|
| 1 | Demolishing interlocking pavers covering including stacking of serviceable material and disposal of unserviceable material within 50 metres lead and lifts, including all incidental charges as per direction of Engineer- in- charge. |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead and lifts, including all incidental charges as per direction of Engineer- in- charge. |
| 3 | Providing and laying Plain Cement Concrete nominal mix 1:5:10 (one cement isto five sand isto ten graded stone aggregate 40mm (fourty milimeters) nominal size) Mechanically mixed, vibrated and curing complete in open foundations and plinths for all type of structure including the cost of form work complete as per drawing and MORD Technical Specification clause 802, 803, 1202 and 1203 (Eight hundred two, eight hundred three, one thousand two hundred two and one thousand two hundred three) as per the direction of the Engineer-in-charge, including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royalty, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government. |
| 4 | Providing and laying cement concrete 1:2:4(1 cment:2sand:4graded stone aggt. 20mm (twenty milimeter) nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth but including carriage of materials within all leads and lifts.as per the entire satisfaction and direction of Engineer-in-Charge as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges. |
| 5 | Brick work with common burnt clay machine moulded with F.P.S.(non modular) perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) as per H.P. PWD. specification including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges. |
| 6 | Providing Tor Steel reinforcement for reinforced cement concrete work including bending binding and placing in position including cost of binding wire complete up to all floor levels/all heights Tor Steel/TMT. as per the entire satisfaction and direction of Engineer-in-Charge as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges including |
| 7 | Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position in Second class teak wood wood as per H.P.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. |
| 8 | Providing and fixing 19 mm thick commercial board water proof shutter for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of material in all leads and lifts, including all incidental charges. |
| 9 | Providing and fixing 19 mm thick commercial board water proof in shelves, lining, box for cup boards with butt joints fixed with nails and screws etc complete including carriage of material in all leads and lifts, including all incidental charges. |
| 10 | Providing and fixing square edged cover fillets (beading) 19 x 6 mm section including mitring at junction with wooden screws / nails etc complete of hard wood including carriage of material in all leads and lifts, including all incidental charges. |
| 11 | Providing and fixing 0.80 mm thick coloured or plain laminated sheet (sunmica) on boards / ply wood sheets with approved adhesive and nails complete including carriage of material in all leads and lifts , including all incidental charges. |
| 12 | Providing and fixing 75mm (Seventy five) millimeters size aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. |
| 13 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 14 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 15 | Providing and fixing M.S. BP Sheet 2mm (two milimeter) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge(Base members of steel work shall be measured and paid separately). as per the direction of Engineer-in-Charge.and as per HP.PWD. Specification 1990 volume-I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. |
| 16 | Providing and fixing 0.60mm(zero point sixty milimeter) thickness prepainted steel sheet roofing over steel members/trusses, prepainted galvanised steel of TATA Durashine hot dip metalic zinc coated sheet with the top coat of regular modified polyster (RMP)organic coating of 20(twenty)micron over 5(five) micron runner plus back coat of polyster of micron over 5(fi e) microns primer coating (having 1060 mm(one thousand sixty milimeter) covered with over all width 1126mm(one thousand one hundred twenty six milimeter) as per the direction of Engineer-in-Charge and as per HP.PWD. Specification 1990 volume-I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. |
| 17 | Providing ridges or hips 60 cms(sixty centimeters) overall 0.60mm(zero point sixty milimeter) thickness in prepanted galvanised steel hot dip metalic zinc coated sheet TATA Durashine with the top coat of regular modified polyster (RMP) organic coating of 20(twenty)micron) over 5(five)micron runnerplus back coat of polyster of micron over 5(five) microns primer coating (having 1060 mm(one thousand sixty milimeter) covered with over all width 1126mm(one thousand one hundred twenty six milimeter)fixed with J or L hooks 8mm(eight milimeter) dia with limpet and bitumen washers complete as per the direction of Engineer-in-Charge.and as per HP.PWD. Specification 1990 volume-I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. |
| 18 | Providing and fixing on wall face PVC rain water pipes 110 mm diameter metre conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 19 | 15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior/exterior plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in Cement Mortar 1:6 (1Cement:6 Sand )as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts. |
| 20 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 21 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per direction of Engineer in Charge and as per HP.PWD. Specification including carriage of all labour, equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges. |
| 22 | Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all lead & lifts and all incidental charges. |
| 23 | Providing and laying factory made chamfered edge existing Cement Concrete 80mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern in footpath, parks, lawns, drive ways or light traffic parking only (Labour rate) etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
