|
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering Including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Manual Means BDA 1 21.02 Bd.A.1 Page No. 259 (SSR No.: 21.02) |
| 2 | Excavation for foundation in hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m) By Manual Means BDA 2 21.07 Bd.A.2 Page No. 259 (SSR No.: 21.07) |
| 3 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. BDA 21.40 - As directed by Engineer in charge. (SSR No.: 21.4) |
| 4 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/quartzit/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand BDE 1 24.01 Bd. E. 1 Page No. 287 (SSR No.: 24.01) |
| 5 | Providing and fixing in position TMT FE 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. BDF 16 26.33 - Bd. F. 16 Page No. 306/I.S. 456 (2004 (SSR No.: 26.33) |
| 6 | Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand BDF 3 25.10 -(SSR No.: 25.11) |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in columnslike raft, strip foundations, grillage and footings of R.C.C. columns as per drg--etc BDF 3 25.14-(SSR No.: 25.31) |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand BDF 3 25.16 -(SSR No.: 25.50) |
| 9 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including. centering, formwork, cover blocks compacting curing, finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand BDF 9 26.05 Bd. F.9 Page No. 303 and B.7, Page No.38 (SSR No.: 26.05) |
| 10 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including. centering, formwork, cover blocks compacting curing, finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand BDF 9 26.05 Bd. F.9 Page No. 303 and B.7, Page No.38 (SSR No.: 26.05) |
| 11 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. BDF 27.01 41 26.116-(SSR No.: 27.01) |
| 12 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete BDG 4 27.05-0 (SSR No.: 27.05) |
| 13 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. BDL 3 32.11 Bd.L.3 Page No. 368 (SSR No.: 32.11) |
| 14 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. BDL 2A 32.04 - Bd. L.2 Page No. 368 (SSR No.: 32.04) |
| 15 | Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. BDL 32.14 Spec. No.: As directed by Engineer- in-charge. (SSR No.: 32.15) |
| 16 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. BDT 39.94-As directed by Engineer in charge. SSR No.: 40.01) |
| 17 | Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oll painting etc, complete) frame size 60 mm x 100 mm. BDT 39.56 As directed by Engineer in charge. (SSR No.: 39.56) |
| 18 | Providing and fixing in position. (as per I.S.1868 /1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 763.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box BDT 39.39 As directed by Engineer in charge. (SSR No.: 39.39) |
| 19 | Providing and applying one coat of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing surface (excluding primer coat) etc. complete. BDO 5 35.07 Bd.0.5 Page No. 405 (SSR No.: 35.07) |
| 20 | Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete BDT 39.58- As directed by Engineer in charge. (SSR No.: 39.58) |
| 21 | Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. BDM 33.67 Bd. M-12 page No. 385 SSR No.: 33.67) |
| 22 | Providing and applying one coat of seal cement primer of approved manufacture and shed Including scaffolding preparing the surface by cleaning dirt and other foreign matters, scrapping if necessary including scaffolding etc. complete. BDO 8E 35.21 As directed by Engineer in charge. (SSR No.: 35.21) |
| 23 | Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colour cement slurry cleaning curing etc. complete. BDM 12 33.25 Bd.M.12 Page No. 385. (SSR No.: 33.25) |
| 24 | Providing and applying Two coats of wall care Putty of 2mm thickness for plastered surface and 5-6mm thickness finished concrete surface to Ceiling and Walls to prepare surface even and smooth of Brands BIRLA WHITE, BERGER, BISION, J.K., make, etc complete. a) For plastered walls/ceiling 2mm BDL 32.34 -As directed by Engineer in charge. (SSR No.: 32.34 |
| 25 | Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm /kg with two coat using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. BDJ 31.09 - As directed by Engineer in charge. (SSR No.: 31.09) |
| 26 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters BDV 42.53- As directed by Engineer in charge. (SSR No.: 42.53) |
| 27 | Providing and fixing 15 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete. BDV 42.36 - As directed by Engineer in charge. (SSR No.: 42.37) |
| 28 | Providing and laying for 150 mm dia salt glazed stoneware pipe including fittings Such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete. BDV 39 42.04 Page No. 573 Bd.V.39, (SSR No.: 42.04) |
| 29 | Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite /Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete. Both side polish BDM 22 33.35 Bd. M.22 B/Page No. 390 (SSR No.: 33.35) |
| 30 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. BDA 11 21.37-Bd.A.11 Page No. 263 (SSR No.: 21.37) |
| 31 | Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. BDV 42.30 As directed by Engineer in charge. (SSR No.: 42.30) |
| 32 | Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75 kg with lid and frame fixed in cement concrete. BDV 43 42.11-Bd.V.43, Page No. 574 (SSR No.: 42.11) |
| 33 | Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. BDV 37 42.02- Bd.V.37, Page No. 571 (SSR No.: 42.02) |
| 34 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BDV 42.55- As directed by engineer-in-charge. (SSR No.: 42.55) |
| 35 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. BDP 5A 36.11 Bd.P.5 Page No. 413 (SSR No.: 36.12) |
| 36 | Providing and fixing white glazed earthenware sink 450mm x 200mm x 300mm including all connection of the G.I. supply and lead waste pipes up to the outside face of the wall, cold water chromium plated screw down bib tap, rolled steel or C.I. brackets, rubber plug with chain and stop tap complete. BDV 31 41.75 -Bd.V.31 Page No.566 (SSR No.: 41.76) |
| 37 | Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. BDV 41.39-(SSR No.: 41.40) |
| 38 | Providing, laying and fixing,jointing Supreme Eco- drain 110 mm SN 8 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete. Bd-V 43.29 -As Directected By Engineer Incharge (SSR No.: 43.30) |
| 39 | Providing and fixing 10 cm PVC nahani trap with grating etc. complete. BDV 5 42.67 BD.V 5 page 551 and as directed by Engineer in charge (SSR No.: 42.67) |
| 40 | Providing and fixing wall hung white wash basin of size 350x450x165mm with approved make pillar cock, C.P. Angular stop cock long thread approved make continental including SS bottle trap of (SSR No.: 48.32) |
| 41 | Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall without flushing cistern with flush cock and with water Jet and necessary fittings including cutting and making good to the walls and floors testing etc. complete. (prior approval of sample and brand by Ex. Engineer is necessary before use) BDV 21 43.19 Specfications (SSR No.: 43.19) |
| 42 | Providing and fixing C.P.Two way BIB cock jaquar make or equivalent continental (CAT.NΝΟ. CON-041) including necessary sockets/union nut etc. complete. BDV 42.79 As directed by Engineer in charge (SSR No.: 42.80) |
| 43 | Supplying and erecting PVC trunking (PVC casing-n-capping) of size 20 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.(1-2-6)\\" (SSR No.: 1-2-6) |
| 44 | Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit(1-2-2) SSR No.: 1-2-2) |
| 45 | Supplying and erecting decorative pre-wired box type fitting / batten suitable for 4 feet, T8 LED tube light (excluding tube light).(SSR No.: 2-1-1) |
| 46 | \\"Supplying and erecting PVC box trunking of size 50x50 mm. with accessories on wall/celling as per specification No: WG-MA/BOX(1-2-11)\\" (SSR No.: 1-2-11) |
| 47 | Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF(SSR No.: CSR 3-10-3) |
| 48 | Supplying, erecting and marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-10)(SSR No.:)REDUCE AS PER CAPACITY |
| 49 | Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW(1-7-26) (SSR No.: 1-7-25) |
| 50 | Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG- PW/HW (SSR No.: 1-7-3) |
| 51 | Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.(1-6-10) (SSR No.: |
| 52 | Supplying and erecting modular type switch 6A /10A duly erected on provided plate and box with wiring connections complete. (1-6-1) (SSR No.: 1-6-1) |
| 53 | \\"Supplying and erecting mains with 4x 4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-3)\\" (SSR No.: 1-3-3) |
| 54 | Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-2)\\" (SSR No.: 1-3-2) |
| 55 | Testing of concrete cubes for compressive strength...etc complete -(SSR No.: -) |
| 56 | Royalty for natural sand....etc complete Royalty for Stone, rubble, murum, soil etc co (SSR No.: -) |
| 57 | Royalty for Natural stone aggreagate..etc complete -(SSR No.: -) Please Enable Macros to View BoQ information |
