|
| 1 | Preparation of old decorated plastered or un-plastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and filling the nail holes and small patches of peeled off plaster of size not exc 0.01 Sqm by using filling compound of Altek/Birla white putty to obtain even & smooth finish by using sand paper and applying one coat of white wash complete all as specified and directed. |
| 2 | All as per ser item No 1 above but on ceiling in lieu of wall complete all as specified and as directed. |
| 3 | M&L preparation of old distempered surface of wall, pillasters cornices etc by washing rubbing down & stopping etc and applying one coat of oil emulsion distemper complete all as specified and as directed. |
| 4 | M&L preparation of old distempered surface of wall, pillasters cornices etc by washing rubbing down & stopping etc and applying two coat of oil emulsion distemper complete all as specified and as directed. |
| 5 | Preparation of old wood or wood based surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 6 | Preparation of old steel and iron surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 7 | Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material, outside cantt area/MOD Land distance not exceeding 1.5 KM complete all as specified and directed. |
| 8 | M&L renderig/screeding 15mm thick cment mortar 1:6 on fair faces of brick or concrete surface of wall rendering is to be finished even smooth with out using extra cement complete all as directed by the Engineer - In- Charge. |
| 9 | M&L for preparation of newly plastered surface of internal wall by application of wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of distemper oil emulsion over a coat of primer using roller all as specified and prescribed by manufacture of paint and as directed . |
| 10 | Demolition of stone slab and tiles of any description or thickness in floors, laid bedded and pointed in any mortar aprons complete. |
| 11 | M & L for pre polished 18-20mm thick Granite slab white and black table rubbed in cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match incl rounded exposed edge complete all as specified and including directed.over 20 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 12 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified. |
| 13 | M&L for joint free , Non- skid coloured ceramic tiles 7 to 8 mm thick area of each tile exe 0.11 sqm but not exe 0.18, as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10 mm thick rendering in CM 1:6 Set and jointed in neat cement slurry complete all as specified & directed. |
| 14 | M&L for joint free , Non- skid coloured ceramic tiles 7 to 8 mm thick area of each tile exe 0.18 sqm but not exe 0.38, as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10 mm thick rendering in CM 1:6 Set and jointed in neat cement slurry complete all as specified & directed. |
| 15 | M&L glazed ceramic tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 15 mm thick rendering (1:6) complete all as specified and as directed. |
| 16 | S&F in repair 15 mm Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm, all as specified. |
| 17 | Dismantling of water tanks exc 500 ltr capcity but n exc 1000 ltr complete all as specified and directed |
| 18 | S&F 1000ltr capacity rotational moulded polyethylene water storage tanks triple layered white (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plasttic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms/2.0mm-455gms/40-690gms), complete all as specified and directed. |
| 19 | S&F in repair Stop valve 20mm dia bore,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 20 | S&F in repair vitreous china squatting pan 'orissa pattern 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flushing pipe but incl fixing complete all as specified and directed |
| 21 | S&F in repairs PVC valveless, syphonic action type flushing cistern (Dual action ISI Marked), low level , white, with inlet ball valve, float and handle including brackets and flush pipe suitable for IWC of polyethylene of low or high density complete all as specified and directed |
| 22 | S&F in repair Vitreous china wash hand basin in repair ,white ,flat back of size 550x400mm with PVC connection (15x450)mm long with PTMT nuts and PVC washer and including cutting for pinning in ends,pair of cast iron brackets and provision of PVC waste pipe 32mm of adequate length , waste coupling 32 mm dia of PTMT half or full threaded Min wt 45 gram,complete all as specified and as directed. |
| 23 | S&F in repair PVC pipe 32/40 mm dia as in waste pipe to sink complete all as specified and directed. |
| 24 | S&F in repair 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick commercial quality ply-wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 25 | S&F in repair CP Brass Tubular towel rail 20mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and directed. |
| 26 | S&F in repair PVC connection 15 mm size, of length 450 mm, with PTMT nuts supplied and fixed in repairs complete all as specified. |
| 27 | Supply only Pillar tap 15 mm dia fancy type, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with scrwed shanks and fly nuts, screwed for iron pipe and fixed make seiko complete all as specified and directed. |
| 28 | S&F in repair 15mm Bib tap fancy type cast copper chromium plated alloy with capstan handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 29 | S&F in repair Stop Angle valve cast copper alloy chromium plated 15mm dia, screwed down, high pressure with capstan handle, screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. |
| 30 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 31 | S&F in rep CP brass wall mixure 15mm dia including hand shower with accessories with mark Hot and Cold complete all as specified and directed. |
| 32 | S&F in rep EWC seat cover closed pattern type for pedestal pattern white complete incl CP locking bolt all as specified and directed. |
| 33 | S&F in rep corner self fency type three tier with 5.50mm thick glass mounted on CP brass frame fixed with brass screw & plug size n less than 450mm as suitable for bath room as per manufacturer instruction complete all as specified . |
| 34 | S&F in rep PVC fancy type cabinet with mirror not less than 450x600 mm size suitable for bath room complete all as specified . |
| 35 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips complete all as specified and directed. |
| 36 | S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and directed |
| 37 | S&F in rep galvanised mild steel wire cloth 0.56 mm nominal dia of wire and width of aperture 1.18 mm fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 38 | S&F in rep mild steel CP curtain rod with fixing brackets (ISI Marked) , stops ,rollrs ets complete all as specified. |
| 39 | S&F as in repair stainless steel kitchen plate rack of size 24x36x10 inch of minimum thickness 0.8mm including necessary drilling, fixing with screw, plugs in kitchen etc complete all as specified and directed.Make : Nirali/Prayag/Anjali |
| 40 | S&F in repair vitreous china wash down water closet pan (pedestal pattern EWC), white (excluding fixing bolts, flushing cistern and flush pipe) but including sheet cover and complete all as specified and directed. Please Enable Macros to View BoQ information |
