piping to deliver a clean and prominent vertical water jet effect. The system shall be engineered to achieve nozzle heights ranging from 1 meter up to 40 meters, regulated via VFD (Variable Frequency Drive) control for dynamic height modulation and energy efficiency. The jet shall be integrated with flow-straightening filters or stabilizing chambers to ensure a laminar, splash-free, and stable column of water. The feature shall include precision-machined DN100 SS304 nozzles for superior corrosion resistance and long-lasting performance in outdoor environments. Complete including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET. |
| 804 | Supply,Installation,Testing and Commissioning of Musical Spout structure made of SS 304 industrial grade to make different patterns to create Water Effects of adjustable height. Multi Dimension Digital Oscillating Nozzle Height 1-12 Meter with VFD control, DN50 SS304 nozzles with digital motor drive. Match the flow rate to the fountain pump capacity and desired fountain effect.: Features to minimize clogging and blockages. G2.5”, G2” (extemal thread). Having maximum pressure of 0.3 Mpa with Digital pulse type control mode. Completeincluding carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET |
| 805 | Supply,Installation,Testing and Commissioning of Musical Spout structure comprising high-grade industrial SS304 framework designed to produce dynamic water effects with programmable motion and adjustable height patterns. The feature shall include Dual Axis Robotic Swing (DN50), capable of reaching a height of up to 1-12 meters with VFD control, engineered for precise multidirectional movements to create elegant and synchronized water choreography. The system shall be equipped with dual independent motors for pan and tilt functionalities, enabling complex, fluid motion as per the musical sequence. The construction shall ensure durability, corrosion resistance, and long-term performance in outdoor fountain installations. Completeincluding carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: OASE, Fontana Fountains, Himalaya (HMF), Crystal, WET. |
| 806 | Supply,Installation,Testing and Commissioning of Musical spout structure made of SS 304 industrial grade. High-pressure Underwater Solenoid Valve release compressed air and throw a tank of water into height at a sudden. Airshooter Comet nozzle. Match the flow rate to the fountain pump capacity and desired fountain effect.: Features to minimize clogging and blockages. Height 3 meter. Maximum pressure 1 Mpa. Inlet 50*2. Complete including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET |
| 807 | Supply,Installation,Testing and Commissioning of Customized Parabolic Water Jet system comprising high-grade SS304 stainless steel DN100 nozzles, engineered to create a graceful parabolic arc of water reaching up to 30 meters in height. The system shall be equipped with VFD (Variable Frequency Drive) control for adjustable height modulation and energy-efficient operation. A pressure tank with an integrated water-flow director shall be provided to stabilize the water flow from the pumps, ensuring smooth and consistent jet formation. The entire assembly shall be constructed for high durability and corrosion resistance, making it ideal for continuous outdoor installations. The system shall be rated for pressure compatibility with the fountain’s maximum operating conditions and shall include an integrated pressure relief valve to prevent overpressurization and ensure operational safety. Complete including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET. |
| 808 | Supply,Installation,Testing and Commissioning of Musical Spout structure made of SS 304 industrial grade pipes to make different patterns to create Water Effects of adjustable height. solenoid valved controlled Curve Sequential Jet for upper waterbody Match the flow rate to the fountain pump capacity and desired fountain effect.: Features to minimize clogging and blockages. Nozzle Height 10 Meter DN40 SS304 nozzles. Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET |
| 809 | Supply,Installation,Testing and Commissioning of Musical Spout structure made of SS 304 industrial grade pipes to make different patterns to create Water Effects of adjustable height. solenoid valved controlled Circular Sequential Jet for lower waterbody Match the flow rate to the fountain pump capacity and desired fountain effect.: Features to minimize clogging and blockages. Nozzle Height 10 Meter DN40 SS304 nozzles. Complete with all respectsincluding carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET |
| 810 | Supply,Installation,Testing and Commissioning of Digital Finger Jet system designed to produce expressive, dynamic water effects through a digitally controlled swing mechanism. The feature shall include vertical spray nozzles fabricated from high-grade SUS304 stainless steel, capable of reaching a height of 1 to 12 meters, precisely modulated using VFD (Variable Frequency Drive) control. The system shall be equipped with a digitally controlled motorized swing unit, enabling smooth, programmable movement to create a dancing finger-like pattern in synchronization with musical sequences. Engineered for durability, precision, and outdoor performance, the Digital Finger system offers an innovative and interactive visual element for modern musical fountains. Complete including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET. |
| 811 | Supply,Installation,Testing and Commissioning of Musical Spout structure made of SS 304 grade industrial grade to make different patterns to create Water Effects of adjustable height. Variable height Trumpet nozzle DN50 SS304 nozzles. Match the flow rate to the fountain pump capacity and desired fountain effect.: Features to minimize clogging and blockages. Trumpet-shaped design with a flared opening to create a visually striking water effect resembling a trumpet or flower. Height 1-2 meter. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Symphony, Crystal, WET. |
| 812 | Supply,Installation,Testing and Commissioning of Musical Spout structure made of SS 304 industrial grade pipes to make different patterns to create Water Effects of adjustable height. solenoid valved controlled atomizing spray jet for upper wtaerbody Match the flow rate to the fountain pump capacity and desired fountain effect.: Features to minimize clogging and blockages. DN25 Height 2 Meters SS304 nozzles. Controlled by motorised valve. Match the flow rate to the fountain pump capacity and desired fountain effect.: Features to minimize clogging and blockages. Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET. |
| 813 | Supply,Installation,Testing and Commissioning of customized stainless steel 304 material fire nozzle with polished finish mechanism using water-resolvable fuel to produce fireballs 1 - 6 meters with Solenoid valves. The design ensures a stable and robust framework to withstand the heat and pressure while maintaining the desired fireball effect. The system includes an integrated control system for seamless operation and efficient fuel distribution to achieve consistent fireball projections. Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET. |
| 814 | Supply,Installation,Testing and Commissioning of Musical Spout structure made of SS 304 industrial-grade material to create different patterns and water effects with adjustable height. The system includes Digital Vario Jet to produce three different patterns. It is equipped with DN50 SS304 nozzles for precise water flow. Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Symphony, Crystal, WET. |
| 815 | Supply,Installation,Testing and Commissioning of Musical Spout structure made of SS 304 industrial grade to make water screen adjustable height. Height 15 width 45 meter with VFD control Comet Nozzle SG150 SS304 nozzles. The water image projection screen with Digital Motor Drive should be supported by a stable and robust framework that can withstand the water pressure and maintain the desired shape and size. An integrated control system to synchronize the water flow and projection content for seamless operation. Efficient water distribution system that delivers a continuous flow of water across the screen surface. Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET |
| 816 | Supply,Installation,Testing and Commissioning of Rotary Nozzle system featuring a precision-machined DN50 stainless steel nozzle mounted on a robust, corrosion-resistant SS304 structure. The system shall be designed to deliver dynamic rotating water effects through controlled angular motion, creating visually engaging spiral or fan-shaped patterns. The rotary mechanism shall be engineered for smooth, continuous operation with minimal maintenance, and capable of withstanding long-term outdoor exposure. Suitable for musical and interactive fountain installations, the nozzle shall ensure uniform water distribution and efficient performance across varying flow rates and pressures. Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET. |
| 817 | Supply,Installation,Testing and Commissioning of Fountain Integration Asset designed to support Central Jet or Water Screen Generator operations. The setup includes a custom-built mechanism that integrates the nozzle, valve, branch piping, water flow tank, and pump into a single cohesive unit. It comes with a customized pump bracket, secure pump connectors, and connection pipes to ensure proper alignment and performance. The entire assembly is fabricated using durable SS304 material and tailored to site requirements. Supplied in an XXL module with a minimum diameter of 0.8 meters, including an integrated tank, this system is built for reliable, long-term outdoor use. Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET |
| 818 | Supply,Installation,Testing and Commissioning of Fountain Integration Asset suitable for Sub-high Jets and parabolic Arch Jet, consisting of a custom-engineered mechanism that brings together the nozzle, valve, branch piping, water flow tank, and pump in one integrated setup. The system includes a customized pump bracket, pump connectors, and connection pipes to ensure proper hydraulic alignment and efficient performance. Built using SS304-grade material for strength and weather resistance, the asset is delivered in an XL module with a minimum diameter of 0.5 meters, including a built-in tank. Designed for flexibility and durability in outdoor fountain installations. Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET. |
| 819 | Supply,Installation,Testing and Commissioning of Fountain Integration Asset designed for Digital oscillating , 3D dual axis robotic nozzle, VFD Trumpet, Digital Vario, and Rotating Nozzles. This compact, custom-built unit integrates the nozzle, valve, branch piping, and pump, ensuring smooth and synchronized performance. The setup includes a customized pump bracket, pump connectors, and SS304-grade connection pipes for durability and ease of installation. Delivered in an L module, the unit includes a tank with a diameter ranging from 0.3 to 0.45 meters, tailored to specific design requirements. Ideal for precise, dynamic water effects in modern fountain systems. Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET. |
| 820 | Fountain Pipes:-Supply,Installation,Testing and Commissioning of Threaded Pipe SS 304 seamless Pipe with 3mm Thickness, bended, cut, welded as fountain drawings. With Sloped threading Pipe Diameter:DN100/DN65, Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET |
| 821 | Supply,Installation,Testing and Commissioning of Threaded Branch Pipe SS 304 seamless Pipe with 3mm Thickness, bended, cut, welded as fountain drawings. With Sloped threading Pipe Diameter:DN150, Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET |
| 822 | Supply,Installation,Testing and Commissioning of Threaded Branch Pipe SS 304 seamless Pipe with 3mm Thickness, bended, cut, welded as fountain drawings. With Sloped threading Pipe Diameter:DN40, Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET |
| 823 | Supply,Installation,Testing and Commissioning of Threaded Branch Pipe SS 304 seamless Pipe with 3mm Thickness, bended, cut, welded as fountain drawings. With Sloped threading. Pipe Diameter:DN25, Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET |
| 824 | Supply,Installation,Testing and Commissioning of 1 CBM Pressure Reservoir Tank fabricated from high-grade steel, designed to store compressed air and function as a pressure buffering device for air shooters in fountain systems. The tank shall be rated for a maximum pressure of 1.2 MPa and include all necessary fittings, pressure gauges, inlet/outlet valves, safety valves, and drain valves. The unit must be factory-tested for pressure integrity and suitable for outdoor fountain automation use. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 825 | Supply,Installation,Testing and Commissioning of DN40 Stainless Steel Connection Pipe with a minimum thickness of 3mm, suitable for high-pressure fountain applications. The pipe shall be fabricated from SS304 grade material for corrosion resistance and durability. All pipes must be cut, welded, and finished as per site requirements with proper leak-proof joints, supports, and connectors. The installation shall ensure smooth flow and structural integrity for long-term outdoor use.Complete with all respectsincluding carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 826 | Supply,Installation,Testing and Commissioning of DN15 Stainless Steel Connection Pipe with a minimum thickness of 3mm, suitable for precise and durable connections in fountain systems. The pipe shall be made from SS304 grade stainless steel, ensuring corrosion resistance and structural strength. Pipes must be accurately cut, welded, and installed with necessary fittings and supports to maintain leak-proof and long-lasting performance in outdoor conditions. Complete with all respectsincluding carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 827 | Control Valves:-Supply,Installation,Testing and Commissioning of Electrically operated Pressure Valve designed for extremely fast operation and minimum obstruction for a high flow rate. Pressure Valve for uniformed or designed spray Height. Material: SS304Diameter: DN50, Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET |
| 828 | Supply,Installation,Testing and Commissioning of Electrically operated Pressure Valve designed for extremely fast operation and minimum obstruction for a high flow rate. Pressure Valve For uniformed or designed spray Height. Material: SS304Diameter: DN40, Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As requiredMake: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET |
| 829 | Supply,Installation,Testing and Commissioning of Electrically operated Solenoid Valve designed for extremely fast operation and minimum obstruction for a high flow rate. Solenoid Valve for uniformed or designed spray Height. Material: SS304Diameter: DN40, Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET |
| 830 | Fountain Pumps & Motors:-Supply,Installation,Testing and Commissioning of Stainless Steel Submergible high-speed single-stage horizontal pump, SP125-7, operating at a rated power of 63KW, designed for efficient and quiet performance in fountain applications. The pump shall be made entirely of stainless steel, including impeller and housing, with high resistance to corrosion and chemicals. Operating speed: n ≈ 2850 r/min. System to adopt three-phase, four-wire connection with stainless steel mesh cover. Input Voltage: 380–415V, 50Hz. Customized to meet fountain system requirements.Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET. |
| 831 | Supply,Installation,Testing and Commissioning of Stainless Steel Submergible high-speed single-stage horizontal pump, model SP160-4, with a rated power of 55KW, designed for low-noise, high-efficiency fountain operations. The entire pump body, including the impeller, shall be made from corrosion-resistant stainless steel. Operating speed: n ≈ 2850 r/min. System shall include stainless steel mesh cover and support three-phase, four-wire cable configuration. Input Voltage: 380–415V, 50Hz. Customized to suit fountain system integration. Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET. |
| 832 | Supply,Installation,Testing and Commissioning of Stainless Steel Submergible high-speed single-stage horizontal pump, SP30-3, with a rated power of 3KW, engineered for efficient and quiet operation in fountain systems. The pump body and impeller shall be constructed from high-grade stainless steel, offering excellent corrosion and chemical resistance. Operating speed: n ≈ 2850 r/min. Equipped with stainless steel mesh cover and compatible with a three-phase, four-wire power supply. Input Voltage: 380–415V, 50Hz. Customized for integration in musical and decorative fountain setups. Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET. |
| 833 | Supply,Installation,Testing and Commissioning of Stainless Steel Submergible high-speed single-stage horizontal pump, SP30-3, with a rated power of 3KW, engineered for efficient and quiet operation in fountain systems. The pump body and impeller shall be constructed from high-grade stainless steel, offering excellent corrosion and chemical resistance. Operating speed: n ≈ 2850 r/min. Equipped with stainless steel mesh cover and compatible with a three-phase, four-wire power supply. Input Voltage: 380–415V, 50Hz. Customized for integration in musical and decorative fountain setups.Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET. |
| 834 | Supply,Installation,Testing and Commissioning of silent rotary screw Air compressor with integrated refrigerant Dryer. Having Electric Cubical, Air Filter, Air Receiver (Oil Separator Vessel), Air Outlet Valve, Air Cooler, Oil Cooler, Check Valve/Oil stop valve, Automatic Condesate outlets, Manual Condensate outlets, Dryer, Compressor Elements, Elektronikon® Graphic Controller, Cooling Fan, Drive Motor, Oil Filter, Emergency Stop Button, unloader, water separator valve with required air receiver tank/Storage Tank as per the capacity along with Pnumetic pipe, elbow, tee, flanges, adaptor, valves and all other required accessories.Rated Power:18.5KW With 380-440V50HZ AC Rated Maximum Pressure: 1.0M PA Rated Volume: 2.7 CBM/Min, Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 835 | Supply,Installation,Testing and Commissioning of Stainless Steel Submergible high-speed single-stage horizontal pump, model SP160-4, with a rated power of 55KW, designed for low-noise, high-efficiency fountain operations. The entire pump body, including the impeller, shall be made from corrosion-resistant stainless steel. Operating speed: n ≈ 2850 r/min. System shall include stainless steel mesh cover and support three-phase, four-wire cable configuration. Input Voltage: 380–415V, 50Hz. Customized to suit fountain system integration. Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET. |
| 836 | Supply,Installation,Testing and Commissioning of Stainless Steel Submergible high-speed single-stage horizontal pump, SP160-1, with a rated power of 13KW, engineered for efficient and quiet operation in fountain systems. The pump body and impeller shall be constructed from high-grade stainless steel, offering excellent corrosion and chemical resistance. Operating speed: n ≈ 2850 r/min. Equipped with stainless steel mesh cover and compatible with a three-phase, four-wire power supply. Input Voltage: 380–415V, 50Hz. Customized for integration in musical and decorative fountain setups. Complete with all respectsincluding carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET. |
| 837 | Supply,Installation,Testing and Commissioning of Professional Stainless Steel Submergible high-speed multi-stage pump, SP95-2, with a rated power of9.2 KW designed for large-capacity fountain systems with a discharge volume of 160 CBM/hour and a lift of 140 meters. The pump shall be constructed from SUS304 stainless steel for high durability, corrosion resistance, and continuous operation. Rated Power: 93KW, Input Voltage: 380–415V, 50Hz. Suitable for heavy-duty performance with stable pressure and flow in musical and architectural fountains. Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET. |
| 838 | Supply,Installation,Testing and Commissioning of Stainless Steel Submergible high-speed single-stage horizontal pump, SP17-1, with a rated power of 0.55KW, engineered for efficient and quiet operation in fountain systems. The pump body and impeller shall be constructed from high-grade stainless steel, offering excellent corrosion and chemical resistance. Operating speed: n ≈ 2850 r/min. Equipped with stainless steel mesh cover and compatible with a three-phase, four-wire power supply. Input Voltage: 380–415V, 50Hz. Customized for integration in musical and decorative fountain setups. Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET. |
| 839 | Supply,Installation,Testing and Commissioning of Stainless Steel Submergible high-speed single-stage horizontal pump, SP30-8, with a rated power of 7.5KW, engineered for efficient and quiet operation in fountain systems. The pump body and impeller shall be constructed from high-grade stainless steel, offering excellent corrosion and chemical resistance. Operating speed: n ≈ 2850 r/min. Equipped with stainless steel mesh cover and compatible with a three-phase, four-wire power supply. Input Voltage: 380–415V, 50Hz. Customized for integration in musical and decorative fountain setups. Complete with all respectsincluding carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET. |
| 840 | Supply,Installation,Testing and Commissioning of Stainless Steel Submergible high-speed single-stage horizontal pump, SP160-8, with a rated power of 93 KW, engineered for efficient and quiet operation in fountain systems. The pump body and impeller shall be constructed from high-grade stainless steel, offering excellent corrosion and chemical resistance. Operating speed: n ≈ 2850 r/min. Equipped with stainless steel mesh cover and compatible with a three-phase, four-wire power supply. Input Voltage: 380–415V, 50Hz. Customized for integration in musical and decorative fountain setups. Complete with all respect including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET. |
| 841 | Supply,Installation,Testing and Commissioning of SP30-2 with 2.2KW Stainless Steel Underwater Motor: IP68 waterproof-rated motor constructed with high-grade stainless steel (SS304/SS316) for corrosion resistance and durability in submerged conditions. The unit shall be integrated with a speed reducer for controlled rotational output, suitable for use in dynamic fountain features or kinetic water elements. The motor shall be designed for continuous duty operation, vibration-free performance, and easy maintenance. Complete installation as per approved layout and technical requirements.Complete with all respectsincluding carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 842 | Supply,Installation,Testing and Commissioning of Fire Machine featuring a professional high-pressure fuel pump system designed for industrial and commercial applications. The system is integrated with a motor, high-pressure fuel pump, nitrogen-protected pressure reservoir, and an 80L fuel tank to ensure reliable and safe operation under high-pressure conditions. It includes an explosion-proof motor for enhanced safety, a super high-pressure fuel pump for efficient performance, and a nitrogen-protected pressure reservoir for stable output. Rated Power: 3KW, Input Voltage: 380–415V, 50Hz. Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET. |
| 843 | Underwater LED Lights:-Supply,Installation,Testing and Commissioning of IP68-protected LED underwater doughnut-shaped lighting system, housed in stainless steel casing with bracket, operating on AC 24V with 108W LED lamp. It shall include a tempered glass cover and epoxy-filled waterproofing. The system shall support DMX 512 signal color control via 3-channel optical insulation, enabling dynamic color-changing with 16.7 million smooth, uniform colors, without visible lamp imaging. It shall include quick-connecting cables, 2*4 cable with IP68 T-joints and brass instant plugs, and all required accessories. Each lamp shall be provided with a separate driver in a dedicated box and a light bracket.Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET. |
| 844 | Supply,Installation,Testing and Commissioning of IP68-protected LED underwater doughnut-shaped lighting system, housed in stainless steel casing with bracket, operating on AC 24V with 36W LED lamp. It shall include a tempered glass cover and epoxy-filled waterproofing. The system shall support DMX 512 signal color control via 3-channel optical insulation, enabling dynamic color-changing with 16.7 million smooth, uniform colors, without visible lamp imaging. It shall include quick-connecting cables, 2*4 cable with IP68 T-joints and brass instant plugs, and all required accessories. Each lamp shall be provided with a separate driver in a dedicated box and a light bracket. Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET. |
| 845 | Supply,Installation,Testing and Commissioning of hydroflex top underwater opal encapsulated flexible LED strip linear light with UV and high temperature resistant polyurethane sheath, with white and miljy finish , dot free and homogeneous light emission surfac. Double cable with male/ female connections included, suitable for 24 v dc IP 68 10 watt per mtr WW as required. Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 846 | Supply,Installation,Testing and Commissioning of Constant Voltage Driver (CVD) for LED lights 24 Volts complete as required. Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 847 | Underwater Cabling:-Supply,Installation,Testing and Commissioning and digging, refilling Rubber Case with Multi-stand Copper Core (soft) 2core*6sqmm, IEC Standard Conductivity with conduit for underwater pump from Junction Box to Electrical Panel, pump to electrical panel, all electrical cabling with conduit and elbow, bend, tee, junction box, and cable from water body to control room, main feeder near control room to electrical panel feed, electrical panel to open well submersible pump, cable from electrical panel to underwater lights, etc., complete as per the electrical drawing of the fountain. Complete with all respectsincluding carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Finolex, RR, Polycab, Havells, KEI or Equivalent. |
| 848 | Supply,Installation,Testing and Commissioning and digging, refilling Rubber Case with Multi-stand Copper Core (soft) 3core*0.75sqmm, Screened for LED signal, IEC Standard Conductivity with conduit for signal transmission from Junction Box to Electrical Panel, all electrical cabling with conduit and elbow, bend, tee, junction box, and cable from water body to control room, electrical panel to LED lights, etc., Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. Make: Finolex, RR, Polycab, Havells, KEI or Equivalent. |
| 849 | Supply,Installation,Testing and Commissioning of 2-Core Outdoor Optical Fiber Cable suitable for LED signal transmission, mono-node type, designed for reliable outdoor use. The cable shall be reinforced with integrated steel wire protection for enhanced durability and resistance to physical stress, ensuring stable signal performance in harsh environmental conditions. Complete with all respects, as including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 850 | Supply,Installation,Testing and Commissioning and digging, refilling Rubber Case with Multi-stand Copper Core (soft) 4core*1.5sqmm, IEC Standard Conductivity with conduit for underwater pump from Junction Box to Electrical Panel, pump to electrical panel, all electrical cabling with conduit and elbow, bend, tee, junction box, and cable from water body to control room, main feeder near control room to electrical panel feed, electrical panel to open well submersible pump, cable from electrical panel to underwater lights, etc., complete as per the electrical drawing of the fountain. Complete with all respectsincluding carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Finolex, RR, Polycab, Havells, KEI or Equivalent. |
| 851 | Supply,Installation,Testing and Commissioning and digging, refilling Rubber Case with Multi-stand Copper Core (soft) 3core*0.75sqmm, Screened for underwater signal transmission, IEC Standard Conductivity with conduit for signal cables from Junction Box to Electrical Panel, all electrical cabling with conduit and elbow, bend, tee, junction box, and cable from water body to control room, main feeder near control room to electrical panel feed, electrical panel to LED lights, etc., complete as per the electrical drawing of the fountain. Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Finolex, RR, Polycab, Havells, KEI or Equivalent. |
| 852 | Supply,Installation,Testing and Commissioning and digging, refilling Rubber Case with Multi-stand Copper Core (soft) 3core*50sqmm, IEC Standard Conductivity with conduit for underwater pump from Junction Box to Electrical Panel, pump to electrical panel, all electrical cabling with conduit and elbow, bend, tee, junction box, and cable from water body to control room, main feeder near control room to electrical panel feed, electrical panel to open well submersible pump, cable from electrical panel to underwater lights, etc., complete as per the electrical drawing of the fountain. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Finolex, RR, Polycab, Havells, KEI or Equivalent. |
| 853 | Supply,Installation,Testing and Commissioning and digging, refilling Rubber Case with Multi-stand Copper Core (soft) 3core*6sqmm, IEC Standard Conductivity with conduit for underwater pump from Junction Box to Electrical Panel, pump to electrical panel, all electrical cabling with conduit and elbow, bend, tee, junction box, and cable from water body to control room, main feeder near control room to electrical panel feed, electrical panel to open well submersible pump, cable from electrical panel to underwater lights, etc., complete as per the electrical drawing of the fountain. Complete with all respects,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Finolex, RR, Polycab, Havells, KEI or Equivalent. |
| 854 | Supply,Installation,Testing and Commissioning and digging, refilling Rubber Case with Multi-stand Copper Core (soft) 3core*2.5sqmm, IEC Standard Conductivity with conduit for underwater pump from Junction Box to Electrical Panel, pump to electrical panel, all electrical cabling with conduit and elbow, bend, tee, junction box, and cable from water body to control room, main feeder near control room to electrical panel feed, electrical panel to open well submersible pump, cable from electrical panel to underwater lights, etc., complete as per the electrical drawing of the fountain.complete as per the electrical drawing of the fountain. Complete with all respects,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Finolex, RR, Polycab, Havells, KEI or Equivalent. |
| 855 | Supply,Installation,Testing and Commissioning and digging, refilling Rubber Case with Multi-stand Copper Core (soft) 37core*1sqmm, IEC Standard Conductivity with conduit for underwater pump from Junction Box to Electrical Panel, pump to electrical panel, all electrical cabling with conduit and elbow, bend, tee, junction box, and cable from water body to control room, main feeder near control room to electrical panel feed, electrical panel to open well submersible pump, cable from electrical panel to underwater lights, etc., complete as per the electrical drawing of the fountain. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Finolex, RR, Polycab, Havells, KEI or Equivalent. |
| 856 | Supply,Installation,Testing and Commissioning and digging, refilling Rubber Case with Multi-stand Copper Core (soft) 3core*1sqmm, IEC Standard Conductivity with conduit for underwater pump from Junction Box to Electrical Panel, pump to electrical panel, all electrical cabling with conduit and elbow, bend, tee, junction box, and cable from water body to control room, main feeder near control room to electrical panel feed, electrical panel to open well submersible pump, cable from electrical panel to underwater lights, etc., complete as per the electrical drawing of the fountain. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. Make: Finolex, RR, Polycab, Havells, KEI or Equivalent Make. |
| 857 | Control System and Accessories:-Supply,Installation,Testing and Commissioning of SMART digital real time based Power control panel. Body shall be powder coated sheet metal cabinet for indoor installation, wall mounted, dust proof and shall be with hinged doors with rubber gasket. Panel shall come with single phase prevention, phase reversal protection (in case of 3-phase pumps). Panel shall come with programmable auto-change over to ensure duty, standby pumps utilized efficiently & lights based on real time. Cabinets with necessary second-circuits appliances. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET |
| 858 | Supply,Installation,Testing and Commissioning of the 8 Universe Fountain Server for lighting and multimedia control. Having extensive DMX output capabilities with 2048 channels across 4 universes, supporting DMX output over ArtNet IV, providing up to 24576 channels. Additionally, having 8 digital outputs, 8 digital inputs, and 12 analog ports, offering flexible connectivity for various applications. Equipped with 8GB RAM and a 256GB internal NVMe M.2 SSD to ensures smooth performance and ample storage capacity. Synchronization options include SMPTE, NetTime, SNTC, and MTC. The server comes with essential accessories and a touch display for intuitive control. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 859 | Supply,Installation,Testing and Commissioning of PLC Controller With Programming, With thumb-switches as input, and 24V output to relays, meant for Manual operation of fountain, which is needed for manual testing, and also for manual operation mode. The The PLC controller is programmed to accept input signals from the thumb-switches and translate them into control signals for the fountain's various components. This programming involves defining the logic for different fountain operations such as start, stop, speed control, direction, and other relevant parameters. The thumb-switches are connected to the input terminals of the PLC controller. These switches serve as manual input devices, allowing operators to directly control the fountain's operation by toggling the switches as needed. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 860 | Supply,Installation,Testing and Commissioning of Computer, Operating System: Windows 10, CPU: Intel Core i3 7th Gen series, CPU Model: Intel Core i3 8100, with 4GB RAM, 1TB HDD storage, 15.6\\" Full HD display, integrated graphics, Wi-Fi, Bluetooth, and necessary drivers pre-installed. The laptop shall be equipped with necessary ports, including USB, HDMI, and headphone jack. Suitable for office and administrative tasks with optimal performance and reliability. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Lecco, Lenovo, Dell or Equivalent. |
| 861 | Supply,Installation,Testing and Commissioning of Digital Programming: Controlling and programming for digital nozzles' pan and tilt rotating/swinging mechanisms. The programming shall ensure precise control of nozzle movements, allowing for dynamic and synchronized water displays. The system shall integrate seamlessly with the overall fountain control, allowing for smooth operation and coordination of digital nozzles to create the desired water patterns and effects.Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 862 | Supply,Installation,Testing and Commissioning of solenoid Control Sequence and Grouping control for solenoid through Solid State Relays with fuse. Programming the solid-state relays to provide precise sequencing and grouping control of the solenoids as required by the application. Implementing interlocks or safety features in the control logic to prevent unintended activation of solenoids or to ensure proper sequencing. Designing the control system for scalability and flexibility to accommodate future expansions or modifications. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET |
| 863 | Supply,Installation,Testing and Commissioning of Fountain Software. having programming interfaces and real-time synchronization capabilities. With features for designing intricate lighting effects, integrating video content, managing audio cues, It should be compitible with industry-standard protocols like DMX, ArtNet, MIDI, and SMPTE timecode ensures seamless integration with a wide range of hardware devices, enabling users to achieve precise control and synchronization during the fountain show. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 864 | Supply,Installation,Testing and Commissioning of Fountain Programming: 20 minutes duration as per the provided music or story, including the programming of pumps, solenoid valves, LED lights, VFD, fountain control system, and solenoid valve coordination. The programming shall include the desired fountain patterns, water screens for projection, and synchronization of all elements for a seamless and engaging performance. The system shall ensure precise control of the water features, lighting, and effects, as per the provided design and operational requirements. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 865 | Supply,Installation,Testing and Commissioning of VFD. Which can withstand the harsh outdoor elements and the constant use of a fountain pump. voltage of the VFD must match the voltage of the fountain pump. The current rating of the VFD must be able to handle the current draw of the fountain pump.Heavy-duty VFD, to have accurate Height Control Power:3PHASE 415V 110KW. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: ABB, Schneider,Toshiba or Equivalent. |
| 866 | Supply,Installation,Testing and Commissioning of VFD. Which can withstand the harsh outdoor elements and the constant use of a fountain pump. voltage of the VFD must match the voltage of the fountain pump. The current rating of the VFD must be able to handle the current draw of the fountain pump.Heavy-duty VFD, to have accurate Height Control Power:3PHASE 415V 75KW. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. Make: ABB, Schneider,Toshiba or Equivalent. |
| 867 | Supply,Installation,Testing and Commissioning of VFD. Which can withstand the harsh outdoor elements and the constant use of a fountain pump. voltage of the VFD must match the voltage of the fountain pump. The current rating of the VFD must be able to handle the current draw of the fountain pump.Heavy-duty VFD, to have accurate Height Control Power:3PHASE 415V 11KW. Complete with all respects,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: ABB, Schneider,Toshiba or Equivalent. |
| 868 | Supply,Installation,Testing and Commissioning of VFD. Which can withstand the harsh outdoor elements and the constant use of a fountain pump. voltage of the VFD must match the voltage of the fountain pump. The current rating of the VFD must be able to handle the current draw of the fountain pump. Heavy-duty VFD, to have accurate Height Control Power:3PHASE 415V 3.7 KW. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: ABB, Schneider,Toshiba or Equivalent. |
| 869 | Supply,Installation,Testing and Commissioning of VFD. Which can withstand the harsh outdoor elements and the constant use of a fountain pump. voltage of the VFD must match the voltage of the fountain pump. The current rating of the VFD must be able to handle the current draw of the fountain pump. Heavy-duty VFD, to have accurate Height Control Power:3PHASE 415V 1.1 KW. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: ABB, Schneider,Toshiba or Equivalent. |
| 870 | Supply,Installation,Testing and Commissioning of VFD Control. Which can withstand the harsh outdoor elements and the constant use of a fountain pump. voltage of the VFD must match the voltage of the fountain pump. The current rating of the VFD must be able to handle the current draw of the fountain pump. Heavy-duty VFD, to have accurate Height Control. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 871 | Supply,Installation,Testing and Commissioning of DMX Amplifier DMX Booster and Splitter, with 1 input and 4-8 outputs as per need with optical insolation , input and output insulated to each other. It shall boost and distribute DMX signals to multiple lighting fixtures and amplify and regenerate DMX signals, ensuring reliable communication between a DMX controller (such as a lighting console or software) and lighting fixture. Complete with all respects including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As requiredMake: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET |
| 872 | Supply,Installation,Testing and Commissioning of DMX Transceiver Unit, designed for reliable signal conversion in fountain and lighting control systems. The unit shall feature 1-line DMX input with optical signal output, ensuring stable and interference-free communication over long distances. The device shall incorporate Suitable and Best technology for enhanced performance and durability in outdoor environments. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 873 | Supply,Installation,Testing and Commissioning of DMX Receiver/Amplifier, featuring 1-line optical input and 1-line DMX input, with 8-line power insulated DMX output for robust signal distribution. The unit is IP68 waterproof rated for reliable outdoor operation and incorporates Suitable and Best technology to ensure high performance and durability in demanding fountain and lighting control systems. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 874 | Supply,Installation,Testing and Commissioning of Digital Transformer. AC24V2000W Underwater Transformer 2KVA Ring-Transformer from 415V to 75V, To offer power for Digital Motors' Drivers. This involves mounting the transformer securely, connecting it to the power source (415V) and the load (digital motors' drivers), and ensuring proper grounding. Ensuring compatibility with the digital motors' drivers in terms of voltage requirements and load characteristics. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. Make: Fontana Fountains, Himalaya (HMF), Symphony, Crystal, WET |
| 875 | Supply,Installation,Testing and Commissioning of Control Accessory . Adequate number of relays and contactors for controlling various components of the fountain system. Ethernet, Modbus, or other communication modules for data exchange between the control panel and external systems.Surge protectors to safeguard sensitive electronic components from voltage spikes. Copper or copper alloy for optimal conductivity.Large mushroom-head emergency stop button for immediate system shutdown in case of emergencies. Having High-conductivity electrolytic copper plates. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 876 | Supply,Installation,Testing and Commissioning of Waterproof Resin/Connector/Tapes, and all other accessories. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 877 | Supply,Installation,Testing and Commissioning of Mechanical Accessories such as Screws, Nuts, Bolts for fountain. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 878 | Supply,Installation,Testing and Commissioning of Air Compressor Piping: PN 16-rated piping system complete with elbow, tee, socket, clamps, and SS ball valve for Air Shooter connection. The piping shall be suitable for high-pressure air delivery from the air compressor to air shooter units, ensuring leak-proof and durable connections. All components shall be corrosion-resistant and capable of withstanding continuous pneumatic operation. Installation shall be carried out as per the layout drawing, ensuring optimal performance and safety. Complete with all respects,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 879 | Supply,Installation,Testing and Commissioning of Stainless Steel Tee, Elbow, and Other Accessories for Fuel Pipe: Supply, installation, testing, and commissioning of SS (Stainless Steel) fittings including Tee, Elbow, Coupler, Socket, Nipples, and other necessary accessories required for fuel pipe connections. All components shall be corrosion-resistant, high-temperature and pressure-rated, ensuring safe and leak-proof operation. Installation to be done as per the approved layout and technical specifications for efficient fuel delivery and safety compliance. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 880 | Laser and Projectors :-Supply,Installation,Testing and Commissioning of Computer i7/16GB/500GB NvME, 1TB SSD, 8GB RTX GPU Windows 10 Pro. offering efficient processing power, enhanced graphical capabilities, fast storage access, and a vibrant display for Laser. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Dell, HP, Lenovo, Acer, Asus & Equivalent. |
| 881 | Supply,Installation,Testing and Commissioning of Moving Head Beam Light with an approximate 450W 17R lamp (Osram/YODN), designed for powerful beam projection over large surfaces. The fixture housing shall be constructed from flame-retardant VO plastic and die-cast aluminum. It must feature motorized linear focus with a zoom range of 3° to 30°, delivering strong beam and spot effects with fast, silent pan (540°) and tilt (270°) movement, including electronic error correction. The beam diameter should be 3.68 meters at 30 meters distance with a minimum illuminance of 2500 lux. The lamp life should be at least 15,000 hours. The fixture must include 16 DMX512 channels, master-slave mode, onboard control with a color touchscreen, and an electronic ballast for stability and energy efficiency. Gobo features should include a fixed wheel with 12+1 patterns, animation, shake, and bi-directional rotation. It must have 13 colors + white, CMY mixing, a rainbow-glow effect, a 0–100% linear dimmer, double strobe (0.5–9 t/s), and custom strobe at 0.25Hz. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 882 | Supply,Installation,Testing and Commissioning of The Pangolin FB4 Standard, coupled with QuickShow software, epitomizes cutting-edge laser control technology. With FB4's robust hardware and QuickShow's intuitive interface. Should have built-in ILDA interface and network connectivity, combined with QuickShow's versatility. Complete with all respects,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Pangolin or Equivalent. |
| 883 | Supply,Installation,Testing and Commissioning of 30-watt high-quality RGB animation laser with programmingSpecifications:Laser Power: 30 WattsColor System: RGB (Red, Green, Blue)Beam Effects: Animation, Beam Effects, and Graphic ProjectorControl Interface: Pangolin FB4 StandardSoftware: QuickShow Laser Show SoftwareScanner: High-Speed Scanner System for Precise Beam ControlSafety Features: Integrated Safety Systems Including Interlock and Key SwitchMounting Options: Adjustable Mounting Bracket for Easy InstallationOperating Modes: Standalone, Master/Slave, DMX, Art-NetControl Connectivity: USB, Ethernet, ILDA (International Laser Display Association)Dimensions: Compact and Lightweight Design for Easy Handling and TransportationPower Requirements: Standard Voltage Input (110-240V AC, 50/60Hz)Cooling System: Efficient Cooling System for Continuous Operation. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Able, LPS, Pangolin, Himalaya or Equivalent. |
| 884 | Supply,Installation,Testing and Commissioning of weather proof Laser enclosure to mount the Laser in outdoors in a SS304 body with automatic temperature and humidity control at preset levels suitable for a Laser with sliding installation tray for easy access of theLaser for maintenance. Air intake and exits to be suitably sized and protected with filters to protect the Laser from dust and insects. Custom made. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 885 | Supply,Installation,Testing and Commissioning of Accessories for lasers. (1.5mm 3 core Flat double PVC sheathed copper cable, Supply,Installation,Testing and Commissioning of fiber optic cable of required length complete with transmitter and receiver suitable for transmitting / receiving the signal upto 1Km including splicing and fixing of the fiber optic cable to the transmitter and receiver, 2.5 sq mm 2 core double PVC sheathed copper cable, 1.5 sq mm 4 core double PVC sheathed copper cable, HDMI Cable Male to Male as pre required length, HDMI Extender for required distance, Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 886 | Supply,Installation,Testing and Commissioning of Accesriess:- electrical panels, video transmitters & receivers , Rx Tx, network switch and cables and connectors to complete the projection mapping job with all respects. Custom made. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 887 | Supply,Installation,Testing and Commissioning of Integration of all Technical hardware, Installation of all harware and control systems,Projectors with 3D Projection on water screen. Integration of multimedia content with water screens & fountain systems. Custom made including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 888 | Supply,Installation,Testing and Commissioning of online Un-interruptible Power Supply system with IGBT Based rectifer and Inverter & sealed maintenance free batteries. Three phase Input and Three Phase output with Inbuilt Isolation transformer with Unity (KVA=KW) load power factor with battery, over under voltage output with over load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following capacity & with Following size of batteries for 20 Min Backup 80 KVA UPS with required Battery. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Luminous, microtek, APC or Equivalent. |
| 889 | Supply,Installation,Testing and Commissioning of a 4W RGB laser light projector with a 4,000mW laser module (1,500mW red, 1,400mW green, 1,100mW blue). The system shall produce dynamic starry sky and firefly effects with continuous color changes, supporting DMX512, network control, sound activation, and built-in programs. Housed in an IP68-rated waterproof, dustproof enclosure with efficient cooling, it shall operate on a 110–240V AC power supply. The projector shall include an adjustable bracket for easy installation and meet relevant safety certifications for outdoor use. Complete with all respects,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 890 | Supply,Installation,Testing and Commissioning of 3-Chip DLP RGB Laser Projector with a brightness range of 50,000 lumens, delivering 4K-UHD resolution (3840 x 2160) or better and a minimum contrast ratio of 6000:1 for high-quality, vibrant visuals. The projector shall support 24/7 continuous operation, feature sealed optics for complete dust protection, filterless operation, and liquid-cooled technology to ensure optimal thermal management. Minimum illumination life shall be 50,000 hours or more. Input interfaces shall include DisplayPort, HDMI 2.0, HDBaseT, and 12G-SDI, with control options such as 3D Sync In/Out, LAN, and RS-232. The unit shall be provided with a suitable lens, with a maximum weight of 42 kg and typical power consumption not exceeding 1550 watts. The projector must be suitable for mounting on a floating structure in a water body, ensuring stability and performance in such conditions. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 891 | Supply,Installation,Testing and Commissioning of Custom-Made Projector Housing designed specifically for Christie Griffyn 34K Projector, offering robust protection and functionality for outdoor and floating installations. The enclosure shall be constructed from stainless steel or aluminum alloy, with a powder-coated finish for enhanced durability and corrosion resistance. The housing shall carry an IP68 rating, featuring double-sealed construction to prevent water and dust ingress. It shall include a customized mounting system, integrated with inset air conditioning and ventilation fans, ensuring stable internal temperatures and preventing overheating while maintaining IP68 standards. The design shall allow easy access for maintenance and lamp replacement, include a secure locking mechanism, and have internal cable management provisions for neat and protected wiring. All components shall be engineered to operate within the projector’s specified temperature range and comply with relevant industry certifications. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 892 | Supply,Installation,Testing and Commissioning of 3D Projection mapping software, Playback control System to manage, schedule and control the media severs. It should have direct control on inputs and media timelines. It should have an option of being controlled by an external unit integrated with the software. to complete the job with all respects. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Coolux, Watchout, madmapper or Equivalent. |
| 893 | Audio:-Supply,Installation,Testing and Commissioning of a Biamplified, 2/3 Way Trapezoidal Point source arrayable (Progressive Directivity) speaker. The louspeaker shall meet the following criteria: Usable Frequency Range (-10 dB) of 55 Hz - 18 kHz or better & Continuous Power Handling of >=750W LF + 150W MF-HF. There shall be LF driver of at least 14\\", and 6 compression drivers of 2\\" voice coil or better in a CADS Manifold .The Loudspeaker shall have a Max. SPL (Peak) of >=127 dB or better for LF and 130dB for MF-HF. It should have Horizontal dispersion pattern of 90º or better (with multiple waveguide options) Vertical dispersion of the module shall be 10-20 degrees or better. The loudspeaker module shall be comprised of a of Baltic birch plywood construction with IP55 weather rating and shall also have built-in 70/100V Transformer of at least 400W or better. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make -L ACOUSTIC/D&B AUDIOTECHNIK/BOSE or Equivalent. |
| 894 | Supply,Installation,Testing and Commissioning of a single 18\\" subwoofer. The louspeaker shall meet the following criteria: usable Frequency Range (-10 dB) of 28 Hz - 200Hz or better. It should have an axial Sensitivity of > = 92dB (1W/1m) or more delivering a free field Max. Calculated SPL(peak) of >=127 db or better. The loudspeaker should have a nominal impedance: 4/8 ohm and continuous Power Handling of 750W or more; Complete with installation accessories as per the site requirement,The Sub-Woofer shall be of weather proof IP rating or suitable IP rating enclosure for outdoor. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Bose / L Acoustic / d&b audiotechnik or Equivalent. |
| 895 | Supply,Installation,Testing and Commissioning of digital audio DSP with 32-bit fixed/floating-point DSP 456 MHz/ARM Cortex-A8 600 MHz processor or better with following features and specifications are required:The audio DSP shall have 12 balanced inputs and 8 balanced output channels for microphone or line-level analog audio signals, each independently controllable . The DSP shall have Dante® digital audio networking up to 64 input and 64 output channels, an Ethernet connection for control and programming on an RJ-45 jack, USB audio and 8 digital channels on an RJ-45 jack.The audio DSP shall include configurable signal processing, like signal routing and mixing, equalization, filtering, dynamics, delay, room combining, as well as control, monitoring, and diagnostic tools. The audio DSP shall control and proxy all expansion devices and other Dante® endpoints.It shall have following specs : Frequency Response-18 Hz to 20 kHz (+0.8 dB/-0.2 dB ref 1 kHz) THD+N < 0.003% @ +4 dBu (A-weighted/20 Hz to 18 kHz) Channel Separation (Crosstalk) < -105 dB at +4 dBu 1 kHz input signal,Dynamic Range > 115 dB, A-weighted 20 Hz – 20 kHz, analog input to analog output. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required. Make- Symetrix/Extron/Bose or Equivalent. |
| 896 | Supply,Installation,Testing and Commissioning of 4 channel power amplifier with total of 4800W power and power sharing feature for Asymmetric power allocation. Shall support Dante Digital as well as Analog line level audio inputs and GPIO connections for muting.Power output: Upto 4x1200W @ 4 and 8 ohms, upto 4x1500W @ 2ohms,SNR: 110dB(A) or better,THD+N: <0.1 %Crosstalk (1 kHz): -70dB or better,A/D and D/A converters: 24-bit, 48 kHz,Sample rate converter: 24-bit, 44.1 kHz – 192 kHzInput-to-output signal routing: 4 × 4 matrix,signal processing: Matrix mixer, 5-band PEQ, array EQ, band pass, Spkr EQ, limiter, delays, Programmable speaker EQs,Input impedance : 20 kΩ,Status indicators: metering LEDs, system status LEDs, power status LEDs,Protections: Thermal, excess high/low AC mains voltage, DC, high‑frequency, output short‑circuit, inrush current, clip, peak, etc.Cooling system: variable-speed fan, front-to-back airflow. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make -L ACOUSTIC/D&B AUDIOTECHNIK/BOSE or Equivalent. |
| 897 | Supply,Installation,Testing and Commissioning of 24-Port Gigabit Ethernet PoE+ Smart Switch w/ optional Remote/Cloud Management and 4 SFP Ports (380W).Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 898 | Supply,Installation,Testing and Commissioning of 2-way IP55 rated (as per IEC 529) indoor/outdoor surface mounted music loudspeaker. The louspeaker shall meet the following performance criteria: Usable Frequency range (-10dB) of 65Hz to 20kHz; Power handling of 200Watt peak; Nominal dispersion of 130°(H) × 130°(V); Sensitivity of 87 dB SPL and Max SPL of 110 dB SPL peak; Nominal impedance of 8 Ohms with an Integral multi-tap Transformer with selectable tap settings of 6/12/25/50W@100V or better. The loudspeaker system shall be comprised of a powder-coated aluminum grill; 5.25-inch weather-treated woofer and 1-inch neodymium dome tweeter coaxially mounted enclosed in engineered-plastics with an In-built waveguide designed to provide uniform area coverage across the loudspeakers frequency range. UL-1480A rated . Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make -L ACOUSTIC/D&B AUDIOTECHNIK/BOSE or Equivalent. |
| 899 | Supply, installation, testing & Comissioning of intregrated low impedence Class D Amplifier with output of 2 x 50 W @ 4 Ω, 2 x 25 W @ 8 Ω ; Frequency Response - 40 Hz - 20 kHz (+0/-3 dB, @ 1 W reference 1 kHz) ; THD+N - ≤0.3 % (at full rated power) ; Channel Separation (Crosstalk) - ≤-60 dBV (below rated power, 1 kHz); A/D and D/A Converters - 24-bit / 48 kHz; Audio Latency - 10.4 ms - (any input to speaker output or aux output) ; Maximum Input Level : +10 dBV or better. 1 balanced page input, I balanced mic/line input, 2 unbalanced line; built in loudspaker EQs. Shall include output for expansion amplifier and remote controller (Wired) for source as well as volume control. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 900 | Supply,Installation,Testing and Commissioning of 22 U Equipment Rack, Locakable front glass door, cooling facility, internal wiring, front glass door, heat dessipation fans, movement wheels, power distribution units & equipment shelves as required, fully welded construction for strength. Extra-wide rackrail for cable pass-throughs to facilitate front-to-rear cabling. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make :-Mark/comrack/MX |
| 901 | Supply,Installation,Testing and Commissioning of 2 core 12 AWG/4 Sq mm, Twisted, unshielded Speaker cable with stranded annealed bare copper conductors, Semi-rigid PVC insulation, NEC CL3R, CEC CMG, RoHS compliant.Approved Brand :-Liberty/kramer/beldan including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 902 | Content:-Customised theme show with development of Show Content for duration of 20 Minutes. The theme will be given by Himachal Pradesh Tourism Development Board (HPTDB) and based on the same complete musical show shall be produced. The entire program shall be customised. The same can be modified on special occasions. The HPTDB may provide a 'brief scope\\" for the thematic video content which shall form the basis for developing a script for the video content. A detailed script formulated with brief scope shall be submitted for approval of HPTDB. The video content in first language i.e. Hindi shall be submitted for approval. The script written and its recording shall have the sole ownership of HPTDB and shall not be utilised by the bidder in any form. On location shoots and shooting with Green Chroma Shoot to create content for projection in 4k quality or equivalent. Music Direction and creation, Conceptualization, and finalization of music design for VO, Curation of BGM , special effects, foley etc for for music and foley . Sound engineering, studio voice over recording, archival sound and post editing of VO music and visuals& creation of 5.1 sound. The Show shall deliver immersive story telling experience through a minimum five(05) unique themes, including : (1) a historical narrative based on the heritage and cultural richness, (2). a devotional theme representing the spiritual legacy of Devbhoomi Himachal, (3). a wedding celebrations theme suitable for festive and romantic occasions, (4). A patrioctic and customizable theme that can be adapted for national and international observances such as Himachal Day, Independence Day , Republic Day, world Tourism Day and World Enviroment Day, (5). Animated Kid Show,. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 903 | FILTERATION SYSTEM:-Supply,Installation,Testing and Commissioning of ABS Floor Inlets 50 mm dia as required,Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 904 | Supply & Fixing of 300 x 300 mm Dia Main Drain in SS 304 Gr to produce water effect complete including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (The Fountainers.) |
| 905 | Supply & Fixing of 40 mm dia Water Defuser Nozzles in SS 304 Gr to produce water effect complete as required.Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (The Fountainers Make.) |
| 906 | Supply & Fixing of 1200 x 900 mm Dia Debris Collection Strainer in SS 304 Gr to produce water effect complete as required.Complete with all respects,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required (The Fountainers.) |
| 907 | Supply,Installation,Testing and Commissioning of Stainless steel 304 gr overflow skimmer with required mesh for screening of water complete as required, Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required |
| 908 | FILTERATION PUMPS:-Supply,Installation,Testing and Commissioning of 7.5 HP 100x100 mm Horizontal openwell monoblock pump set, 2900 RPM cast iron casing / impeller , SS 304 Shaft complete as required , Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. Capacity = 1800 LPM.Head = 12 Mtrs |
| 909 | Supply,Installation,Testing and Commissioning of 10 HP 100x100 Horizontal openwell monoblock pump set, 2900 RPM cast iron casing / impeller , SS 304 Shaft complete as required , Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. Capacity = 2100 LPM.Head = 14 Mtrs |
| 910 | Supply,Installation,Testing and Commissioning of 2000 mm Dia FRP pressure High rate Sand Filter for filteration of suspended material from water body complete with valve batry for filter, backwash, rinse, waste, recirculate and close all flow to pool the filter body manufactures in fibre glass with uV. resistance surface provided with oil pressure guage, pressure 2.5 Kg/sqcm including cost of silica sand for filter with granulometry between 0.4 mm - 0.8 mm complete as required. Complete with all respects, as per direction & approved by Engineer in charge. Make: Pentair,Aqvastar or Equivalent. |
| 911 | PUMPS:-Supply,Installation,Testing and Commissioning of Submersible Pump an industrial-grade pump powered by a 3-phase motor, typically designed to operate at a voltage of 380-415V and utilizes a Direct-On-Line (DOL) starting mechanism for simple and efficient operation. It is ideal for medium-duty fluid transfer applications such as water treatment, irrigation, and industrial processes. With a head discharge capacity of up to 40-60 meters (depending on the specific model and application), the pump is built to handle moderate to high-pressure requirements, delivering reliable performance in various fluid handling systems. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 912 | Supply,Installation,Testing and Commissioning of Pump for large spray height robust wet running canned motor with high volume filter basket suitable for high delivery height in Stainless steel construction of suitable capacity for running on 50 HZ 415 Volt AC Supply Minimum 4KW, Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 913 | AIR COMPRESSOR AND AIR STORAGE TANK:-Supply,Installation,Testing and Commissioning of Air Compressor for creating 10 Bar of suitable capacity, Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 914 | Supply,Installation,Testing and Commissioning 1/2 inch Valve/hose/fitting set for Air Nozzle, Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 915 | Supply,Installation,Testing and Commissioning pressurised Air Tank 3000L @10 bar, Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 916 | Supply,Installation,Testing and Commissioning Pressurised Air Tank 5000L @10 bar, Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 917 | WATER LEVEL CONTROLLER AND ANEMOMETER:-Supply,Installation,Testing and Commissioning of Water Level sensor 20-4 ,Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 918 | Supply,Installation,Testing and Commissioning of Anemometer K , Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 919 | Earthing Protection System:-Supply,Installation,Testing and Commissioning Earthing with copper earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 920 | Providing and fixing 25 mm X 5 mm copper in 40 mm dia G.i. pipe from earth electrode including connection with G.I. nut, bolt, spring. washer excavation and re-filling etc. as required. Complete with all respects,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 921 | Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. Complete with all respects, including carriage of materials up to all lead and lift and as per direction of Engineer in charge. |
| 922 | Supply,Installation,Testing and Commissioning of a complete earthing system comprising maintenance-free chemical earthing using copper-bonded earth electrodes of 17.2 mm diameter and 3-meter length. Each electrode shall be installed with a suitable carbon-based backfill compound to ensure low resistance and reliable performance in high-resistivity soil conditions. The scope shall include connection of the earthing system to all fountain-related electrical equipment such as control panels, VFDs, lighting fixtures, pumps, musical fountain controllers, and metal bodies to ensure personnel and equipment safety. All connections shall be made using copper strip (25 mm x 3 mm) or copper cable (minimum 16 sq.mm) based on the load requirement. Each earth pit shall be provided with a precast RCC inspection chamber and heavy-duty cover for maintenance access. The earthing system shall be designed and tested to achieve earth resistance below 1 Ohm and shall comply with IS 3043 and applicable local electrical safety standards. The item shall include all associated excavation, backfilling, termination, and testing. Complete with all respects,including carriage of materials up to all lead and lift and as per direction of Engineer in charge. As required Make: Ashlok, JMV, ABB or Equivalent. |
| 923 | Operation & Maintenance |
| 924 | O&M for 1st Year- Defect liability period (DLP) |
| 925 | O&M for 2nd Year |
| 926 | O&M for 3rd Year |
| 927 | O&M for 4th Year |
| 928 | O&M for 5th Year |
| 929 | O&M for 6th Year |
| 930 | O&M for 7th Year |
| 931 | O&M for 8th Year |
| 932 | O&M for 9th Year |
| 933 | O&M for 10th Year |
| 934 | Provisional sumThe comparison of bid shall be done exclusive of provisional sum. The cost shall include cost of Environmental testing etc.a handling fee of 5% (five percent) shall be payable to the contractor on the actual cost of any approved expenditures under as Provisional sum items1 Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
| 7 | Click here to download tender document | Tender Documents |
| 8 | Click here to download tender document | Tender Documents |
| 9 | Click here to download tender document | Tender Documents |
| 10 | Click here to download tender document | Tender Documents |
| 11 | Click here to download tender document | Tender Documents |
| 12 | Click here to download tender document | Tender Documents |
| 13 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
