|
| 1 | building maintenance |
| 2 | 6.1.2:Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 3 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 4 | 13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) |
| 5 | 13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 6 | 14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand) |
| 7 | 13.48.1:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm |
| 8 | OD175676/2025-2026:Finish walls with Acryllic Smooth exterior paint of required shade: Old work ( Two or more coats applied @ 1.67 ltr/10 sqm) on existing cement paint surface |
| 9 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 10 | 15.56:Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 11 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 12 | OD316340/2025-2026:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site |
| 13 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 14 | 4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3graded stone aggregate 20 mm nominal size derived from natural sources) |
| 15 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 16 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 17 | 10.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 18 | 50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete |
| 19 | OD451248/2025-2026:Sand blasting for cleaning the surface of concrete and reinfocement before guniting, Sand blasting is done by spraying dry coarse sand to the spalled concrete surface under high presssure to get a fresh surface for guniting all as per the instruction of engineers in charge. |
| 20 | OD451249/2025-2026:Supply and application of anti corrosive zinc rich primer over the exposed steel reinforcement as per the manufactures specification and as directed by engineer in charge |
| 21 | OD453520/2025-2026:Guniting concrete surface with cement mortar applied with compressor after cleaning surface and spraying with epoxy complete as per Technical specification. |
| 22 | OD451250/2025-2026:Labour ,Equipment hire and supervision charges for chipping and removing loose concrete layer form beams and columns, in order to expose the existing reinforcement and cleaning the surface dust free, all complete as per the instructions of Engineers in charge |
| 23 | OD451251/2025-2026:Supply and application of anti corrosive zinc rich primer over the exposed steel reinforcement as per the manufactures specification and as directed by engineer in charge |
| 24 | OD451252/2025-2026:Supply and application of tack coat of Epoxy bonding agent Rearm Bond Ep on Existing concrete surface, after cleaning the surface dust free, all complete as per instruction of Engineer in charge |
| 25 | OD451253/2025-2026:providing & fixing water tight shutters by allowings 60mm clear cover from existing concrete surface with necessery support, all complete as per the instructions of Engineer in charge |
| 26 | OD451254/2025-2026:Providing & Pouring free flow micro concrete Rearm Crete MC mfd by M/s MYK Arment, After mixing the same with water and 6mm down aggregate @ 10% by weight of micro concrete. water base curing compound shall be applied immediately after shutter removal, allcomplete as per the instrctions of Engineers in charge |
| 27 | OD453553/2025-2026:Supplying and erecting Ready made RCC Ring Size 1200mm Dia, 75mm Thick and 450mm Depth including Cost and Conveyance charge of Materials for Concrete, Reinforcement and Shuttering work... etc complete. Please Enable Macros to View BoQ information |