Tender For Tender For Erection, Testing, Commissioning For Providing Sop To I.T.I Baijnath At Sakri In E-Section Sakri Uesd Kudail Under Ed Hpsebl Baijnath. Ts No. 32/2025-26, Kangra-Himachal Pradesh

TDR : 54473838

Tender Notice
BOQ

5 Days Left

Kangra , Himachal Pradesh

Tender Brief : Tender For Tender For Erection, Testing, Commissioning For Providing Sop To I.T.I Baijnath At Sakri In E-Section Sakri Uesd Kudail Under Ed Hpsebl Baijnath. Ts No. 32/2025-26

Document Fees
₹ 590 /-

EMD
₹ 14561.0 /-

Tender Value
₹ 14.56 Lakhs /-

Submission Date
13-03-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	New HT line
2	AAAC 7/3.81 mm (80mm²)
3	Steel Tubular Pole (9 mtr.)
4	Muffs with concerete filling
5	Run Thro' Structures (∆ Formation): on Single Pole Structures (Adopt Eight (8) No. Run -through Structures per Km)-
6	Cross Arm: [Channel Iron (100x50x6 mm), Length (1270) mm i/c tolerance of 100mm either side x 8 structure
7	Angel Iron (50x50x6 mm), Length (2x750) mm x 8 structure
8	Pole top Bracket
9	11 KV Pin Insulators (Porcelain, 12 KV, 10 KN): 3 No per pole structure
10	Dead End Structures: (Adopt three (3) No. per Km) on Double Pole (Prefer along road side)
11	Belt Set- MS Angle Iron : 50X50X6, Length 1800mm X 2 No.
12	X-Bracing Set - MS Angle Iron: 50x50x6, Length [2125 mmx 2 No.]
13	X-Arm (Horizontal)- MS Channel Iron: 100X50X6, Length 2340mm X 2 No.
14	Discs insulator sets on Dead End structures (comprising 1 No. Disc: (Porcelain, BS, 12 KV, 80 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides)
15	HT Stay / Guy Arrangement
16	Stay set complete in all repect (1 No. / Single Pole, 4 No. / Double Pole Structures)
17	Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set)
18	Earthing
19	HT Earthing set complete
20	GI 8 SWG Earth Wire
21	Cross lacing
22	Eye hook for Earth wire
23	Earth wire clamp
24	MS Channel Iron 75406, Length 1500 mm for earth wire
25	Half Clamp
26	Full Clamp
27	Danger Plate (250x200x1.6 mm)
28	Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)]
29	Barbed Wire
30	Alluminium Paint
31	Prov. Megger 5000 v
32	GO AB Switch Unit (11kV, 400A, 25 KA )
33	X-Arm: [Channel Iron (75x40x6 mm), Length: 2800mm x 4 No. for supporting GO Switch & DO Fuse Unit
34	Erection for HT line
35	Transportation for HT line
36	GST on Erection and Transportation Charges
37	New LT line
38	LT 3.5X120MM2 1.1 KV XLPE CABLE ARMOURED (double Circuit)
39	Steel Tubular Poles (8 mtr)
40	Muffs with concerete filling
41	Angle Iron (75x75 x6)mm2 length 1.50 mtr + 0.02 mtr
42	Capacitor Bank 36 kVAr
43	Cross Arm: [Channel Iron (100x50x6 mm), Length (1270) mm i/c tolerance of 100mm either side x 8 structure
44	LT Stay Set
45	Stay Wire (7/3.15 mm)
46	Full clamp [2 no. for A.I. 1no. For stay]
47	LT Cable Jointng kit for LV(tee and straight)
48	Cleat HDPE for cable support
49	Kit Kat I.C. 63 Amp
50	Earthing Set Complete
51	Pipe HDPE
52	Route and joint indicating stone
53	Cost of digging and restoratin charges
54	Nuts and Bolts of Various Sizes
55	Aluminium Paint
56	Prov. Tong tester
57	Erection for LT cable
58	Erection for Poles
59	Erection for LT Stay set
60	Erection for Earthing set
61	Transportation for LT line
62	GST on Erection and Transportation Charges
63	Distribution Transformer 250kVA
64	Distribution Transformer (Ordinary), 11/0.4 kV, 250 KVA
65	Steel Tubular Poles (9 m, Working Load > 200 kgf/m²)
66	Muffs with concerete filling
67	X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos]
68	MS Angle Iron (50x50x6 mm), Length : 2800 mm X 1 Nos] for LA's
69	X-Arm: [Channel Iron (75x40x4.8 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch
70	Transformer Bed, Belting & Knee Bracing
71	X Arm Channel Iron (100X50x6 mm), Length : 2800 mm x 2 Nos for Transformer Bed
72	X Arm Channel Iron (100X50x6 mm), Length : 460 mm x 2 Nos for supporting main channel of Transformer
73	MS Angle Iron (50X50x6 mm), Length : 2800 mm x 2 Nos
74	MS Angle Iron (35X35x5 mm), Length : 460 mm x 2 Nos
75	MS Angle Iron (50X50x6 mm), Length : 950 mm x 2 Nos for Bed Knee Bracing
76	CT-PT Combined Unit with HT meter
77	CT-PT Combined Unit [PT:11 kV/110 V) ; CT:10-400/5A]
78	Energy meter 3 Phase 4 Wire CT PT Operated HT Meter
79	PVC Multistrand 4 mm² copper wire with Φ-1 inch GI
80	X-Arm: [Channel Iron (100x50x6 mm), Length : 2800
81	X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm
82	X-Arm [Channel Iron (100x50x6 mm), Length : 460 mm
83	MS Angle Iron (50X50x6 mm), Length: 2800 mm x1 Nos
84	Transformer LT Distribution Box and G.O. fixing Assembly
85	MS Angle Iron (50X50x6 mm), Length : 2800 mm x 2 Nos
86	MS Angle Iron (50X50x6 mm), Length : 450 mm x 1 Nos
87	GO Switch Handle supporting (Channel Iron (75x40x6mm), Length 460mm
88	GO AB Switch Unit (11kV, 400A, 25 KA ) tripple Pole O/D type
89	D.O Fuse Unit
90	Surge Arrester, 9 kV Station Class (Porcelain Type)
91	Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.)
92	Stay set complete
93	Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set)
94	Pipe Earthing Set
95	LT Distribution panel box with MCCB and SFU for 250 KVA
96	Half Clamp (M.S. Flat 50X6 mm)
97	Full Clamps (M.S. Flat 50X6 mm)
98	Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)]
99	Aluminium Thimble
100	Aluminium Thimble
101	Danger Plate
102	Barbed Wire
103	LT Cable (3.5 Core) 185 mm²
104	Aluminium Paint.
105	LT Switched Capacitors 9 KVAr for 250 KVA (rate per KVAr)
106	Transformer Bed (Civil Work) & Chain Link fencing , Angle Iron ,Gate etc for transformer fencing
107	Erection charges for DTR
108	Transportation charges for DTR
109	GST on Erection and Transportation Charges Quantities are mentioned above are tentative and Actual Quantity shall be worked out after Check Survey to be carried out by the successful Tender and detailed Engineering and finalization of Tower location Chart.Payment shall be made as per Approved Bill of Material/Actual Quantities measured at site. Other Material like Distribution transformer, Poles (08 mtr & 09 mtr long), Full clamp, Half Clamp, LT & HT stay set, pole top bracket, Danger plate, Distribution panel box will be provided by HPSEBL Divisional Store. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Himachal Pradesh Tenders

Electrical Industry Tenders

Electrical Product Tenders

Electrical Products Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Tender For Erection, Testing, Commissioning For Providing Sop To I.T.I Baijnath At Sakri In E-Section Sakri Uesd Kudail Under Ed Hpsebl Baijnath. Ts No. 32/2025-26, Kangra-Himachal Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	New HT line
2	AAAC 7/3.81 mm (80mm²)
3	Steel Tubular Pole (9 mtr.)
4	Muffs with concerete filling
5	Run Thro' Structures (∆ Formation): on Single Pole Structures (Adopt Eight (8) No. Run -through Structures per Km)-
6	Cross Arm: [Channel Iron (100x50x6 mm), Length (1270) mm i/c tolerance of 100mm either side x 8 structure
7	Angel Iron (50x50x6 mm), Length (2x750) mm x 8 structure
8	Pole top Bracket
9	11 KV Pin Insulators (Porcelain, 12 KV, 10 KN): 3 No per pole structure
10	Dead End Structures: (Adopt three (3) No. per Km) on Double Pole (Prefer along road side)
11	Belt Set- MS Angle Iron : 50X50X6, Length 1800mm X 2 No.
12	X-Bracing Set - MS Angle Iron: 50x50x6, Length [2125 mmx 2 No.]
13	X-Arm (Horizontal)- MS Channel Iron: 100X50X6, Length 2340mm X 2 No.
14	Discs insulator sets on Dead End structures (comprising 1 No. Disc: (Porcelain, BS, 12 KV, 80 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides)
15	HT Stay / Guy Arrangement
16	Stay set complete in all repect (1 No. / Single Pole, 4 No. / Double Pole Structures)
17	Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set)
18	Earthing
19	HT Earthing set complete
20	GI 8 SWG Earth Wire
21	Cross lacing
22	Eye hook for Earth wire
23	Earth wire clamp
24	MS Channel Iron 75406, Length 1500 mm for earth wire
25	Half Clamp
26	Full Clamp
27	Danger Plate (250x200x1.6 mm)
28	Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)]
29	Barbed Wire
30	Alluminium Paint
31	Prov. Megger 5000 v
32	GO AB Switch Unit (11kV, 400A, 25 KA )
33	X-Arm: [Channel Iron (75x40x6 mm), Length: 2800mm x 4 No. for supporting GO Switch & DO Fuse Unit
34	Erection for HT line
35	Transportation for HT line
36	GST on Erection and Transportation Charges
37	New LT line
38	LT 3.5X120MM2 1.1 KV XLPE CABLE ARMOURED (double Circuit)
39	Steel Tubular Poles (8 mtr)
40	Muffs with concerete filling
41	Angle Iron (75x75 x6)mm2 length 1.50 mtr + 0.02 mtr
42	Capacitor Bank 36 kVAr
43	Cross Arm: [Channel Iron (100x50x6 mm), Length (1270) mm i/c tolerance of 100mm either side x 8 structure
44	LT Stay Set
45	Stay Wire (7/3.15 mm)
46	Full clamp [2 no. for A.I. 1no. For stay]
47	LT Cable Jointng kit for LV(tee and straight)
48	Cleat HDPE for cable support
49	Kit Kat I.C. 63 Amp
50	Earthing Set Complete
51	Pipe HDPE
52	Route and joint indicating stone
53	Cost of digging and restoratin charges
54	Nuts and Bolts of Various Sizes
55	Aluminium Paint
56	Prov. Tong tester
57	Erection for LT cable
58	Erection for Poles
59	Erection for LT Stay set
60	Erection for Earthing set
61	Transportation for LT line
62	GST on Erection and Transportation Charges
63	Distribution Transformer 250kVA
64	Distribution Transformer (Ordinary), 11/0.4 kV, 250 KVA
65	Steel Tubular Poles (9 m, Working Load > 200 kgf/m²)
66	Muffs with concerete filling
67	X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos]
68	MS Angle Iron (50x50x6 mm), Length : 2800 mm X 1 Nos] for LA's
69	X-Arm: [Channel Iron (75x40x4.8 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch
70	Transformer Bed, Belting & Knee Bracing
71	X Arm Channel Iron (100X50x6 mm), Length : 2800 mm x 2 Nos for Transformer Bed
72	X Arm Channel Iron (100X50x6 mm), Length : 460 mm x 2 Nos for supporting main channel of Transformer
73	MS Angle Iron (50X50x6 mm), Length : 2800 mm x 2 Nos
74	MS Angle Iron (35X35x5 mm), Length : 460 mm x 2 Nos
75	MS Angle Iron (50X50x6 mm), Length : 950 mm x 2 Nos for Bed Knee Bracing
76	CT-PT Combined Unit with HT meter
77	CT-PT Combined Unit [PT:11 kV/110 V) ; CT:10-400/5A]
78	Energy meter 3 Phase 4 Wire CT PT Operated HT Meter
79	PVC Multistrand 4 mm² copper wire with Φ-1 inch GI
80	X-Arm: [Channel Iron (100x50x6 mm), Length : 2800
81	X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm
82	X-Arm [Channel Iron (100x50x6 mm), Length : 460 mm
83	MS Angle Iron (50X50x6 mm), Length: 2800 mm x1 Nos
84	Transformer LT Distribution Box and G.O. fixing Assembly
85	MS Angle Iron (50X50x6 mm), Length : 2800 mm x 2 Nos
86	MS Angle Iron (50X50x6 mm), Length : 450 mm x 1 Nos
87	GO Switch Handle supporting (Channel Iron (75x40x6mm), Length 460mm
88	GO AB Switch Unit (11kV, 400A, 25 KA ) tripple Pole O/D type
89	D.O Fuse Unit
90	Surge Arrester, 9 kV Station Class (Porcelain Type)
91	Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.)
92	Stay set complete
93	Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set)
94	Pipe Earthing Set
95	LT Distribution panel box with MCCB and SFU for 250 KVA
96	Half Clamp (M.S. Flat 50X6 mm)
97	Full Clamps (M.S. Flat 50X6 mm)
98	Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)]
99	Aluminium Thimble
100	Aluminium Thimble
101	Danger Plate
102	Barbed Wire
103	LT Cable (3.5 Core) 185 mm²
104	Aluminium Paint.
105	LT Switched Capacitors 9 KVAr for 250 KVA (rate per KVAr)
106	Transformer Bed (Civil Work) & Chain Link fencing , Angle Iron ,Gate etc for transformer fencing
107	Erection charges for DTR
108	Transportation charges for DTR
109	GST on Erection and Transportation Charges Quantities are mentioned above are tentative and Actual Quantity shall be worked out after Check Survey to be carried out by the successful Tender and detailed Engineering and finalization of Tower location Chart.Payment shall be made as per Approved Bill of Material/Actual Quantities measured at site. Other Material like Distribution transformer, Poles (08 mtr & 09 mtr long), Full clamp, Half Clamp, LT & HT stay set, pole top bracket, Danger plate, Distribution panel box will be provided by HPSEBL Divisional Store. Please Enable Macros to View BoQ information

Tender For Tender For Erection, Testing, Commissioning For Providing Sop To I.T.I Baijnath At Sakri In E-Section Sakri Uesd Kudail Under Ed Hpsebl Baijnath. Ts No. 32/2025-26, Kangra-Himachal Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us