|
| 1 | Distempering two coats to the wall surface with any approved shade over a coat of chalk wash including cost of distemper with conveyance of allmaterials and labour with T&P required for the work with Cess etc, complete in all respect as per direction of Engineer-in-charge. |
| 2 | Finishing wall surface two coats with any approved weather shield cement paint over a coat of oil bound primer to outer wall surface after celaning surface including cost of paint and primer watering curing with cost conveyance of all materials and labour with T&P and Cessrequired for the work etc, complete in all respect as per the direction of Engineer-in-Charge. |
| 3 | Supplying & Providing, of M.S. panneled Door double leaved with MS frame and grill over all sized including frame made out of following materials conforming to relavant ISS frame 35x35x6mm M.S. Angle window panel 1.00mm C.R.sheet panel stiffener convering width of each leaf 19x5mm M.S flat 2 Nos of each leaf hinges size 100mm 4 nos (2 nos an each side) bought out ofISS hold fast 35x35x6mm M.S. angle 100mm length bifurcated tip 2 nos on one side handle 19x5mm flat 2 Nos fabricated (Inside) tower bold 4 Nos bought out as per ISS including cost,conveyance, of all materiasl andwith T&P & Cess in all respect and as per direction of Engineer In Charge. (Door) |
| 4 | Supplying & providing, of M.S. window grill made out of M.S flat conforming to IS No -1977/1996 as per the design approved with cost, conveyance &of all materials & labour with T&P & Cess in all respects as directed by the Engineer-in-Charge. |
| 5 | Labour for fitting,fixing of M.S. Door/ Window shutters as per approved design including cost of screws with cost of all labour, T&P and Cess required for the work etc, complete excluding cost & conveyance of M.S.Door/Window in all respects as directed by Engineer-In-Charges. (Door) |
| 6 | Labour for fitting and fixing of M.S.Window grills including cost of screws with cost of all labour, T&P and Cess but excluding cost and conveyance of M.S.Windowgrilletc, complete as per direction of Engineer-in-Charge. |
| 7 | Painting two coats with any approved paint over a coat of priming to Iron work including cost of the primer and paint sand papering polishing the surface with cost conveyance of all materials and labour with T&P required for the work with Cess etc, complete as per the direction of the Engineer-In-Charge. |
| 8 | Supplying,fitting & fixing vetrified floor tile of premium grade having thickness 8mm to 10mm conforming to 13756 ofsize 60Cm x 60Cm plain (Ivory) in floor with applicationof polymer modified quick set cement based water resistant adhesive conforming IS:15477 of 10 mm thick bed and filling joints with white cement of approved quality including cost,conveyance of all materials, royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges labour,Cess, T& P etc required for the work complete in all respect as per specification and direction of Engineer-in-charge. |
| 9 | Supplying,fitting & fixing vetrified tile in dadoes of size 600mm x 600mm of approved make conforming to IS:13755laid on 20 mm thick cement mortar 91:4) (1 cement:4 course sand) and filling joints with white cement of approved quality including cost of all materials, royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges and labour, T &P & Cess etc required for the work complete as per direction of Engineer-In-Charge. |
| 10 | Cement concrete of proportion (1:2:4) using 12mm (1/2\\") size clean crusher broken grantie chips of approved quality from approved quarry including hoisting lowering and levelling in position to required level including frame work where necessary ramming and levelling cruing dewatering with cost conveyanceand royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, & labour of all materials including hire and running charges of machineries T&P required for the work with Cess etc, complete as per specification and direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
