|
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority: Superintending Engineer(TW), Jodhpur Discom, Jodhpur Name of Work: “Supply, erection, testing and commissioning of material/equipment for 17.00 Km Single circuit O/H 33 KV line with ACSR Dog Conductor T-off from 33 KV NEWA feeder, 02 nos new 33 /11 KV Sub-station IGNP-II and IGNP-III,110.65 km single circuit O/H 11 KV line with ACSR Rabbit conductor and 53 Nos. new 11/0.4 KV sub-stations on turnkey basis in Bap area as applied by XEN IGNP, Division-24 Phalodi”, under AEN(O&M) Bap, Phalodi Circle, Jodhpur Discom, Jodhpur, against deposit Work. Contract No: TNTW-789 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE FOR SUPPLY OF MATERIAL & EQUIPMENT(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No. Item Description Item Code / Make Quantity Units Base Rate in Rs./unit (Unit Supply Rate Inclusive of All Components & taxes, duties, transportation etc.) as per SIR October'2025 Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Total GST Amount @18% VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes inRs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | A. 33KV New line (17.00 KM SINGLE CIRCUIT O/H) |
| 3 | Supply of PCC Pole 9.0 Mtr. Long working load 400Kg. |
| 4 | 33 KV Lattice Structure 36' LONG WITH CROSS ARMS WITH NUT BOLT SINGLE CIRCUIT |
| 5 | 33 KV Porcelain Pin Insulator |
| 6 | Supply of 33 KV G.I. Pin |
| 7 | Supply of GI stay sets, 20 mm dia, 2.4 mtrs long stay rod, 380 x380x4 mm anchor plate |
| 8 | Supply of G.I. Stay Wire (7/8 SWG, 7/4.00 mm) |
| 9 | Supply of 33 KV Guy/Stay Insulator(140x85x25 mm) |
| 10 | Supply of Stay Clamp, suitable for 9 Mtr. PCC Pole 400 Kg |
| 11 | Supply of M.S. Rod Type Earthing Set |
| 12 | Supply of G.I.Earth wire 6 SWG (5 mm) |
| 13 | Supply of ACSR DOG conductor |
| 14 | Supply of M.S, Nuts & Bolts, size, 16 mm(Assorted length) |
| 15 | Supply of 11 KV Disc Insulator (B&S Type, 45 KN) |
| 16 | Supply of 11 KV Disc Hardware (B&S Type, 45 KN) |
| 17 | Supply of 33KV GO double break without EB Isolator (with 18 x 24 KV Post Insulator ) 800 Amp. |
| 18 | Supply of Extension bracket along with accessories for 9 Mtr. Pole |
| 19 | Supply of M.S. Channel 100x50x5 mm SAIL for Misc. work |
| 20 | Supply of M.S. Angle 75x75X 6 mm |
| 21 | Supply of PG Clamp for Dog Conductor |
| 22 | 33 KV Danger Plate |
| 23 | B. 33/11KV Substation(02 Nos.) |
| 24 | Supply of PCC Pole 9.0 Mtr. Long Working Load 400 Kg. |
| 25 | Supply of PCC Pole 9.0 Mtr. Long Working Load 200 Kg. |
| 26 | Supply of 33/11KV S/S structure (Rural) |
| 27 | Supply of 11/0.4KV S/S structure set weight (166.746 Kg) Approx. |
| 28 | Supply of 30 KV 10 KA Station class heavy duty Metal Oxide (Gapless) Surge Arrester(LA)(1 set=3 No.) station class |
| 29 | Supply of 33 KV GO double break without EB Isolator (with 18 x 24 KV Post Insulator ) 800 Amp. |
| 30 | Supply of 33 KV HG Fuse set with 2x24 KV PI ( 1 Set=3 Nos) |
| 31 | Supply of 33 KV Porcelain Pin Insulator |
| 32 | Supply of 33 KV G.I. Pin |
| 33 | Supply of 11 KV Disc Insulator (B&S Type, 45 KN) |
| 34 | Supply of 11 KV DiscHardware (B&S Type, 45 KN) |
| 35 | Supply of 11 KV GO double break without EB Isolator (with 9 x 24 KV Post Insulator ) 400 Amp. |
| 36 | Supply of 11 KV HG Fuse set with 1x24 KV PI ( 1 Set=3 Nos) |
| 37 | Supply of 9 KV 10 KA Station class heavy duty Metal Oxide (Gapless) Surge Arrester(LA)(1 set=3 No.) station class |
| 38 | Supply of ACSR DOG Conductor |
| 39 | Supply of PG Clamp for Dog Conductor |
| 40 | Supply of M.S, Nuts & Bolts, size, 16mm (Assorted length) |
| 41 | Supply of M.S. Rod Type Earthing Set |
| 42 | Supply of M.S.Pipe Type Earthing Set (GI type) |
| 43 | Supply of M.S. Flat 50 X 6 mm for earthing |
| 44 | Supply of M.S. Channel 100x50x5 mm SAIL for Misc. work |
| 45 | Supply of M.S. Angle 75x75X 6 mm |
| 46 | TP MCCB 40 Amp |
| 47 | Supply of 33 KV Danger Plate |
| 48 | C. 11 KV interconnection Total 110.65 km on ACSR RABBIT Conductor |
| 49 | Supply of PCC Pole 9.0 Mtr. Long Working Load 200 Kg. |
| 50 | Supply of 11 KV Cross Arm with Top Hamper |
| 51 | Supply of 11 KV double pole line structure set |
| 52 | 33 KV Lattice Structure 36' LONG WITH CROSS ARMS WITH NUT BOLT SINGLE CIRCUIT |
| 53 | Supply of GI Stay set of 1.8 m long, 16 mm diameter |
| 54 | Supply of 11 KV Stay/Guy Insulator |
| 55 | Supply of G.I. Stay Wire 7/10 SWG |
| 56 | Supply of Stay Clamp, suitable for 9 Mtr. PCC Pole 200 Kg |
| 57 | Supply of ACSR Rabbit conductor |
| 58 | Supply of 11KV Pin insulator |
| 59 | Supply of 11KV GI Pin |
| 60 | Supply of 11 KV Disc Insulator (T&C Type, 45 KN) |
| 61 | Supply of 11 KV DiscHardware (T&C Type, 45 KN) |
| 62 | Supply of G.I.Earth Wire 8 SWG (4 mm) |
| 63 | Supply of Extension bracket along with accessories for 9 Mtr. Pole |
| 64 | Supply of M.S. Channel 100x50x5 mm SAIL for Misc. work |
| 65 | Supply of M.S. Angle 75x75X 6 mm |
| 66 | Supply of M.S. Rod Type Earthing Set |
| 67 | Supply of M.S, Nuts & Bolts, size, 16 mm(Assorted length) |
| 68 | 11 KV Danger Plate |
| 69 | D. Supply of new 53 nos. of 11/0.4 KV S/S |
| 70 | SUPPLY OF PCC POLE 9 Mtr. LONG (200KG) |
| 71 | SUPPLY OF 11/0.4 KV S/S STRUCTURE 166.746 KGS |
| 72 | SUPPLY OF ISOLATING SWITCHES 11KV 400A W/O EB WITH PI |
| 73 | SUPPLY OF 11 KV 3 phase D.O. fuse set cum isolator |
| 74 | SUPPLY OF G.I. STAY SET 16 X 1800mm |
| 75 | SUPPLY OF G.I STAY WIRE 7/10 S. W.G.(7/3.15mm) |
| 76 | SUPPLY OF 11KV STAY INSULATOR |
| 77 | Supply of 11 KV Disc Insulator (T&C Type, 45 KN) |
| 78 | Supply of 11 KV DiscHardware (T&C Type, 45 KN) |
| 79 | SUPPLY OF STAY CLAMP SUITABLE FOR 9 Mtr PCC POLE 200KG |
| 80 | SUPPLY OF M.S ROD TYPE EARTHING SET |
| 81 | SUPPLY OF M.S. NUT & BOLTS 2''x5/8 (16x50mm) |
| 82 | Note-(1)The unit base rate for supply of material mentioned in column No. 5 is inclusive of GST @ 18% and freight, insurance & transportation charges of all items (2) The sucessful bidder shall furnish price break up in format provided by this office with acceptance of LoI. (3) 02 Nos. of 3.15 MVA Power Transformer, 03 Nos. of 33 KV VCB , 8 Nos. 11 KV VCBs, 02 Nos. of Transformer(11/0.4KV) for s/s and 53 Nos. of Distribution Transformer(11/0.4KV) shall be supplied by Nigam as free issue item. Total in Figures 71114367.53 74214536.24 INR Seven Crore Forty Two Lakh Fourteen Thousand Five Hundred & Thirty Six and Paise Twenty Four Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
| 83 | A. 33KV New line in KM (17.00 KM SINGLE CIRCUIT O/H) |
| 84 | Conducting route survey as per approved route map and pegging of route with tee off point section point & double pole locations. |
| 85 | Trimming of tree branches/plants manually/ by machine and preparing route approchases for proposed line/line maintenance work of existing HT/LT lines. |
| 86 | (2.3) Excavation of pit in ordinary rock ( Where blasting is not required) to erect various supports and stay sets including stacking of excavated muck from the edge of excavation/pit. |
| 87 | 9 Mtr PCC Pole/ 1.2mx0.6mx1.50 m deep |
| 88 | 36 feet long Lattice tower of size 1.5mx1.5m x1.8 m deep |
| 89 | Stay set 8'x 3/4\\" stay sets of size 0.75x0.5x1.6 m deep |
| 90 | (5.1) Erection of all type of steel supports in the excavated pit in alignment after checking the same with plumb line including fixing of cross arms and top hamper before erecting the supports. The support should be grouted and muffed in cement concrete of ratio 1:3:6 as per item No. 5.7 the remaining portion of the pit will be back filled with soil. The cost muffing and grouting will be paid extra. |
| 91 | Lattice Structure |
| 92 | (5.2) Erection of PCC poles in excavated pit with fixing of brackets,cross arms & top hampers as required in alignment after checking the same with plumb line. The support is to be back filled with soil with proper ramming. |
| 93 | (B) IN RURAL AREA |
| 94 | PCC Poles 9 Mtr. Long (400 Kg) |
| 95 | (5.4) Erection & fixing of G.I.Stay sets with anchor plates in excavated pit in required position and back filling with soil with proper ramming.The work includes fixing of stay clamps.Stay insulator with stay wire at both ends with proper tension.Size of stay set/stay wire |
| 96 | 8\\"x3/4\\" with 7/8 SWG stay wire |
| 97 | Providing and laying of cement concrete in ratio 1:3:6 using 43 grade cement,river sand and 12 mm to 20 mm graded blast crusher broken in pit/foundation according to the size/type of supports/stay set including compaction/curing for 21days in steel plates shuttering /farmer base. |
| 98 | Fixing of all type of fabricated material on erected supports with nut & bolts as per approved design & drawing of sub-station. |
| 99 | Fixing of 11kv B&S/T&C type disc insulator for 33kv lines (each unit consiting of 3 nos .disc.& 1set of H/W) on terminal point including fixing of hardware and strips. |
| 100 | Fixing of 33kv pin insulator with pins. |
| 101 | (6.16)Assembly. Installation & commissioning of gang operated isolating switch on erected structure with setting for accurate operation including fixing of allied accessories completein all respect with post insulator and jumpering on both ends for connection with the system. |
| 102 | (B)G.O. switch . without earthing blade. |
| 103 | 33kv G.O.switch |
| 104 | Fixing of danger plates on supports/structure |
| 105 | (7.1) Laying ,jointing , stringing, tensioning and clamping of conductor with proper sag as directed , using bolted type hardware including binding on pin insulators,jumpering on section points with binding wire / P.G.clamps.Aluminium jointing sleeves will be used for jointing the conductor.The line must stand at proper voltage on charging. |
| 106 | (B) In RURAL AREA |
| 107 | ACSR DOG Conductor in RURAL Area |
| 108 | (7.2) Laying , jointing,stringing,tensioning and clamping of G.I.Earthwire continuosly on single/double pole by using earth clamps /nuts & bolts with washers and earth reel etc.including proper binding at each end.The nuts and bolts will be supplied by the contractor for which payment will be made as per prevailing Discom store issue rates. |
| 109 | (B) In RURAL AREA |
| 110 | G.I.Earth wire 6 SWG |
| 111 | Earthing of line for all type of supports as per REC construction standards using Stay wire/GI wire with one pcs.of M.S.rod 20mm dia each 3 meter long and driving into earth by mechanical means as per approved design.Drawing &specification.All material except MS rod,MS flat & stay wirewill be supplied by the contractor.If material is supplied by the contractor ,the payment will be made as per prevailing Discom store issue rates.(In case of PCC poles earthing must be connected with earthwire already available on PCC pole at bottom) |
| 112 | (12.1) Painting with priming coats or ready mixed red-oxide paint 2 coats of approved make on steel works after cleaning with wire brush / sand paper.(including cost of red oxide) |
| 113 | On new surface |
| 114 | (12.2) Painting with aluminium paint of approved brand and manufacturer to give an even surface.(including cost aluminium paint) |
| 115 | On new works with two coats. |
| 116 | (14.2) Fabrication of other steel items/ structures of M.S angle ,M.S.channel & M.S.Flat including cutting ,drilling and continunous welding joint as per design and drawing.Other steel items |
| 117 | (15.23) Fixing of extension pieces/ brackets for raising of pole height including fixing of pin insulators with pins & rebinding etc. |
| 118 | 33 KV line |
| 119 | B. 33/11KV Substation(02 Nos.) |
| 120 | Levelling of ground up to 30 cm.depth. with tractor and T&P required as per condition of ground including removal of rubbish plants from ground & marking of boundary with lime powder.(Including all lead & lifting) |
| 121 | (2.3) Excavation of pit in ordinary rock ( Where blasting is not required) to erect various supports and stay sets including stacking of excavated muck from the edge of excavation/pit. |
| 122 | 9 Mtr PCC Pole/ 1.2mx0.6mx1.50 m deep |
| 123 | (2.5)Earth work excavation and foundation of platfrom of transformers (Size 3x3x1 cum) and breakers (Size 3.5x2x1cum) including dressing of sides and ramming of bottoms .Liftup to 1.5 Meter including taking out the excavated soil and depositing and refilling of jhiri, watering and ramming and disposal of surplus excavated soil as directed with in a lead of 50 Meter. |
| 124 | Hard / dense soil |
| 125 | Providing and laying cement concrete including compaction etc, complete using stone aggregate 40 mm nominal size (hand broken ) in foundation plinth excluding the cost of shuttering using 1 cement:5 sand:10 aggregate mix. Calculation: (T/F(2.4x2.4x0.9)+ Kiosk(3x1.5x0.9)) Note: 1. The rates are all lead of cement,lime,ballast, sand,surkhi and grit etc.at site of work 2. For all concrete work coarse sand shall be used no extra will be paid 3. Concrete mix prepared by power driven mechanical mixer shall be used 4. Under exceptional coditions, where mechanical mixer and vibrator are not used(with the approval of Engineer Incharge reduced by 3% for mechanical mixer and 2% for Vibrator 5. Thickness of the cement concrete should not exceeed 100 mm. |
| 126 | Plaster on new surface on walls in cement, sand mortar 1:6 including racking of joint etc. complete fine finsh 25 mm thick.Calculation: ( T/F (2.4x1.4x4)+(2.4x2.4) Kiosk-(3x0.6x4)+(3x1.5)) Note:1. The rates for complete work including racking of joints,curing,grinding,mixing and finishing T&P and scaffolding material and cost of material with all lead and lift.2. The rates cover protection of all place and things,requiring protection and cleaing such places and thing of all droppings and splashes of mortar etc. |
| 127 | (2.8)Cement concrete flooring grade 1:2:4 (1-cement :2- coarse sand :4-graded stone aggregate ) rounding off edges etc.but excluding cost of nosing of steps etc. complete |
| 128 | 25 mm thick with 12.5 mm thick nominal size aggregate. |
| 129 | 75 mm thick with 20 mm thick nominal size aggregate. |
| 130 | (2.11) Masonry for foundation and plinthCalculation: (T/F(2.4x2.4x1.1)+ Kiosk(3x1.5x0.6)) |
| 131 | Randon Rubble stone masonry for foundation and plinth in cement sand mortar 1:6(1 Cement : 6 Sand) including labour charges. |
| 132 | (4.3.1) Safe unloading of power/ distribution transformer. |
| 133 | (A) 33/11 KV power transformer. |
| 134 | Above 1.6 MVA & upto 3.15 MVA |
| 135 | Providing and laying of cement concrete in ratio 1:3:6 using 43 grade cement,river sand and 12 mm to 20 mm graded blast crusher broken in pit/foundation according to the size/type of supports/stay set including compaction/curing for 21days in steel plates shuttering /farmer base. |
| 136 | Fixing of all type of fabricated material on erected supports with nut & bolts as per approved design & drawing of sub-station. |
| 137 | Fixing of 11kv B&S/T&C type disc insulator for 33kv lines (each unit consiting of 3 nos .disc.& 1set of H/W) on terminal point including fixing of hardware and strips. |
| 138 | Fixing of 11kv B&S/T&C type disc insulator for 33kv lines (each unit consiting of 2 nos .disc.& 1set of H/W) on terminal point including fixing of hardware and strips. |
| 139 | Fixing of 33KV Pin Insulator with pins. |
| 140 | (6.16)Assembly. Installation & commissioning of gang operated isolating switch on erected structure with setting for accurate operation including fixing of allied accessories completein all respect with post insulator and jumpering on both ends for connection with the system. |
| 141 | (B)G.O. switch . without earthing blade. |
| 142 | 33kv G.O.switch |
| 143 | 11kv G.O.switch |
| 144 | (6.17)Assembly and installation of Horn Gap fuse set (set of 3nos)on erected structure as per design, complete in all respectwith post insulator including jumpering on both ends for connection with the system. |
| 145 | 33kv Horn Gap fuse set. |
| 146 | 11kv Horn Gap fuse set. |
| 147 | (6.19)Installation of lightening arrestors on erected structure /support (1 nos) including connection with earth by wire /strip as required and jumpering etc. |
| 148 | (A)sub-station type |
| 149 | 33 KV L.A.(each) |
| 150 | 11 KV L.A. .(each) |
| 151 | (6.20) Installation testing as per Nigams norm & commissioning of 11/.4 KV distribution transformer on erected supports including fixing of base channels as per requirment jumpering on HV&LV side, crimping of lugs/ clamping earth connections of body and neutral of transformer with wire /strip (as already provided with earthing ) complete in all respect. |
| 152 | 25 and 40 KVA |
| 153 | Installation of LT MCB (Distribution Box) on sub -station structure .The nuts & bolts will be supplied by the contractor for which payment will be made as per prevailing Discom store issue rates,including connection on both ends with suitable lugs duly crimped (lugs & cable will be supplied by Nigam) |
| 154 | Fixing of danger plates on supports/structure |
| 155 | Fixing of PG clamp of Dog Conductor |
| 156 | Earthing of line for all type of supports as per REC construction standards using Stay wire/GI wire with one pcs.of M.S.rod 20mm dia each 3 meter long and driving into earth by mechanical means as per approved design.Drawing &specification.All material except MS rod,MS flat & stay wirewill be supplied by the contractor.If material is supplied by the contractor ,the payment will be made as per prevailing Discom store issue rates.(In case of PCC poles earthing must be connected with earthwire already available on PCC pole at bottom) |
| 157 | Three nos. Earthing of each 11/0.4 KV distribution transformer /sub-station with M.S.Rod 20mm dia 3 meter long and driving them into earth by mechanical means at a distance as per approved design & drawing & specification.The work includes flattening of top ends of M.S.rod drilling a hole of 9/16\\" dia.at flattened top and tightening of M.S.flat 50x6mm/25x3mm/(having 3 hole 2ends and 1mm middle) with nuts and bolts with M.S.rods top end hole.The flat will also be welded with M.S.rod.The end will be connected to equipments as under in sequence. |
| 158 | (8.3)Mesh earthing for 33/11 kv sub-station as per approved map & design usingMS flat 50X6mm/MS road 20mm dia including laying of flat/rod at the depth of 0.65 Mtrs., welding & jointing at joints , structures & equipments etc.asunder: |
| 159 | (8.3.1) Excavation of trench of 0.65Mtrs.depth and 0.5Mtr.width |
| 160 | Ordinary rock ( Where blasting is not required ) |
| 161 | Laying of MS flat /MS rod in 0.65 Mtr.deep excavated trench and welding of MS flat/rod continuosly with 100 mm overlaping for straight joint including coating of MS flat joints with molten bitumen and covering joint with bitumen impregnated tape to protect from rust. |
| 162 | Shaping of MS flat for connecting the equipments with earthmesh .The work includes the welding of MS flat with equipments/structure and also with earth mesh.The work also includes coating of MS flat joint with molten bitumen and covering jointwith bitumen impregnated tape to protect from rust. |
| 163 | Where drilling is not required |
| 164 | (8.3.4) Preparation of spikes made of M.S Rod of 20 mm dia and 3 Mtr.length as per design and requirment to be driven in earth by mechanical means and Providing & .fastening of suitable clampswith the M.S. Rod, connection of earth wire/stay wire/MS flat in clamp depending on type of soil: |
| 165 | Filling of trench with available excavated muck in layers of 20cm (Max.)consolidating each deposited layer by ramming & watering with lead up to 50 Mtr, and lift up to 1.5 Mtr. |
| 166 | Painting of exposed portion of MS flat/rod with two coats of red-oxide primer and two coats of green enamel paint.including material. |
| 167 | Earthing of new 33/11 KV S/S with bentonite compound (including material ) involving following activities. |
| 168 | Pipe Earthing for Power Transformer at 33 / 11 KV S/S:- Supply & erection of earthing electrode shall consist of G.I. Pipe 100 mm,of 3 Mtr Length. The electrode shall be buried as far as practicable 3 meters below ground level. Wherever possible, earth electrodes shall be located as near the water tap, water drain or near down take pipe. Earth electrodes shall not be installed in proximity to a metal fence. It shall be kept clear of the buildings foundations and in no case it shall be nearer than 2 meters from the outer face of the wall. The electrode shall be surrounded with layer of charcoal dust and salt mixture through out the length. The 100 mm GI pipe shall be provided with holes of 12 mm dia. drilled at 75 mm interval upto 2.5 meters length from bottom. The top of the pipe shall be provided with a G.I. threaded cap for watering the earth through a pipe. A Clamp with Pati of 12\\" of M.S. Flat of size 50X6 mm shall be fixed (Bolted) on the top edge of the pipe which in turn shall be connected to Neutral / Body of the Power Transformer through M.S. Flat size 50X6 mm. The G.I. cap over the GI pipe shall be housed in a masonry chamber, approximately 300 mm x 300 mm x 300 mm deep. The masonry chamber shall be provided with a RCC inspection cover resting over a RCC frame, embedded in masonry. |
| 169 | (10.2) Erection of PCC poles in excavated pit in alignment after checking the same with plumb line as per approved design & drawing of 33/11kv sub-station.The pit should be back filled with the soil with proper ramming below 30cm ground level and then muffed above 15cm average ground level with cement concrete ratio1:3:6.The charges for muffing will be paid extra as per chapter no 5.6. |
| 170 | (B) IN RURAL AREA |
| 171 | PCC Poles 9 Mtr. Long |
| 172 | (10.3) Laying / stringing of bus bar with ACSR Dog & jumper connection using tie rod ,33KV /11KV insulator strings,required hardware,P.G.clamps/T clamps etc.as per requirement including Y-connections at bus bar jumpering point as per the direction of engineer in-charge. |
| 173 | ACSR DOG/RABBIT |
| 174 | (11.1) Erection of OCB/Kiosk/VCB complete with accessories including use of special tools & conducting all pre-commissioning test before energization,filling oil etc. complete in all respect with erection & grouting of structure (excluding civil works). The relays will be tested by Discom. |
| 175 | 33 KV OCB/ SF-6 Breaker |
| 176 | (11.1) Erection of OCB/Kiosk/VCB complete with accessories including use of special tools & conducting all pre-commissioning test before energization,filling oil etc. complete in all respect with erection & grouting of structure (excluding civil works). The relays will be tested by Discom. |
| 177 | 11 KV VCB (Outdoor ) |
| 178 | (12.1) Painting with priming coats or ready mixed red-oxide paint 2 coats of approved make on steel works after cleaning with wire brush / sand paper.(including cost of red oxide) |
| 179 | On new surface |
| 180 | (12.2) Painting with aluminium paint of approved brand and manufacturer to give an even surface.(including cost aluminium paint) |
| 181 | On new works with two coats. |
| 182 | (14.2) Fabrication of steel structures of M.S angle ,M.S.channel & M.S.Flat including cutting ,drilling and continunous welding joint as per design and drawing. |
| 183 | Other steel items |
| 184 | C. 11 KV interconnection Total 110.65 km on ACSR RABBIT Conductor |
| 185 | Conducting route survey as per approved route map and pegging of route with tee off point section point & double pole locations. |
| 186 | Trimming of tree branches/plants manually/ by machine and preparing route approchases for proposed line/line maintenance work of existing HT/LT lines. |
| 187 | (2.0) Excavation of pit in soil (ordinary) to erect various supports and stay sets including stacking of excavated soil from the edge of excavation.(15 % extra shall be payble for the designated desert area panchayat samities of Jodhpur Discom in pursuance to JdVVNL order No. 1240 dt. 18.07.13) |
| 188 | (A) Height of poles/R.S.Joist/M.S. Rail /Size of pit |
| 189 | (2.2) Excavation of pit in Hard Soil |
| 190 | 9 Mtr/ 1.2mx0.6mx1.50 m deep |
| 191 | Excavation of pit in Hard Soil |
| 192 | (B) Lattice Tower /Size of pit |
| 193 | 11.4/10.8 Mtr/ 1.5mx1.5m x1.80 m deep |
| 194 | (C) Stay set/Depth of pit |
| 195 | 6'x 5/8\\" -0.75x0.5x1.35 m |
| 196 | (2.3) Excavation of pit in ordinary rock ( Where blasting is not required) to erect various supports and stay sets including stacking of excavated muck from the edge of excavation/pit. |
| 197 | (A) Height of poles/R.S.Joist/M.S. Rail /Size of pit |
| 198 | 9 Mtr PCC Pole/ 1.2mx0.6mx1.50 m deep |
| 199 | (B) Lattice Tower /Size of pit |
| 200 | 11.4/10.8 Mtr/ 1.5mx1.5m x1.80 m deep |
| 201 | (C) Stay set/Depth of pit |
| 202 | Stay set 6'x 5/8\\" stay sets of size 0.75x0.5x1.35 m deep |
| 203 | (2.4) Excavation of pit in hard rock ( Where blasting/drilling is required) to erect various supports and stay sets including stacking of excavated muck from the edge of excavation/pit. |
| 204 | (A) Height of poles/R.S. Joist/M.S. Rail Size of pit |
| 205 | 9 Mtr PCC Pole/ 1.2mx0.6mx1.50 m deep |
| 206 | (B) Lattice Tower /Size of pit |
| 207 | 11.4/10.8 Mtr/ 1.5mx1.5m x1.80 m deep |
| 208 | (C) Stay set/Depth of pit |
| 209 | 6'x 5/8\\" -0.75x0.5x1.35 m |
| 210 | (5.1) Erection of all type of steel supports in the excavated pit in alignment after checking the same with plumb line including fixing of cross arms and top hamper before erecting the supports. The support should be grouted and muffed in cement concrete of ratio 1:3:6 as per item No. 5.7 the remaining portion of the pit will be back filled with soil. The cost muffing and grouting will be paid extra. |
| 211 | Lattice Structure |
| 212 | (5.2) Erection of PCC poles in excavated pit with fixing of brackets,cross arms & top hampers as required in alignment after checking the same with plumb line. The support is to be back filled with soil with proper ramming. |
| 213 | (B) IN RURAL AREA |
| 214 | PCC Poles 9 Mtr. Long (200 Kg) |
| 215 | (5.3) Erection &assembly of 2 Pole structures of steel supports or PCC poles in excavated pit in alignment after checking the same with plumb line.Including fixing of complete steel structure for line D.P.The support is to be back filled with soil with proper ramming. |
| 216 | PCC Poles 9 Mtr. Long(200 Kg.) |
| 217 | (5.4) Erection & fixing of G.I.Stay sets with anchor plates in excavated pit in required position and back filling with soil with proper ramming.The work includes fixing of stay clamps.Stay insulator with stay wire at both ends with proper tension.Size of stay set/stay wire |
| 218 | 6\\"x5/8\\" with 7/10 SWG stay wire |
| 219 | Providing and laying of cement concrete in ratio 1:3:6 using 43 grade cement,river sand and 12 mm to 20 mm graded blast crusher broken in pit/foundation according to the size/type of supports/stay set including compaction/curing for 21days in steel plates shuttering /farmer base. |
| 220 | Fixing of all type of fabricated material on erected supports with nut & bolts as per approved design & drawing of sub-station. |
| 221 | (6.8) Fixing and assembly of disc.point channel pair with pilot plates top hampers & clamps on erected single pole structure as per design. |
| 222 | 11 KV Line |
| 223 | Fixing of 11kv B&S/T&C type disc insulator of 11kv lines (each unit consiting of 1nos.disc.& 1set of H/ W ) on terminal point including fixing of hardware and strips. |
| 224 | Fixing of 11 KV pin insulators with pins. (as per latest specification and drawings adopted & approved by the NIGAM) |
| 225 | Fixing of danger plates on supports/structure |
| 226 | (7.1) Laying, jointing, stringing, tensioning and clamping of conductor with proper sag as directed , using bolted type hardware including binding on pin insulators,jumpering on section points with binding wire / P.G.clamps.Aluminium jointing sleeves will be used for jointing the conductor.The line must stand at proper voltage on charging. |
| 227 | (B) IN RURAL AREA |
| 228 | ACSR RABBIT |
| 229 | (7.2) Laying , jointing,stringing,tensioning and clamping of G.I.Earthwire continuosly on single/double pole by using earth clamps /nuts & bolts with washers and earth reel etc.including proper binding at each end.The nuts and bolts will be supplied by the contractor for which payment will be made as per prevailing Discom store issue rates. |
| 230 | (B) In RURAL AREA |
| 231 | G.I.Earth wire 8 SWG |
| 232 | (8.2) Three nos. Earthing of each 11/0.4 KV distribution transformer /sub-station with M.S.Rod 20mm dia 3 meter long and driving them into earth by mechanical means at a distance as per approved design & drawing & specification.The work includes flattening of top ends of M.S.rod drilling a hole of 9/16\\" dia.at flattened top and tightening of M.S.flat 50x6mm/25x3mm/(having 3 hole 2ends and 1mm middle) with nuts and bolts with M.S.rods top end hole.The flat will also be welded with M.S.rod.The end will be connected to equipments as under in sequence. |
| 233 | (15.23) Fixing of extension pieces/ brackets for raising of pole height including fixing of pin insulators with pins & rebinding etc. |
| 234 | 11 KV line |
| 235 | D. Supply of new 53 nos. of 11/0.4 KV S/S |
| 236 | (2.2) Excavation of pit in Hard Soil |
| 237 | (A) Height of poles/R.S.Joist/M.S. Rail Size of pit |
| 238 | 9 Mtr/ 1.2mx0.6mx1.50 m deep |
| 239 | (C)Stay set/Depth of pit |
| 240 | 6'x 5/8\\" -0.75x0.5x1.35 m |
| 241 | (2.3) Excavation of pit in ordinary rock which does not required blasting/murrad (in Jodhpur Discom) to erect various supports snd stay sets including stacking of exacavated muck from the edge of excavation/pit. |
| 242 | (A) Height of poles/R.S.Joist/M.S. Rail Size of pit |
| 243 | 9 Mtr/ 1.2mx0.6mx1.50 m deep |
| 244 | (C)Stay set/Depth of pit |
| 245 | 6'x 5/8\\" -0.75x0.5x1.35 m |
| 246 | (2.4) Excavation of pit in Hard rock ( Where blasting/ drilling is required) to erect various supports and stay sets including stacking of excavated muck from the edge of excavation/pit. |
| 247 | (A) Height of poles/R.S.Joist/M.S. Rail Size of pit |
| 248 | 9 Mtr/ 1.2mx0.6mx1.50 m deep |
| 249 | (C)Stay set/Depth of pit |
| 250 | 6'x 5/8\\" -0.75x0.5x1.35 m |
| 251 | (5.3) Erection & assembly of 2 Pole structures of steel supports or PCC poles in excavated pit in alignment after checking the same with plumb line. Including fixing of complete steel structure for line D.P.The support is to be back filled with soil with proper ramming.The nuts & bolts are to be provided by the contractor as per Nigams specfication for which the payment will be made at the prevailing Discom store issue rates. |
| 252 | PCC Poles 9 Mtr. Long(200 Kg.) |
| 253 | (5.4) Erection & fixing of G.I.Stay sets with anchor plates in excavated pit in required position and back filling with soil with proper ramming.The work includes fixing of stay clamps.Stay insulator with stay wire at both ends with proper tension.Size of stay set/stay wire |
| 254 | 6\\"x5/8\\" with 7/10 SWG stay wire |
| 255 | Fixing of 11kv B&S/T&C type disc insulator of 11kv lines (each unit consiting of 1nos.disc.& 1set of H/ W ) on terminal point including fixing of hardware and strips. |
| 256 | (6.16) Assembly. Installation & commissioning of gang operated isolating switch on erected structure with setting for accurate operation including fixing of allied accessories completein all respect with post insulator and jumpering on both ends for connection with the system. The nuts and bolts will be supplied by the contractor for which payment will be made as per prevailing Discom store issue rates. |
| 257 | (B)G.O. switch . without earthing blade. |
| 258 | (B) 11kv G.O.switch without Earthing Blade |
| 259 | (6.17) Assembly and installation of Horn Gap fuse set (set of 3nos)on erected structure as per design, complete in all respectwith post insulator including jumpering on both ends for connection with the system. The nuts & bolts will be supplied by the contractor for which payment will be made as per prevailing Discom store issue rates. |
| 260 | 11kv Horn Gap fuse set. |
| 261 | (6.20) Installation testing as per Nigams norm & commissioning of 11/0.4KV distribution transformer on erected supports including fixing of steel structure set for sub-station as per requirment jumpering on HV&LV side, crimping of lugs/ clamping earth connections of body and neutral of transformer with wire /strip (as already provided with earthing ) complete in all respect. The PG clamps nuts & bolts will be supplied by the contractor for which payment will be made as per prevailing Discom store issue rates, |
| 262 | Above 40 KVA & up to 100 KVA |
| 263 | Three nos. Earthing of each 11/0.4 KV distribution transformer /sub-station with M.S.Rod 20mm dia 3 meter long and driving them into earth by mechanical means at a distance as per approved design & drawing & specification.The work includes flattening of top ends of M.S.rod drilling a hole of 9/16\\" dia.at flattened top and tightening of M.S.flat 50x6mm/25x3mm/(having 3 hole 2ends and 1mm middle) with nuts and bolts with M.S.rods top end hole.The flat will also be welded with M.S.rod.The end will be connected to equipments as under in sequence. |
| 264 | Note-1.GST shall be paid only on production of GST Invoices. INR Tender Inviting Authority: Superintending Engineer(TW), Jodhpur Discom, Jodhpur Name of Work: “Supply, erection, testing and commissioning of material/equipment for 17.00 Km Single circuit O/H 33 KV line with ACSR Dog Conductor T-off from 33 KV NEWA feeder, 02 nos new 33 /11 KV Sub-station IGNP-II and IGNP-III,110.65 km single circuit O/H 11 KV line with ACSR Rabbit conductor and 53 Nos. new 11/0.4 KV sub-stations on turnkey basis in Bap area as applied by XEN IGNP, Division-24 Phalodi”, under AEN(O&M) Bap, Phalodi Circle, Jodhpur Discom, Jodhpur, against deposit Work. Contract No: TNTW-789 Name of the Bidder/ Bidding Firm / Company : ABSTRACT OF PRICE SCHEDULE FOR SUPPLY OF MATERIAL & EQUIPMENT(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name only ) |
| 265 | Description |
| 266 | Quoted Rate in BoQ-1 SUPPLY OF MATERIAL & EQUIPMENT |
| 267 | Quoted Rate in BoQ-2 ERECTION OF MATERIAL & EQUIPMENT Quoted Rate in Figures 0.0 Quoted Rate in Words INR Zero Only + |
