|
| 1 | SITC of Microprocessor based programmable window alarm annunciator wall mounting panel made out 4/16 SWG CRCA Sheet with Base chanel of 75mm in black shade with gaskets, Lifting Hooks, Locks & Hinged Door with Cable Entry at Bottom and painted with Powder Coated Siemens Grey RAL 7035 shade, having Dimension 500mm(L) x 250mm(D) x 500mm(H) Approx and includes the following a) Microprocessor 16nos window alarm annunciator 240VAC, Size - H 138 x W 138mm (per window H 31.55 x W 31.55mm), Make-GIC, Model - AU2D16S -1Setb) Solid state Volume adjustable Hooter 220V AC (Make-GIC) - 1 Setc) Flash type push botton for test, reset, accept (Make-L&T) - 3 setd) PLC Extension module 110V AC-240V AC 8DI & 4DO (Make-GIC) - 3 Sete) PLC Base module 110V AC-240V AC 8DI & 4DO (Make-GIC-Genie Nx) - 1 Setf) Control MCB 6A SP 10kA MCB, 'C' Curve (Make-L&T) - 2 Setg) Neutral & Earth Link (Make- FTC/Reputed) - 1Set eachThe panel should be located in Facility Manager Office and to be fixed on the wall with 3\\"x1/4\\" M.S. Bullet fastner complete with all necy. Connections as required as per direction of EIC |
| 2 | Distn. Wiring in 1.1 Kv gr. Single core stranded ‘FRLS’ PVC insulated & unsheathed cu. wire (Make: Havells) in 20mm size PVC rigid conduit ‘FR’ (Precision make) incl. necy. fitting as reqd. as reqd. as per direction of EIC. |
| 3 | i) 2x1.5sq.mm for ECC |
| 4 | ii) 2x2.5 sq.mm + 1x1.5 sqmm for ECC |
| 5 | Supply & Laying of follwing 1.1 Kv. Grade PVC/XLPE armoured copper conductor multicore power control cable (Make: Havells) with earthing attachment in 10 SWG GI (Hot Dip) Wire to be laid as mentioned below :- A) 1.5 sq.mm. X 16 core (Oral Surgery Department, 6th floor). |
| 6 | i) Surface on wall |
| 7 | ii) Through existing masonary trench |
| 8 | iii) Through Cable Tray |
| 9 | S&F Compression type gland complete with brass gland,brass ring & rubberring for dust and moisture roof entry of PVC/Ar. Copper cable as below :- |
| 10 | a) 1.5 sq.mm. X 16 core. |
| 11 | Finishing the ends of copper wire by socketing with pin/ring type copper socket and insulated tpes as reqd. As per G.S. |
| 12 | a) 2.5 & 1.5 sq.mm. |
| 13 | S&F 10\\" X 8\\" x 4\\" (250mm.X200mm.X100mm.) M.S.Box made out of 16 SWG CRCA sheet with 3mm.thick white colour bakleite cover on top including placing M.S.channel/ DIN Rail at the middle of the board and fix the board on surface on wall with 4nos. suitable size of M.S. Bullet fastner as per direction of EIC. |
| 14 | S&F 8\\" X 6\\" x 4\\" (200mm.X150mm.X100mm.) M.S.Box made out of 16 SWG CRCA sheet with 3mm.thick white colour bakleite cover on top including placing M.S.channel/ DIN Rail at the middle of the board and fix the board on surface on wall with 4nos. suitable size of M.S. Bullet fastner as per direction of EIC. |
| 15 | S&F 10 Amps Universal DIN Rail Mounted Feed Through Terminals in Polyamide 6.6 Housing Connector (Make : Elmex-KUTM2.5) as per IEC 60947-7-1 with End Plate, Shorting Link & Label Marker having double nut protection fixed inside the above box on existing MS channel/ DIN Rail firmly & rigidly for connection of all incoming & outgoing copper wires as per direction of E.I.C. |
| 16 | S&F 2-module Plexo Box & adaptor with PVC membrane (Legrand-680612) on surface on wall as per direc tion of EIC. |
| 17 | S&F 6A. 2-module bell push (Legrand-5734 59) to be fixed on plexo box complete with all necessary connections as reqd. as per direction of EIC. |
| 18 | S&F 10A. SP MCB (10kA 'C' curve) on existing SPN MCB DB complete with all necy. Connections (Legrand make) as per G.S. |
| 19 | S&F perforated G.I.cable tray of size 200X50x1.25mm.(18 SWG) fixed on wall with 25x25x3mm. angle iron support incl. G.I.nut, bolts & steel fastners as required and painting of MS support with anticorrosive black paint as per direction of E.I.C. |
| 20 | Cutting hole in concrete or wall incl.mending good the damages to bldg. Works as directed by EIC. |
| 21 | Hiring charges of Scaffolding arrangement including dismantling at the end of work for fixing of PVC/Ar.power control cable up to 3rd. floor as directed by EIC |
| 22 | Supply & Fixing of Name Plate of size 8\\" x 4\\" in different location within hospital campus. Made with 18 gauge thick (1.2-1.25 mm) Stainless Steel 316 grade Plate with RED Font colour, Content will be PANIC BUTTON in English, Font size to be 1 to 1.5 inch, installation methodology should be as per the location i.e screws for wood and masonry etc. and design details should be finalised and get approved by EIC. |
| 23 | Supply & fixing following sizes of medium gauge GI Pipe (ISI-Medium) protection with necessary fittings and jointing materials. |
| 24 | a) 80mm |
| 25 | Rate should be quoted incl. of all taxes and cess. |
| 26 | Defect Liability period : 1 year Please Enable Macros to View BoQ information |
