|
| 1 | Galvanized Lattice steel tower Superstructure |
| 2 | i) B+0 type (3.698 per, 1 nos) |
| 3 | GI Nuts and Bolts for tower superstructure |
| 4 | i) B type (0.2368 per, 1nos) |
| 5 | Galvanized stub sets |
| 6 | i) B+0 type (0.278 per, 1 nos) |
| 7 | GI Nuts and Bolts for stub |
| 8 | i) B type 1 nos. |
| 9 | Galvanized setting template |
| 10 | i) B type |
| 11 | GI Nuts and Bolts for template |
| 12 | i) B type |
| 13 | Power conductor and accessories |
| 14 | (i)ACSR Panther Conductor |
| 15 | (ii)Stock bridge type vibration damper |
| 16 | (iii) Mid-Span Compression Joint |
| 17 | (iv)Repair Sleeve |
| 18 | OPGW accessories |
| 19 | 24 fibre (DWSM) OPGW fibre optic cable |
| 20 | Vibration Damper C/W preformed armoured rod |
| 21 | Down lead clamp |
| 22 | Optical splice kit including Junction Box |
| 23 | OPGW double Tension Assembly for splicing location c/w preformed armour rods and tower bond clamp |
| 24 | Insulator and Hardware fittings |
| 25 | Single tension hardware fittings including tension clamp for ACSR Panther complete with all accessories. |
| 26 | 90 KN disc insulators |
| 27 | Single suspension hardware fittings including tension clamp for ACSR Panther complete with all accessories. |
| 28 | 70 KN disc insulators |
| 29 | Tower Line Accessories |
| 30 | Supply of Danger plate |
| 31 | Supply of phase plate |
| 32 | Supply of number plate |
| 33 | Supply of Anti climbing device |
| 34 | Galvanized Lattice steel tower Superstructure |
| 35 | i) B+0 type (3.698 per, 1 nos) |
| 36 | GI Nuts and Bolts for tower superstructure |
| 37 | i) B type (0.2368 per, 1nos) |
| 38 | Galvanized stub sets |
| 39 | i) B+0 type (0.278 per, 1 nos) |
| 40 | GI Nuts and Bolts for stub |
| 41 | i) B type 1 nos. |
| 42 | Galvanized setting template |
| 43 | i) B type |
| 44 | GI Nuts and Bolts for template |
| 45 | i) B type |
| 46 | Power conductor and accessories |
| 47 | (i)ACSR Panther Conductor |
| 48 | (ii)Stock bridge type vibration damper |
| 49 | (iii) Mid-Span Compression Joint |
| 50 | (iv)Repair Sleeve |
| 51 | OPGW accessories |
| 52 | 24 fibre (DWSM) OPGW fibre optic cable |
| 53 | Vibration Damper C/W preformed armoured rod |
| 54 | Down lead clamp |
| 55 | Optical splice kit including Junction Box |
| 56 | OPGW double Tension Assembly for splicing location c/w preformed armour rods and tower bond clamp |
| 57 | Insulator and Hardware fittings |
| 58 | Single tension hardware fittings including tension clamp for ACSR Panther complete with all accessories. |
| 59 | 90 KN disc insulators |
| 60 | Single suspension hardware fittings including tension clamp for ACSR Panther complete with all accessories. |
| 61 | 70 KN disc insulators |
| 62 | Tower Line Accessories |
| 63 | Supply of Danger plate |
| 64 | Supply of phase plate |
| 65 | Supply of number plate |
| 66 | Supply of Anti climbing device |
| 67 | Setting of Stub (Sets of four) including transportation and Distribution of Stubs & accessories from store to site excluding cost of excavation, concreting and back filling |
| 68 | (i) Angle Tower B+0 Type |
| 69 | Super structure erection including transportation of structures by any means and distribution of structure and accessories from stores to site excluding fixing of Danger plate, Number plate, Anti-Climbing device, Hoisting of insulators and paintings if any as per direction of site Engineers |
| 70 | (ii) Angle Tower B+0 Type |
| 71 | Stringing of power conductors including transportation from stores and distribution of conductors and accessories to site and laying, stringing, tensioning, clamping, jointing, jumpering and hoisting of insulators complete including cost of all fittings and accessories not specifically mentioned elsewhere per route Km (3 conductors as applicable) of line |
| 72 | Stringing of OPGW including transportation and distribution of ground wire and accessories to site and laying, stringing, tensioning, clamping, jointing complete including all fittings and accessories not specifically mentioned elsewhere per route Km of line |
| 73 | Grounding of Towers with 3 Metre long 25 mm dia GI pipe including cost of all materials such as GI pipes, GI bolts & Nuts and washer, salt, coal etc.as per specification |
| 74 | Painting of Towers with bituminous paints of approved quality up to 3 metres from ground level including the cost of paints. |
| 75 | Danger plates (1No per tower) |
| 76 | Erection of phase plate |
| 77 | Erection of Number plate(1No per tower) |
| 78 | Erection of anti-climbing device (1 set per tower) |
| 79 | Welding of all nut & bolts up to the bottom cross arm level including all charges of transportation, materials etc. |
| 80 | (ii) B+0 Type |
| 81 | Check Survey as per Specification |
| 82 | Construction of pile foundation |
| 83 | Mobilization (including preparation of work space, approach road, dewatering, arrangement of electricity, jungle clearing, earth filling and making all arrangement for completion of the work) for construction and supply of all materials & labours of LS temporary island/platform to facilitate the construction of foundation including platform for storage of construction materials such as stone chips, sand, cement, steel reinforcement bar, mixture machines, tools & plants all foundation materials keeping & mixing |
| 84 | Boring, providing and installation of bored cast in situ pile of 1200mm diameter below the pile head with M25 grade of cement concrete including the cost of reinforcement steel, cost of boring with temporary quick casting bentonite solution. (Length of pile for payment shall be measured from the bottom of the pile head). All necessary labour, materials, plants and tackles etc complete as necessary for proper execution of the job upto 8.00 meter from the bottom of the pile head, The unit rate include excavation, dewatering, socketing, anchoring (if required), backfilling, form work for placing plain or reinforced concrete cement, supply and providing MS liner of 6mm thcik in piles upto 8 meter depth from the bottom of the ground level. All execution should be as per approved drawing. (Payment will be made as per actual length of the piles as per site condition) |
| 85 | Providing and laying M25 grade concrete of specified 28 days strength for pile head, tie beam, chimney including reinforcement steel, form work, scaffolding for all level as per site necessary, all necessary materials and equipments, transportations, batching, mixing, vibration, dewatering etc as per approved drawings and directionPile Head: 4 × 3.14 × 0.6 × 0.6 × 2 = 9.04 CUMTie Beam: 4 × 5.5 × 0.4 × 0.6 = 5.28 CUMTotal = 14.32 CUM |
| 86 | Conducting pile integrity test on piles using electronic control unit, hand held hammer, accelerometer, computer with required software to assess as-installed pile characteristics including mobilization of necessary manpower, equipment, materials etc required for successful completion of the job |
| 87 | Opening and lowering of the conductor from the portion to be dismantled and transportation to the store |
| 88 | ERS Tower materials sorting, Loading for 1(One) no of ERS and allied accessories from Kahilipara store and unloading at nearest motorable spot of Site Camp. (Weight- 7.7 MT) |
| 89 | Carrying of ERS materials from site camp to worksite by head loading. |
| 90 | Preparation and leveling of of ERS installation site |
| 91 | Sorting and loading of ERS and T&P material |
| 92 | Anchoring including Excavation for 5 nos. of Anchors |
| 93 | Installation/Erection of ERS Tower |
| 94 | Stringing of conductors (three nos.) in ERS tower including changing of damaged insulators, jointing and repairing of the conductors |
| 95 | Opening, repairing and refitting of jumpers |
| 96 | Dismantling of conductors (Three Nos.) from ERS |
| 97 | Dismantling of ERS Tower including de-anchoring |
| 98 | Carrying of ERS matrials from worksite to site camp by headloading |
| 99 | ERS Tower materials sorting, Loading for 1(One) no of ERS and carrying from nearest motorable spot of Site Camp to Kahilipara and unloading.(Weight- 7.7 MT) Please Enable Macros to View BoQ information |
