|
| 1 | M&L fly ash brick work with modular 'B' bricks in cm 1:6 using modular bricks straight or curved on plan to any radius including Demolition complete all as specified and directed. |
| 2 | M&L 15mm thick rendering intwo (10mm+5mm ) CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement including Taking down cement plaster on brick or stone walls/ceiling etc. complete all as specified and directed. |
| 3 | M&L for preparation of newly plastered surface of wall and and applying two coat of oil emulsion distemper white/coloured including one coat of white cement based putty complete all as specified and directed. |
| 4 | M&L for Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm after complete removal of old decorated surface of wall complete all as specified and directed. |
| 5 | M&L for preparation of newly plastered surface of wall and applying two coats of exterior weather proof water base emulsion paint, complete all as specified & directed by. |
| 6 | M&L complete removal of old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over one coat white cement putty on walls/ceiling complete all as specified and directed. |
| 7 | M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work including Demolition of concrete in ground floors and pavings (un reinforced) nexc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 8 | M&L Screed bed or beding layer of mortar 15mm thick for laying floor finish in CM 1:6 complette all as specifed and directed |
| 9 | M&L for rendering 10mm thick on fair faces of brick work or concrete surface back coat to walll tile in CM 1:4 complete all as specified and directed |
| 10 | M&L for Endura joint free colour tiles 8 to 10 mm thick (square/rectangular) area of each tiles not exceeding 0.36 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles including Demolition complete all as specified and directed. |
| 11 | M&L for Endura joint free colour tiles 8 to 10 mm thick (square/rectangular) area of each tiles not exceeding 0.36 sqm , as in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with complete including Demolition complete all as specified and directed. |
| 12 | M&L for vitrified glazed light shade tiles 8 to 10 mm thick (square/rectangular) polished, of any shade area of each tiles exc .18 sqm but not exceeding .36 Sqm, in floors etc, set and jointed in neat cment slurry and pointed in white or coloured cement to match including Demolition complete all as specified and directed. |
| 13 | M&L for vitrified glazed light shade tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles exc .18 sqm but not exceeding .36 Sqmas in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with complete including Demolition complete all as specified and directed. |
| 14 | M&L glazed ceramic coloured tiles in vertical surfaces 350x250x7mm /450x350x7mm thick set and jointed in cement slurry with joint free and pointed in white or coloured cement to match tiles with complete all as specified and directed. |
| 15 | S&F Pre-painted galvatume aluminium Zinc coating GI based corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified including Dismantling Asbestos cement (Corrugated, semi corrugated, etc) sheets including ridges in roof covering complete all as specified and directed. |
| 16 | S&F Pre-painted galvatume aluminium Zinc coating GI based plane steel sheet of 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified including Dismantling Asbestos cement (Corrugated, semi corrugated, etc) sheets including ridges in roof covering complete all as specified and directed. |
| 17 | M&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 18 | M&L steel work in tubular/angle trusses including special shaped washers, purlins, rafters, posts etc using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade St-240 complete all as specified and directed. |
| 19 | M&L for Preparation new steel surface of any description and applying two coats of synthetic enamel painting over one coat of Red oxide, Zinc Chrome primer complete all as specified and directed. |
| 20 | S&F GI frame work size of grid 605 mm x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylong sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two ea\qual flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kuled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Dismantling wall and ceiling boards of any description fixed in any position, any thickness including cover fillets complete all as specified and directed. |
| 21 | Providing and fixing 12mm Gypsum board ceiling fixed with GI angle/channel frame work incl GI wire/ mesh, etc in different levels all complete including joints filled with paster of paris, putty including POP work/Cornices and applying two coat of oil bound distemper including Dismantling wall and ceiling boards of any description fixed in any position, any thickness including cover fillets complete all as specified and directed. |
| 22 | S&F in repair/replacement Solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed. |
| 23 | S&F in repair/replacement Factory made solid panel PVC door shutter 30 mm thick consisting of frame made out of M.S. tube for top and bottom rails .Ms. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2mm width stuck inside with solvent cement for stiles and plain colur PVC sheet for top rails ,lock rail &bottom rail ,panel will be of wire gauze in lieu of PVC Sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube. The wire gauge shall be stretched to tighten firmly complete all as specified and directed. |
| 24 | S&F in repair/replacement Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65*100 mm comprisingof virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 25 | S&F in repair/replacement to Factory made single extruded WPC (WoodPolymer Composite) solid plain flush door shutter of 30 mm comprisingof virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 26 | S&F Butt hinges 125mm , extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 27 | S&F Butt hinges 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed. |
| 28 | S&F 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed. |
| 29 | S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 30 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed. |
| 31 | M&L for granite tiles of 15-18 mm thick on vertical surface such as skirting, dado, steps, wash basin table top, flooring, kitchen slab, machine cut beddded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including rendering 15 mm thick back coat in CM (1:6) complete all as specified and directed. |
| 32 | S&F in reapir 18mm plywood grade BWR, type BB fixed with screws to timber frame work complete all as specified and directed. |
| 33 | S&F in reapir 0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed. |
| 34 | S&F in repair to Cabinet Hinges Soft Close SS 8 Crank complete all as specified and directed |
| 35 | S&F 100 mm Stainless steel handle , cast type, polished bright complete all as specified and directed. |
| 36 | S&F in repair to magnetic catcher for cupboard shutter complete all as specified and directed. |
| 37 | S & F kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 200mm complete all as specified & directed. |
| 38 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat, channel etc for fixing etc. including taking down complete all as specified and directed. |
| 39 | S&F 4.0mm thick plain sheet glass ordinary quality nexc 0.50Sqm in each pane including Hacking out old broken glass (any thickness quality or description) complete all as specified and directed. |
| 40 | S&F 4.0 mm thick plain sheet glass ordinary quality exc 0.50Sqm in each pane including Hacking out old broken glass (any thickness quality or description) complete all as specified and directed. |
| 41 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed to frames complete all as specified and directed. |
| 42 | S&F in repairs CP fancy type Bib taps, cast copper ally with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 43 | S&F Tubes 15mm dia, `Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking down complete all as specified and directed. |
| 44 | S&F Tubes 20 mm dia, `Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking down complete all as specified and directed. |
| 45 | S&F in repair 75 mm PVC(SWR) pipes Single socketed in any length with rubber rings joints laid in trenches or in floors including Taking down eaves gutters and rainwater pipes (any size or pattern), complete all as specified and directed. |
| 46 | S&F in repair of PTMT waste coupling, 32 mm dia, half or full thread, complete all as specified and directed. |
| 47 | S&F in repair of PVC waste pipe 900mm long, 32mm dia size, complete all as specified and directed. |
| 48 | S&F in repair of SS grating of 125 mm dia size, complete all as specified and directed. |
| 49 | S&F in repair 75mm PVC(SWR) bend complete all as specified and directed. |
| 50 | S&F in repair 75mm PVC(SWR) junction single (single 'T') equal or unequal complete all as specified and directed. |
| 51 | M&L in repair PVC (SWR) floor trap plain with grating incl jointing with solvent cement 75mm bore complete all as specified and direcetd. |
| 52 | S&F in repairs 15 mm Angle valve stopcock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 53 | S&F in repair wash hand Basin Counter top having size 440 x 440 x 135 or 420 x 345 x 170 mm rectangular/oval shape complete all as specified and directed. |
| 54 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. including Dismantling work complete all as specified and directed. |
| 55 | S&F in repairs PVC low level flushing cistern of 10 Litres with all internal fittings incl flush pipe and fixing to supply pipe complete all as specified and directed. |
| 56 | S&F in repairs 15 mm pillar taps (having weight not less than 0.960 kg as per SSR Part I clause 18.16.2) cast copper alloy, with capstain head .chromium plated screw down high pressure, with or without lettered HOT or Cold with long shanks and fly-nuts screwed for iron pipes and fixed complete as in repair incl necessary small GI fittings complete all as specified and directed. |
| 57 | S&F in repairs 15 mm Fancy Type Swan Neck taps cast copper alloy, with capstain head .chromium plated screw down high pressure, with long shanks and fly-nuts screwed for iron pipes and fixed complete incl necessary small GI fittings complete all as specified and directed. |
| 58 | S&F in repair to CP Health faucet (ABS body) mild steel chromium plated suitable for 15mm bore with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all necessary fittings and accessories complete all as specified and directed. |
| 59 | S&F in repair to PVC connections 15mm size with PTMT nuts of length 600mm.complete as in repairs complete all as specified and directed. |
| 60 | S&F in repairs Plastic water closet seat cover, any colour, closed pattern with flat bottom, and mild steel chromium plated for aluminised hinging device complete all as specified and directed. |
| 61 | S&F in repair tubular towel rail chromium plated 20 mm dia D type 60 cm long between flanges complete all as specified and directed. |
| 62 | S&F in repair to 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed. |
| 63 | S&F in repairs vitreous china wash down water closet pan (padestal pattern), white (excluding flushing costern and flush pipe) complete all as specified and directed. |
| 64 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup complete all as specified and directed. |
| 65 | S&F in repairs glass shelf (with bracket) of 22 inch long chromium plated fixing complete all as specified and directed. |
| 66 | S&F inrepair CP toilet paper holder with stainless steel flap complete all as specified and directed. |
| 67 | S&F inreapir soap dish holder of bootom Cp and glass holer for soap complete all as specified and directed. |
| 68 | S&F inrepair CP towel ring round with round flange complete all as specified and directed. |
| 69 | S&F in repairs 10 to 12mm thick toughfen glass in door, partitions etc similar work etc with stainless steel handle, locking arrangement and with hinges in approved shape and design complete all as specified and directed. |
| 70 | S&F solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 71 | S&F heavy weight stainless steel hydraulic patch fittings for single leaf having single bolt and single strock of minimum size 190 mm x 70 x 40 mm complete all as specified and as directed. |
| 72 | S&F Double action floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to toughened glass door complete all as specified and as directed. |
| 73 | S&F stainless steel heavy duty D-shaped patch lock and strike plated two set of keys suitable to be operated from both sides fixed to 12 mm thick glass door complete all as specified and as directed. |
| 74 | S&F heavy duty stainless steel (grade 304) H shaped handles 300 mm long fixed to toughened glass door with one pair of collar and screws complete all as specified and as directed. |
| 75 | M&L in repair 25mm Stainless Steel Drepary curtain rod decorative type incl curtain fancy type including bracket & nobs complete all as specified and directed |
| 76 | S&F 500 ltrs capacity Rotational moulded polyethylene water storage tanks 3 layers(Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including Dismantling water tanks complete all as specified and directed. |
| 77 | S & F in repair 20 mm dia ball valve PTMT, high pressure with polythene float and fly nut complete, screwed for iron pipe with epoxy coated aluminium rod complete all as specified and directed. |
| 78 | M&L for Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth beyond ; for foundation, etc. or for shafts, wells , cesspits, manholes, pier holes etc n exc 10 sqm on plan and not 1.5 m depth and getting out soft/loose soil complete all as specified and directed. |
| 79 | Returning, filing in, excavated soil including excavated in loose soil but returning filling is of Hardsoil,spreading, levelling, watering and well ramming in layers not exceeding 25cm etc complete all as specified and directed. |
| 80 | Removal of excavated soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed. |
| 81 | M&L for reinforced concrete pipes, class NP-3, laid and jointed with collars of 200 mm bore of pipe including Demolition complete all as specified and directed. |
| 82 | M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed. |
| 83 | M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 200 mm internal dia of pipe complete all as specified and directed. |
| 84 | M&L for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed. |
| 85 | M&L 15mm thick rendering intwo (10mm+5mm ) CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement including Taking down cement plaster on brick or stone walls/ceiling etc. complete all as specified and directed. |
| 86 | Taking down carefully copper/aluminium point wiring concealed/ casing caping (light, fan, socket or power) including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, call bell and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 87 | Dismantling/taking down of unserviceable old existing service /submain wire of any sizecomplete all as specified and directed. |
| 88 | Dismantling/taking down of unserviceable distribution boards with MCBs/change over switches any type complete all as specified and directed. |
| 89 | Taking down carefully 1.5/2 TR ACs any type of any size from its position with all precaution , and refixing on its original position in fully serviceable condition by gas charging & petty repairing properly complete all as specified and directed. |
| 90 | M&L for concealed point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and includidng single core PVC insulated unsheathed flexible conductor FR-LS cables 1.5 sqmm as per IS 694:2010 ISI marked annealed multistranded copper conductor drawn through and including medium machenical strees PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20mm noninal size including modular / non modular type all accessories/fitting / metal flush box / cover plate/junctiion boxes/ inspection cover etc ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistaranded copper conductor FR-LS cable as continious earth wire connected to metalic body at one end and common earth dolly to other end including cost of cutting chase and making good to distrubed surfaces of wall with cement mortor 1: 3 including necessary plaster and poiinting in cement mortor 1:3 with white wash / distemper/ other painting complete all as specifiecd and as directed (Note cost of cutting chase and making good shall be included in the quated rates) |
| 91 | All as per item No 90 above but one socket outlet 5 pin 5/6 Amps on independent board controlled by one, one way switch complete all as specified and directed. |
| 92 | All as per item No 90 above but one socket outlet 5 pin 5/6 Amps on same board with other one, one way switch complete all as specified and directed. |
| 93 | All as per Srl item No. 90 here in before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 2.5 Sqmm and 2.5 Sqmm as earth wire complete all as specified and directed. |
| 94 | S & F modular bell push 6 Amp one module, 240 volts complete all as specified and directed. |
| 95 | S & F modular switch one way 6 Amp one module, 240 volts complete all as specified and directed. |
| 96 | S & F modular switch one way 16 Amp one module, 240 volts complete all as specified and directed. |
| 97 | Supply and fixing modular socket outlet 2-in-1, 2/3 pin, 6/16 Amps, 240 volts, controlled by one switch complete all as specified and directed. |
| 98 | Supply and fixing modular socket outlet 2-in-1, 2/3 pin, 6 Amps, 240 volts, controlled by one switch complete all as specified and directed. |
| 99 | Supply and fix sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one Single pole MCB 240 V grade 25/20 Amp complete all as specified and directed . |
| 100 | Supply and fix modular combo AC box (incl socket ,plug top and 25 Amp MCB's) 240 V,50 Hz an ISI-marked, impact-resistant body and Built with high-impact polycarbonate materials that offer high softening temperatures, ensuring long-lasting performance complete all as specified and directed . |
| 101 | S&F call bell Bell Multi Music type 230V, AC, single phase ISI marked complete all as specified and directed. |
| 102 | S&F modular ceiling rose 3 terminals 65x25 mm dia poly carbonate isolated complete all as specified and directed. |
| 103 | S&F modular lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 104 | S&F 12 watt invertor rechargeable B22 D type LED bulb cool day light with min 4 hrs back up, 230/240V, AC complete all as specified and directed. |
| 105 | Supply and fixing modular fan regulator compatable with BLDC fan complete all as specified and directed. |
| 106 | S&F LED tube light fitting bright 20 watt. slim elegant design. and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector complete all as specified and directed. |
| 107 | S&F LED tube light fitting bright 10 watt. slim elegant design. and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector complete all as specified and directed. |
| 108 | S&F in replacement of building security light fitting complete with 36 watt,IK 08 LED type pressure die cast aluminium housing and heat resistant toughened glass with frame protection (IP 66 protection) and better optics for uniform distribution complete fixed bracket made out of GI pipe 32 mm dia (light grade) 1.5 metre long and MS clamp and nut bolts washers and connected with twin core cable 1.5 sqmm from ceiling rose to fittings connector complete all as specified and directed. |
| 109 | S&F sheet metal enclosure double door type surface SPN DB mounted concealed in wall 12 ways, 240 Volts, ISI marked 200 amps bus bar dust and vermin proof IP54 protection ,suitable for incorporation MCBs and isolators etc complete all as specified and directed. NOTE:- MCB shall be measured and paid separately. |
| 110 | S&F sheet metal enclosure for MCB, DB, TPN, 415 Volts, 200 amps rated busbar, 4 way, Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 54 including wooden rectangle board of first class hardwood of suitable size for mounting of DB box complete all as specified and as directed. NOTE:- MCB shall be measured and paid seperatly. |
| 111 | Supply and fix in replcement MCB 6-32 amps, 10 KA, SP 240 volt, 'C' series complete all as specified and directed. |
| 112 | All as per item No 25 here in before but MCB SPN 40 amps complete all as specified and directed. |
| 113 | All as per item No 25 here in before but MCB TPN 63 amps complete all as specified and directed. |
| 114 | M&L in replacement for sub main wiring (Single phase) with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 4 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:- Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length. |
| 115 | M&L in replacement for sub main wiring (Single phase) with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:- Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length. |
| 116 | Supply and fix of LED slim square/circular panel light fitting for surface ceiling light 12 watt, colour warm including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector complete all as specified and directed. Please Enable Macros to View BoQ information |
| 117 | Supply and fix of LED slim square/circular panel light fitting for surface ceiling light 12 watt, colour warm including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector complete all as specified and directed. Please Enable Macros to View BoQ information |
