|
| 1 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead :Of area of 3 sqm. and below |
| 3 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 4 | Providing and fixing of PVC panelling for walls and cellings complete job with all fixtures including electrict fittings |
| 5 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.).For fixed portion2 Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 6 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS:12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc.complete as per architectural drawings and directions of engineer-incharge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. |
| 7 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc.complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.)With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) |
| 8 | Providing and fixing of blind curtain(roller/vertical/venetian type as approved) of good quality fabric/material,complete with all acessories including brackets,channels,operating chain/cord,screws,fasteners and fittings,properly aligned and fixed in position as per direction of Engineer-in-charge |
| 9 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.In colour such as White, Ivory, Grey, Fume Red Brown |
| 10 | Providing and fixing 12mm thick specified board medium density exterior grade (Grade I)to frame, backing or studding with screws etc. complete (Frames, backing orstudding to be paid separately) :Flat pressed 3 layer particle board or graded wood particle boardIS:3087 |
| 11 | Providing and fixing office table,overall length 5feet,fabricated from premium quality materials.The table shall have a chequered-type toughened glass top (minimum thickness 6mm yto 8mm)fixed over a 36mm thick laminated board surface.The width of the table shall be 1500mm height of table 750mm.The pedestal shade shall be as per buyers choice,with width tolerance +10mm depth tolerance + 10mm and height tolerance +5 mm.The table shall be provided with one drawer unit and one side locker unit,complete with locking arrangements,handles and channels of approved make.The understructure shall be made of seasoned hardwood or MS frame as per design and properly finished with polish or power coating.(Market Price) |
| 12 | Providing and fixing of good quality curtain cloth with curtain pipes rods(MS/Steel/Aluminium/Brass)with brackets supports rings and necessary fitting including installation at site complete job(Market Price) |
| 13 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittingsand fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 14 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 15 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead. With cement mortar 1:4 (1 cement : 4 coarse sand) |
| 16 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 17 | Wiring for light point\fan [point\call bell point with 1.5 sq. mm. FRLS PVC insulated copper conductor singel core casbel in furface \recessed medum class pvc conduit with modular switch , modular plate, suitable G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper comnductor singel cabel etc as req. |
| 18 | Supply and fixing suiutable size of GI box with modular plate and cover in forent of surface or in recess,including providing and fixing 2 nos. 5/6 A modular socket outlet and 2 nos. 5/6 A modular swuitch, ,connection etc as rwq. (for light plug to be used in non residential buldings) |
| 19 | Supply and fixing suiutable size of GI box with modular plate and cover in forent of surface or in recess,including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular swuitch, ,connection etc as rwq. |
| 20 | Wiring for cicuit/ submain wirring alongwith earth wire with the following size of FRLS PVC insulated copper conductor 'singel core cabel in surfacr/ recessed medum class PVC conduit as req |
| 21 | 1X1.5 Sq mm |
| 22 | 2X2.5 Sq mm |
| 23 | 4X4.0 sq. Mm |
| 24 | Supply and fixing of follo following size medum class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed comduit as req.25 mm |
| 25 | Supply and fixing two module steped type electronic fan regulator on exisiting modular plate switch box including connection bu excluding modular plate etc as req. |
| 26 | Supply and fixing modular blanking plate on exisiting modular plate & switch box excluding modular plate as req. |
| 27 | Supply and fixing of following electrical items as req |
| 28 | 18 watt led pannel lights |
| 29 | Wall Fan |
| 30 | Led lamp 9/12 Watt |
| 31 | Celling fan 1200 mm swip alongwith rod upto 2'long as req. Please Enable Macros to View BoQ information |
