Name of Work:- Annual Plan-308/25-26-RECORD ROOM CONSTRUCTION AT PANCHAYATH OFFICE BUILDING-NAYARAMBALAM G.P-General Civil Work
Sl. No.
Item Description
1
office maintenance
2
OD418633/2025-2026:Steel work for purlin/single section with MS tubes including cutting ,hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc.complete(observed data as per 50.10.1)
3
OD418632/2025-2026::Providing and fixing Aluminium traford sheet pre coated (size,shape and pitch ofcorrugation as approved by Engineer - in - charge ) 0.46mm total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheetand polyster top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum toavoid scratches during transportation and should be supplied in single length up to 12 meters or as desiredby Engineer in charge . The sheet shall be fixed using self drilling/ self tapping screws of size (505*55 mm )with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape wherever required.
4
50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete
5
11.3.1:Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate
6
13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)
7
10.5.2:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
