|
| 1 | Earthwork in excavation by manual means in trenches for foundation,drains, pipes,cables etc(not exceeding 1.5 mt in width)and for shafts,wells cesspits and the like not exceeding 10sqm on plan depth up to 1.5mt including disposal of excavated earth up to 1 mt from cutting edge disposed earth to be levelled and neatly dressed. All kinds of soils . |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in M-7.5(1:4:8) grade, with 40mm nominal size of aggregates. Crushed |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- all works upto plinth level 1:3:6(1 cement 3 coarse sand 6 graded stone agg. 20 mm nominal size) crushed |
| 4 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering. shuttering, finishing and reinforcement-All work upto plinth level 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) |
| 5 | Providing and laying of damp proof course of 40 mm thick with cement concrete (1:2:4),mix with 12.50 mm thick crushed stone aggregates. |
| 6 | Providing and laying in position cement concrete of specified grade of reinforced cement concrete, excluding the cost of centering and shuttering. in 1:1.5:3 (1 cement:1.5 coarse sand: 3 graded stone aggreate 20mm nominal size in suspended floors, balconies,landings and staircase having upto 15 degree slope excluding cost of centering and shuttering.All work upto floor V level. |
| 7 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) |
| 8 | Reinforcement for RCC work including straightening cutting,bending,placing in position & binding all complete with TMT bars. |
| 9 | Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in foundation and plinth cement mortor 1:6 (1 cement 6 coarse sand and extra for brick work in super structure above plinth level up floor 5 level (by manual means) |
| 10 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 11 | Half brick masonry with bricks of class designation 75 in foundations and plinth in Cement mortar 1 :4 ( 1 cement : 4 coarse sand) & Extra for half Brick masonry in superstructure above plinth level upto floor V level. |
| 12 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 13 | providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60mm thickness, including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60mm pressed, mild steel welded or rigidly fixed together by mechanical means, including M.S pressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: 10.14.1 Profile B Fixing with adjustable lugs with split end tail to each jamb |
| 14 | Centring and Shuttering including strutting, propping etc and removal of form work for foundation , footings , basis of columns etc. for mass concrete. |
| 15 | Centring and Shuttering including strutting, propping etc and removal of form work for Lintels, beams ,plinth beams, girders, bressumers and centilevers. |
| 16 | Centring and Shuttering including strutting, propping etc and removal of form work for Suspended floors, roofs, landings, balconies and access platform |
| 17 | Centring and Shuttering including strutting, propping etc and removal of form work for Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 18 | Centring and Shuttering including strutting, propping etc and removal of form work for Edges of Slabs and Break in floors and walls under 20 cm wide |
| 19 | 6mm cement plaster to ceiling of mix 1:3 (1 cement 3 fine sand) |
| 20 | 12mm Cement plaster of mix 1 : 6( 1 cement : 6 fine sand) |
| 21 | 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand) |
| 22 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding 10 mm square bar 4\\" c/c @ 4\\" c/c |
| 23 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. |
| 24 | Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 25 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,all complete as per direction of engineer- in charge.2nd class deodar wood |
| 26 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35mm thick 1st class kail wood |
| 27 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing orstudding to be paidseparately) : 12 mm thick |
| 28 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size (A) Crushed |
| 29 | Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Crushed |
| 30 | Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 31 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer |
| 32 | Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10sqm |
| 33 | Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New wood work (two or more coats) |
| 34 | Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper single core cable in surface/recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 35 | Ceiling Fan 1200mm sweep along with rod upto 1'6\\" long (3 Star) |
| 36 | Writing name of school through painter. |
| 37 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ( Size of tile 60x60cm ) |
| 38 | Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 39 | Providing and fixing lSI marked oxidised ALUMINIUM sliding door bolts with nuts and screws etc. complete 250x16 mm |
| 40 | Providing and fixing lSI marked oxidised ALUMINIUM. tower bolt black finish, (Barrel type) with necessary screws etc complete.200x10 mm |
| 41 | Providing and fixing lSI marked oxidised ALUMINIUM handles conforming to IS : 4992 with necessary screws etc. complete:100 mm |
| 42 | Providing and fixing lSI marked oxidised ALUMINIUM. handles conforming to IS : 4992 with necessary screws etc. complete:.125 mm |
| 43 | Providing and fixing steel eye hook 150 mm long complete with necessary screws etc. |
| 44 | Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :Twin rubber stopper |
| 45 | Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion Single socketed pipes 75 mm diameter |
| 46 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. |
| 47 | Carriage of materials by mechanical transport including loading / unloading and stacking complete. Sand lead up to 17 kms. |
| 48 | Carriage of materials by mechanical transport including loading / unloading and stacking complete. Stone aggregate lead up to 17 kms. |
| 49 | Carriage of materials by mechanical transport including loading / unloading and stacking complete. Bricks lead up to 7kms. Please Enable Macros to View BoQ information |
