|
| 1 | Safe carriage loading unloading with proper stacking of following material from ESC Daliganj to Work Site/JE dump store. |
| 2 | 250 KV T/F |
| 3 | ABC 3x120/3x95/3x50 Sqmm |
| 4 | Single Core Cable 1x400 Sqmm |
| 5 | 11 kv XLPE Cable 3x70/3x120/3x185 Sqmm |
| 6 | ID/OD cable jointing kit 3x70/3x120/3x185sqmm |
| 7 | Distribution Box 3 Phase |
| 8 | Laying of 3X185 sq.mm 11 KV XLPE cable by drill method (single circuit) as per RESPO Norms with HD Pipe. (Only 11 KV XLPE cable supplied by Department.) |
| 9 | Well type/Bore type earthing of with 60 Fit Deep boring and providing GI Pipe 1.5\\" dia (\\"B\\" Class) and earthing must be joint by G.I. Strip of 32x5 mm thick long attached with nut & bolts and GI pipe cap. All material and labour shall be supplied the contractor. |
| 10 | Construction of T/F plinth of size 2x2x1.2 mtr with the help first class brick & masonry in the ratio 1:4 cement & sand coarse. Filling the structure completely per norms with RCC to 1:2:2 cement & stone grit with MS bar and MS channel for resting transformer. |
| 11 | Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mesh. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I. |
| 12 | Dismantling of 63/100 KVA T/F opening jumbers, LT cable and Other accessories of T/F including Safe loading, unloading Carriage from site to JE dump Store/Center Store. |
| 13 | Fabrication, errection & commissioning of 250 KVA T/F on Plinth with all accessories. All material except 250 KVA T/F shall be supplied by the Contractor. |
| 14 | High pressure testing of 11/33 KV 3x70/3x185/3x300 XLPE cable along with arrangement of High Pressure equipment. |
| 15 | Proper laying & commissioning of (3x50/3X95/3X120 sq.mm) Aerial Bunched Conductor. Only ABC Provided by deptt. |
| 16 | Chemical Earthing system with outer pipe diameter 50mm, inner Strip 40x6, length 3000 mm. galvanization up to 200 micro, earthing pipe with crystalline conductive mixture filled inside the pipe with anti-corrosion & high conductive along with 50 Kg(As per required) of BFC which should be capable to reducing the soil resistively with good moisture retaining capacity.(Specification of chemical earthing and drawing is hereby enclosed). All material shall by supply by the contractor. |
| 17 | Supply and installation of missionary type less fuse unit 03 No. I/C, 02 O/G and suitable iron gate, including all accessories like CU. Bus bar spring contact back entry. |
| 18 | Construction of masonry/metallic type distribution pillar of size 1x1.5x2.5 mtr. with supply & fixing of fabricated 4 nos. doors (2ft.x4ft.) made of BP sheet of 18 SWG with locking arrangement, 2 Nos. Straight MS angle 50x50x6mm (1800 mm long) 2 nos. 500 Amp, 3 Nos. 300 Amp Henley Type tailless fuse Unit, 3 Nos copper bus bar of size 1000x50x6 mm and one No. Alum busbar 1000x50x6 mm including all civil material required for work. All material shall be supplied by contractor. Please Enable Macros to View BoQ information |
