|
| 1 | Excavation of trial pit (3.0 m x 1.0 m x (upto) 3.0 m) for fixing of pumping main, washout line raking every detection against damage of S.W. pipe line electrical cable etc. as underground obstruction including 37.5 mm timber shuttering, earth cutting, dewatering, barricading and back filling etc. as per directionj of E-I-C |
| 2 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. (b) above 150 mm. Thick |
| 3 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. |
| 4 | Renewing specials only of cast iron spun pipe conforming to I.S. 1536/ 1976 including cutting trenches in any soil or through masonry, concrete etc., if necessary and mending good damages including jointing with Tyton joints as per manufacturer's specifications excluding the cost of concrete or masonry work, if required, but including the cost of filling up trenches (for all dia. specials, payment will be made on the basis of actual weight of the specials). |
| 5 | C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 andhaving all cast iron components as per I.S. 780/71 solid forged bronzeinside screw spindle having ultimate tensile strength not less than 4.72 MT per sq. cm. Spindle nut valve and seat faces of hard wear resisting,manufactured from best quality gunmetal conforming to I.S. 780/71,painted black all over with asphalt base paint tested to 21 kg (hydraulicpressure) per sq. cm., valve opening to anticlockwise direction, fitted and fixed complete. (v) 150 mm |
| 6 | Flange joint to C.l./D.l/MS. pipes and specials including supply of rubbergasket. nuts. bolts. washers etc. of best quality to make the joint watertight at required hydraulic pressure all complete as per specification & direction of the Engineer-in-Charge.150mm dia. |
| 7 | 80mm dia. |
| 8 | Lowering, fitting and fixing of all types of valves in proper position andalignment using chain pully block or crane (for diameter above 250 mm) by providing temporary support, as required, gaskets, nuts & bolts etc. all cornplete as per specification and direction of the Engineer-in- Charge. 150mm dia. |
| 9 | Sluice valve chamber with C.I. heavy cover with locking arrangement,(weight not less than 25 kg) (size of chamber 450 mm X 600 mm insideupto 900 mm depth) 250 mm thick cement brick walls (6:1), 150 mm thickcement concrete (6:3:1) bed with stone chips, 20 mm thick cement plaster (6:1) for inside wall and 15 mm thick cement plaster (4:1) for outer walls including rounding corners. |
| 10 | Making weight connection cutting main C.I line by dimond with fitting fixing C.I Tee, class Coller etc. 100 mm. to 300 mm. dia |
| 11 | Supplying, fitting and fixing Peet's valve fullway gunmetal standardpattern best quality of approved brand bearing I.S.I. marking with fittings(tested to 21 kg per sq. cm.). (iv) 50 mm dia |
| 12 | Supplying Fitting & Fixing 40mm Dia Rubber/ PVC (HD) Braided Hose pipe for Fire Fighting Line. |
| 13 | Supplying HD Pipe Fitting Clamp. |
| 14 | Delivery Charges for 40mm dia Braided Hose Pipe from Market. |
| 15 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessaryaccessories, specials viz. socket, bend, tee, union, cross, elbo, nipple,longscrew, reducing socket, reducing tee, short piece etc. fitted withholder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separatepayment will be made for accesories, specials. Payment for painting willbe made seperately) (A) For Exposed Work (ii) 40 mm dia. medium quality |
| 16 | (A) Painting with best quality synthetic enamel paint of approved makeand brand including smoothening surface by sand papering etc. Including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss) (ii) Two coats (white in shade) |
| 17 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation. Please Enable Macros to View BoQ information |
