|
| 1 | Clearing grass and removal of rubbish up to a distanceof 50 metres outside the periphery of the area |
| 2 | Cutting down trees including trunks and branches withgirths above 30cm to 60cm and stacking the materialsneatly with all lifts and lead of 1000m as directed andearth filling in the depression/ pit if any. |
| 3 | Cutting down trees including trunks and branches withgirths above 60cm to 90cm and stacking the materialsneatly with all lifts and lead of 1000m. as directed andearth filling in the depression/pit if any. |
| 4 | Removal of plants / ficus grown by pulling out rootsystem embedded in masnory,cutting stem andapplication of high/gur/lime formulation as specified bythe Architect or other patented chemical biocidetreatment such as biocide 'Glycel'(iso proplamine saltof glyphosate) or other chemical as specified by theEngineer incharge etc. complete. |
| 5 | Excavation for foundation in earth, soil of all types,sand, gravel and soft murum, including removing theexcavated material up to a distance of 50 m. beyondthe building area and stacking and spreading asdirected, dewatering, preparing the bed for thefoundation and necessary back filling, ramming,watering including shoring and strutting etc. complete.(Lift upto 0.00 to 1.50 m.) By Manual Means |
| 6 | Excavation for foundation in hard murum includingremoving the excavated material upto distance of 50metres beyond the building area and stacking andspreading as directed, dewatering, preparing the bedfor the foundation and necessary back filling, ramming,watering including shoring and strutting etc. complete.(Lift upto 1.50m) By Manual Means |
| 7 | Providing soling using 80 mm size trap metal in 15 cm.layer including filling voids with Crushed sand/grit,ramming, watering etc. comple |
| 8 | Providing and laying Cast in situ/Ready Mix cementconcrete in M15 of trap/ granite/quartzite/gneiss metalfor foundation and bedding / steps including steelcentering, formwork, laying/pumping, compacting,roughening them if special finish is to be provided,finishing uneven and honeycombed surface and curingetc. complete. The Cement Mortar 1:3 plaster isconsidered for rendering uneven and honeycombedsurface, only. Newly laid concrete shall be covered bygunny bag, plastic, tarpaulin etc. (Wooden centeringwill not be allowed.), with fully automatic microprocessor based PLC with SCADA enabled reversibleDrum Type mixer/concrete Batch mix plant (Pan mixer)etc. complete. With fine aggregate (Crushed sand VSIGrade) |
| 9 | Providing Uncoursed rubble masonry of trap / granite /quartzite / gneiss stones in cement mortar 1:6 infoundation and plinth of inner walls / in plinth ofexternal walls including bailing out water manuallystriking joints on un exposed faces and wateringetc.complete. |
| 10 | Providing coursed rubble masonry first sort of trap /granite / quartzite / gneiss stones in cement mortar 1:6in superstructure including racking out joints on theinside when plastering is to be done, watering andscaffolding etc. complete. |
| 11 | Providing and fixing Stone Paving, Second Sort inCement mortar 1:1½, with size of stone (60 cm. x 45cm. x 15 cm.), as per detailed specifications anddrawings or as directed including all stone slabs to ofapproved quality, hard, even, sound, durable anduniform thickness, the stones to be not finely chiseldressed on the surface and the course to be ofprescribed width, true for top 25 mm. (1\\"), the jointsrunning true, the stones to be laid with joints notexceeding 8 mm. (5/16\\") thick and to be evenly andfirmly bedded flush in mortar on the concrete and nohollow left, side to be dressed true and as per shape atleast half the depth from the face, preparing the limemortar in lime miller, watering and all paving workwhen handed over to be perfectly clean and free fromall mortar stains etc. complete. |
| 12 | Providing and fixing frame with/without ventilator ofsize as specified with Country non teak wood for doorsand windows including chamfering, rounding, rebating,ironhold fast of size 300mm x 40mm x 5mm with oilpainting, etc. complete. |
| 13 | Providing and fixing single or double leaf panel leddoor shutter excluding frame with glazed openable fanlight shutter 35mm thick as per detailed drawingconsisting panelled verticals styles 100mmx35mm andlock and bottom rail 200mmx35mm and panels 12 mmthick both side commercial ply faced particle boardincluding stainless steel fixtures and fastening andT.W.beading at junctions of panel in ser tsandasinstructed by the Engineer in charge including 3coatsof oil paintina etc. complete |
| 14 | Providing and fixing in position Guard Railing as perDrg. No. 15 Type C dt. 20-4-79,with 3 rows of 40mmdia. G.I. pipe 30cm a part and fixed in M.S. channels ofsection 100 x 50 x 6 mm spaced 2.5 C/c 1:2:4 с.с.bedding of size 45 x 30 x 30cm. as per detaileddrawing, with 3 coats of approved of yellow and blackpaint including necessary excavation in any strata. |
| 15 | Providing and fixing mild steel grill gate with angle ironframe 65mmx65mmx10mm with iron barsat 150mmC/C and diagonal flats as per the detailed drawingincluding hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt. |
| 16 | Providing and laying Cast in situ/Ready Mix cementconcrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamferedas per drawing oras directed including steel centering.plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. TheCement Mortar 1:3 plaster is considered for renderinguneven and honeycombed surface only. Newly laidconcrete shall be covered by gunny bag, plastic.tarpaulin etc. (Wooden centering willnot be allowed.)With fine aggregate (Crushed sand VSI Grade) |
| 17 | Providing and fixing Stone benches of size1.80x0.75m with two leg support of thickness 75mm,M20 Conerete-with silu finish with backrest to beplaced above the platform edjes lines/periphary etc.Complete in all respects as per the Design &Instructions of the Engineer Incharge including alltaxes, transportation charges, loading, unloadning etc,complete. Basic Rate (as per market rate) |
| 18 | Providing and fixing N.H./ S.H. Route Marker size 60cm x 45 cm with one Number direction plate of size 30cm x 25 cm prepared on 16 gauge M.S. sheet includingpainting with one coat of zinc cromate stoving primerand two coats each of white and green back groundand back side gray stove enamelled, bonded with cutout of red Retro reflective sheet Engineering grade,border / letters / numerals and arrow, coated with nonpealable crystal clear protective transparent coatretaining 100% reflection including one number of M.S.Angle iron post of size 50 x 50 x 5 mm of 3.65 m. longinflated at bottom drilled on top in one piece withoutjoint painted with white and black bands of 30 cm.fixing board and post with 4 Nos. of high strength G.I.bolts and nuts of size 10 mm dia. and 20 mm longincluding all taxes,conveying, fixing in ground withcement concrete 1:4:8 block of 60 cm x 60 cm x 75 cmsize as directed by Engineer-in-charge etc. complete.Mild Steel Route Marker with Engineering Grade Please Enable Macros to View BoQ information |
