|
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed . |
| 2 | Dismantling of timber scantling 40 sqcm and above in section in any position, unframed work complete all as specified and directed |
| 3 | Dismantling of timber scantling in fillets rafters, purlins etc under 40 sqcm in section complete all as specified and directed |
| 4 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 5 | Fixing only clean sawn 2nd class Hard wood boarding all complete all as specified and directed |
| 6 | S&F for 20 mm thick 2nd class hard wood boarding planed one side with butt joints and fixed with nails as in roofs, ceiling partition fascia, barge soffit etc (except flooring and skirting) complete all as specified and directed |
| 7 | S & F Rolled mild steel (Fe-410W, Gde E-250) in Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed |
| 8 | S & F Mild steel work as in wind ties/holding clamps for valley gutters of roof including securing bolts including cutting tops to shape as directed, drilling holes, including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed |
| 9 | M&L for second class soft wood clean swan plain fillets, square, rectangular in section screwed with nails exc 13 & n exc 25 sqcm complete all as specified and directed |
| 10 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ 150) as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 11 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ 150) as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 12 | S&F in repairs E-boards, ceiling, 4 mm thick with J framed work with main Tee of size 24 x 28.5 mm made out of PGI sheet .3 mm thick double at web and single at flange, flange coverd with powder coated sheet 0.25 mm thick and wall angle 24 x 24 x .45 mm powder coated for ceiling , ceiling boards 60cm x 60cm x 4mm thick , suspended with GI wire 2mm dia and 2m average length with adjustable hanging device complete including plugging in brick/stone walls with steel rawl plug @ 600 mm C/C Ceiling board shall be pressed to the ceiling tee with staple clips at all four sides and making good all the disturbed portion complete all as spd & directed by GE/Eng-in-Charge. |
| 13 | M & L for PCC 1:2:4, type B-0, using 12.5mm graded crushed stone aggregate as in coping, weathering slighly rounded or chamfered angles etc including use of necessary form work all as specified and directed. Please Enable Macros to View BoQ information |
