|
| 1 | Earth work in excavation by Hydraulic excavator capacity 60cum/hour including all lead and lift, cost of driver/Assitant driver, POL, maintanence of Machine and contractor profit, taxes etc but excluding leveling, dressing and compaction etc. as per direction of Engineer-in-Charge. |
| 2 | Earth work in filling by power transport for a lead of upto 1 km including excavation loading unloading manual compaction and dressing including all lift shall be applicable for lead upto 1 km excluding royalty etc. as per direction of Engineer In charge. |
| 3 | Providing and Laying of Mzp stone boulder in Mechanically Woven Double Twisted Hexagonal Shaped BIS Standarad class II polymer coated G.I. wire crates as per IS code 16014 : 2024 of required sizes 3.00x1.00x0.45m (2 No. diaphragms size 1x0.45 across the length of Gabion) Mesh Type 10.00x12.00cm having Mesh Wire dia. 2.7/3.7mm (ID/OD), edged/Selvedge dia 3.4/4.4mm (ID/OD) with partitions at every 1m interval and shall have minimum 10 No. of opening per mtr. of mesh perpendicular to twist tying with lacing wire of dia 2.2/3.2mm (ID/OD) of construction of launching apron and Gabion wall including all material, labour, T&P, carriage, loading, unloading, Royalty, all taxes but excluding GST etc. and tying with red /green /white colour lacing wire of polymers coated wire crate all complete as per directions of engineer-in-charge. |
| 4 | Providing and Laying of Mzp stone boulder in Mechanically Woven Double Twisted Hexagonal Shaped BIS Standarad class II polymer coated G.I. wire crates as per IS code 16014 : 2024 of required sizes 3.00x2.00x0.45m (1 No. diaphragm size 3x0.45m along the gabion length and 2 No. diaphragms size 2x0.45 across the length of Gabion) Mesh Type 10.00x12.00cm having Mesh Wire dia. 2.7/3.7mm (ID/OD), edged/Selvedge dia 3.4/4.4mm (ID/OD) with partitions at every 1m interval and shall have minimum 10 No. of opening per mtr. of mesh perpendicular to twist tying with lacing wire of dia 2.2/3.2mm (ID/OD) of construction of launching apron and Gabion wall including all material, labour, T&P, carriage, loading, unloading, Royalty, all taxes but excluding GST etc. and tying with red /green /white colour lacing wire of polymers coated wire crate all complete as per directions of engineer-in-charge. |
| 5 | Providing and Laying Geo textile sheet 200 GSM woven multiflament polyproylene yarn below pitching with pegs including preparation of surface including all material labour T&P and all taxes but excluding of GST etc. for completion of work as per direction of engineer-in charge. |
| 6 | Providing and laying of Cartage Earth 15.00cm thick over Geo textile sheet in slope pitching including cost of all material, labour,T&P and all taxes but excluding GST etc. as per directions of engineer-in-charge. |
| 7 | Providing and Laying of Mzp stone boulder of construction of slope pitching including all material, labour, T&P, carrage, loading, unloading, Royality, all taxes but excluding GST etc. all complete as per directions of engineer-in-charge. |
| 8 | PCC M-15 , 10mm to 20mm size crushed stone grite with cement coarse sand F.M. not less than 2.00 including cost of all material, labour,T&P etc complete. |
| 9 | Centering and Shuttering for RCC/R.B. works including cost of all material upto 3m height, labour,T&P and all taxes but excluding GST etc. as per directions of engineer-in-charge. |
| 10 | RCC M-25 , 10mm to 20mm size crushed stone grite with cement coarse sand F.M. not less than 2.00 including cost of all material, labour,T&P etc complete. |
| 11 | Cutting, bending, binding and placing of reinforcement including cost of binding wire in position of steel,12.00mm Ø and above mild steel/M.T including cost of all material, labour,T&P and all taxes but excluding GST etc. as per directions of engineer-in-charge. |
| 12 | Providing and filling Local sand for base of foundation including cost of all material, labour,T&P and all taxes but excluding GST etc. as per directions of engineer-in-charge. |
| 13 | Providing and filling Filter material for base of foundation including cost of all material, labour,T&P and all taxes but excluding GST etc. as per directions of engineer-in-charge. |
| 14 | Hiring of 5HP diesel pump for dewatering work for construction of regulator includingOperator and POL for running hours etc all complete |
| 15 | Providing & Fixing in position of diamond seal in copper material (0.50m width) for flexible joint at box culvert and wing wall including cost of all material,labour ,T&P etc. as per directions of engineer-in-charge. |
| 16 | Mechnical work Please Enable Macros to View BoQ information |
