|
| 1 | Internal Electrical InstallationDismantling the Existing wiring after disconnection of all incomming & outgoing line, existing board etc. and kept in departmental store safely. |
| 2 | Supplying and fixing 415V, 63A, TPN SFU with Sheet Steel endosure on angle iron frame on wall with nuts bolts etc, ind. S&F 3 nos. DIN type HRC Fuse as per rating (Make: L&T/Havells/Standard) |
| 3 | Supplying & faxing sheet metal (16 SWG)(500x150mm) Iron Clad Al Busbar chambers on angle iron frame on wall, ind, earthing attachment and painting as required(As per Drawing no. 470 of PWD Specification BookMay 1991) 415 V, 63 A Al Bus Bar (4 x 20x5mm) |
| 4 | Supply & Laying 1.1 KV 4Cx10 sqmm unarmoured PVC/XLPE flexible copper cable through PVC flexible pipe on wall.( for meter & SFU loop/ Busbar loop) |
| 5 | Supply & Delivery of following size PVC insulated sheathed Al/XLPE armoured power cable of 1.1 KV grade. 4 Core x 25 sq.mm [Make Nicco/Polycab/RR] |
| 6 | Laying of following cable on wall/surface including S & F MS dams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc as necy, mending good damages and painting. For 3/4 core 25 sqmm |
| 7 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below. 4 Core x 25 sq.mm |
| 8 | Finishing of the XLPE/PVC /C insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, saldering materials, tapes etc. and making connection to switch, BDB and BBC etc. 4 Core x 25 sq.mm |
| 9 | Supply and fixing 415V 4 way, Double Door MCCB incomer VTPN DB with IP 42/43 protection, having 80 A adjustable Four pole MCCB as incomer 4 nos 40A-63 A TP MCB (10 KA) as outgoings, concealed in wall after cutting the wall/on angle iron frame on wall and mending good the damages to onginal finish induding ling interconnection and terminations with suitable size of copper wire, duly socketed by solderless Copper Socket and neutral link and provision for earthing attachment, as per direction of EIC (Make Legrand/ABB/L&T/Seimens] |
| 10 | Supply and Fixing 4 way double door horizontal TPN MCB distribution board with IP-42/43 protection, including 63A, 4 Pole MCB isolator as incomer, 12 Nos 10-32A SP MCB as outgoing concealed in wall after cutting the wall/on angle iron frame on wall and mending the good damages to original finish including inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make-Legrand/ABB/L&T/Seimens). |
| 11 | S&F 2+16 way double-door SPN MCB Distribution Board with IP-42/43 protection, with 240 V 40 A DP MCB isolator as incomer and 16 nos. 6-32A SPMCB as outgoing, concealed in wall after cutting the wall/on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.as per GS (Make -Legrand/ABB/L&T /Seimens) |
| 12 | Distribution wiring in 2 x 220.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand Polycab/ Finolex/RR/ Havells) in 20mm size PVC rigid conduit 'FR (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unisheathed copper wire for ECC, to lightifanicall bell points with Modular type switch (Brand Anchor Roma/ Legrand Mylink/ Crabtree) fixed on Modular Gil switch board with top cover plate and 2 no. suitable size \\"Ph & N copper bar & earthing attachment foxed on wall inci, mending good damages to original finish. Average run 8 mtr |
| 13 | Disin, wiring in 220.3 (1.5 sqmm) single core stranded 'FR PVC insulated & unsheathed single core stranded copper wire (Brand Polycab/ Finolex/RR/ Havells) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin 5 pin plug point ind. S&F 240V 6A 3 pin Modular type plug socket & Modular type switch (Brand Anchor Roma/ Legrand Mylink/ Crabtree) incl. S&F earth continuity wire, foxed on 4 Module Gil switch board with 3/4 Module top cover plate flushed in wall ind. mending good damages to original finish On board [PWD/GS Page: E-20 Item: 3 ] |
| 14 | Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand Polycab/ Finolex/RR/ Havells) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. 4 x 16 sq mm + 2X 10 sqmm. |
| 15 | Do………………Do………………….2 x 10 sq mm + 1X 6 sqmm. |
| 16 | Do………………Do………………….4 x 6 sq mm + 2X 4 sqmm. |
| 17 | Do………………Do………………..Do………….2 x 2.5 sq mm + 1X 1.5.[For power Socket] |
| 18 | Do………………Do………………..Do………….3 x 1.5 sq mm. |
| 19 | Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes 4 x 16 sq mm + 2X 10 sqmm. |
| 20 | Do………………Do………………….2 x 10 sq mm + 1X 6 sqmm. |
| 21 | Do………………Do………………….4 x 6 sq mm + 2X 4 sqmm. |
| 22 | Do………………Do………………..Do………….2 x 2.5 sq mm + 1X 1.5. |
| 23 | DO…..............DO….............DO….................3 X 1.5 [ sq mm] |
| 24 | Supplying and fixing 20 mm PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. |
| 25 | Supply & Fixing 240 V, 3 nos. 6 A, 3 pin Modular type plug socket & 1 nos. 6/16 A, 3 pin Modular type plug socket with 3 nos. 6A Modular type switch & 1 nos. 6/16 A, 3 pin Modular type switch (Brand Anchor Roma/ Legrand Mylink/ Crabtree), without plug top on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall/on wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 26 | Supply & Fixing 240 V, 2 nos. 6 A, 5 pin Modular type plug socket (Brand Anchor Roma/ Legrand Mylink/ Crabtree) with separate 2 nos. 6A Modular type switch, without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall/on wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 27 | Supply & Fixing 240 V, 1 nos. 6 A, 3 pin Modular type plug socket & 1 nos. 6/16 A, 5 pin Modular type plug socket (Brand Anchor Roma/ Legrand Mylink/ Crabtree) with separate 1 nos. 6A Modular type switch & 1 nos. 6/16 A Modular type switch, without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall/on wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 28 | Supply & Fixing 240 V, 1200 mm, 18/20 W, 110 lm/W single LED light fitting incl. LED Tube light (Fibre Body), suspended 25 cm bellow the ceiling with 2 No. 20 mm dia El conduit (14 SWG) supports fixed with \\"L\\" type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F El conduit, \\"L\\" type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [Make Philips/ Havells/Wipro/Crompton/Bajaj] (With 3 yrs Warranty) |
| 29 | Supply & Fixing 240 V, 1200 mm, 18/20 W, 110 lm/W Double LED light fitting incl. 2 nos. LED Tube light (Fibre Body), suspended 25 cm bellow the ceiling with 2 No. 20 mm dia El conduit (14 SWG) supports fixed with \\"1\\" type MS clamp whose one side fixed on coiling with sutable size 4 nos, fastener and other side connected with the conduit with suitable size of bolts and nuts ind. S&F El conduit, \\"1\\" type (125mmx125mm) 6mm thick and 25mm with MS damps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm) flexibile copper wire of 1.10 mt. length. [Make Philips/Havells/ Wipro/Crompton/Bajaj ] (With 3 yrs Warranty) |
| 30 | Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting-(As per Drawing no. 475 of PWD Specification Book-May 1991) [PWD/GS Page: D-14 Item: 29] |
| 31 | Supply & Fixing 240 V, <50 W, 320 RPM, 1200 mm sweep ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessaryconnection as required by 2x1.5 sqmm flexible copper wire. (Make Orient/Crompton/Havells) (With 2 yrs Warranty) |
| 32 | Supply & Fixing 240 V, 35 W, 920 RPM 225 mm sweep heavy duty AC exhaust fan on 16\\"x16\\" mm thick plywood, after making hole and mending good damages to original finish incl. S & F al. louver shutter as per direction of EIC Make Orient/EPC/Crompton/Havells) [Incl. for Lift =4] |
| 33 | Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand Anchor Roma/ Legrand Mylink/ Crabtree) on existing Modular Cl switch board with top cover plate ind. making necy, connections etc. [PWD/GS Page: E-18 Item: 10] |
| 34 | S&F Timer Control Unit for single phase AC Machine assembled with-8-way SPN DB Box (L&T/Cabtreel.egrand/Siemens/ABB)1 no. 32 A DP MCB Isolator (Make: Siemense/Legrand/L&T) Digital 24 hour lime switch (GICA&T)-1 no.32A three pole contactor (L&T)-01 no.Centre off 2 way toggle switch. 1 no. 32Amp. Barirrer type terminal-1 no.LED indicating lamp (L&T: SIL R240V)-01 No. 2X4sqmm+2.5sqmm copper wire 0.5 Mtr. with complete interconnection with auto-mannual bypass arrangement with locking arrangement incl. making/cutting door of SPN DB box for fixing arrangement of toggle switch, Locking arrangement, LED Indicator elc, as required as per direction of EIC. [ For Compound Light-1] |
| 35 | Supply & Delivery of following size PVC insulated sheathed Al/XLPE armoured power cable of 1.1 KV grade. [Make Nicco/Polycab/RR] 2 Core x 6 sq.mm (from DB to Security light) |
| 36 | Laying of following cable on wall/surface including S & F MS dams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc as necy, mending good damages and painting. Upto 2 core 25 sqmm |
| 37 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below 2 Core x 6 sqmm |
| 38 | Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc. 2 Core x 6 sqmm |
| 39 | Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand Polycab/ Finolex/RR/ Havells) of the following sizes in the prelaid polythene pipe and by the prelaid Gt fish wire and making necy, connection as requared2 x1.5 sqmm + 1 x 1.5 sqmm (For Securty Light] |
| 40 | Finishing of the PVC insulated wire ends by sockettling with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes 2 x 1.5 sq mm + 1X 1.5 sqmm |
| 41 | Supplying and fixing 20 mm PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. |
| 42 | Supply & Fixing 240 V, 70 W, 100 lm/W only outdoor/street light type fifting complete with all accessories to be fixed/projected from the wall of the building inct, making holes/providing clamping arrangement & necy. Gi reducer as required. 5&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necу. 43 length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. [Make- philips/Havells/ Wipro/Crompton/Bajaj] (With 5 yrs warranty) |
| 43 | Supplying & Fixing Gi waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat Fuse unit, one NL, on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted Gl top cover with brass machine screws elc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint. |
| 44 | Earthing Installation with Pipe Electrode: Excavation of soil for installation of Earth Electrode and filling & ramming. For Solt Soil [PWD/GS Page: G-1 Item: 11 |
| 45 | Earthing with 50 inm dia Gl pipe 3.64 mm thick x 3.04 Mts.long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm diax 80 mm long Gl bolts, double nuts, double washers incl. S & F 15 mm dia Gl pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:By TATA-Medium Gl pipe [2 nos. for El, 2 nos. for Feeder Pillar, 9 nos. for Street Light Pole,] |
| 46 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) Cl hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, Gl reducer including drilling of 46 nos.12 mm dia holes on the Gl pipe. [PWD/GS Page: G-2 Item: 3/a] |
| 47 | Earth BusbarSupplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall 48 having clearance of 6 mm from wall including providing drilled holes on the busbar complete with Gl bolts, nuts, washers, spacing insulators etc, as required. [PWD/GS Page: G-2 Item: 4/c) |
| 48 | Earth Continuity StripConnecting the equipments to earth busbar induding S & F 20 mm x 3 mm Galvanised (Hot Dip) MS Flat on wall/ floor with Gi saddles as required and connection to equipments with ind. drilling holes, bolts, nuts, washers etc. [PWD/GS Page: G-3 Item: 5/c] |
| 49 | N.B: i) Payment will be made after availability of fund from concern Department.ii) Payment will be made as per P.W.D norms.iii) Rate should be quoted including All Taxes and Cess. Please Enable Macros to View BoQ information |
