|
| 1 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan orsimilar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor. (a) 35 mm thick shutters (single leaf). |
| 2 | Supplying fitting , fixing decorative lamination conforming to IS-2046 : 1995 as per approved make, brand , finish and thick ness with fitting, fixing the same on Particle / MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-in-Charge. The rate includes the cost of labour, adhesive and all incidental charges thereof.in ground floor Glossy/Matt/Suede excluding surface texture of metallic lustre. (i) Thick ness of laminate 1.5mm. |
| 3 | Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S.205/66) and fitted and fixed with cadmium plated screws: (vi) 125 x 63 x 3.2 mm. |
| 4 | (i) Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete : (b) Medium (I.S.I. size 2). |
| 5 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S.230/72) fitted and fixed complete: (a) With continuous plate base (hexagonal/round rod). (vii) 150 mm grip x 12 mm dia rod. |
| 6 | P.V.C- False Ceiling :Providing False Ceiling made with framework of steel tube of 40mm x 20mm ofnot less than 18 gauge,the long and cross section will be welded with each other1000mm to 1200mm apart the entire framework will be fixed in wall usingrawlplug or gutties or screws etc. and suspended from ceiling with M.S flat19mmx3mm as necessary,the entire frame will be painted with red oxide.PRINTED LAMINATED P.V.C Section 150mm x 12mmx 1.00mm (+/- 0.01mm)of approved quality and colour will be fixed on the frame so that the entireframework will not be visible from below P.V.C Section will be fixed with theframe with the help of self tapping steel screws including all materials and labourcharges including fitting,fixing the same and hoisting including mending thedamages in all respect and cost of paint as required as per direction of Engineerin-Charge .In ground floor. |
| 7 | Supplying, fitting and fixing of false ceiling framework with powder coatedexposed G.I. grid suspension system (T-Grid T 2430/1510 or having loadcarrying capacity with mid span deflection not exceeding 1/360 span with hangerspacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVCDash Fasteners on the perimeter of the wall by steel screws with distance 300mmc/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will beinserted in the pre-cut slots of Main Runner at regular interval of 600 mm to forma modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall beplaced perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6mm dia G.I. wire from purlins / soffit. all complete as per drawing & directions of Engineer-in-charge. |
| 8 | (f) Supplying ,fitting & fixing Eco-friendly, Humidity Resistant and Incombustable Light Weight Calcium Silicate board/tiles (Density < 900 Kg per Cu.m.& Sound absorption NRC - 0.1 to 0.75) Conforming to BS 476 (Part IV, VI & VII) ofapproved design and brand placed in the grid module of size 600mm X 600mm toform a false ceiling, all complete as per drawing & direction of Engineer - in-Charge.False ceiling with15mm X 10mm Densified tegular edged Light weight Calcium Silicate tiles. |
| 9 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 10 | Ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttring and reinforcement, if any, in ground floor as per relevant IS codes. (a) Pakur Variety. |
| 11 | Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns,wall, facia,rise etc. with 15 mm thick [avg] cement mortar(1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing incement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging, curing androughening of concrete surface complete.[Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m]In ground floor. (a) Area of each Granite slab 0.6 to 1.0 Square meter. |
| 12 | Supplying, fitting & fixing granite tiles 10mm to 12mm. thick in columns, wall, facia etc. with 15 thick [avg] cement mortar(1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing incement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all completeas per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging ,curing androughening of concrete surface complete.[Using cement slurry at back side of tiles@ 4.4 kg/sq.m &white cement slurry for joint filling @ 1.8 kg/sq.m]Area of each slab upto 0.2 Sq.m. |
| 13 | Supplying fitting and fixing VGS-WHT-0312 decorative Couple Closet WC with cistern (Jaguar make couple closet W.C. size 810x405x730 mm. The rate including the cost of all materials, labour charges for scaffolding etc. complete in all respect as per direction of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
