|
| 1 | Mushaira Ghar |
| 2 | Providing and laying of soling stone size on level (hand packed ) watering ramming complete upto Plinth Band Level. Including All carriages complete |
| 3 | Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.including All carriages complete |
| 4 | Providing and laying in position specified grades of reinforced cement concrete M-25 grade in beams, slabs, walls(any thickness) including attached pillasters, buttresses, plinth and string courses, filets, columns, , stairs,pillars, piers, abutments, posts and struts etc. using 20mm thick crushed stone agg. Excluding the cost of centring, shuttering, finishing and reinforcement. All work upto roof level. |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. HYSD reinforcement of grade Fe-500D steel bars at all levels.including All carriages complete |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form work for:-Suspended floors, roofs, landings, balconies and access platforms. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for Plinth beam, lintels, beams, Girders bressumers and Cantilevers. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form work forEdges of slab and breaks in floors and walls |
| 10 | Brick work with common burnt clay (non modular) bricks claas designation 7.5 in in superstructure above plinth level upto floor five level including curing in 1:6 cement mortar. |
| 11 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class Deodar wood |
| 12 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 35 mm shutter Second class Deodar wood |
| 13 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows. Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second class Deodar wood. |
| 14 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35 mm shutters Second class Deodar wood |
| 15 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : 35 mm shutters Second class Deodar wood. |
| 16 | Providing and fixing IS : 1341 marked M.S. heavy weight - Butt Hinges with necessary screws etc., complete : |
| 17 | 125x90x4.00 mm |
| 18 | 100x75x3.50 mm |
| 19 | Providing and fixing bright finished brass door latch with necessary screws etc. complete. : 300x16x5 mm |
| 20 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 21 | Providing and fixing chromium plated brass handles with necessary screws etc. complete : |
| 22 | 125 mm |
| 23 | 100 mm |
| 24 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. : |
| 25 | 250x10 mm |
| 26 | 100 mm |
| 27 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 28 | Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. |
| 29 | Providing Wooden Jaali. (For Vent - 2 No's) all as per directions of eic. |
| 30 | Structural steel work welded in built up section for trusses and framed work including cutting hoisting, fixing in position anchor bolts and applying a primer coat of approved steel primer. |
| 31 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 32 | Providing and fixing ridges or hips of width 60cm overall in colour coated sheets 0.63 mm thick fixed with polymer coated J or L hook, bolts and nuts complete |
| 33 | Providing and fixing of 12mm thick budloo wood ceiling for soffit boarding including supporting budloo frame work complete. |
| 34 | Providing and fixing plained eaves boarding. 2nd class deodar wood 300x40 mm (nominal size ) |
| 35 | 12 mm thick plaster 1:6 (interior) |
| 36 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 37 | Distempering interiors with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 38 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 39 | Providing & making of 4 \\" POP Ornamental corner cornice including cost of all material and labour. |
| 40 | Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 41 | Removing white or colour wash by scrapping and sand papering andpreparing the surface smooth including necessary repairs to scratches etc. complete. |
| 42 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 43 | Faux Bracing by way of 15mm cement lime plaster of mix1 : 1 : 6 (1 cement : 1 lime putty : 6 fine sand) |
| 44 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20mm nominal size stone aggregate |
| 45 | Wooden planking, tongued and grooved in flooring including fixing with iron screws complete: 25 mm thick Second class teak wood For Stage (including Steps) |
| 46 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm |
| 47 | Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.including All carriages complete |
| 48 | Carriage of material from various sources to site of work avg lead |
| 49 | Stone aggregate Sand for an avg lead of 10kms. |
| 50 | Bricks for an avg lead of 15kms. |
| 51 | Demolishing |
| 52 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In mud mortar |
| 53 | Dismantling CGI roofing including ridges, hips valleys and gutters etc, and stacking the material within 50 meters lead of : |
| 54 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : Of sectional area 40 sqcm. and above. |
| 55 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 56 | Extra for cutting reinforcement bars manually/by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional areas of R.C.C. or R.B. work) as per direction of Engineer-in-charge. |
| 57 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar |
| 58 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead :Of area beyond 3 sqm. |
| 59 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area beyond 3 sqm. |
| 60 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 61 | Removing of old damaged shinglesfrom roof i/c disposal of unserviceable material as directed. |
| 62 | Renovation |
| 63 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: Description Unit Rate for a lead upto 1beyond 1 m from cutting All kinds of soil |
| 64 | Providing and laying stone soling (dully hand packed) including watering dressing and ramming with all carraiges loading un loading and stacking etc complete job |
| 65 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 66 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 67 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 68 | Plaster Work 12 mm thick (1:6) |
| 69 | Providing and laying in position specified grades of reinforced cement concrete M-25 grade in beams, slabs, walls(any thickness) including attached pillasters, buttresses, plinth and string courses, filets, columns, , stairs,pillars, piers, abutments, posts and struts etc. using 20mm thick crushed stone agg. Excluding the cost of centring, shuttering, finishing and reinforcement. All work upto roof level. Top Slab for Septic Tank |
| 70 | Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. HYSD reinforcement of grade Fe-500D steel bars at all levels. Top Slab for Septic Tank |
| 71 | Dry random rubble masonry with hard stone in foundation and plinth using nalah stones with bond stones i/c all carriages complete 20 kms. |
| 72 | Brick work with locally burnt bricks in super structure in mud motar |
| 73 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo / Fir wood |
| 74 | Providing hoisting and fixing trusses/purlins /rafters/posts/ stairs/post-plates or like components including cost of screws etc. complete First class Budloo/Fir wood |
| 75 | Providing and fixing first class deodar wood shingles for roofing i/c 1mm plain sheets underneath i/c nails, wooden beadings as per requirement etc complete job as per derections of EIC complete |
| 76 | 25mm thick mud plaster i/c adding straw as per directions of EIC complete job incld carrige complete. |
| 77 | Pointing on brick work or brick flooring withLime Mortar 1 : 1 : 1 (1 lime putty: 1 surkhi: 1 fine sand) including carraiges. |
| 78 | Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws 1st class deodar wood |
| 79 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 80 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 81 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length First class deodar wood |
| 82 | Providing Two nos of ring type Soakage Pits with 3 feet dia, 10 feet depth, including excavation, disposal of excavated material, installation of rings including top cover complete as per the instructions of Engineer in Charge. |
| 83 | P/F of 100mm dia PVC pipes for soakage pit i/c all |
| 84 | Supplying, stacking, laying and ramming of good earth at site including royalty(earth measured in stacks will be reduced by 20% for payment) incld all carriages complete. |
| 85 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil : |
| 86 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 18.11.2 Kitchen sink without drain board610x510mm bowl depth 200mm |
| 87 | Providing and fixing copper water tank (15kgs) all as per directions of EIC. |
| 88 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed withmatching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels |
| 89 | Providing and fixing of cementary head stones for graves i/c all complete job |
| 90 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.25mm thick with 12.5 mm nominal size stone aggregate. |
| 91 | Carriage of material from various sources to site of work avg lead |
| 92 | Stone aggregate Sand for an avg lead of 10kms. |
| 93 | Bricks for an avg lead of 15kms. |
| 94 | Kitchen |
| 95 | \\"Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations etc. including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil |
| 96 | Providing and laying of soling stone size on level (hand packed ) watering ramming complete below plinth level |
| 97 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:4:8 (1 cement : 4coarse sand : 8 graded stone aggregate 40 mm nominal size) PCC below Foundation . |
| 98 | Providing and laying in position specified grades of reinforced cement concrete M-25 grade in beams, slabs, walls(any thickness) including attached pillasters, buttresses, plinth and string courses, filets, columns, , stairs,pillars, piers, abutments, posts and struts etc. using 20mm thick crushed stone agg. Excluding the cost of centring, shuttering, finishing and reinforcement. All Works upto Plinth Level. |
| 99 | Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. HYSD reinforcement of grade Fe-500D steel bars at all levels. |
| 100 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 101 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 102 | Centring and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached plasters, buttresses, plinth and string courses etc. |
| 103 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarsesand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with:quarry |
| 104 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 105 | Centring and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and centilevers. |
| 106 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class deodar wood(strip along DPC 4\\"x6\\") |
| 107 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class deodar wood Dajji Wall for kitchen |
| 108 | Brick work with common burnt clay (non modular) bricks claas designation 7.5 in in superstructure above plinth level upto floor five level including curing in mud mortar. |
| 109 | 6mm Lime Plaster 1 : 2 ( 1 lime putty : 2 fine sand) |
| 110 | 25mm thick mud plaster i/c adding straw as per directions of EIC complete job (Base Coat) |
| 111 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class deodar wood Woodwork in Roof |
| 112 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete uptoany pitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape wherever required. |
| 113 | Providing and fixing ridges or hips of width 60cm overall in colour coated sheets 0.63 mm thick fixed with polymer coated J or L hook, bolts and nuts complete |
| 114 | Providing and fixing plained eaves boarding.2nd class deodar wood 300x40 mm (nominal size ) |
| 115 | Providing and fixing of 12mm thk budloo wood ceiling for soffit boarding including supporting budloo frame work complete. |
| 116 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class Kail wood |
| 117 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 35 mm shutter First class kail wood |
| 118 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : 35 mm shutters First class Kail wood. |
| 119 | Providing and fixing IS : 1341 marked M.S. heavy weight - Butt Hinges with necessary screws etc., complete : |
| 120 | 125x90x4.00 mm |
| 121 | 100x75x3.50 mm |
| 122 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 123 | Providing and fixing chromium plated brass handles with necessary screws etc. complete :100mm |
| 124 | Carriage of material from various sources to site of work avg lead |
| 125 | Stone aggregate Sand for an avg lead of 10kms. |
| 126 | Bricks for an avg lead of 15kms. |
| 127 | Stones from nearest source to site of work |
| 128 | Library |
| 129 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, all complete as per direction of Engineer-in-charge. 35mm thick Second Class Deodar wood |
| 130 | Providing and fixing decorative veneer (type 1) conforming to IS 1328 |
| 131 | 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 132 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 133 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm |
| 134 | Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.18 mm thick |
| 135 | Providing and fixing glass panes 3.5mm thick clerestory window shutters |
| 136 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 137 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 138 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 139 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 140 | Providing hardware items of standard make as per directions of EIC |
| 141 | L Drop |
| 142 | Aluminium tower bolts |
| 143 | Aluminium handle |
| 144 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 145 | Providing and fixing in position 18mm steel shutters 304 plain stainless steel railing of approved make like jindal i/c master pillar and boster on alternate steps or equlant i/c welding polishing as per directions of engineer incharge complete job. |
| 146 | Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire aperture of1.4mm wire dia .63mm for doors and windows and celestory windows including bright finished nblack enamelled M.S butt hinges imported wood |
| 147 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 148 | Providing and fixing SOIL WASTE PIPES 100MM DIA PVC B CLASS |
| 149 | Providing and fixing vent pipes dia 100mm PVC B class |
| 150 | Providing and fixing PVC Color 100mm of standard make all as per directions of EIC. |
| 151 | Providing and fixing Floor trap with jali of standard make all as per directions of EIC. |
| 152 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe , 25mm OD(SDR-7.4) |
| 153 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe , 32mm OD(SDR-7.4) |
| 154 | Providing and fixing PPR Unions PPR Union 32mm |
| 155 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 156 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 157 | Providing and fixing Stainless steel heavy duty bib cock long nose of standard make all as per directions of EIC. |
| 158 | Providing and fixing Stainless steel heavy duty angle valve of standard make all as per directions of EIC. |
| 159 | Providing and fixingPVC connections of standard make all as per directions of EIC. |
| 160 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay (non modular) bricks of class designation 7.5 |
| 161 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. |
| 162 | Providing and fixing water heater 50ltr capacity of approved makeand manufacture i/c all necessary fittings complete. |
| 163 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 164 | Tile Path |
| 165 | Providing and laying of GSB materail including watering dressing and ramming with all the carriages loading un loading and stacking etc complete job. |
| 166 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) inncld all carriages complete. |
| 167 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing.One face dressed Rough Chisel Dressed inncld all carriages complete. Please Enable Macros to View BoQ information |
