|
| 1 | Taking down chowkats or frame with shutters area n.exc 1.5 Sqm each (without taking off shutters from the frames) including cutting holes to facilitate the taking down etc complete all as directed. |
| 2 | S&F factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions. |
| 3 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle (02 Nos), tower bolts (02 Nos), sliding bolt (01 No), Hinges (03 Nos) made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 4 | S&F5mm thick figured glass, pinhead type, in squares n.exc 0.5 sqm each pane complete all as specified and directed. |
| 5 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 6 | S&F in repairs 10mm thick toughned glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required etc complete all as specified and directed.Note : Fitting /hinges required if any shall and paid seperately. |
| 7 | Dismantling of wall and ceiling boards including frame (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as directed. |
| 8 | S&F Gl frame work of grid size 605x605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with and including hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long etc complete all as specified |
| 9 | S&F 10mm PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing etc complete all as specified and as directed. |
| 10 | S&F 4mm thick WPC fluted exterior & interior louvers with and including aluminium section 25mmx25mmx1.2mm, aluminium angle cleat & screw locking etc. The WPC fluted panels are interlockable and louvers should be of size 2900mmx150mm x25mm. The cost includes aluminium framework and all necessary fixtures & fittings etc complete all as specifed and as directed by Engr-in-Charge. |
| 11 | Dismantling floor, hearth or wall tiling of any description, size and thickness including cement mortor bedding (but not backing), removing rubbish off the premises etc complete all as directed. |
| 12 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) light shade polished, size of each tiles 1200 x 600 mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed. |
| 13 | Dismantling plain or corrugated steel sheeting any gauge, thickness, in roof coverings etc complete all as specified. |
| 14 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, including cranking to shape as specified and fixed with self tapping screws etc complete all as specified and as directed. |
| 15 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, including cranking to shape as specified and fixed with self tapping screws etc complete all as specified and as directed. |
| 16 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified. |
| 17 | M&L for mild steel work tubular pipes as in posts/truss/purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 etc complete all as specified and directed. |
| 18 | S&F Mild steel Fe 410-W (Grade E-250 quality A) plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment and fixed by riveting or welding or with and including nuts and bolts etc complete all as specified and directed. |
| 19 | S&F MS work in wind ties for roof including securing bolts etc complete all as specified and as directed. |
| 20 | M&L for preparation of new steel or iron surfaces of any description, any width or girth, not otherwise described and applying two coat of Epoxy anti-corrosive paint over a coat of red oxide, zinc chrome primer etc complete all as specified and as directed. |
| 21 | S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device etc complete all as directed. |
| 22 | S&F in repair bathroom mirror 630x445mm rectangular shape of Kubix prime range Jaquar Cat Part No AKP-CHR-35795 or substantially equivalent etc complete all as specified and directed. |
| 23 | S&F in repair chromium plated hand shower (health faucet) 1 meter, with PVC tube with wall hook, complete all as specified and as directed. Make : Jaquar cat part No ALD-CHR-573 or substantially equivalent. |
| 24 | S&F in repair Toilet paper holder,with flap type fixed to wall with CP brass screws. Make : Jaquar cat No ACN-CHR-1153S or substantially equivalent. |
| 25 | S&F in repair CP two way bib cock of Make Jaquar Cat Part No ARI 39041 or substantially equivalent all as specified and as directed |
| 26 | S&F in repair aluminium anodised chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed. Make : Jaquar cat No AKP-CHR-35711PS or substantially equivalent |
| 27 | S&F in repair 15mm dia angle cock cast copper alloy with capstan head, chromium Plated, screwed down high pressure with crutch or butterfly handle for iron pipe etc complete all as specified and directed. Make : Jaquar Cat Part No. OPP-CHR-15053PM or substantially equivalent. |
| 28 | S&F in repair metropole flush valve regular 32 mm size (concealed body) with exposed shut off Provision and Round Flange for WC etc complete all as specified and as directed. Make : Jaquar Cat Part No. FLV-1095 or substantially equivalent. |
| 29 | S&F in repair 15mm Pillar cock chromium plated cast copper alloy, fancy type with cruttch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and complete all as specified and as directed. Make : Jaquar cat part No OPP-CHR-15001PM or substantially equivalent. |
| 30 | S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length, with rubber joints, fixed to walls |
| 31 | S&F PVC (SWR) 110mm dia bend of any radius complete all as specified and directed. |
| 32 | S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia pipecomplete all as specified and as directed |
| 33 | Taking down carefully, copper/aluminium point wiring (Light, fan, scoket or power) complete, including fittings and fixtures such as switches, ceiling roses, regulators, sockets etc., and making good disturbed surfaces of walls floors, etc., complete all as specified and as directed by Engineer-in-Charge. |
| 34 | M & L for point wiring with PVC insulated FRLS 1100 Volts grade single core multistranded copper conductor cable 1.5 Sqmm drawn through in and including 19 mm thick rigid non metallic PVC conduit medium quality with all accessories, fittings, PVC junction boxes etc, with necessary fixing accessories and earth continuity conductor cable of 1.5 Sqmm size connected to common earth and earth dolly including 1.6 mm thick pressed steel terminal boxes suitable for modular fittings, concealed in wall for mounting switches / sockets / fan regulators fixed with Cadmium plated machine screws and making good the disturbed surface all as specified |
| 35 | All as per item No. 34 here - in - before but for one wall fan point controlled by one 5 Amps switch. |
| 36 | All as per item No. 34 here - in - before but for 3 pin 5 Amps switch socket combination on independent board. |
| 37 | All as per item No. 34 here - in - before but for 5 Amps socket point on the same board controlled by one switch. |
| 38 | All as per item at sl No.34 here in before but with copper conductor cable for one 3 pin socket outlet, 15 amps independent, with cable 4 Sqmm size and 4 Sqmm earth continuty conductor, complete all as specified and as directed by Engineer-in-Charge. |
| 39 | Supply and fix ceiling rose surface baklite 65 x 50 mm 3 terminal, complete all as specfified and as directed by Engineer-in-Charge. |
| 40 | Supply and fixing Modular switch 1 way 5 A, 1 module all as specified and directed. |
| 41 | Supply and fixing Modular switch 1 way 15 A, 1 module all as specified and directed. |
| 42 | Supply and fixing modular socket outlet, 2/3 pin combined , 6/16 Amps, combined 2 module, 230 volts all as specified and directed. |
| 43 | Supply and fixing modular socket outlet, 2/3 pin combined , 6 Amps, combined 2 module, 230 volts all as specified and directed. |
| 44 | S & F modular white cover plate with frame, 3 module all as specified and directed. |
| 45 | S & F modular white cover plate with frame, 6 module all as specified and directed. |
| 46 | S & F modular white cover plate with frame, 8 module all as specified and directed. |
| 47 | Supply and fix in repair metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs, including taking down old MCB/DB, complete all as as specified and as directed by Engineer-in-ChargeNote:- Incoming & Outgoing connections from the DB shall be provided with proper lugs/thimbles etc... |
| 48 | All ae per item no 47.00 above but of SPN 4 way DB complete all as specified and directed. |
| 49 | Supply and fix in repair single pole and netural 240 Volts 32 amps complete all as specified and as directed by Engineer-in-Charge |
| 50 | Supply and fix in repair MCB single pole 240 volts, 6 to 32 amps, B series complete all as specified and as directed by Engineer-in-Charge |
| 51 | Material & labour, earthing complete with galvanize steel earth plate electrode 60 cms x 60 cms x6.00mm thick buried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4.0mm by means of bolts ,nuts ,check nuts and washers of galvanized iron or steel and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron or steel pipe light grade 40 mm bore and water pipe 20 mm bore GI light grade (ISI marked ) with funnel and wire mesh ,including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No, 5 of MES Sch Part-1 (2009), complete all as specified and directed. |
| 52 | Supply and fix in repair aluminium housing LED bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected. |
| 53 | Supply and fix recess mounted LED 18 w Round type downlighter with die cast aluminium housing coating prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, including taking down old unserviceable fitting of any wattage, complete all as specified and directed by Engineer-in-Charge. |
| 54 | All as per item no 53.00 above but of capacity 12 W complete all as specified and as directed. |
| 55 | S&F in repair 35 W long life versatile pressure dia cast aluminium IP65 road way luminaire with high power LEDs as light and electronic driver complete with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete as directed. |
| 56 | M & L in repairs for sub main wiring complete with two runs of 4 Sqmm FRLS single core PVC insulated single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Conduit and all accessories fixed to wall/ roofs/ floors etc with one run of 4 sqmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of conduit & one run of earth continuity conductor shall be measured as one running metre. Please Enable Macros to View BoQ information |
