|
| 1 | Providing Sal wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.as per H.P.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. |
| 2 | Providing and fixing Second class teak wood 35 mm thick glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws complete as per H.P. PWD. specification including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges. |
| 3 | Providing and fixing 25 mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters M.S. Piano hinges . (for cupboard) including ISI marked nickel plated bright finished IS : 3818 marked with necessary screws complete as per H.P. PWD. specification including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges. |
| 4 | Providing and fixing Second class teak wood wire gauge shutters using galvanized mild steel wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 for door, windows and clear story windows with hinges and necessary screws 35mm (thirty five millimeter) thick second class teak wood as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. |
| 5 | Providing and fixing 25 mm thick (Twenty Five Millimeter) Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) as per H.P.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. |
| 6 | Providing and fixing anodized Aluminum Sliding Door Bolts 300*16 (Three hundred* Sixteen) millimeters size anodized transparent or dyed to required shade and color with screws etc. Complete as per direction of Engineer in Charge as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. |
| 7 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. |
| 8 | 125mm (One hundred twenty five) millimeters size |
| 9 | 100mm (One hundred ) millimeters size |
| 10 | Providing corrugated G.S. sheet 1.00 mm thick with zinc coating not less than 275 gm/m² roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per HP.PWD. specification including carriage of all labour quipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 11 | Providing and fixing plain multipurpose 6 mm thick Cement fiber board as per IS: 14862 (Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately) as per H.P.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. |
| 12 | Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete as per HP.PWD. Specification 1including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts. |
| 13 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per direction of Engineer in Charge and as per HP.PWD. Specification including carriage of all labour, equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges. |
| 14 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications painting wood work with deluxe multi surface paint of required shade. Two or more coat applied @ 1.25 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges. |
| 15 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture. |
| 16 | Distempering One coat with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour as per direction of Engineer in Charge and as per HP.PWD. Specification including carriage of all labour, equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges. |
| 17 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete on steel work as per direction of Engineer in Charge and as per HP.PWD. Specification including carriage of all labour, equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges. |
| 18 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. |
| 19 | Repairs to plaster in patches of 2.50 sqm. (two point five zero square meter ) and under and 10 to 15mm (ten to fifteen millimeter) thick with cement mortatr 1:4 (one cement is to four sand) including cutting the patches in proper shape and re-plastering the surface of the wall including disposal of rubbish to the dumping ground within all lead as per direction of Engineer-in-Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 20 | Providing and fixing White Vitreous China Wash basin size 550x400 mm with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required as per HP.PWD specification including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges. |
| 21 | Providing and fixing W.C. pan with ISI marked white solid plastic seat and lid white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required as per HP.PWD specification including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges. |
| 22 | Providing and fixing 32 mm (thirty milimeters) dia Semi rigid P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges. |
| 23 | Providing and fixing 100 mm sand cast Iron grating for gully trap as per HP.PWD specification including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges. |
| 24 | Providing and fixing 600mmx450mm (six hundred into four hundred fifty milimeter) beveled edge mirror of superior glass mounted on 6mm(six milimeters thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers as per HP.PWD specification including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges. |
| 25 | Providing and fixing 600x120x5 mm (six hundred into one hundred twenty into five millimeter) Glass Shelf with C.P. Brass bracket and guard rail complete,with 40 mm long screws, rawl plugs etc or equivalent as per HP.PWD specification including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges. |
| 26 | Providing and fixing toilet paper holder C.P. brass as per HP.PWD specification including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charge |
| 27 | Providing and fixing 15 mm (fifteen milimeters) nominal bore brass stop cock of standard design and of approved make conforming to as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 28 | Providing and fixing 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gmsPTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour as per HP.PWD specification including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges. |
| 29 | Providing and fixing 15 mm (fifteen milimeters) nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. Please Enable Macros to View BoQ information |
