|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15cm thick (below or above ground level) complete all as specified and as directed. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed. |
| 3 | M & L non skid coloured ceramic tiles each tile area (square/rectangle) exc 0.06 Sqm but n.exc 0.11 Sqm tile thickness 7 to 8 mm, in floors etc. set and joined in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer with CM 1:6, 15 mm thick for laying floor finishes complete all as specified and as directed. |
| 4 | M & L glazed ceramic tiles coloured 350 x 250 x 7mm / 450 X 350 X 7mm thick on vertical surfaces such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile including 10mm thick in CM 1:4 as backing coat for fixing dado tiles complete all as specified and as directed. |
| 5 | M & L Roughening surfaces of old concrete floor by picking, sweeping clean & washing down with water to remove dust, etc., brushing neat cement slurry with 3.0kg of cement per sqm complete all as specified and as directed. |
| 6 | M & L non skid ceramic coloured tiles, area of each tile exc 0.18sqm and n.exc 0.38sqm (square/rectangle) 7 to 8mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick cement screed in CM 1:6 complete all as specified and as directed. |
| 7 | All as per item No.6 here in before, but on vertical surfaces including 10mm thick CM 1:4 as in backing coat of dado/skirting complete all as specified and as directed. |
| 8 | M & L chequered coloured cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment including 15mm thick cement screed bed in CM 1:6 |
| 9 | All as per item No.8 above but bull nosed as in treads inclusive of screed bed in C.M 1:4, 15mm thick complete all as specified and as directed. |
| 10 | All as per item No.8 above but on vertical surfaces inclusive of back coat in C.M 1:4, 10mm thick complete all as specified and as directed. |
| 11 | M & L PCC 1:3:6 75mm thick Type C-2 (using 40mm graded stone aggregate) as in plinth protection/hard standing finishing top surface even and smooth without using extra cement complete all as specified and as directed. |
| 12 | M & L for providing 100mm thick, PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floors and paving's etc. complete all as specified and as directed. |
| 13 | M & L Sand filling under floors or in foundations including wateringand consolidation complete all as specified and as directed. |
| 14 | M & L machine pressed Pre cast rubber finished coloured PCC interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade of cement concrete of with grey cement and pigment complete all as specified and as directed. |
| 15 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 16 | M & L mild steel work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-410-W(Gde-E-250) quality- B complete all as specified and as directed. |
| 17 | Dismantling of (corrugated, semi-corrugated, etc.) steel sheeting in roof coverings complete all as specified and as directed. |
| 18 | S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 19 | S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 20 | M & L preparing surfaces of new steel iron work exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 21 | Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 for concealed water tubing, etc.& making good, cutting n.exc 10 cm girth complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 22 | Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 for concealed water tubing, etc.& making good, cutting n.exc 10 cm girth complete all as specified and as directed. Please Enable Macros to View BoQ information |
