|
| 1 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 5m as directed. (Details in bill) |
| 2 | Cement Concrete with graded stone (30 mm size) excluding shuttering. In ground floor and foundation. (a) 1:3:6 proportion |
| 3 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes. In Ground Floor : (ii) River Bazree |
| 4 | PWD(WB), BUILDING WORKS, Page-16, Item-16 125 mm th. brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 5 | PWD(WB), BUILDING WORKS, Page-114, Item-1 © Wood work in door and window frame fitted and fixed complete including a protective coat of painting at the contact surface of the frame. At 1st floor.(The quantum should be corrected upto three decimals) Sal : Siliguri |
| 6 | PWD(WB), BUILDING WORKS, Page-123, Item-10(b)(iii) Z-batten shutter of door and window as per design having tongued and groove half lap joint as per direction of the E-I-C including fitting and fixing shutter in position,but excluding the cost of hinges and other fittings in 1st floor. B) Shutter with 19 mm thick planks 19 mm thick battens. Sisu, Gamar, Champ, Badam, Bhola, Morga, Hallak |
| 7 | PWD(WB), BUILDING WORKS, Page-189, Item-1 Plaster (to wall, floor, celling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface] (ii) With 1:4 cement morter (b) 10 mm thick plasterb) 10 mm thick |
| 8 | PWD(WB), BUILDING WORKS, Page-48, Item-6 Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour.In ground floor 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). i) 20 mm. Thick |
| 9 | PWD(WB), BUILDING WORKS, Page-140, Item-4© Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) 40 mm.x 6 mm. 125 mm. length. |
| 10 | PWD(WB), BUILDING WORKS, Page-141, Item-8 Iron socket bolt of approved quality fitted and fixed complete. 100 mm long x 10 mm dia bolt |
| 11 | PWD(WB), BUILDING WORKS, Page-145, Item-28 Anodise aluminium Aldrop/Sliding bolts of approved quality manufactured form extruded section conforming to I.S. specifictation (I.S.2681/66) fitted and fixed complete 250 mm x 16 mm dia. bolt |
| 12 | PWD(WB), BUILDING WORKS, Page-145, Item-30 Anodised aluminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S.230/72) fitted and fixed complete:. With continuous plate base (hexagonal/round rod) 125 mm grip x 10 mm dia rod |
| 13 | PWD(WB), BUILDING WORKS, Page-140, Item- 5 Iron butt hinges of approved quality fitted fixed with steel screws, with ISI mark 100 mm x 50 mm x 1.25 mm |
| 14 | PWD(WB), BUILDING WORKS, Page-192, Item-15 Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. |
| 15 | PWD(WB), BUILDING WORKS, Page-104, Item-13 a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (ii) Grill weighing above 16 Kg./sq.mtr and above |
| 16 | PWD(WB), BUILDING WORKS, Page-197, Item-15 Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. In Ground floor: (iii) Two coats. |
| 17 | PWD(WB), BUILDING WORKS, Page-200, Item-1(b) Priming one coat on timber or plastered surface with synthetic oil bound prinmer of approved quality including smoothening surfaces by sand papering etc. |
| 18 | PWD(WB), BUILDING WORKS, Page-200, Item-1(a) Priming one coat on steel or other metal surface with synthetic oil bound prinmer of approved quality including smoothening surfaces by sand papering etc |
| 19 | PWD(WB), BUILDING WORKS, Page-200, Item-2(a) (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. including using of approved putty etc. on the surface, if necessary. (a) On timber or plastered surface: With super gloss (hi-gloss) iv) Two coats (with any shade except white) ) Lum sum ( Details in bill ) |
| 20 | PWD(WB), BUILDING WORKS, Page-200, Item-2(a) (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. including using of approved putty etc. on the surface, if necessary. (b) On steel or other metal surface: With super gloss (hi-gloss) iv) Two coats (with any shade except white) - Lum sum ( Details in bill ) |
| 21 | PWD(WB), BUILDING WORKS, Page-107, Item-20(b) Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. (b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only] |
| 22 | PWD(WB), BUILDING WORKS, Page-101, Item-2(A) ( 3rd Corrigenda Addenda) M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. b) Span upto 12 Mtr Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or partthereof. |
| 23 | PWD(WB), BUILDING WORKS, Page-81, Item-9 Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) (i) In Roof:- a) With 0.60 mm thick sheet |
| 24 | PWD(WB), BUILDING WORKS, Page-81, Item-10 Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping) (B) 300 mm lapping each way (a) With 0.60 mm sheet |
| 25 | PWD(WB), BUILDING WORKS, Page-11, Item-8 Taking out carefully GCI or CI or Asbestos sheets (including Ridges etc.) from roof or wall after unscrewing bolts nuts screws etc. and stacking the materials at site as directed. |
| 26 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. a) 40 mm dia tubewell up to 150m depth. |
| 27 | Supply of G. I. pipes of TATA make including necessary sockets at work site . ii) 40 mm dia medium quality |
| 28 | Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007 ii) 40 mm dia medium quality |
| 29 | Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications.. (each Straineer 3.0 m long) ii) 40 mm dia medium quality |
| 30 | Supplying fitting and fixing PopularMayaPump No-6 or similar.ii)for 40 mm dia tube well . |
| 31 | Supplying fitting fixing Steel Cutter piece up to 450 mm long with socket.(i) 40 mm dia. |
| 32 | Construction of 1.5 m X 1.5m size tubewell platfrom & 1.50 m long Drain with 200 mm thick cement concrete (1:2:4) with 20 mm down graded stone chips over a polythine Sheet including 150mm x125 mm thick parapet with cement concrete (1:2:4)in all sides of the platfrom and also in the base of the tubewell including 15 mm thick (4:1)cement plaster with 1.5 mm neat cement punning & 1 m depth well ring Shok Pit with cover on all surface complete.(Details sheet atteched) |
| 33 | Supplying fitting and fixing of Signboard and cost of photograph (payment will be made as per voucher) |
| 34 | Add:- GST @ 18% |
| 35 | Add:- Labour Welfare Cess @ 1% Please Enable Macros to View BoQ information |
