|
| 1 | Site cleaning including cutting and dressing of the existing vegetation (trees/bush/plants/glass, etc.,) of all types and all sizes wherever required for the approches and the work alignment of area, etc. complete all as specified and as directed. |
| 2 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth and getting out Soft/ loose soil complete all as specified and as directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and wall ramming in layers not exceeding 25 cm. complete all as specified and as directed. |
| 4 | Spreading and levelling excavated soil in layers n exc. 25 cm thick in floor area. complete all as specified and as directed. |
| 5 | M&L for Hardcore of gauge n exc 63mm deposited, spread and levelled in layers and exc. 15 cm thick watered and rolled/rammed to a true surface with broken stone or boulders complete all as specified and as directed. |
| 6 | M&L for Treating with anti termite treatment to the back fill in contact with foundation at the rate of 7.5 liters of emulsion per sqm of vertical surfaces (Area of sub structure in contact with back fill to be measured). complete all as specified and as directed. |
| 7 | M&L for Treating with anti termite treatment to the top surface of fIlled earth at the rate of 5 liters of emulsion per sqm of surface. complete all as specified and as directed. |
| 8 | M&L for Treating with anti termite treatment to the soil under plinth protection at the rate of 5 liters of emulsion per square meter of surface area. complete all as specified and as directed. |
| 9 | M&L for Cement concrete in foundation filling and mass concrete type D-2 1:4:8 below column (using 40 mm grade crushed stone aggregate) complete all as specified and as directed. |
| 10 | M&L for RCC Design mix M-25 grade crushed stone aggregate in Foundations including rafts, footings, foundation, plinth beams, bases for columns, etc: basement slabs, underreamed piles and masss concrete (nominal mix) complete all as specified and as directed. |
| 11 | M&L for RCC Design mix M-25 as in beams bends etc. using 20mm graded crushed stone aggregate complete all as specified and as directed. |
| 12 | M&L forRCC Design mix RCC M-25 as in columns, pillars,posts and struts using 20mm graded crushed stone aggregate complete all as specified and as directed.. |
| 13 | M&L for RCC Design mix RCC M-25 grade crushed stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 14 | M & L for 75mm thick PCC 1:3:6 type C1, (using 20mm graded crushed stone aggregate) as in plinth protection laid in panels including finished the surfaces smooth and even without using extra cement complete all as specified and as directed. |
| 15 | M & L for precast reinforced cement concrete 1:2:4, type B1 (using 20 mm graded crushed stone aggregate) as in cover slab of manholes, septic tank etc, set in cement mortar (1:4) including necessary form, moulds etc and including taking out/removal of existing unserviceable cover slab from manholes /septic tank complete all as specified and as directed.(Note :- Reinforcement shall be measured and paid separately) |
| 16 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and bending with and including mild steel wire (annealed) not less than 0.9mm dia for securing with clips quality confirming to IS:1786 complete all as specified and as directed. |
| 17 | M&L for mild steel TMT bars 5 to 10 mm dia and over and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking beinding spirally hopping and binding wisth and dincluding mild steel wire (annelid not less than 0.9mm dia) as in stirrups etc.complete all as specified and as directed. |
| 18 | M&L for Pre-cast cement concrete block masonry with solid blocks type C1 (1:3:6) (using 20mm graded crushed stone aggregate) set in CM 1:6, exc. 10 cm in width and setting in mortar, complete all as specified and as directed. |
| 19 | M&L half brick work with sub class B bricks burnt straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and as directed. |
| 20 | Formwork to sides of concrete foundation, footings, bases of columns, raft & raft beams, sides and soffits (if any) of foundation & plinth beams and similar work, vertical or to batter- Rough finished surface of concrete : Flat complete all as specified and as directed. |
| 21 | Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splays between floor & beams etc:- rough finished surface of concrete:- Flat complete all as specified and as directed. |
| 22 | Formwork to the sides of the pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed. |
| 23 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work with fair finished; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 24 | S&F pressed steel door frame 105x60 mm for doors/Ventilator with one or more rebates including necessary fixing lugs hinges lock strike plates complete all as specified and as directed. Note: (pcc filling of holloow section measured and paid seprately) |
| 25 | S&F pressed steel door frame 125x60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plates comlete as specified and directed. Note: (pcc filling of holloow section measured and paid seprately) |
| 26 | M & L PCC typeC-1,1:3:6 (using 20mm graded crushed stone aggregate) for cills,hold fast filling of hollow of pressed steel door frame etc complete all as specified and as directed. |
| 27 | S & F 35mm thick 2nd class hard wood glazed skeleton door shutters open rebated and prepared to receive glass, gauze, etc (without sah bars) and divided into square with plain, rounded, chamfered, mitred complete all as specified & directed. |
| 28 | S&F for 35mm thick factory made plain framed panelled shutter of 2nd class HW (any Number of panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm th venered particle board with veneering on both face kiln seasoned & chemically treated complete all as specified & directed. |
| 29 | ECO – 4000 Series Windows (Double Rebate Windows)Providing & Fixing Windows/ ventilators fabricated from roll framed sections made of galvanized steel colour coated/ powder coated (Base steel as per IS 513 “D” quality galvanized as per IS 277 with zinc of 120 gms/Sqr. Mtr.) with total coated thickness of 0.58mm.Paint Specifications:Coated sections should be with Primer coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyester paint of 12-16 microns thick or Powder Coated with pure Polyester up to 50-60 microns thick.Dimensions of Sections:Sections for Frame should be of 72mm x 55mm, Section for Mullion should be of 72mm x 50mm, Section for Shutter Frame should be of 47mm x 20mm, Section for Fixed Glass Bead should be of 12mm x 12mm, and Section for Fly Mesh should be of 40mm x 20mm.Fixing Details: Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined with Frame/Mullion using Mullion Cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and Fixed Glass. Spoon Section should be used around Fly mesh to fix Mesh in Mesh Shutter.Accessories:Each Glazed Shutter and Mesh shutter should be provided with SS Pivot Hinges – 1 set, Seccolor Handle & Seccolor Stay.Window Frame should be fixed to brick/ concrete masonry by using Nylon self expanding caps and driving MS electroplated 80mm long screws into the caps through frameGlass: Glass shutter & Fixed Glass portions should be provided with a glass of 4MM Plain Float Glass.Mesh:Mesh Shutter should be provided with a Stainless Steel Fly mesh of 304 grades. Grill:Windows should be provided with Grill made of 10mm sq. MS Bars welded to at 150mm center-to-center, 5mm x 10mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws. |
| 30 | S & F Solid PVC Moulded Door Frame of size 50mm X 47mm made out of 5mm wood grain PVC sheet reinforced with M S Square tube in opening as per manufacturers instructionscomplete all as specified and as directed. |
| 31 | Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2, raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, with particle board core in frame at site as per specification & drawing.complete all as specified and as directed. |
| 32 | S&F stainless steel wire cloth, 0.36mm nominal dia of the wire and average width of apperature 1.4mm and fixed with tinned tacks of stainless stee wire staples. complete all as specified and as directed. |
| 33 | S & F stainless steel 100mm butt hinges medium weight cold rolled complete all as specified and as directed. |
| 34 | S & F 125mm butt hinges heavy weight cold rolled mild steel complete all as specified & directed. |
| 35 | S&F, 200 mm long aluminium anodised barrel barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 36 | S & F Aluminium anodised barrel tower bolts 125mm of extrded section complete all as specified & directed. |
| 37 | S&F, 125 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 38 | S&F, 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 39 | S&F 300mm long aluminium alloy anodised sliding door bolts, with haps and staples (bolt type) and fixing clips of sheet, cast oions or cast aluminium alloy and fixed. with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed |
| 40 | Floor door stopper of size 150mm alloy body & tongue,anodised,with hard drawn steel spring,fixed in floor. complete all as specified and as directed. |
| 41 | M&L for Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,over 15mm thick screed bed in CM 1:6 . set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed. |
| 42 | M&L for glazed ceramic coloured tiles of size 300x450x7mm thick in vertical surfaces of wall skirting & dadosset and jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick rendering in CM 1:3.complete all as specified and as directed. |
| 43 | M & L for Non skid ceramic coloured tiles 7 to 8mm thick (Squared/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed of 15mm thick in CM 1:6.complete all as specified and as directed. |
| 44 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm in skirting, over 10mm thick screed bed in CM 1:3 on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed. |
| 45 | M & L for 10 mm thick rendering in Cement Mortar 1:3 on fair faces of Brick works or Concrete surfaces in ceilings and finishing even and fair without using extra cement. complete all as specified and directed. Note : Roof projection/sun shade portion upto ht 7.50m incl necessary scaffolding complete all as specified and as directed. |
| 46 | M&L for rendering 10mm thick on fair faces of brick or concrete surfaces of wall in CM 1:6 complete all as specified and as directed. |
| 47 | M&L for rendering 15mm thick on other then fair faces of brick or concrete surfaces of wall in CM 1:4 complete all as specified and as directed. |
| 48 | M & L for applying two coat of distemper oil emulsion on walls over a coat of primer over 1.0mm thick Birla wall care putty including preparation new plastered wall surfaces complete all as specified and directed. |
| 49 | M & L for two coats of cement base paint over a coat of primer including preparation of newly plastered surfaces of wall complete all as specified and directed. |
| 50 | M&L for preparation newly wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 51 | S & F vitreous china squatting pan 'Orissa pattern' size 508 x 440mm white, integral foot rests including flushing cistern and flush pipe, PVC connection of size 450mm complete all as specified and as directed |
| 52 | S&F EWC Pedestal pattern WC ,any colour incl EWC seat Cover,10 ltr capacity PVC ,LLFC,32 mm dia PVC flush pipe including CP Toilet holder etc complete all as specified and directed. |
| 53 | S & F tubular towel rail brass chromium plated 20mm dia D type 60 cm, between the flangers complete all as specified and as directed. |
| 54 | S & F bib tap 15mm bore, fancy type, chromium plated, cast copper alloywith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 55 | S&F in repairs 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts. complete all as specified and as directed. |
| 56 | S&F in repairs two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup complete all as specified and as directed. (Make : Prayag Cart Part No PIS-12 H or marc/jaqnar) |
| 57 | S&F 25 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe as in repairs complete all as specified & directed. |
| 58 | Providing and fixing soap dish, vitreous china white, approximate size 160x160x90mm. complete all as specified and as directed. |
| 59 | S&F 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement complete all as specified and as directed. |
| 60 | S&F 100mm dia stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to ball or roof complete all as specified and as directed. |
| 61 | S&F 600mmx450mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer complete all as specified and as directed. |
| 62 | S&F PVC connection 15mm bore length not less than 450 mm long with both ends PTMT nuts complete all as specified and as directed.. |
| 63 | S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 64 | S&F 75 mm bore. PVC (SWR) bends complete all as specified and as directed. |
| 65 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed. |
| 66 | S&F 110mm bore PVC (SWR) bends with oval access door complete all as specified and as directed. |
| 67 | S&F 110 mm PVC (SWR) bend any radius complete all as specified and as directed. |
| 68 | S&F 110mm bore.PVC(SWR) junction single (single T) equal or unequal with access door complete all as specified and as directed. |
| 69 | M&L for cutting into existing manholes for connecting new drain, making good to pipe rendering, cutting out existing benching for and forming branch channel(1/2 round and 3/4 secton) in cement concrete (1:2:4) type B-1 smooth finished and reforming bencing as required for 150mm dia complete all as specified to directed. |
| 70 | S&F 25mm Stainless steel curtain rods incl required nos of brackets complete all as sepcified and directed. |
| 71 | S&F mild steel300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 72 | S&F 20 mm dia Ball valves ,high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and as directed. |
| 73 | S&F rotational moulded polyethylene water storage tank consisting of three laver cylindrical vertical with top closed hoisted and fixed in position all as specified and directed capacity 1000 ltrs. complete all as specified and as directed. |
| 74 | Supplying and laying of 20mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in walls/ floor/roof and trenches with CPVC pipe or GI pipe including all necessary fittting and taking down of GI/CPVC pipe complete all as specified and as directed. |
| 75 | Supplying and laying of 25mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in walls/ floor/roof and trenches with CPVC pipe or GI pipe including all necessary fittings and taking down of GI/CPVC pipe complete all as specified and as directed. |
| 76 | Supplying and laying of 32mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in walls/ floor/roof and trenches with CPVC pipe or GI pipe including all necessary fittings and taking down of GI/CPVC pipe complete all as specified and as directed. |
| 77 | Supplying and Fixing in repair counter top wash basin of size 505 mm x 435 mm x 180 mm with and including necessary fitting complete as specified and as directedmake:Jaquar mdel No:-KUS-WHT-3560/Hindware/Kohlar |
| 78 | S & F mild steel hold fast & similar articles confirming to Fe-290 Gde E-165. complete all as specified and as directed. |
| 79 | Vitreous China Urinal, full stall type, white complete including 32mm coupling, 15mm PTMT urinial spreader, providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to lushing cistern, trap and waste pipe complete all as specified and as directed. |
| 80 | S&F concealed stop cock but fancy type 15mm dia, chromium plated with long shank and cup (concealed type). complete all as specified and as directed. |
| 81 | S & F prepainted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPA asin roof covering/cladding to wall fixed with self tapping screws as specified complete all as specified and as directed.. |
| 82 | S&F pre painted galvalume aluminium zinc coating GI based plain steel sheeting 0.5mm thick of any colour haing tensile strenghth of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws as specified complete all as specified and as directed. |
| 83 | S & F roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces cleats etc confirming to grade Fe-410 W E250 quality A complete all as specified and as directed. |
| 84 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks including the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and extra sand complete all as specified and directed. |
| 85 | M & L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone crushed aggregate) as in sub base complete all as specified and as directed. |
| 86 | S&F for 18 mm thick , prelaminated medium density fibre (MDF) , interior grade, prelaminated one side with decorative choice lamination and other side balancing white with lamination fixed with screw to timber/ steel frame work as in CB shutter, shelves etc with PVC liping on all exposed edges on same texture and shade. Stainless steel cleat of suitable size will be use to fix the shelves of CB and cabinets. |
| 87 | M&L for preparing plastered surfaces and applying primer @ 0.30/Kg per sqm and applying tack coat of bitumen 85/25 @ 1.2 kg/Sqm laying 3.0mm thick polyster reinforced APP modified water proofing membrane weighing not less than 3.5kg/sqm 100 mm overlaps both longitudinally and transversely by torch bonding over coat of hot blown and one coat of bitumen based paint @1.20 ltr/sqm over APP membrane including removal of existing water proofing treamant on roof with plaster, sunken slabs, edges and vertical surfaces complete all as specified. |
| 88 | M&L for applying a coat of reflective bitumenous aluminium paint @ 0.15 Kg / sqm over Bitumen surface complete all as specified and as directed. |
| 89 | M & L for 10mm thick rendering in CM 1:4 using water proofing compound over concrete surfaces @3% of the weight of cement used or as per manufacturer's instruction complete all as specified and directed. ( Note : WPC measured and paid separately) |
| 90 | Supply only water proofing compound complete all as specified and as directed. |
| 91 | Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated all kind of soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and as directed. |
| 92 | Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar 150mm dia. complete all as specified and as directed. |
| 93 | M & L for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregates for 150mm dia pipe. complete all as specified and as directed. |
| 94 | M & L for SWG drain pipes grade 'A' of 150mm internal dia laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed. |
| 95 | S & F for PVC (SWR) gully trap of 125/110mm dia set and jointing with solvent cement complete all as specified and directed. |
| 96 | Supply and laying cable XLPE insulated screened PVC bedded, Galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of 10 sqmm 4 core complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 97 | Supply and laying cable XLPE insulated screened PVC bedded, Galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of 10 sqmm 4 core complete all as specified and as directed. Please Enable Macros to View BoQ information |
